Cant revert back controller path through personalization after extension?

Hi All,
I have extended CO of self service page
Name:/oracle/apps/per/selfservice/competency/profile/webui/SearchQueryCO
page path:/oracle/apps/per/selfservice/competency/profile/webui/SearchPG
Of SearchFilterRN as xxSearchQueryCO
Now I am reverting back the controller from page personalization.
But It is not reverting back to seeded CO and getting the extended CO.
Please Help.Really Urgent.
Regards,
SHD
Edited by: SHD on Apr 1, 2011 3:42 AM

After mentioning the seeded CO, clear application cache using functional Administrator responsibility.
Functional Administrator - > Core Services Tab -> Caching Framework sub tab -> Global COnfiguration -> Click on "Clear All Cache" button - > Click on "yes" button
-Anand

Similar Messages

  • How long can you revert back to the original photo after cropping?

    Is there any time limit for how long can you revert back to the original photo after cropping? Are you always able to revert back?
    Thanks.

    DAM = "Digital Asset Manager", a fancy name for a filing system.
    iPhoto keeps the original and makes one (usually much smaller) copy based on your edits. It is non-destructive in that if you crop, and later change the color, iPhoto will go back to the original and apply the corrections to get the new image, it will not simply modify the preview.
    If you want a high quality copy of the image, use the export function which allows you to specify the size and compression.

  • Cant revert back to Win 98 after Win XP

    I have been running Win XP Pro on my MSI KT133a Pro mobo.  Been running well, but I play Everquest.  And Everqeust(EQ) does NOT like Win Xp any thing.  SO, I was told to reformat and reinstall Win 98, and dual boot to WIn XP.  Ok cool.  So I format, and proceed to install Win 98.  Well, after about 10 attempts, I cant get Win 98 to load.  I get the 2nd blue install screen and i get errors saying cant write to disk, fatal exemption, you name it.  So, I try Win Xp again it installls perfect.  But that is not what I want. I need Win 98 back on it.  So I try again, same results no go will not install.  Ok, I go to antoher machine get it to install Win 98. I finally get Win 98 installed.  I change back over to the MSI mobo machine (was Win XP but now, via a differnet pc trying WIN 98 on it now), i start the machine up.  Cool it boots get screen welcome to windows etc, I start to load drivers.  Video first,  BUT, I cant get my AGP drivers to work now.  PCI fine, AGP no go.  I did download the latest 4.33 version of VIA 4in1 drivers from this site and I installed.  Once they load, PC starts to enter a LOOP reboot after I see the Splash Win 98 screen.  I cant even boot into safe mode.  All I get is Splash screen, reboot, splash screen , reboot, etc etc etc.
    I have taken all hardware out ther than memory, video and hard drive/cpu of and stil same problem.  Only way I get win 98 installed is by using a different motherboard!  What the heck??!  SO, I take harddrive out, put it on another athlon machine, and oh my it loads. hmmm.. put it back on my MSI board, reboot reboot reboot.  
    It appears my MSI board will now only accept Win XP Pro as its OS.  How can this be?  How can I fix the board to forget Win XP was ever on it?  Any of you out there have same problem?  Win ME does the same thing, no go.
    BTW, i HAVE reset bios, updated BIOS with newest from this site, taken battery out, unplugged machine, tried a different processor, tried 4 different harddrives, tried  PCI vid, tried 3 diff AGP cards, I have run out of ideas.  PLEASE help me!!!
    System:  Athlon XP 1900+
                   MSI K7 Pro2 KT133A mobo
                   1.3 gb SDRAM PC 133
                    SB Audigy Gamer
                    Gainward 128MB GeForce 3 Ti200
                    Linksys lan card ver 5.0
                    Western Digital Caviar 7200 80G harddrive
                    Hewlet Packard 9200i CD ReWriter
                    Toshiba 3.5" floppy
                    (now these are what are noarmally in machine during the time I had Win Xp PRo on it.  I have tried all kinds of different parts in this machine even changed out ram trying to get mobo to forget it was ever an XP Machine)
    Please any suggs!!!!

    When you fdisked the drive did you also do an fdisk /mbr
    If XP  is hiding anything like a boot loader it could be there.
    Also try using another hard drive if you have one laying around dosent have to large just enough to install 98 on.
    If you can do that then you know its something up with that hard drive as oposed to the Mobo.
    Also if you can get your hands on the latest partition magic ive heard that xP does some nasty things to hard drives if you use their new formating for the drive.
    javascript:smilie(':D')
    Big Grin

  • InDesign reverting back to basic colour scheme after crash

    I am new at this software, how do I get my orignal colours on my design back - also the printers come up with different colours

    Which version of InDesign are you working with, and which platform? I cannot reproduce the behavior you describe (I tried with Image Sequence in CC 2014 Mac) even after saving, closing the doc, and reopening.

  • I cant log into my iCloud through windows app. I cant see backed up photos through the online iCloud

    When I try to login to iCloud though the windows app I just get the spinning login wait icon and nothing happens. It will stay like this all day.
    Here is the screen I get:
    I can login to my iCloud online but it doesn't show my backed up pictures from my iPhone and iPad which should be there and which it is saying it is backing up.
    I have tried re-installing and also changing my password through Forgot apple ID or password?
    Can anyone help with this? I have full permissions on my machine and admin rights
    Thanks

    You can't see your iCloud backup on icloud.com.  You can only access the backup by restoring it to your iPad.
    You can import your camera roll photos to a computer as explained here: http://support.apple.com/kb/HT4083, then transfer them to a USB memory stick if that's what you're asking.  You can also upload them to another cloud service so they are backed up, such as Dropbox.  (If you open a free dropbox account, you can use the free dropbox app to automatically upload your photos to your account.)

  • How to revert back to OS5 on bold2 after upgrading to OS6

    the upgrade has made  my phone very slow to respond and keeps hanging
    Solved!
    Go to Solution.

    if you did the wireless upgrade or automatically through the BlackBerry Desktop Software, you can skip step 1.
    1. Delete the newer OS from your PC by going to Control Panel >Add/Remove Programs.
    2. Then download and install the older version of the OS. BlackBerry Operating System Downloads
    3. Install the older OS to the PC by running (double clicking) the file you downloaded.
    4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
    5. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1349 Hi, Ive got runkeeper as an app my phone ran out of charge I know cant get back into my runkeeper app after putting in email and password.Whats the problem.I also cant use either.

    Hi,
    I continue to have trouble with logging into my apps.Signing in on my runkeeper.
    I put in my e-mail and it syas error.Ive written down my address and password so
    I know it but its not letting me in so what can I do people.
    wayne
    <Personal Information Edited by Host>

    It is a REALLY BAD idea to post your email addresses and password on a worldwide public forum.
    If you have used these login details ANYWHERE else, please CHANGE THEM ALL IMMEDIATELY.
    I have asked the forum hosts to remove the details, but its already too late. Once something is posted on the Internet it cannot be completely deleted.

  • Stuck in Lion installation *LIMBO* - disk damaged, disk wont repair, disk is locked, wont revert back to snow leopard

    I'm stuck in Limbo.  I cant complete the install and cant revert back to snow leopard.  All I have are the installer utilites (including safari).
    I'm running a summer 2009 release macbook pro 17 inch.  I downloaded the Lion install app and proceeded to follow the instructions and guided.  After less than a minute the install stopped to say that it could not be completed because the hard disk is damaged and can’t be repaired.
    So...I went to disc utility to verify the disk and this is what I got. 
    Verifying volume “Macintosh HD”
    Checking file systemPerforming live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Incorrect number of file hard links
    Bad hard link creation date
    (It should be 3325742596 instead of 3340504404)
    Hard link record has data extents (id = 2888169)
    Checking multi-linked files.
    The volume Macintosh HD could not be verified completely.
    Error: This disk needs to be repaired. Click Repair Disk.
    So I put in my Snow Leopard disk and went to repair disk.  Now, THIS is what I got.
    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    So then I wanted to go back to Snow Leopard at least, but I cant.  When I go to “Startup Disk” and select my Mac 10.6.8 drive, it says:
    You can’t change the startup disk from the selected disk. 
    Startup Disk could not gather enough information on Selected Disk.
    So that’s annoying because it keeps me stuck in that installation "limbo" - not able to finish installing and not able to go back. 
    I restarted, holding down the OPTION key, but it only gave me one boot selection - the installer itself. 
    So then I try yet again to install this thing because there’s not much else I can do...but now it won’t even start installing...when the installer screen asks which drive I want to install it on, for which I would of course choose my Macintosh HD, it says in subscript underneath Macintosh HD:
    “This disk is locked”  and it wont let me select the “continue” button to begin the installation.
    Please help, someone.  

    phew, just got everything back to "normal"
    I turned off my mac for about 10 minutes and then started it up again.  Also I think this time i inserted my snow leopard disc at just the right time, not too early not too late.
    Whatever it was, when i went to "Startup Disk" the snow leopard disc showed up!
    So then I went to disk utility after booting the snow leopard installer for the first time.  It said it repaired one thing but then stopped and said it couldnt repair it and told me to back up and reformat.
    Then I just ran a simple verify again and it said the HD was "OK" - it gave me a clean bill of health?!?!
    So then I went to startup disk again, and was finally able to get out of limbo and back to good old snow leopard.
    Now I'll install Lion, but taking all cautions beforehand...maybe i'll wait a few days first though.
    Thanks to everyone.

  • Retrive image path of image after cameraRoll addBitmapData

    Is it possible to retrieve the image url of image which added to the CameraRoll via  addBitmapData ?
    Thanks,
    Nimrod Sion

    That doesn't have anything to do with retrieving the imagepath after adding to the camera roll sirdragoon....
    The only thing I can think of for this is that 1) you cant trace back the path to the camera roll for iOS because of how closed their system is and 2)the android path would always be the same once you find out the initial path.  I do not think actaully adding the image to the camera roll will return the path unfortunately.  You will have to open up the browseforimage method and trace out the images path from the return mediapromise (For Android).

  • Loss of Internet connection through TC after sleep.

    I have a Netgear ADSL Wireless modem which is connected to a TC in bridge mode.
    So here is what happens, I am connected wirelessly to the TC and can access the internet no problem. I then put the MacBook Pro to sleep, then on waking the MacBook I have no internet connection. But if I select the wireless network of the Netgear I do have an internet connection. The MacBook then at some point reverts back to the TC wireless network and all works OK. I think it reverts back to the TC network after a sleep period.
    It does not do this every time but it does it enough to have become annoying.
    I presume that on those occasions that I have no internet connection through the TC that this is because the TC is otherwise occupied?
    Is there a way to cure this problem?
    Phil

    Hi Larry,
    If you go to Control Panel -> Network Connections (For Vista and Windows 7: Network and Sharing Center) -> Double click on your Network Adaptor (Vista and 7: Top left hand corner of the Network and Sharing Center, click on 'Change Adaptor Settings' and double click on your adaptor. Click Properties and scroll down to 'Internet Protocol Version 4 (TCP /IPv4), click Properties and make sure that 'Obtain an IP Address automatically' and Obtain DNS server address automatically' are ticked. Click Ok, then OK, then finally close. Check to see if you have connectivity. If you don't, go to start, in Run (Or in the search bar) type 'cmd'. Once Command Prompt opens, type 'ipconfig /flushdns'. Close Command Prompt and check again. If you still don't have Internet connectivity, go to Internet explorer and click Tools -> Internet Options (If you have Internet Explorer 7 or 8, press Alt before looking for tools. This will make the bar appear). Go to the Connections Tab and click on 'Lan Settings'. Make sure that you do not have 'Use a proxy server for your LAN' ticked. Also make sure that you have 'Automatically Detect Settings' ticked. Once you have done this, click Ok, Apply and Ok and check again for connectivity. If this didn't resolve your problem please post back
    Sorry for the long answer
    Cheers
    Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

  • DNS reverting back to old settings

    We are in the process of upgrading our Active Directory to Windows Server 2008 R2, from 2003.
    There is a new primary and secondary DNS that we're still in the process of changing across all servers and devices that require DNS settings to be specified.
    It has worked successfully on most servers and devices, however on other servers, for example Unix and Linux type virtual machines the DNS reverts back to the old settings after they are changed resulting in the server continuing to query the old DNS server
    and not the new one.
    I've been through the forums to find the answers but haven't found a lot of matches and want to explore all possibilities as to why this could be happening from the 2008 AD perspective before looking at the OS level.
    Has anyone come across anything like this?
    I'd be most interested to hear how you fixed it and what the cause is.

    I am having this same issue within my organization. Some servers change while others don´t. What is unique about my situation is that it´s all Server 2003 physical servers, no issues with 2008 and any flavor VM. Here is what I´ve tried thus far on one of
    the servers to attempt to remedy this but none of these have worked (for me at least):
     In no particular order
    Restarted the DNS Client Service 
    Did a full Virus/Malware scan
    Checked for any applications that could be changing the DNS settings
    Repaired NETSTACK
    Installed updated network drivers
    Changed the DNS settings with a local admin account (non-domain admin)
    Applied a Flush DNS on all of the servers after changing to the new DNS settings
    Removed the old DNS servers from the Name Servers tab in the SOA record in DNS Manager on the primary DNS server
    Scavenged Stale Resource Records on both the old and new DNS Servers
      I hope some of this info is helpful to you, I´ve combed the internet for any info on this issue but found very little. I also hope you find a fix! Peace. 

  • Every time I open an app it reverts back to the icon screen

    Every time I open an app it reverts back to the icon screen after a minute or so, sometimes almost immediately. Any ideas about what is going on? I have both wifi and 3G so I don't think it is an Internet problem. Thanks!

    Try a hard reset first. Press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. 
    If still no luck, try downloading and installing a new app from the App Store.  Doing so has cleared the issue up for several users.
    B-rock

  • What is the best method to revert back to 'golden' image of database

    Hello,
    I want to have a 'golden' image of my test database. What is the best method to keep reverting back to this 'golden' image after testers are done with testing. What I mean is I want to set up a test database for testers. Testers can insert,update, delete on objects as they like. But after the testers have completed their testing, I want to revert the database back to the 'golden' image. This 'golden' image is the state of the database before testers perform their tests. I need to revert back to the 'golden' image many times over as we have to perform many different tests.
    I thought about export and import (9i database) but takes 6 hours, too long. I tried using rman and was successful the first time, (set until time; restore database; recover database; open resetlogs;). The seconde time using rman, I got error saying the set until time was before the resetlogs time. I think I would have to restore the control file before the resetlog time frame before I can recover to the set until time, again.
    What is a straight forward method to have a 'golden' image so I can keep on restoring back to it? This database is a test 9i database and it is in archive log mode but it doesn't need to be. I just need a best practice method, whether it is rman, exp/imp, manual backup/restore? Something I can use time and time over again. Thank you.

    If it is a Test envionment, can you just take a COLD Backup (database files
    plus control files) ? How big is the database ? What platform is it on ?
    eg in a COLD Backup
    a. If using a script, run multiple "cp" (or cpio/tar) commands in parallel to
    copy different database files
    b. If using RMAN (in NOMOUNT), use multiple Chnanels.
    Note : Remember to include ControlFile Backups and Restores as well.

  • How can I Revert back to IOS7 from IOS8?

    Hi Folks,
    Is there a way that I can revert back to IOS7 from IOS8 after install on both iPhone and an IPad?
    I did not back up either of these devices before doing the upgrade.
    I know I should always back up before any updates, but I'm hoping the fact that I did not might be of help in my case.
    Any help would be appreciated.
    BTW: why do I want to do this? Ever since going to IOS8 my devices have become much slower to start up and also seem jerky during operation.
    I have two iPhone 4S's and one iPad

    Note that what Allan is suggesting is a way to resolve your issues. It will not downgrade your software version.

  • Modified Track Titles Revert back to Original Titles

    Purchase Track in iTunes
    Modify the title to something else
    Observed Bug:
    Modified Track Titles revert back to the original Title after time. Playing the track or requesting track info will reset back to the modified title. but eventually the title will revert again to the original title that it was in the iTunes Store.
    I do not have iTunes Match on, this only happens to Tracks purchased in iTunes.
    Anybody have any suggestions to avoid this Apple BUG?

    People in other threads have speculated that any kind of communications with Apple's servers can be at fault, including the Cloud, Genius, automatic downloads, sharing info with Apple, and even making store purchases.
    It might very well be a combination of any of these (like maybe it could happen if you make a purchase but only if you have automatic downloads on). I don't know.
    I have not experienced the problem since I turned the Cloud option off. Here are my current settings:
    Show Cloud purchases: off (turned off when I started having play count and metadata issues)
    Genius: off (never liked it, and it caused long sync times)
    Automatic downloads: off (just annoyed me; I want control of what to sync where and when)
    Share info with Apple: on (never thought about this option, so I left it alone)
    And I have made quite a few purchases from the store with these settings and no ill effects.

Maybe you are looking for