Capture a field and make that the subject line?

Great forum. Looks like I will be coming here and getting new tricks. Thanks for the support.
I am new to this so if this has been covered bear with me.
I would like to capture a field and make that value the subject line for the email when the user submits the form.
Specifically...use the Headlining Act Field as the Subject Line for the email.
Is this really obvious and I just missed it?
thanks.

dbuchanan,
You were asking about predetermining the name of the XML data file that gets generated when you submit data from Acrobat.
The name of the XML data file should always be the name of the file. Therefore, if the PDF file is named "test.pdf", the data file should end-up being "test.xml". The only catch is that if the form is opened in a browser, it means that it's been saved locally in a temporary folder
and with a temporary file name. That's when you start getting an XML data file that's named something like "TGA123DE.xml".
I know this may not necessarily solve your problem but I think it may at least explain why you're seeing different (unpredictable) XML data file names.
Stefan
Adobe Systems

Similar Messages

Using Adobe XI need to take a "field" and make it the "subject" in email

I need help I dont know how make the submit form button add a field to the subject line when it is emailed. this is the form I am working with http://www.highlandexpress.us/Forms/PRE_APPLICATION_FOR_EMPLOYMENT.pdf
When they enter the "Route Code" I would like that to be in the Subject Line... Any hekp would be greatky appreciated.
Sam

You can use either the mailDoc (http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.505.html) or submitForm (http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.537.html) JavaScript methods.
For the latter method, you'd include the subject line as part of a mailto type URI. Do a web search to see how this is done. With the mailDoc method, just use the "cSubject" parameter.

Javascript to pull a PDF field into the Subject line of email?

I've created a fillable PDF form using Pro X. I'd like to program the Submit button so that once in the email portion, the subject line would automatically pull 3 specific fields from the PDF file.
Example: After hitting "Submit"....once in the email, I'd like the Date, Vendor Name, and PO # from the PDF form to automatically pull into the Subject line.
I have to PDF the complete document and go through the Desktop Email Application on my PC.
Thank you!

Hello Everyone,
I am having the same issue as tlg814 with needing three fields to pull into the subject, and I followed the blue print of the code as well, but I am only getting one field to populate in the subject line. I am using Acrobat XI. Here is my code:
Mouse up> Run a JavaScript
var parts = getField("SR#", "Urgency", "Ship To").value
this.mailDoc({
cTo: "[email protected]",
cCc: "[email protected]",
cSubject: parts,
cMsg: "Please create a Parts Request for the items in this email. Thanks"
Any thoughts as to why it is not pulling all three fields?
Thanks

Reverse the page turn direction and make it the default

I want to apply the page turn transition to several clips. That's no problem, but each turn originates in the northwest corner and ends in the southeast corner. I want it to be opposite. I know how to do this for one transition at a time but I'd like it to be the default, so that I can apply it to all the clips and have them already moving the right direction instead of going back to each transition to change the direction. Is there a way to change the direction of the page turn transition and make that the default?

Sorry, I should have been more descriptive. I can quickly add the basic page turn to all of the clips in the sequence and about as quickly as selecting each clip and hitting Ctrl+V, I can select each transition and hit the little button that changes the direction. It's about the same amount of keystrokes, either way and I'm just looking to reduce that. Thanks!

Automatically checking the subject line (AppleScript?)

Hi All
My organisation has implemented protective marking of email - basically all email must have a standard classification phrase embedded in the subject line. I have writtten an applescript which will automatically create a clean new message window in Mail with the appropriate configuration - that's easy. I want to roll this out to other Mac users also, and I want to make it robust. The problem is that if users forget to mark their email it won't get out past the server.
What I want to do is to automatically check all outgoing email (preferably sent in the usual way by hitting the Send button), to make sure the subject line is appropriately marked. If it isn't then the mail should be held up and the user should be prompted to add the required marking. I had hoped to be able to do this via a rule - check the subject line for the marking - and if absent run an applescript to add it.
Is this possible? My attempts have failed - everything seems to be geared towards incomeing or received email. Are there better ways? I have no experience developing plugins for mail - are there any templates out there?
Thanks in advance
Dave Mitchell

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also http://kb.mozillazine.org/Find_bar_opens_when_typing_in_textbox

Can I script an email button to put one of the form fields in the subject line and to name the form?

This is a fillable form on a website. We want people to complete the form, then click on the email button to send it to us. Prefer to have the "name" field populate in the "subject line" of the email, and also rename the form that same field name. Is that possible?

In the sample I used the below syntax to send an email..
event.target.submitForm({cURL:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF"});
The highlighted ones are local variables which will hold the value from the form fields.
If you want to get the Subject from Name field in the form, use some thing like this.
     var strSubject = name.rawValue;
     //and then pass the value to the code.
     event.target.submitForm({cURL:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF"});
Hope this helps..
Thanks
Srini

I recently created a new folder, dragged some items into it, and found that the entire contents of my desktop appeared to be in there as well. This happens every time I make a new folder. Any suggestions?

I recently created a new folder on my MacBook, dragged some items into it, and found that the entire contents of my desktop appeared to be in the folder as well. This happens every time I make a new folder. Any suggestions?

Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.

Just got my new iPad Air and noticed that the screen calibration is off. For example if I select the circle to place something there I have to select outside of the circle to make it happen. I did not have this issue on my previous iPad.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If no fix, Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

How to move iTunes Library/Media Files to external firewire Hard Drive and make it the master library, and then point iTunes to that when adding new content??

Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
To Operate iTunes from the External Drive...
Start iTunes with the Option key held down and guide it to the new location of the library.
Be Sure the drive is Formatted Mac OS Extended (journaled)
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

When I make my computer to sleep after a few hour it will light up again and say that The mac have a problem need to be shut down

I don't know why wne I put my mac to sleep it will light up it self after a few hour and say that the mac have a problem needs to be shut down, does anyone know why?

Sounds like it's experiencing a kernel panic. Post the latest report. See
About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

I've lost the use of predictive text in the subject line of gmail and I want to get it back

I used to be able to hit a few characters in the subject line of a gmail compose window and it would bring up past subject lines with the same characters. That doesn't work anymore. How do I get it back? I've tried changing the settings under preferences/privacy/history but it doesn't seem to make any difference. Any ideas? Thanks

See:
*Firefox > Preferences > Privacy > Firefox will: "Use custom settings for history": "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
This Gmail web page may be using autocomplete=off to prevent Firefox from storing form data.
You can remove autocomplete=off with a bookmarklet to make Firefox store form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
Note that Firefox won't auto-fill saved form data automatically when autocomplete=off is used, so you need to double-click the empty name field to get a drop-down list.

Passing form field name to the subject line of the task assign email

Hello Everyone,
I am trying to create a process that need to pass one of the field data from a form to the task email assign but could not make it work right as expected. I think I miss something but could not figure it out myself. If any one has done this before, please share your knowledge.
Thanks in advance,
Han Dao

Hi Jasmin,
I thought it simple thing to do by passing the xPath to the subject line but for some reasons, it does not work instead it show the whole xpath on the subject line. Here is my xpath:
{$/process_data/FormData/object/data/xdp/datasets/data/FSFIELDS_/Form1936/EmpInfoSub/UserM gr$}
where Form1936 is the pageName, EmpInfoSub is sub-form, and UserMgr is field name on the form.
Thanks,
Han Dao

Is there a way to add the information from a custom field into the subject line of notification email

I have a field in my form that I would like to add to the Subject line in the email notification form. Is there a way to pull that out of the form and add it?

Try with t.code AUT10 -Audit trail using which you can see the change histories.
Regards,

How do I install a language XPI globally and make it the default language?

I am using Firefox on unices and various Linux distributions (the less common ones). Installing Firefox is easy, but it is always in English. I get most of my interfaces (gnome, libreoffice, gimp, etc) in my preferred translation simply by setting the proper locale (export LANG=xy_XY.UTF-8) before starting Xorg. I found and downloaded my preferred language pack for firefox, which comes in an XPI archive. Opening that XPI file in Firefox (via an URL of file:///path/to/file/langpack.xpi) works smoothly, the translation gets installed under the user's own profile and it shows up in the add-ons (under the new category: Languages). Unfortunately, I still see no way in Firefox preferences to set this added translation as the default. Firefox still starts with the English interface. On SeaMonkey, there is a combobox on the Appearance panel that allows me to select the language of the interface from the list of installed/available languages. I cannot find such option on the panels of Firefox. So far, I had to install a language-changer add-on to be able to set the interface to my native locale. Even though my users never need to switch to any other locales.
Q1., Once a language xpi is installed, how do I set the interface to use that language?
Q2., How do I install the language xpi and make it the system-wide default, so that all my users see Firefox starting with the native (non-English) interface?
I found a handful of description for Q2, but they appear to be outdated and do not work. These include the -install-global-extension argument to Firefox, placing the xpi file as it was downloaded into the "extensions" folder, placing the xpi file renamed to the extension ID into the "extensions" folder, unzipping the contents of the xpi into a subfolder of the "extensions" folder named as the extension ID. Please note, these attempts might have failed because I placed the extension NOT where it was supposed to go. The instructions refer to the global extension folder as <installation folder>/extensions, but on my system no such folder exists. Firefox seems to get installed into /usr/local/lib/firefox and there is no "extensions" subfolder there in. However, there is a "browser/extensions" subfolder, but placing my XPI there did not trigger any effect. Also, I manually created the "extensions" subfolder in /usr/local/lib/firefox and moved the xpi there (on various names, unzipped and in a whole) without the expected result.
Any suggestion is very much appreciated!
My goal is to install the firefox package, then run something from the command line resulting the non-English translation in the downloaded XPI becoming the system-wide default for all users. A step forward would be to know for certain where that "extensions" folder must be on my specific OS. How do I query that?

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

UCCX What field and table of the UCCX database contains the max time to answer a call?

What field and table of the UCCX database contains the max time to answer a call?
Also when performing an aggregate function on CSQ queries do I group on target id? Is that the unique identifier?

Hi Christina,
Please find the information of the UCCX DB schema in the following table:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85dbschema.pdf
Regards,
Arundeep

Capture a field and make that the subject line?

Similar Messages

Maybe you are looking for