Capture BP and Item Master "VCR" navigation event

If a BP or Item Master Data record appears that contains notes in the "Details" tab, I'd like a message box to come up alerting the user to this fact.  Seems like it would be fairly simple.  I can do this when a BP or Item is brought up from a orange arrow without a problem.  However, the tricky part seems to be trapping the navigation button event when the user navigates through the master data using the "VCR" buttons.  I've not yet found the correct event to trap to do this reliably AFTER the master data loads from the VCR button press.  Any ideas or advice would be appreciated.
Thanks,
Greg

You are asking a question that has been posted at least twice in the past weeks
Please see this thread:
Catch an event for a system forms change of data
+ this one:
Data load event
HTH,
Frank

Similar Messages

  • What is relation between atc1 (item master attachment) and item master.

    hi.
    i am having some problem.
    ie.
    what is the relation between atc1 and  item master header....
    i want to execute the below query.... and i want to get the line no from the sql.
    if u ask what is the difficulty..
    one.jpg may be two items can upload ...the same image. i can not filter based on the file name
    select Line from  atc1  where  FileName ='one.jpg'
    is it possible like
    select Line from  atc1  where  FileName ='one.jpg' and itemcode='one'

    Hi,
    Try this:
    SELECT T1.[Line] FROM OITM T0 left join ATC1 T1 on  T1.[AbsEntry]  =  T0.[AtcEntry] WHERE T1.[FileName]  =[%0]
    It will displace name of the file which is attached to item master.
    Thanks & Regards,
    Nagarajan

  • BP and Item master data Approval stage  (doubt)

    Hi experts ,
    One of client asking .. they Need approval stage for BP and Item master data... how can i do.. is it possible in SAP B1 or not.. If its possible mean can you give me some idea. about the possible.. please help  me out this issue.
    Thanking you
    Dineshkumar kannan,

    hi.
    As per your Analysis if Any Expert says it is not possible.
    U can Achieve.. by using Sdk.
    plz have a look on below image...
    Each item master or Bp master is having  3 Radio buttons
    Active
    inactive
    Advance....
    Through the Sdk code i have  done the Requirement ....long back ago...
    Step1: If any body open the item master  it should be in  In Active mode...So, they are adding the new item master...
    Note: The item will be adding but , We can  not post the Transactions  like Sales order others....
    once it is active only We can do the transactions..
    Step2: i am using Sdk ... a Small message will go to the Approver....
    Step3:I create a customization Form once Approver Approve the Document ..... i make it item master in Active to active......
    If it is not usefull. just ignore it....
    Bp master is also same process................
    This type of Requirement

  • Inactive Items in Organizations and item master

    I suppose user cannot select for those Inactive items in POs. But actually it does.
    Does anyone know why?
    Thanks,
    Amy

    Hi Amy,
    I have tested this at my end after removing org assignment for some items.. When I tried to create PO, it didn't allow me to include these Items in the PO line as these items are no more belongs to this organization..so this proves Items are not getting picked for the PO which is not assigned..
    What do you mean by *"So, even I marked the item is inactive.... it still let user enter in POs."..* Have you done the org assignment detachment properly.. could you please elaborate littel bit.. Let me know how you inactivate the Items...
    Say your master org is : MAS and Item is : XYZ and this Item is assigned to Org : ABC..
    what you have to do is : Go to master Item option --> Select Organization as "ABC" --> Query on Item (XYZ) --> Click on Org Assignment Tab. --> now your Org ABC will apear at the top of the list --> Uncheck the Assigned check box.. Now create a new PO.. try to include Item # XYZ.. Let me know if you are able to create a PO with this item "XYZ" in it's line..
    Please confirm if you have already done this exercise and still getting error?
    Regards,
    S.P DASH

  • Item Master Data Form events not triggered

    I don't know why but when I close de form
    I would expect the code to get in the ItemEvent
    so I can work on the et_FORM_CLOSE but it never get in the ItemEvent
    when I click on the X for the form
    Any ideas ?  I'm starting to panic !

    God.  Sorry.  My mistake...

  • Attachment from item master to SO

    The Client (on 11.5.10) needs to carry forward the attachments from item master to the SO.
    None of the document categories were carried to SO.
    I created a new document category in OM and enabled it for Forms 'Sales Orders' and 'Item master'. But this category was not available in item master form.
    Can anyone throw some light on this?
    Thanks

    Hello,
    In 11.5.10.2 our developer added new organization to items:) I think in R12 you do not have any standard function.
    Regards,
    Luko
    Ps. Look also http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/item-assignment-to-orgs-in-inventory-r12-4688011
    Edited by: Luko on 2012-08-20 22:17

  • Item Master Data - Min Inventory

    In  Item Master Data, the inventory tab, is it possible to change  (Through DTW) the Min.Inventory field? If so which DTW template do I use?

    Hi......
    Yes it is possible.....
    For this you have to use WarehouseInfo template with which you have to run WarehouseInfo_OITW  and Item Master data template both simultaneously.......
    The template is there in the same folder of Item Master Data......
    Reagrds,
    Rahul

  • Serial attribute and org attribute problems with item master

    IF i want to unassign an item from an org, how would i do tht
    The check is not updateable in the organization assignment tab
    Secondly:
    When i try to make an existing item serial controlled, i go to inventory tab on item master and when i change the serial control attribute GENERATION then "For some items it says APP-INV-05525: Either On Hand quantity or pending transactions exist for item, cannot change this value"
    But for same item if i choose GENERATION sales order issue than it works fine.
    Thirdly:
    How would i Use generated serial numbers..how to assign them or use them for issuing and recieving

    Regarding the 1st part of your query: Unassigning item from an Org
    You cannot unassign an item that way (by unchecking the Assigned checkbox).
    You have 2 options:
    1) Delete the item from the respective Org if it is not yet transacted in that org.
    Navigation : Items-> Delete Items
    Once selecetd this will open deletion Group screen, please enter a new group name and description and for type select Item from LOV and then in details Tab enter your item that you want to be taken out.
    Save the transaction and then click on Delete group button at the bottom of the screen --> this will raise a concurrent request.
    If it is already transacted in the respective org from where you want to delete it then system will not allow to delete the item for audit trail purpose.
    2) You can make the item 'Inactive' to prevent transactions or ordering (purchasing/sales) you can uncheck the appropriate attributes on that item in the org (assuming your attributes controls allow it at org level rather than master level).
    Regarding Serial number generation options a) At Receipt and b) At Sales Order Issue:
    a) At Receipt >> Create and assign serial numbers when you receive the item. As you move the material within inventory and until you issue it out you have to use the serial number for those transactions.
    b) At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. For this option serial numbers are required at ship confirm.
    Now as per the definitions given above, if there on-hand already exists in your organization(s) then you cannot set the serial generation control "At Receipt". Because in that case all existing on-hands should have serial number assigned which is not the case. On-hand should be zero to set the control "At Receipt". Hence system will prevent you from setting it to "At Receipt" when on-hamd exists. Also in your post you mentioned that you tried to change the control in Item Master, that means serial control generation attribute is set at Master level for you. In this case it will consider on-hands for that item in all the child orgs.
    On the other side if you are setting serial control generation "At Sales Order Issue" then seral number is not required for existing on-hands because it will be created and assigned during ship confirm. So system will not prevent even if on-hand exists.
    Considering the options available in the system your third question (How would i Use generated serial numbers..how to assign them or use them for issuing and recieving) not very clear. The "generated serial numbers" part is creating little confusion in mind as to what you are actually looking for.
    As explained above, if control is set "At Receipt" >> Create and assign serial numbers when you receive the item. Use the Lot/ Serial button on the right hand corner of the material transaction screen and enter the serial number.
    If control is At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. In the Shipping Transaction screen use Tools >> Serial Numbers option before ship confirm and enter the serial number.
    But if you have set the control as "Predefined" then, assign predefined serial numbers (by generating before hand) when you receive the item. Thereafter, for any material transaction, you must provide a serial number for each unit.
    Hope this helps.

  • Capturing navigation event

    Hi
    Im using webdynpro to create a help application/iview.
    The help should be page sensitive for example, if i have iview1 and the help iview on a page, the user chooses to navigate to page 2 of iview1 using those navigation buttons of an iview, then the help page should change/refresh to the help of iview1 page2.
    I hope this makes sense
    I want to raise an event when user chooses navigation button and send a page number parameter. So the help iview will subscribe to the event and refesh accordingly.
    How do I capture the navigation event ?
    Any help is appreciated.
    Thanx

    Hi,
    Create an event handler for the on enter event of the navigation button and pass the required parameter through the Url
    WDDeployableObjectPart deployableObjectPart=WDDeployableObject.getDeployableObjectPart(deployableObjectName,<TargetApplication name>,WDDeployableObjectPartType.APPLICATION);
             String urlToTarget=WDURLGenerator.getApplicationURL(deployableObjectPart);
    append the parameter to the urlToTarget
    Hope this would help
    Do revert for clarifications
    Regards
    Noufal

  • Capture key and mouse event

    Hi,
    What I want to do is..
    when users click on a item such as text item and press the 'Ctrl' key, a message will
    appear.
    How can I capture the event ?
    Thanks.
    Ivan

    Duplicate thread. Please see the other one at:
    <p>capture key and mouse event

  • Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

    Hello All,
    As per my requirement I have a two custom list.
    Agent Details
    Port Name
    Agent Details contains Agent code, Port Name,  email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
    Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
    Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
    when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list. 
    After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
    name list) to Agent Details custom list.
    Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
    Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
    Is anything am doing wrong then please guide me.

    Hi,
    As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
    The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
    You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
    When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
    having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
    The articles below are about how to debug in the event receiver in SharePoint 2010.
    http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
    http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
    http://sharesaint.com/?p=77
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Attendance Capturing : Training and Event Management

    Hi Experts,
    I'd like to know how to capture attendance for a Business Event.
    For an example,
    We have a Business Event (Course), say, Verbal Communication Level 1,
    Start Date : 17.04.2014            End Date  :  21.04.2014
    Each day schedule is as follows
    Start Time : 09:00:00hrs           End Time  : 15:30:00hrs
    1st session   : 9.30am to 11.00 am       break : 11.00 to 11.30am
    2nd session  : 11.30am to 1.00pm       lunch : 1.00pm to 2.00pm
    3rd session   :  2.00pm to 3.30 pm
    now my questions are,
    1. is there any standard way to capture attendance of the employees for the event?
    2. how to find get the attendance for each sessions ?  (say, present in morning session and absent in afternoon session)
    3. How to capture attendance for the vent in each day ? (say, present in first 2 days and absent in remaining days)
    i would like to know, among booked attendees, who all are present for the event and absent for the event?
    thanks in advance

    Hi Sebin,
    When you book the employees to event, automatic relation ship is created in table HRP1001, relationship type A025.
    But for your 2nd and 3rd questions, we cannot identify it is not possible in standard to capture partial attendance OR partial absence.
    OR you can create a curriculum and prepare events for each of the days and capture the day wise attendance/absence.
    Hope the above clarification clears your doubt.
    Thanks
    Srinivas Ch

  • Header and Item level in Material Master

    Can some one explain abt the header level and item level in Material master.
    Thank you
    Appreciate your Help

    Hi,
    As explained by Jurgen, There is no term like item level and header level as such in respect to material master.
    But just for convenience per say, you may call like below.
    MARA :- Header level --( Client level data)
    MARC,MARD,MBEW,MARM,MVKE :- Item level -- ( Organizational element level data).
    Hope it will help u.
    Deepak

  • Dunning proposal for item and account master record

    Dear Friends,
    In the dunning proposal list:
    Block the line item or remove the block in the current dunning proposal
    and also have another statement like Change the dunning and correspondance data of an account in the master record which is not at dunning proposal level.
    as per both the statement I have confusion of below statement:
    After the dunning proposal has been created, changes to the dunning data in items or master records are ignored in the current dunning run.
    is it true?
    Please reply.
    Thanks and regards,
    Mahendra Dev

    Dear Deepak,
    Thanks for your reply.
    My doubt is some changes are made dunning list:
    in the sap book its given a changes made at master record and items are not affected to the current dunning level
    and only you can block and unblock the items which is affected to the current dunning level.
    Is this conditions are ok or not?
    Thanks and regards,
    Mahendra Dev

  • Relation between item master org and operating Unit

    How single item master org can relate to multiple operating Unit so that items defined at Master Org level can be accessed in other operating units ?

    Hi,
    Item will be accessed in inventory organizations which you assigned the item to.
    To access items from particular Operating Unit in Purchasing module
    define Operating Unit Organization as a Inventory Organization as well.
    Then choose this Organization as a Inventory Organization in Purchasing : Setup>Organizations>Financial Options.
    In Order Management you choose an Operating Unit which items can be accessed.
    Each item assign to Item Master Organization and to Operating Unit Organization and to required Inventory Organizations.
    This works in 11i. I dont know how it is in R12.
    regards,
    Marcin

Maybe you are looking for