Inactive Items in Organizations and item master

I suppose user cannot select for those Inactive items in POs. But actually it does.
Does anyone know why?
Thanks,
Amy

Hi Amy,
I have tested this at my end after removing org assignment for some items.. When I tried to create PO, it didn't allow me to include these Items in the PO line as these items are no more belongs to this organization..so this proves Items are not getting picked for the PO which is not assigned..
What do you mean by *"So, even I marked the item is inactive.... it still let user enter in POs."..* Have you done the org assignment detachment properly.. could you please elaborate littel bit.. Let me know how you inactivate the Items...
Say your master org is : MAS and Item is : XYZ and this Item is assigned to Org : ABC..
what you have to do is : Go to master Item option --> Select Organization as "ABC" --> Query on Item (XYZ) --> Click on Org Assignment Tab. --> now your Org ABC will apear at the top of the list --> Uncheck the Assigned check box.. Now create a new PO.. try to include Item # XYZ.. Let me know if you are able to create a PO with this item "XYZ" in it's line..
Please confirm if you have already done this exercise and still getting error?
Regards,
S.P DASH

Similar Messages

  • Active Items Master via DTW?

    Dear Experts,
    Anyone know which field should I use to do the Active / Inactive item master data via DTW?
    I'm trying Valid(ValidFor) in OITM table and say "Y" or "N" and import via DTW.
    It imported succesfully but dit not update in the front end on SAP B1
    Thank you.

    Hi Mickey......
    Instead of 'Y' and 'N' use 'tYES' and 'tNO' for ValidFrom and To
    and for Inactive use tYES and tNO for Frozen
    Regards,
    Rahul

  • Serial attribute and org attribute problems with item master

    IF i want to unassign an item from an org, how would i do tht
    The check is not updateable in the organization assignment tab
    Secondly:
    When i try to make an existing item serial controlled, i go to inventory tab on item master and when i change the serial control attribute GENERATION then "For some items it says APP-INV-05525: Either On Hand quantity or pending transactions exist for item, cannot change this value"
    But for same item if i choose GENERATION sales order issue than it works fine.
    Thirdly:
    How would i Use generated serial numbers..how to assign them or use them for issuing and recieving

    Regarding the 1st part of your query: Unassigning item from an Org
    You cannot unassign an item that way (by unchecking the Assigned checkbox).
    You have 2 options:
    1) Delete the item from the respective Org if it is not yet transacted in that org.
    Navigation : Items-> Delete Items
    Once selecetd this will open deletion Group screen, please enter a new group name and description and for type select Item from LOV and then in details Tab enter your item that you want to be taken out.
    Save the transaction and then click on Delete group button at the bottom of the screen --> this will raise a concurrent request.
    If it is already transacted in the respective org from where you want to delete it then system will not allow to delete the item for audit trail purpose.
    2) You can make the item 'Inactive' to prevent transactions or ordering (purchasing/sales) you can uncheck the appropriate attributes on that item in the org (assuming your attributes controls allow it at org level rather than master level).
    Regarding Serial number generation options a) At Receipt and b) At Sales Order Issue:
    a) At Receipt >> Create and assign serial numbers when you receive the item. As you move the material within inventory and until you issue it out you have to use the serial number for those transactions.
    b) At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. For this option serial numbers are required at ship confirm.
    Now as per the definitions given above, if there on-hand already exists in your organization(s) then you cannot set the serial generation control "At Receipt". Because in that case all existing on-hands should have serial number assigned which is not the case. On-hand should be zero to set the control "At Receipt". Hence system will prevent you from setting it to "At Receipt" when on-hamd exists. Also in your post you mentioned that you tried to change the control in Item Master, that means serial control generation attribute is set at Master level for you. In this case it will consider on-hands for that item in all the child orgs.
    On the other side if you are setting serial control generation "At Sales Order Issue" then seral number is not required for existing on-hands because it will be created and assigned during ship confirm. So system will not prevent even if on-hand exists.
    Considering the options available in the system your third question (How would i Use generated serial numbers..how to assign them or use them for issuing and recieving) not very clear. The "generated serial numbers" part is creating little confusion in mind as to what you are actually looking for.
    As explained above, if control is set "At Receipt" >> Create and assign serial numbers when you receive the item. Use the Lot/ Serial button on the right hand corner of the material transaction screen and enter the serial number.
    If control is At Sales Order Issue >> Create and assign serial numbers when you issue (ship) the item against a sales order. In the Shipping Transaction screen use Tools >> Serial Numbers option before ship confirm and enter the serial number.
    But if you have set the control as "Predefined" then, assign predefined serial numbers (by generating before hand) when you receive the item. Thereafter, for any material transaction, you must provide a serial number for each unit.
    Hope this helps.

  • Updating Item Master Organization

    Dear All,
    We have two Business Group in US and in Canada. We have defined two Item Master Organization; one for US and the other for Canada. Now we want to convert it into single Item Master Organization.
    What are the implications? Is it advisable? Is there any document on the impact on the existing setups?
    Regards
    Merlin Rajesh

    I managed to import the default warehouse, using the Add and Update Items option. The items have more that one warehouse, and am trying the same this only that this time no update is going through though it says successful.
    The templates look as follows
    OITM template
    Itemcode 
    AA30990
    BB909900
    Itemwarehouse Template
    ParentKey   LineNum    WhseCode
    1                     1                 RUH
    2                      1                 RUH

  • Hide inactive items and customers

    Is there a way to hide inactive items and customers in SAP Business One 8.8.  I dont want to show inactive items when we are searching for the items if we dont know the sku.  I simply want to hide them from search.  The same applies to customers.  I know there is an archive feature in B1 8.8 but its only for transaction data to archive.  Any ideas anyone.
    Thank you.

    Hi Russel,
    In Administration - System Initialisation - General Settings - BP Tab
    De - activate DISPLAY INACTIVE BUSINESS PARTNERS IN REPORTS
    In Administration - System Initialisation - General Settings - INVENTORY Tab
    De - activate DISPLAY INACTIVE ITEMS FROM REPORTS.
    I tried this in marketing related docs.
    This will restrict inactive master entries from appearing in reports and in transaction screens.
    But you can not restrict them in masters.
    Thanks
    Malhaar

  • Relation between item master org and operating Unit

    How single item master org can relate to multiple operating Unit so that items defined at Master Org level can be accessed in other operating units ?

    Hi,
    Item will be accessed in inventory organizations which you assigned the item to.
    To access items from particular Operating Unit in Purchasing module
    define Operating Unit Organization as a Inventory Organization as well.
    Then choose this Organization as a Inventory Organization in Purchasing : Setup>Organizations>Financial Options.
    In Order Management you choose an Operating Unit which items can be accessed.
    Each item assign to Item Master Organization and to Operating Unit Organization and to required Inventory Organizations.
    This works in 11i. I dont know how it is in R12.
    regards,
    Marcin

  • While Updating Item master 1250000088 - Date ranges overlap; change the active or inactive date range

    hi.
    i am updating item master.
    just i am trying to update to inactive from active
    i allready given the date ranges
    but above error is comming..
            Dim vItem As SAPbobsCOM.Items
                        Dim RetVal As Long
                        Dim ErrCode As Long
                        Dim ErrMsg As String
                        vItem = ocompany.GetBusinessObject(BoObjectTypes.oItems)
                        'Retrieve a record by its key from the database
                        RetVal = vItem.GetByKey(Icode)
                        '' vItem.UserFields.Fields.Item("U_Status").Value = "Sold"
                        vItem.Frozen = BoYesNoEnum.tYES
                        vItem.FrozenFrom = "09/02/2014"
                        vItem.FrozenTo = "09/02/2014"

    hi.
    Thanks for your reply..
    overlapping ..means
         'Retrieve a record by its key from the database
                        RetVal = vItem.GetByKey(Icode)
                        '' vItem.UserFields.Fields.Item("U_Status").Value = "Sold"
                        vItem.Frozen = BoYesNoEnum.tYES
                        vItem.FrozenFrom = "09/02/2014"
                        vItem.FrozenTo = "09/02/2014"
        vItem.FrozenFrom = "09/02/2014"
          vItem.FrozenTo = "10/02/2014"
    i all ready tried  above  two ways.. given date same and given two  diff dates....
    but the same Error is comming..
    Any info.plz update me..

  • R12.1.1 Item Master Organization  Calender field is disabled

    HI,
    While creating Item Master Organization in R12.1.1, calender field is disabled. I have defined & built workday calender but field is disabled while creating Inventory Org. I couldn't find any reason on metalink as well.
    Can any one guide me about the issue ?
    Regards,
    Fahd

    user12240205 wrote:
    Hi all,
    I am running R12.1.3 on RHEL 5.6 64 bit.
    Recently I took a performed a clone from the PROD instance. In the PROD instance the item master form does not have any issue, but in the clone instance only the item master form seems to have this problem. When I open the Item master form it just hangs and nothing happens.
    Assistance to resolve the issue is appreciated in advance.
    Thanks &
    Regards,
    Edited by: user12240205 on Feb 20, 2013 1:17 AMPlease generate the form manually or via adadmin and check then -- How to Generate Form, Library and Menu for Oracle Applications (11i and R12) [ID 130686.1]
    Also, please make sure you have no invalid objects in the database and no errors are reported in the database log file.
    Thanks,
    Hussein

  • Multiple Item Master Organizations

    We are working on an Oracle Implementation for a large firm in South Korea.
    Our client covers many different industires and operate nationally,
    it is inevitable to use Multi-Organization structure.
    And we are also considering implementing multiple item master organizations
    under one installation of Oracle applications.
    ( Acutally We have 1 Set Of Books, 1 Legal Entity, 13 Operating Units )
    Cause there are much difference between chemical industry and Heavy Industry,
    Our Client says it just has little business impacts with 2 separate item master organizations.
    But According to Oracle documents, Oracle does recommend not to difine
    multiple item masters.
    We are not sure if there could be much functional or technical impacts with multiple item master organizations.
    Cause we have no reference site here in Korea.
    Has anyone been involved in this type of situation before?
    Are there any other points for considerations?
    We would very appreciate hearing from you ASAP.
    Thank you
    null

    I am not sure if i understood everything but I would say go with single item master. Its simple & easily to manage item attribute later on.

  • BP and Item master data Approval stage  (doubt)

    Hi experts ,
    One of client asking .. they Need approval stage for BP and Item master data... how can i do.. is it possible in SAP B1 or not.. If its possible mean can you give me some idea. about the possible.. please help  me out this issue.
    Thanking you
    Dineshkumar kannan,

    hi.
    As per your Analysis if Any Expert says it is not possible.
    U can Achieve.. by using Sdk.
    plz have a look on below image...
    Each item master or Bp master is having  3 Radio buttons
    Active
    inactive
    Advance....
    Through the Sdk code i have  done the Requirement ....long back ago...
    Step1: If any body open the item master  it should be in  In Active mode...So, they are adding the new item master...
    Note: The item will be adding but , We can  not post the Transactions  like Sales order others....
    once it is active only We can do the transactions..
    Step2: i am using Sdk ... a Small message will go to the Approver....
    Step3:I create a customization Form once Approver Approve the Document ..... i make it item master in Active to active......
    If it is not usefull. just ignore it....
    Bp master is also same process................
    This type of Requirement

  • Inactive Item report to show Item bought within a specific period and not sold within a specific period by whse and have stock

    Hi
    I'm trying to come up with query report to show Inactive Item bought within a specific period and not sold within a specific period by whse and have stock
    The report should show  Item Number, Item Name ,Item cost,Retail Price [Based on a price list], Qty in Whse, Last Purchase Date, Last sale Date etc.
    e.g item bought between 2011-2013 and have not been sold with the same date range or the last 12 months.
    Regards
    Brian Ndunda.

    Hi,
    Try this query:
    SELECT T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[AvgPrice], T0.[LastPurPrc], T0.[LstSalDate] FROM OITM T0  left JOIN INV1 T1 ON T0.ItemCode = T1.ItemCode left JOIN OINV T2 ON T1.DocEntry = T2.DocEntry WHERE T1.[Quantity] is null and  T0.[OnHand] >0 GROUP BY T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[AvgPrice], T0.[LastPurPrc], T0.[LstSalDate]
    Thanks & Regards,
    Nagarajan

  • Stocktaking and inactive items

    Hello Everyone,
    Like a lot of businesses we have been having problems with the change of treatment of inactive items in SAP B1 8.8, we are now preparing to take stock and have found that whilst the stock audit report will show inactive items readily, the stock take screen under initial quantities/stocktaking/stock posting does not show the inactive items.
    We do have stock of some inactive items and therefore need to count them, but the absence of the items from the above function makes the job difficult. has anyone else come across this issue and found a workable solution???
    Thnaks in advance for your help
    Dave Jackson

    Thnaks Gordon, just what I needed, I was picking up the incorrect field to describe inactive, have modded the query to get to individual wharehouses so it ends up like this
    SELECT T0.[ItemCode], T0.[ItemName], T0.[frozenFor], T1.[WhsCode], T1.[OnHand] FROM OITM T0  INNER JOIN OITW T1 ON T0.ItemCode = T1.ItemCode WHERE T0.[frozenFor] = 'Y' AND  T1.[OnHand] > 0 ORDER BY T1.[WhsCode]
    Suprised that SAP basic functionality doesnt allow inactive items to be counted though!  that should focus attention on obsolete stock!!!
    Thanks again for your help
    Best Regards
    Dave Jackson

  • Item Master showing wrong Tax % in Purch. and Sales Tab

    Hi
    In Item Master Data Purchasing and Sales Tab the wrong Tax % value is shown. It shows the value valid from 1.1.2011 and not the value that is currently valid. In all other areas it does show and use the correct, at current date valid value.
    2007A SP01 PL09
    Known bug?
    Thanks
    Franz

    Hi Gordon,
    You might be right that it is 'a bit early' for the 2011 rates. However, because
    - we got the official information about the raise next year
    - B1 offers the possibility to enter the new values with a validity date in the future
    - I am not 100% sure if it influences any 2011 predated document posted if the correct value for 2011 is not already present in the system
    - and in the end just to prevent me from forgetting to change it at the year end - what's done is done
    Franz

  • Mismatch in InStock Quantity in Item Master at Item level and W/H Level

    Hi,
          All,
                I get some mismatch in 'InStock Quantity' at Item level and W/H Level, in Item Master.
               for Some Item and mismatch increases day by day.
    ex:          At one total item Instock Qty : 100
                   but in W/H 1 InStock Qty :   -80
                   in W/H2  InStock Qty :   -2
    Please give me reason for such a problem and also, solution to overcome this problem
    Thanks
    Vivek Kumar Gaurav

    Dear Gordon,
    Thanks for replying me.Yes,there are multiple add-ons are running on client. There is no work done with SAP inventory. So you can consider that it's a problem of vanilla SAP B1.
    Warm Regards
    Vivek Kumar Gaurav

  • What is relation between atc1 (item master attachment) and item master.

    hi.
    i am having some problem.
    ie.
    what is the relation between atc1 and  item master header....
    i want to execute the below query.... and i want to get the line no from the sql.
    if u ask what is the difficulty..
    one.jpg may be two items can upload ...the same image. i can not filter based on the file name
    select Line from  atc1  where  FileName ='one.jpg'
    is it possible like
    select Line from  atc1  where  FileName ='one.jpg' and itemcode='one'

    Hi,
    Try this:
    SELECT T1.[Line] FROM OITM T0 left join ATC1 T1 on  T1.[AbsEntry]  =  T0.[AtcEntry] WHERE T1.[FileName]  =[%0]
    It will displace name of the file which is attached to item master.
    Thanks & Regards,
    Nagarajan

Maybe you are looking for