Capture process not enqueuing any message

DB Version : 10.2.0.4
I am trying to setup a simple capture process. The streams administrator (say APPS) is the queue owner as well as base table owner. I perform the following steps :
1. Setup the queue using dbms_streams_adm.set_up_queue
2. Add a table rule using dbms_streams_adm.add_table_rules
3. Start the capture process using dbms_capture_adm.start_capture ( or from EM console)
I am not instantiating the base table explicitly, as it is documented in the admin guide that 'dbms_streams_adm.add_table_rules' will implicitly do the same.
Once I insert / update the base table, v$streams_capture shows TOTAL_PREFILTER_KEPT getting incremented properly.
Still I don't see any message getting enqueued in the streams queue.
Appreciate some help to diagnose the issue.

Hello
Do you have either a propagation defined on the same capture queue (streams queue) or an apply process on the capture queue? From your explanation, it looks like you have only a streams queue and a captrue process with certain capture rules. Let me know.
Thanks,
Rijesh

Similar Messages

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

TS5185 Hi After I have report a junk message I coudl not get Imessge from other iphone. and could not send any message in blue color but green which need to pay for.

Hi After I have report a junk message to 7726, I coudl not get Imessge from other iphones. and could not send any message in blue color but green which need to pay for. Does Apple blocked my imessage ? I have checked the setting. imessage is on.
Thanks,
J

Make sure that your date and time settings and time zone are accurate (Settings - General - Date and Time). Reset your phone to 'Set Automatically' and then try signing in again - this worked for me. My date/time settings were not automatic (candy crush cheats!!).

I have set up iMessages on my ipad but now I'm not receiving any messages on my iPhone how can I fix this.

I have set up iMessages on my ipad in error now I'm not receiving any messages on my iphone, can anyone advise how to fix this or just undo everything I have done, don't necessarily need messages on my ipad

Hi there Shwalks,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
-Griff W.

JMS consumer is not receiving any messages. am i missing something ?

Hi bellow is the consumer code, my consumer is not receiving any messages even though there are messages in the queue. I have tried to debug the code. but the consumer is not calling the onMessage() method even though there are messages in the queue. Please guide me on the same. if i am missing something.
package org.icrm.cons;
import javax.jms.Connection;
import javax.jms.Destination;
import javax.jms.ExceptionListener;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageConsumer;
import javax.jms.MessageListener;
import javax.jms.Session;
import javax.jms.TextMessage;
import org.apache.activemq.ActiveMQConnectionFactory;
public class JConsumer implements ExceptionListener,MessageListener{
     public static void main(String[] args){
          JConsumer consumer = new JConsumer();
          System.out.println("here 1");
          consumer.consumeMessage("MyQueue");
     public void consumeMessage(String queueName){
          try{
               System.out.println("here 2");
               ActiveMQConnectionFactory connectionFactory = new ActiveMQConnectionFactory("tcp://localhost:61616");
               Connection connection = connectionFactory.createConnection();
               connection.start();
               connection.setExceptionListener(this);
               Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
               Destination destination = session.createQueue(queueName);
               MessageConsumer consumer = session.createConsumer(destination);
               //ASync
               consumer.setMessageListener(this);
               //Sync
               /*Message message = consumer.receive(1000);
               TextMessage textMessage = (TextMessage)message;
               String text = textMessage.getText();
               System.out.println("Received : " + text);
               consumer.close();
               session.close();
               connection.close();
          }catch(Exception e){
               System.out.println("Caught: " + e);
               e.printStackTrace();
     public void onException(JMSException arg0) {
          System.out.println("JMS Exception occured. Shutting down client.");
     public void onMessage(Message message) {
          try{
               TextMessage textMessage = (TextMessage)message;
               String text = textMessage.getText();
               System.out.println("Received: " + text);
          }catch(JMSException e){
               e.printStackTrace();
}

Hey,
I commented the following line of code. and i got all the messages.
//consumer.close();
//session.close();
//connection.close();but then when should i close the consumer, session and connection object ???

My brother gave me his iphone and i activated it with my phone number but i can not receive any message and i notice that on iMessage stills appears his phone number, what do i have to do?

my brother gave me his iphone and i activated it with my phone number but i can not receive any message and i notice that on iMessage stills appears his phone number, what do i have to do?

Launch iTunes on your computer, plug the phone in & on the "Summary Pane", select "Restore". This will restore the phone to factory settings with all of your son's stuff gone. You can now use it as an iPod touch. To do this REQUIRES the deactivated sim card be still installed in the phone.

Mail will not receive any messages

As of 9:30 Thursday morning, Mail will not receive any messages. I can still compose and send but incoming messages just sit on Google's server (where I've been reading and replying). Nothing was changed, Connection Doctor shows everything to be fine, I've checked and reentered passwords, quit Mail, restarted the computer, etc.
Suggestions?

I tried that again, including another shut-down, and based on another link, changingthe"check for new mail" preference from "automatically" to "every 5 minutes."
No change.

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

Hello Jaded1234,
The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT5312 algokar Dec 26, 2013 2:11 AM Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety I can not buy any program that I forgot to ask him answer safety Please help and send me a re-liquefaction a

Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety
I can not buy any program that I forgot to ask him answer safety
Please help and send me a re-liquefaction answer to the same email

1) Apple ID: All about Apple ID security questions
If necessary
2) See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
3) Or Email Here > Apple Support iTunes Store Contact

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS.

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?

iOS: Troubleshooting Messages

Sender File Adapter - No error, but not generating any message

I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.

I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames     RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue     'B'
Buildings.fieldSeparator     ','
Buildings.endSeparator     'nl'
Buildings.keyFieldInStructure     ignore
Additions.fieldNames     RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue     'A'
Additions.fieldSeparator     ','
Additions.endSeparator     'nl'
Additions.keyFieldInStructure     ignore
Floors.fieldNames     RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue     'F'
Floors.fieldSeparator     ','
Floors.endSeparator     'nl'
Floors.keyFieldInStrucutre     ignore
Rooms.fieldNames     RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue     'R'
Rooms.fieldSeparator     ','
Rooms.endSeparator     'nl'
Rooms.keyFieldInStructure     ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
   <Buildings>
      <PLTXT/>
      <STORT/>
      <STREET/>
      <POST_CODE1/>
      <CITY1/>
      <REGION/>
      <PARNR/>
      <X_COORD/>
      <Y_COORD/>
      <ASSIGN_SQ_FT/>
      <BLDG_NUM/>
      <CAMPUS/>
      <GR_SQ_FT/>
      <NET_SQ_FT/>
   </Buildings>
   <Additions>
      <ASSIGN_SQ_FT/>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <BLDG_USE/>
      <BLDG_NUMBER/>
   </Additions>
   <Floors>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <FLOOR/>
      <ASSIGNABLE_SQUARE_FOOT/>
      <BLDG_NUMBER/>
   </Floors>
   <Rooms>
      <SHTXT/>
      <MSGRP/>
      <ADDITION/>
      <ASSIGNED_DEPT/>
      <BLDG_ABBV/>
      <FLOOR/>
      <CAMPUS/>
      <AREA/>
      <RCD_CODE/>
      <DEPT_CODE/>
      <BUILDING_NUMBER/>
      <ROOM_COMMON_KEY/>
   </Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda

I can not see any messages that are coming

hello friends,
I have a problem where some users from an external domain can not send messages to my domain.
I get this external domain for some users but not others in the same domain.
those users who can not receive the external domain, can send to other domains, such as: (yahoo, google, etc.) I did tests and received, but not in my.
I use a scan mail for exchange, but not found where to see all messages that enter my scan mail. I just got to see if it is looking for the real time, but that and bad.
guide the logs I do not find any option that shows all messages that are coming. I want to make sure that the messages are coming in my scan mail for exchange.
I did some analysis, but I need help to do some basic tests:
. [email protected] and [email protected] are from the same domain.
Sending email User ([email protected]) - I get the two domains
. The email sent by the User ([email protected]), I found in my exchange 2010 tracking log.
. I received this same email on (yahoo.com.br).
. I noticed that the header of the message and the address output different from the message sent by User ([email protected])
Sending email User ([email protected]) - Not get in my domain
. Not found in the tracking log of my exchange 2010 and not given any locks on my scan mail for exchange.
. I received this same email on (yahoo.com.br)
. I noticed that the header of the message and the address output different from the message sent by User ([email protected])
General observation:
. When doing a test with nslookup seeking MX, MX identified that this header in the message User ([email protected]) and different from the User ([email protected])
I'm a little confused if the problem is in some blockage in my environment or can be problem in the ([email protected]) environment.
Thank you.

Resolved.
As was reported, the client received an IP and not others. (Identified in the header)
We monitor the firewall and that confirmation that the IPs closed connection on port 25, this means that they were trying to send.
Looking at screen real-time Trend Scan Mail noted that at the time the User would send message apareceiam a message "User Category Spam", but gave not to identify what was the specific email. The vision is very bad.
Then questioned the sender if he was getting some feedback and he said yes. While viewing the message is written that there is a blockage (IP Email Rreputation) that sends the email.
The SPFs of making an appointment, identify the block of IP that the client could receive was registered in the SPF and what not reached, was not.
I believe so Trend included these IPs as bad.
Added the IPs whitelisted email reputation and the messages were received by the customer.
Thank you.

Not getting any messages at console (Developer studio)

hi all,
I am doing a web application project.
Here i created a java bean class for the database connections etc..
I created WAR file and EAR files also. Deploy to J2EE Engine is successful.
I created jsp file as front end to insert the values into the Database. When i'm running the web page i didn't get any messages (System.out.println()) in the console.
How can i start the server in the Developer studio?
Please guide the steps....
Thanks,
Raghu

Hi,
As far as i know when u deploy your ear in the J2EE engine it will be available.. You dont have to start any server.
IF u have a JNDI name you can direct lookup the bean.
And about system.out.println we cant see the ouput in webpage ! Try response.getWriter().println()......
Elobarate on ur scenario .. and it will be easier to help !
Regards
Suraj

"I do not get any message or option to add exception" - Using Self signed cert -Images does not load

Wr are have two web servers one for app and another for loading images. Both are behind Kemp Load balancer and are using self signed certs from the load balancer. The images does not load when using Firefox 3.x. I load with IE and Firefox 2.x. With firefox 3.x it does not give a message to "add exception". I only get one certificate message to add exception for the app server. I do not get the certificate message or pop up for the imaging server with Firefox 3.x.
== This happened ==
Every time Firefox opened
== Always ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You have a lot of information in packed in the "More system details..." (in the right-hand column), where it looks like you found a solution. If not take a look at "Problematic Extensions" the AVG Free installation of their "'''AVG Free Search'''" can cause such problems. Directions to fix that are specific and involve reinstalling AVG Free without the Link Scanner component.
* http://kb.mozillazine.org/Problematic_extensions

Capture process not enqueuing any message

Similar Messages

Maybe you are looking for