Carry-forward CALC-070 ERROR

Hi,
We've set up a simple account transformation that transfers an INC account from F_CLO to an equity account account on F_INJ (a FLOW member in the AcctDetail dimension). Source and target use the same "INPUT" datasource but the target applies to YTD.
At run-time, it fails to transform the first period but start accumulating properly on following periods. In the log file, it throws this error message: Warning: CALC-070 No DATA Extract From FACT Table - 20090300
As a matter of fact, the prior period on the target account and target flow is empty but I don't understand why it would cause a problem.
Has anyone got an idea?
Thanks,
Regis

I made some progress on this issue. There cannot be two members with the same combination of YEAR and MONTHNUM property value even if they have two different KEY. This combination has to be unique.
However, the CARRY FORWARD rule still does not work. This time, it seems to complete successfully but it does not produce any result. The format of my time members has changed to PLAN.2009, PLAN.2010...
For these members, I set the YEAR property to PLAN and the PERIOD property to 2009, 2010... The MONTHNUM goes incremental from 1 to 40 (I have 40 years in my long-term plan).
Now, does the YEAR property needs to be numeric? Does the TIME member KEY has to be YYYY.xxx where YYYY is a 4-digit number?
Thanks,
Regis

Similar Messages

Error in Asset Value carry forward to next year

As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

Hi Erika,
I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
600981 0 Secretariat Table 2014 Error in dep. calculation

Carry forward AR spl and asset error

when I use year end balance carry forward for AP/AR, it pops the message saying company code still in year 2010, do we need to do vendor/customer open item clearing and finish the dec month closing, then we can use f07 to carry forward and no such warning message will apear? which report I should compare so I can make sure F07 the figure is correct and is really carried forward to new year? can we run( actual run )for f07 several times? is there any accounting doc posted?
in asset closing, we have run depreciation run for dec, can we run ajrw before ajab?
in special ledger carry forward, we found the error: KR23 820000 record not carried forward since no account defined-->check account, but we don't have fs00 record for 820000, this is not gl account, how can we check? how to make sure balance sheet account and retained earning account carried forward is correct figure, for example, I chose company code KR23 in the selction screen of gvtr, but the retained earning account shows both company code KR01 and KR25, thus my reained earning account transaction currency for these company codes is 4mil, why system shows so many company code, I want only KR23, how to do? Thanks

Hi,
Generally, you will want to call these business rules from a BPC Data Manager package. Similar to how you call a script logic package. In fact, you'll have to use the DM package to call a basic script that then executes the program. See the instructions in the online help:
[http://help.sap.com/saphelp_bpc75_nw/helpdata/en/bpc_nw_index.htm]
Here is the code they describe to run the CarryForward Rule:
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %GROUPS_SET%
TID_RA = %TIME_SET%
*ENDRUN_PROGRAM

BPC10NW: Error while running Balance Carry Forward

Hi,
I am trying to run 'Balance Carry Forward' (COPYOPENING) to copy opening balances from 2010.DEC to 2011.JAN.
The 'Opening Balances' package fails with "RUN_LOGIC:Cannot find document/directory" error.
The Copyopening.lgf is available and is been validated successfully.
We have refered to the below link but still the opening balances is failing with the same error.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70657540-106d-2e10-8393-d702056767a4?QuickLink=index&overridelayout=true
Any suggestions?
thanks in advance,
M.S

Hi,
I have found similar issues with business rules in v10.
Can you just try to include this in Default logic and see if you can get it to run from a sent record. I know that this is not necessarily the nicest approach as you would normally like to run the package from DM, but I could not get certain things to run from DM.
If (like me) you can get it to run via Default, you could then trigger this by sending a dummy record to a dummy account.
I know it's not ideal but until this is fixed (I think it may be a bug) then this could be a solution.
Let me know if this helps at all.
Tom.

FS10N Balance carry forward error

Hi,
I have few documents in 2007 and carry forawarded to 2008 and 2008 i have posted documents and i have carry forwarded but in 2009 only 2008 balance is showing.
EX: 2007----100(carry forwarded to 2008)
2008 balance opening balance is 100
I have posted few documents of 50
Carry forwaded to 2009 then balance should be 100+50=150 but system is showing only Rs.50
I am using ECC.6
Thanks and Regards

Hi
Did you do all these 3 steps
Balance CarryForward for General Ledger -->F.16/FAGLGVTR
Balance CarryForward for Vendors/Customers -->F.07
Copy Number Ranges for next fiscal year -->OBH2
Re-Do the Balance Carry Forward for which you are not getting. some times it wont carry forward in a single shot.
No issue if do it again.
Regards
Venkat

Carry forward of Open Items - FMJ2

Hi,
We are using BCS in EHP 7.0. i am trying to carry forward the open items with FMJ2 and Availability control is "Update without check". When i execute the transaction, system is carryforwarding to next year without any errors.
How ever, if i see the availability report FMAVCR01 for 2015-
Budget for 2015 is 0 - Consumable budget - 0, Consumed Budget is 20000$ and available amount is -20000$.
Where if i add the budget for 2015 of 50000$, then consumable budget - 50000, Consumed is 20000 and available amount is 30000$. it is consuming from current year.
Please help me on this.
Regards
Sam

Hi Eli,
Thanks for your reply
When i carry forward the open item, and runs the FMAVCR01 report, it is deducting last year open items budget from current year. As i stated above, Consumable amount is 0 and consumed amount is 20000$ and available amount is -20000$.
Is System should carry forward the consumed budget along with consumable budget?
Regards
Sam

Closing balance of january to be carried forward as February opening bal.

Hi Gurus,
I am looking for the script logic which helps me to carry the closing balance of a month to the next month as opening balance. Please can anyone help me with the code.
Thanks in advance.
Regards,
KumarMG
Edited by: KumarMG on Jun 7, 2011 4:40 PM

Hi Kumar,
From consolidation perspective, carry forward is a period-end activity and has to be done every period. CATEGORY dimension has a property called OPENING_PERIOD which can be used to define the source period from where you want to copy the data. The target period is defined as variable in the data manager package. So you have to run it for each period.
Normally, we bring closing balances from ECC (or any other source system) and also load supplemental movements types (F_120 etc). Then we use default logic (as shown below) to check the data integrity and post differences in error flow.
[ACCDETAILDIM].[#F_ERR] =IIF([ACCOUNTDIM].CURRENTMEMBER.PROPERTIES("DIMLIST1")="L1_E", [ACCDETAILDIM].[F_999] - [ACCDETAILDIM].[F_100] - [ACCDETAILDIM].[F_120] + [ACCDETAILDIM].[F_140],0)
Say if you are loading periodic data from source systems (ECC) and want to calculate the closing balance from openings/movements then you can create a script logic for the same. You can also use transformation rules and post the closing balances.

Balance carry forward to new financial year.

Hai SAP Guru
I run the transaction f.07 for transfer of balance pertaining to vendor and customer to new fianncial year.
Though the run took place with out any errors and all the balance were carry forwarded, it had various line items pertaing to individual vendor and customer, and when i cross verified with the individual balance it was not tallying but the consolidated balance of customer and vendor were correct, when i ran the GL balance transfer.
a) I want to know whether the above procedure is correct, is there any other method of cross
verifiying the correct of transfer entires.
b) When the transfers are done , a consolidated amount is trnasferd to vendor/customer account
or a single line item as it is now displayed in my system.
Thanks.

Hi,
There is nothing to do with balance carryforwarding.
After the end of FY you need to run F.07 and F.16 once, since this is a technical step from the business point of view.
After doing the above function also, you can still post transactions to old FY, and those will be automatically adjusted to the opening balance for the new FY.
Or else you can re run the aboce programs again, hence it does not make any diff in any point of view.
For checking the balances you need to use FD10N and FK10N by using respective recon accounts in the selection screen.
Thanks,
Srinu

EC-CS Balance Carry Forward

Hi Experts,
At the time of balance carryforward my current year retained earning needs to be transferred to retained earnings (Prior year). I have specified FS items in Items to be carryforward config, despite that it's not getting transfred. It doesn't gives me any error message but under "Default Subitem" it only shows PY item as my source FS item which is CY retained earning. If I do specify other FS items (assets etc) it works perfectly well. I don't know why it's happening with retained earning item only??
Any suggestion would be appreciated.
cheers
Sam

I know - that's why I'm asking you if you've set it up properly!
If your "retained earnings - current year account" is not carrying forward to another ("retained earning prior year") account - have you defined it properly in the Items to be Carried Forward ?
If you are intending to carryforward to a specific subitem, have you defined the caryforward subitems properly (NB this is within the subitem definition)?
If it isn't carrying forward as you expect, what is happening to the value in yuor retained earnings account, is it carrying forward to itself?
If not, you need to ensure that you have defined the item type properly (eg income, expense, balance sheet, statistical account...) for each account.
Finally, please check that you haven't defined the account to specifically NOT be carried forward.

Balance Carry Forward in Accrual Engene: "No matching data found in fiscal"

Hi,
I have executed ACACCARRYFORWARD (Balance Carry Forward in Accrual Engine) to 2011 and I have success message on screen of Overview of Balances Carried Forward.
But, when I execute Start Periodic Accrual Run (manual accruals) for 31 January 2011 I have error message "Processing not posible on 31.12.2011 - Fiscal Year 2011 not carried forward", and then I execute again ACACCARRYFORWARD to 2011 but now, I have massege "No matching data found in fiscal year before 2011".
For more information when I execute ACACCARRYFORWARD for the first, I haven't maintain no range for 2011 (ACEPS_RUNID-Define Number Ranges for Periodic Posting Runs; ACAC_ACEPS_APPLLOG-Define Number Ranges for Application Log ; ACEPS_ACEDOCNR-Define Number Ranges for Accrual Engine Documents; ACEPS_AWREF-Define Number Ranges for Assigning ACC Doc. to ACE Doc.)
Please help me !!
Thank you verry much.
Suryadi.

We are operating two company codes. Company A and B. We followed the same steps in executing the Balance carry forward for both the company codes but in Company A we cannot display the actual line items.
Edited by: Ellicec on Jan 26, 2011 8:39 AM

GL Balance Carry Forward Not Done

Dear Experts,
I am using SAP 4.7e
I had forwarded the GL Balances (F.16) for 2009 to 2010
when i saw FS10n for 2010 balance for Asset Recon account (PLANT AND MACHINERY)
12 period Balance amount is carry forward . I think ***.Balance should be forwared to 2010
my client could not close 2008 for asset (AJAB). System error :Close fiscal year 2008 for company code XXXX first
So please guide me .
What i do ?
Regards,
Jemes

Hi,
Can you check what is the closed Asset fiscal year for your company code in T.code - OAAQ.
Thanks & Best Regards,
M.Ganesan

Balance carry forward not happening for new entity

Hello Gurus,
We added mid 2009 a new entity to be consolidated.
The balance carry forward assigns the last year results to retained earnings, this is the same accross all entities.
When executing the task in the monitor, there is no error message but it does no work, results end-up on a difference elimination item.
For all other entities, it works fine.
I wonder if there is a configuration that I overlooked.
Many thanks for you inpput.
Alex-

So you are saying that for all other consolidation units, the Balance CarryForward (BCF) was successful?
but for only one unit is was not successful?
- I suggest to you that one of the following has occurred;
1. there is no data against the balance sheet items for that unit (go to totals records to confirm YTD balance last year for all Balance Sheet items for that cons unit)
2. there is only data against a specific item that has been set to carryforward to the "elimination" item that you mentioned (check the BCF items to be carried forward confgiuration)
3. there is only data against Balance Sheet items that have been configured NOT to be carried forward (check the BCF config)
4. you have configured some items incorrectly as Item Type; Income Statement or Statistical instead of Balance Sheet.
5. You have missed the consolidation unit from the hierarchy for p1, 2010 (please also check the combinations if it is a matrix consolidation unit) so the BCF is not running for that unit at all
Checking these 5 should get you closer to the answer

Deletion of parked invoices after carry forward of open items in FM

Hi,
We have Funds management activated in our client.The MIRO invoices are parked for the year 2008.We follow calendar year.Open item are carried forward to 2009 without posting/deleting the parked invoices.We are now unable to delete the parked invoices. We get the following error message while trying to delete the invoice:
Posting in fis. yr 2008 is not possible; in FM open doc. 5000005928 in fis. yr 2009
Message no. FMCF102
Diagnosis
It is not possible to change document 5000005928 in fiscal year 2008 because the document was updated as open commitment in fiscal year 2009 in Funds Management.
System Response
The posting is not carried out.
Procedure
To change the document
If the fiscal year 2008 is later than 2009:
Carry document 5000005928 forward to fiscal year 2008 using program Closing Operations: Carryforward of Open Items (RFFMCCF1).
If fiscal year 2008 is earlier than 2009 and document 5000005928 was carried forward already:
Reset the commitment carryforward using program Closing Operations: Reset Carryforward of Open Items (RFFMCCFR)
Then you can make the change to document 5000005928.
I tried to undo Carry forward using FMJ3,but I get a message "There are no items to be reversed"
Please guide me,
Thanks in advance
Latha

Hi,
Please, check note 1285456. The CF of parked invoices was apparently performed with discrepancies in the tables.
Regards,
Eli

FMJ2 - Carry forward with budget Line

Hello,
I have done a carry forward FMJ2 and everything works perfectly. However the client let me know that they also want the budget line associated to the commitments to be carry forwarded.
When I try that, the system gives me error FMAVC005.
In "Define basic stting for carry forward" I have "Carry forward with document chain".
In "Enter default settings" I have flaged "Carry forward budget for commitement allowed" and also the other 2 (Commitemnt and residual).
Any idea about this topic.
Please let me know.
Regards,

Hello,
Avalability control is activated and I ma working with BCS Budget.
In 2013 I have introduce my budget FMBB (Budget line). Then I have created a reserve agaisnt this budget line.
When I try to do the carry forward the budget line is not carry forward and so the reserve in 2014 is trying to consume a budget line that do not exist.
Please find a document with the images of the customizng and the 4th one with the result of the budget in 2014 but without the availability control (I get a negative ammount).
Regards,
Daniel

Budget carry forward problem

Guys,
When i try to carry forward my budget for internal orders in KOCO i am getting this error. I am trying to carry forward budget of 2008. We are testing are year end steps. How does the system determine which fiscal year is closed? i have closed the fiscal year in asset accounting and was able to open year 2009.
Why can i not carry forward budget to 2009.
Update run only possible for closed financial years
Message no. BP595
Diagnosis
You have tried to close the current fiscal year or a future fiscal year in a production run.
Since the process cannot be reversed, you may only close a fiscal year which has elapsed.
System Response
Processing automatically takes place in test mode.
Procedure
Start the transaction again for a fiscal year which has elapsed.

Some closing steps you can not do in the Future.
In some case to test the fical year closing you have to change the CPU date from the server.
An other option is to test it from 2007 to 2008
There are some work arrouds you can found then on SAP notes, I think you can't to close the fiscal year for asset accounting to in the future
Paul

Carry-forward CALC-070 ERROR

Similar Messages

Maybe you are looking for