CAT2 personnel number does not exist

Hello everyone. I have an employee that was created using personnel number 111. Something had to change on the associates HR master data after about 2 months so personnel number 111 was deleted, and the associate was then created under personnel number 222. During the two months that the associate was using personnel number 111 they entered time in CAT2 to a wbs element. When the personnel number 111 was deleted, the associate then went in and reenterd the same time in CAT2 using personnel number 222. This caused the wbs element to be charged twice. When I try to go into CAT2 now I am getting the error message that "personnel number 111 does not exist". I need to remove the time entered using personnel number 111, but cannot. We cannot just have the associate delete the entries made in CAT2 using personnel number 222 because metrics are tracked for employees based on time entered. Any experience with this issue? How do I delete the time that was entered in CAT2 by personnel number 111. Any help is greatly appreciated.
Thanks,
Jordan

Hi
"it is not possible to choose what personnel number gets assigned when you create a new employee"
from this statement, i understand that the internal number range is used to create employee numbers. Ask your HR analysts if there is a free slot for "external number range". You can use this external number range on temporary basis and try to create employee with number 111.
Regards

Similar Messages

My cursor frequently stops working. It still moves but nothing happens when I click with it. Also, when I go for support Apple tells me my serial number does not exist but I am sure I am entering the correct one.

My arrow cursor changes unexpectedly to the "tall I" cursor and then I can't open links.
My two delete buttons only work one letter/number at a time.
When I go for Apple support it says my serial number does not exist? But I know it is correct!

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

My Library Column does not exist when I execute a Caml Query

Hello,
I am new to SharePoint programming. I am trying to understand how I can access the documents in a Library Folder and obtain the field values for each document in the container. With this in mind I have pieced together the following code from
various posts that demonstrate how to to this:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint.Client;
namespace ConsoleListItemsInFolder
class Program
static void Main(string[] args)
ClientContext ctx = new ClientContext("http://mwp_lenovo");
List DocumentsList = ctx.Web.Lists.GetByTitle("Claims Documents");
CamlQuery camlQuery = new CamlQuery();
camlQuery = new CamlQuery();
camlQuery.ViewXml = "<View Scope=\"RecursiveAll\"> " +
"<Query>" +
"<Where>" +
"<Eq>" +
"<FieldRef Name=\"FileDirRef\" />" +
"<Value Type=\"Text\">/Claims Documents/11111111 Stuart Little</Value>"
+
"</Eq>" +
"</Where>" +
"</Query>" +
"</View>";
ListItemCollection listItems = DocumentsList.GetItems(camlQuery);
ctx.Load(
listItems,
items => items
.Include(
item => item["Title"],
item => item["Claim Number"],
item => item["Policy Number"],
item => item["Policyholder Name"],
item => item["Document Type"]));
ctx.ExecuteQuery();
foreach (ListItem listItem in listItems)
Console.WriteLine("Title: {0}", listItem["Title"]);
Console.WriteLine("Claim NUmber: {0}", listItem["Claim Number"]);
Console.ReadLine();
When I execute the code with the debugger ctx.ExecuteQuery(); throws the following error:
Microsoft.SharePoint.Client.ServerException was unhandled
Message=Column 'Claim Number' does not exist. It may have been deleted by another user. /Claims Documents
Source=Microsoft.SharePoint.Client.Runtime
ServerErrorCode=-2147024809
ServerErrorTypeName=System.ArgumentException
ServerStackTrace=""
StackTrace:
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
at ConsoleListItemsInFolder.Program.Main(String[] args) in c:\Users\matt.paisley\Documents\Visual Studio 2012\Projects\ConsoleListItemsInFolder\ConsoleListItemsInFolder\Program.cs:line 37
at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
InnerException:
These columns do exist in the Library as verified in Library Settings. Many of the Library column names contain two words divided by a space. Is this causing the problem? Does SharePoint maintain a less offensive representation of the field
name internally? If so, how can I get it?
If I run this code with only the title, then it runs fine.
I Thank All in advance for any assistance that you can provided.
Regards,
Matt Paisley
Matthew Paisley

Hello
In addition to Geetanjali Arora answer, change also those other columns
item => item["Claim Number"],
item => item["Policy Number"],
item => item["Policyholder Name"],
item => item["Document Type"]
If you don't know the internal name of a column,
go to the list containing the columns
go to "list settings"
scoll down to the "columns" section
click on one of your columns et take a look a the url of the new page, you should found parameter "&Field=" => What is after is your field internal name (the one you should use in your CAML query)
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Equipment no does not exist

Hi,
When I am assigning serial numbers to the production order in CO02 at header level. System is throwing an error message sayiing that the Equipment number does not exist.
Please give me a solution to this issue.
Thanks and Regards,
Varun Siddharth

Dear DSK,
Thanks for your response. I have checked the process instructed by you. But the same error repeats again.
*Equipment 10725431 does not exist.*
*Message no. IS801*
Is there any other option?
Thanks and Regards,
Varun Siddharth

Getting Message - Customer PINXX does not exist

Hi experts,
While creating a P.O. I am getting a message that "CUSTOMER PINXX DOES NOT EXIST (PLEASE CHANGE ENTRY IN PLANT INXX)
*Following is the message details:-
Customer PINXX does not exist (please change entry in plant INXX)
Message no. 06849
Diagnosis
The shipping data for stock transfer processing has not been correctly maintained in Customizing.
Either no customer number has been maintained for the receiving plant, or the specified customer number does not exist for the sales organization data that has been maintained in Customizing.
Procedure
Check your input.
If the problem cannot be resolved in this way, contact your system administrator.
The latter can make the missing settings using the Implementation Guide (IMG): Set up stock transport order*
Please provide Pointers

Please check if the customer code has been extended for the proper
Sales Org.
Distr. Channe
Division
Company Code
Also refer the FAQ note 498143 and check the customising accordingly
Please check you customizing in IMG for Purchasing:
Purchase Order
Set up Stock Transport Order
Define Shipping Data for Plants
Select details for plant
Here, the customer number related to plant is defined.
Probably this customer number is no longer a valid customer number.
You need to check whether the customer number has become inactivated
in SD or FI.
If so, you need to define another valid customer number for the plant

ORA-13605: The specified task or object Get does not exist for the current

Dear all,
11.1.0.6 on solaris 10
SQL>
SQL> DECLARE
2 taskname varchar2(100);
3 taskdesc varchar2(128);
4 task_id number;
5 object_id number;
6 timeLimit varchar2(25);
7 numDaysToRetain varchar2(25);
8 objectName varchar2(100);
9 objectType varchar2(100);
10 BEGIN
11 taskname := 'SEGMENTADV_8980096';
12 taskdesc :='Get';
13 numDaysToRetain :='30';
14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
18 END;
19 /
DECLARE
ERROR at line 1:
ORA-13605: The specified task or object Get does not exist for the current
user.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
ORA-06512: at "SYS.DBMS_ADVISOR", line 56
ORA-06512: at line 14
Am running the above as sys user ..
Any idea ?
Kai

Hi,
This link may help:
ORA-13605: The specified task or object ADDM:<task number> does not exist.
Thanks and Regards,
Rajesh K.

Personnel Does not Exists CAT

Hi, I created a Personnel in HR Mini Master. in CAT2 transaction , I can search & result shows new Personnel Created , but as soon as I click edit Time Sheet, It say Personnel does not exist. I tried creating Info 315 in PA30, but it said cost center does not exist in CSKS table, which infact exists. please help. Thanks and regards, Niketan Maral

Adding to It Function Module CATS_GET_BASIC_INFOTYPES is giving error for the personnel number
Thanks and regards

Number range does not exist error message while releasing billing document

Hi,
We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval does not exist FBN1". Note : System does not specify which number range is missing...
There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
Regards,
Sakthy

Hi,
I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
I hope this will make sense.
Panneer

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Number range for object MDTB does not exist - Message no. 61501

Hi All ,
I have done the necessary configurations in PP say
Order Type
Order Type Dependent Parameters
Scheduling parameters for planned & production order
Confirmation parameters
Availabilty check etc
and iam able to create planned & production order and confirma the production order.
I want to configure for MRP: -
Settings done are
Have activeted planning file entry for all plants.
When i run MRP system throws a error <b>Number range for object MDTB does not exist - Message no.61501 </b>
Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
I just tried plant parameters,standard 0001 is not available for copying.
Suggest me how to proceed to set MRP.
Shankar

Hi shankar
it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
in SE16N check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
hope this helps
regards
SK

Phone number appearing in Favorites list but does not exist in Contacts

I have an iPhone 4S, running iOS 5.1.1 (9B206).
About two weeks ago (not really sure when I noticed) a phone number appeared at the bottom of my Favorites list. The number is for a person that I deleted from Contacts some months ago. The number is not in the Contact list anywhere, the contact does not exist. I've tried recreating the contact (and Favorites then shows the name) and then deleting the contact, and its still there in the Favorites list.
There is a facetime icon next to the number. If I turn off Facetime, the number disappears.
Any ideas welcome.

Go under your phone icon, then under the favorites tab. Look in the top left hand corner of the screen and there should be an edit button. Tap it, and then tap the red delete/minus icon to delete it from your favorites list.

Error :number range interval 01 does not exist

Hi,
i created a number range object Z_REPORTID in SNRO for autogenerated ids and later used the function module NUMBER_GET_NEXT. After execution i got the following error.
For object Z_REPORTID, number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing
Please help me to trace this out.
Thanks,
Anila

Hi
AFter creating the number range interval in SNRO you must TRANSPORT the interval. In the first screen --> Interval --> Transport.
Did you perform that step?
If you did that it should work well. Itried the same now and it is working fine.

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Profitability segment number 02209 does not exist in operating concern ESAA

Hello Experts,
Please help us on one issue which we are facing here that
"Profitability segment number 02209 does not exist in operating concern ESAA"
please could you please let us know why are facing this issue and where to check if this Profitability segment number.
Thanks and Regards,
Mangal Modi

HI,
This can occur if you have deleted data from table CE41001 and have
already assigned data to profitability segments in this operating
concern.
Check the OSS note: 93051, hope it may help you..
Thanks

Object RV_BELEG number range interval 01 does not exist

Hi Gurus,
I need suggestion or solution to solve my problem when creating sales order(standard order) from VA01 transaction.
Error Descriptio and Message:
For object RV_BELEG , number range interval 01 does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:
Reporducing the error:
Screen flow: VA01 Intial Screen Input
                      Order Type: SD 'Subs.Dlv.Free of Ch'.
                      Sales Org :
                      Enter.
                      Next Screen: Click on "Complete Dlv" push butoon.
                      It will take to next screen go with "SAVE" option.
                      Iam getting an incomplete Delivery want to edit.
                      Go with "EDIT" and give Input in "ORDER REASON" drill down option.
                      select any one option and go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                      Provide Input In "Customer Group" drill down option select any one option from it.
                      Again go with arrow symbol in the menu "EDIT NEXT DATA" or F5.
                      Here iam getting an status "Document is complete".
                      Click on "SAVE" option.
Here status message error showing: "For object RV_BELEG , number range interval 01 does not exist".
This is the issue occuring with me while creating Sale Order from VA01.
help me if any one have know solution or suggestion to solve error.
Tnks & Rgds
Bhaskar

This because of the missing SD Document Number Range.
You can check this in tcode SNRO for object RV_BELEG.
Ask your SD Consultant to Change the number range assignment or create that missing 01 number range number object.
This will solve your problem,
Regards
Karthik D

CAT2 personnel number does not exist

Similar Messages

Maybe you are looking for