Catalog type in QM

Hi All,
In qs41 transaction i have created some code groups, and inside it i have defined codes. Now, i want to delete some code and code group. When i am trying to delete it, it is showing error.
In SPRO Setting for catalog type i can click the check box "deactivate", then it will allow me to delete.
My query is by checking the box "deactivate", what can be it's affect later. Should i go ahead and check the box deactivate, as this is the requirement from user.
Please help me.
Regards,
SATYAJIT
Edited by: Satyajit Kumar on May 16, 2008 7:31 PM

Issue is resolved.

Similar Messages

  • Crm 7.0 webchannel ,define catalog type query

    Hi all,
    m facing a problem in webchannel (crm),if any of you can guide me in this regard, i would greatly appriciate it..the problem is :
    While performing "define catalog type" ,under the "Folder Template" tab when m trying to assign my newly created AREA & ITEM m getting the message "no values selected, maintain entries" & when i click yes m getting a window "choose customizing project". There is a button stating "continue w/o specifying project", if i click on that its taking me to "Define template for forlder" under basic functions in spro crm.I have already maintained folder for area & item which are saved then why are they not showing when m pressing f4.
    regards,
    Nitin

    I am assuming that your requirement is to create a new catalog type
    Normally, the CRM system comes with few standard catalog types - such as, AUTO and MANU. These catalog types usually have the respective "Areas" and "Items" predefined. For example, the Catalog type MANU has MANU-AREA and MANU-ITEM. The message here is, the standard system does come with several values predefined for these configuration tasks.
    Now, coming to your requirement, if you don't see any standard values in your configuration steps, then there is some issue you should look into.
    In your case, since no standard values are available for the "For Areas" and "For Items" - which actually should be in CRMD_KW_TEMPL table, I think you have to check if everything has been done correctly as far as the upgrade transport or installation transport goes.
    What is the version of CRM are you in? Though the following note is old, it is worth investigating.
    [Note 751751 - Content Management: Error TK295 in Customizing|https://service.sap.com/sap/support/notes/751751]

  • User defined Catalog type u0093Su0094  - Valuation code field missing

    Hi Quality Experts,
    I have created a user defined catalog type in customization coping the catalog type 3.
    This is required for authorization purposes.
    Transaction Code : QS51.
    For system defined catalog type 3, in QS51 all fields are visible.
    Hence selection set can be created.
    For user defined catalog type S which is a copy of 3,
    for the same transaction code QS51 many field are hidden.
    Hence selection set can not be created.
    15 Columns are existing.
    S.No     System defined Catalog Type "3".     User defined Catalog Type "S".     Remarks
    1     Code Grouop     Code Grouop     OK
    2     Code                      Code                      OK
    3     Short Text for Code     Short Text for Code     OK
    4     Long Text for Code     Long Text for Code     OK
    5     Valuation Code     MISSING                     THIS FIELD IS MISSING
    6     Quality Score     MISSING                     THIS FIELD IS MISSING
    7     Posting Propasal UD     MISSING                     THIS FIELD IS MISSING
    8     Long Term Char.     MISSING                     THIS FIELD IS MISSING
    9     Stock Screen
                    Backgr.                    MISSING                     THIS FIELD IS MISSING
    10     Follow up action     MISSING                      THIS FIELD IS MISSING
    11     Short Text      MISSING                     THIS FIELD IS MISSING
    12     Changed By     Changed By     OK
    13     Changed On     Changed On     OK
    14     Created By     Created By     OK
    15     Created On     Created On     OK
    ===========================================================
    Total  7 fields are missing.
    SAP Version : SAP ECC 6.0
    Please guide.
    With Best Regards,
    Raghu Sharma.

    Hi
    when you have created new Catalog type by copying 3, did you check whether Selected Sets is flagged in the configuration?
    regards
    Srinivas

  • Catalog Search doesn't work for Catalog type BI EE

    Hi, All!
    Just noticed an issue with catalog search functionality in BI Publisher application: If BI Publisher uses BI EE catalog type, then search never returns results, always says nothing was found. But when i change catalog type to Filesystem and restart Publisher, then search works fine and finds needed reports.
    Tested this on 11.1.1.5 and 11.1.1.6. Can someone confirm this behavior? Or maybe this is known issue and you can advice some fix/workaround? Would be much appreciated, thanks!

    Hi,
    I can able to reproduce the same in my environment.
    Oracle BI Publisher - File system - Search option working fine.
    Oracle BI EE - catalog - Search option not working always showing "did not match any documents".
    Rgds
    Aarvi.

  • Improper update of Catalog Type from Notification into QMUR table

    Hello SAP'ians,
    I have created several Service Notifications, while doing so I have also filled up the related code grps/codes into "Causer Code" catalog available in the "Item" tab.
    technically, this entries can be viewed in the table QMUR. I see all the entries like code grps/codes available except for the Catalog type in the filed VUKAT. No matter whatever the entries I make/edit in the causer code catalog, the catalog type[VUKAT] is not at all fillled with the entries and is always blank. Is this a bug in SAP?
    Request your kind suggestions in resolving the issue.
    Thanks
    Prasad

    Hi Maheswaran,
    Yes URKAT is infact filled with cause code catalog type. But for the causer code catalog type generally it is filled in                "VUKAT :cattype-rep party".
    BR
    Prasad

  • List of codes under various catalog types

    Hi All,
    I want an illustrative / sample list of various codes under following catalog types applicable for QM notifications which is relevent for a industry involved in trading and servicing of medical equipment.
    Can anybody please provide me the same ?
    1) Coding
    2) Defect location
    3) Defects
    4) Causes
    5) Tasks
    6) Activities
    Regards,
    MHP

    1) Coding -
    If you are measuring color of the material then you can create "COLOR" as code group and under this code gp you can create diff code as required, example;
    001 - white
    002 - black
    003 - red
    004 - yellow etc...Same way you can create diff code grp and code combination.
    2) Defect location -
    If you are inspecting material at diff location then you can create diff code for each location
    001 - QC lab
    002 - QA lab
    003 - Electrical lab...etc..
    3) Defects -
    Here for each defect you Crete one new code..
    001 - Color is not good
    002 - Cert missing
    003 - Out of spec...etc..
    To create all different codes for diff activity first you need understand you business process and try to map those business process steps with creating code and map to process.
    hope this helps to understand.

  • Downloading the data of catalog types / catalog / codes

    Hi Friends,
    We have the catalog types, code groups, codes, selected sets defined in SAP.
    How can I download them directly from SAP.
    Kindly help.
    Regards,
    Naren

    You can load these directly from the tables using SE16.
    QPAC                           Inspection catalog codes for selected sets
    QPAM                           Inspection catalog selected sets         
    QPCD                           Inspection catalog codes                 
    QPCT                           Code texts                               
    QPGR                           Inspection catalog code groups           
    QPGT                           Code group texts                         
    Craig

  • KATALOGART - Catalog type help

    Hi,
    I need to find the catalog type (KATALOGART.)
    I will be using function module QPK1_GP_CODE_SELECTION & as such, will need the catalog type.
    For example, catalog type is used in QM01.
    Thanks,
    John

    Hi,
    You can find KATALOGART in table QPCD.
    <b>Reward if helpful.</b>

  • Build fieldcatalog from a catalog type lvc_t_fcat

    Hi experts,
    i'm getting a short dump when i want to create a field catalog using function module REUSE_ALV_FIELDCATALOG_MERGE.
    Short dump says:
    Runtime Error          CALL_FUNCTION_CONFLICT_TAB_TYP
    Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE  
    and i think it came from type of fieldcatalog.
    Internal table:
    BEGIN OF it_za91 OCCURS 0,
            kschl LIKE konp-kschl,
            kunnr LIKE kna1-kunnr,
            mfrnr LIKE mara-mfrnr,
            kbetr LIKE konp-kbetr,
            konwa LIKE konp-konwa,
            datab LIKE a908-datab,
            datbi LIKE a908-datbi,
            field_style TYPE lvc_t_styl,
          END OF it_za91.
    Fieldcatalog
    DATA: fieldcatalog TYPE lvc_t_fcat
    What should i do?
    Thank you.

    Thank you my friends.
    I'm getting this strange behavior when i call FM LVC_FIELDCATALOG_MERGE. If i declare a local structure when i call FM LVC_FIELDCATALOG_MERGE fieldcatalog would be empty. If I'm creating a structure from SE11 , it's OK.
    So, everytime when i want to create am LVC fieldcatalog i must create a structure from SE11 ???
    DATA: BEGIN OF st_za91,
            kschl LIKE konp-kschl,
            kunnr LIKE kna1-kunnr,
            mfrnr LIKE mara-mfrnr,
            name1 LIKE lfa1-name1,
            brsch LIKE lfa1-brsch,
            kbetr LIKE konp-kbetr,
            konwa LIKE konp-konwa,
            datab LIKE a908-datab,
            datbi LIKE a908-datbi,
            END OF st_za91.
    DATA: it_za91 LIKE STANDARD TABLE OF st_za91 WITH HEADER LINE,
               fieldcatalog TYPE lvc_t_fcat.
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
    *   I_BUFFER_ACTIVE              =
       i_structure_name             = 'ST_ZA91'
         i_client_never_display       = 'X'
    *   I_BYPASSING_BUFFER           =
    *      i_internal_tabname           = 'IT_ZA91'
       CHANGING
         ct_fieldcat                  = fieldcatalog
    *  EXCEPTIONS
    *    inconsistent_interface       = 1
    *    program_error                = 2
    *    OTHERS                       = 3
    In this way fieldcatalog would be empty.
    There is a way to create a fieldcatalog using LVC_FIELDCATALOG_MERGE but without creating a structure via SE11?

  • Doing catalog work on laptop when away from desktop computer

    I just recently moved from doing all my work on a single machine (laptop, MacBook Pro) connected to a 5 bay external hard drive to using 2 machines, a desktop (Mac Pro) hooked up to the 5 bay eternal HD and the laptop.
    My set up - Desktop running Snow Leopard, Laptop Leopard. They are networked with an Airport Extreme. I log into the Desktop from the laptop rather than use File Sharing.
    I'm still using Lightroom 2.7, single license, so I wouldn't have LR running on both machines at the same time. Catalog is stored on the Desktops internal HD - User/Pictures/Lightroom/Catalog. I use a single catalog, 30,000+ images. Catalog is approx 550MB.
    I've got it pretty well figured out how to export a catalog from the laptop to the desktop after returning with images from a shoot, but, while I work a lot at my desk on the desktop, I want to be able to work on my catalog with my laptop. Hoping for some advise on how to do that. I'm looking to only do catalog type work on the laptop - evaluating, rating, deleting, keywording etc. I will not be doing any Developing or working on the actual image files, which are stored on the external 5 bay HD connected to the Desktop.
    2 situations:
    1. When I'm in another part of my space with my laptop and connected to my desktop (wireless), I go to the catalog located on the Desktop, I get a msg that Lightroom catalogs cannot be opened on network volumes. So how do I simply work on my LR catalog, using the laptop, when I'm networked to the Desktop?
    2. When I'm away from my space, traveling etc, so not networked to the desktop. In this case I assume I would want to Export a copy of the catalog onto the laptop or a small portable HD and work on it while I'm away. But when I return, should I then Export the whole catalog back to the Desktop, or is there a Synchronize type function where LR updates the changes only? Is there a safe way to do this that minimizes the risk of introducing errors if the whole master catalog is moved back and forth? Should I break up my single large catalog in to smaller bite sized chunks that would be easier to move back and forth?
    Thanks for any advise. If this is easier to accomplish on LR 3, that would be a good reason to upgrade. 

    My master catalogs are heftier than I want to clone all over the place so I use the following method.
    In LR, put the files you want to work on in a subfolder of your Primary catalog
    Export Folder As Catalog with previews, but without including the DNG's
    At your new location/machine work on that catalog.
    Here's the part that's no fun, (obviously have a backup of your catalog before you do this)
    In your primary catalog REMOVE that folder from your catalog. (this will remove all references within your catalog, but leave the RAW files alone where they were)
    You then FILE-->IMPORT FROM ANOTHER CATALOG, and import your subfolder export back into your Primary catalog.
    It'll bring all of your changes and previews back into your Primary catalog but with unlinked RAW files.
    Click on the question mark in the corner of the thumbnail that's telling you it doesn't know where the source files are and LOCATE the original file again in your file structure, with the FIND NEARBY MISSING PHOTOS box checked.
    Overly complicated for what it is, but it gets the job done.

  • Object '485V83KBEXPI7' (ROUT) of type 'Routine' is not avble in D Version

    Hi,
    when i am installing BI Content Activation for InfoObject catalog 0MMPUR_CHA0,
    InfoObject catalog remains Inactive and showing below error.
    Object '485V83KBEXPI7VUNBAQ0D9UCR' (ROUT) of type 'Routine' is not available in version 'D'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name '485V83KBEXPI7VUNBAQ0D9UCR' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.

    If you see so, then Goto BI Content in RSA1. Select Object Types>>> Infooject Catalog>> type ur Object name there. and transfer selections. When this object will come on ur rght panel, u can see it is in 3.5 version. Now click install now. this will get it in your rsa1 Modeling section. Then go there and say 'Migrate'.
    Hope this helps.

  • Be sure to update the App Catalog ASAP!

    Many of us received this email from the webOS team:
    Mandatory webOS system update
    A certificate used on webOS devices expires on July 23, 2013. For the system to be able to use cloud services such as Backup/Restore and App Catalog the certificate needs to be updated.
    Beginning June 6th an automatic update to the Application Catalog has replaced the certificate. That means that if your device is running webOS “2.1” or greater you can have the certificate installed automatically by activating your device and accepting the update.
    If your device is running a webOS version older than “2.1”, or you want to manually install, go to the HP App Catalog on your device and select the app called “App Catalog Update”, download and install it on your system.
    To install the new certificate, download and install this application.
    After July 23rd, 2013, it will be necessary to take special steps to install this update. Details will be available on the HP support site (http://email.hpwebosnewsletters.com/cgi-bin13/DM/t​/hBkJC0bxLrj0PTn04Cpr0Ge)
    We are sorry for any inconvenience this may cause.
    webOS Team
    I had no problems at all with the update, though others are reporting installation failures.  Here's what I did:
    1. Open the App Catalog, search for the word "update".
    2. "App Catalog Update" was the first hit in the list that appeard.  I clicked the "Free" button, and it downloaded.
    3. Once downloaded, the "Launch" button appeared.  I clicked it, and the app ran and opened a new window that announced, "The update installed successfully".
    If you run into problems, try restarting the TouchPad and try again.  I've installed this on two TouchPads, and a Pre3 without any problems!  
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    I seem to remember that I had to do the procedure twice on one of my devices.  For easy reference, here it is.  Before starting the procedure, I would also restart your device.
    Installing the Updates after July 23rd
    For users of ALL webOS devices:
    Open the “Date & Time” app on your device.
    Set “Network Time” to Off.
    Set the date to July 1, 2013.
    Open the App Catalog
    Type “App Catalog Update” in the search filed, and select “Enter” on the keyboard.
    Tap the “App Catalog Update” app to display the details page.
    Tap “Download for Free” to download and install the app.
    Return to the “Date & Time” app.
    Set the date back to the current date.
    Set “Network Time” to On.
    Note: Once the appropriate update is installed, the certificate is renewed even if the user later decides to reset the device (partial or full erase), or deletes any of the updates discussed here.
    It is possible for users to install both an App Catalog update, and the “App Catalog Update” standalone app. Although not necessary and redundant, there is no harm in doing this.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • How to attach PDF file to product catalog in e-Commerce ERP

    Hello Experts,
    We are implementing SAP E-Commerce for ERP (ECC 6.0 version)
    On the product catalog, I need to attach a PDF file to the products.
    I have created a document as
    Document Type: DMO
    In this I have created 1 original as:
    Applic: PDF
    Original:  "abc.pdf" (the PDF file has been uploaded to the correct Web Server folder)
    This document has been assigned to the product as u2018Documentsu2019 in the product catalog.
    I replicated the catalog on TREX. However now I am not sure how to acess this document on the e-Commerce Products JSP.
    When I access the product index on TREX, I do  not see any attribute that contains this document Type containing the PDF.
    (The standard LIM / SIM documents are getting attached correctly to the products, I see the relevant images on the JSP)
    I am not sure if I am missing something in attaching  the document?. Please let me know what else is required to be done for this?
    Thanks in Advance.
    Regards,
    Roopali

    Hey Roopali,
    Following is the procedure to Attach a multimedia object .
    Hope you are following this especially point number 16.
    1.     Access the activity using one of the following navigation options:
    Transaction code     COMM_PCAT_ADM
    SAP CRM menu     Master Data à Product Catalog à Maintain Product Catalog
    You will have Material Master rather than Product catalog as it is ECC version.
    2.     In the Product Catalog field, enter PRODUCT CATALOG
    3.     In the Catalog Type field, enter Manual and automatic assignment.
    4.     Choose Change.
    5.     Expand Header Data by choosing the Expand data area Button labeled Header Data
    6.     Check that the status is Inactive.
    A yellow light bulb indicates that the status is Active. To set the status to Inactive, click the light bulb and a gray light bulb appears.
    To add new products to your product catalog, you must first deactivate the status on all levels.
    7.     In the Object Name screen area, select your product catalog.
    8.     Choose Expand all.
    9.     Double-click the catalog area to which you want to manually assign your objects.
    10.     Check that all products are set to inactive.
    11.     In the Item list, double-click the product.
    12.     The selected product is shown below in the screen area Item Details.
    13.     Choose the Item Documents tab.
    The tab page Product Documents provides information about which objects are already assigned to a product in the product master. This means that these objects cannot be changed in the product catalog. They can only be changed in the product master.
    14.     Choose the folder YCRM_IMAGE  or YCRM_THUMB and choose Import document. Browse for the multimedia object that you want to assign to the product. 
    15.     Select the object (picture) and choose Save.
    16.     Choose the tab page Properties to set this multimedia object as language-independent, set the field Language-Independent(Prod) = Yes.
    This field controls the publication of documents in catalog variants depending on the language. This means that the document is valid for all languages in which the catalog is published.
    17.     Choose Save.
    Regards,
    Sumit

  • CODE GROUP( Catalog Profile )

    Hi Sapient,
    Is it possible to assign more no. of code group with a single catalog type like damage ( Catalog type "C" ) for a single equipment only.If it is possible then can anyone tell me how to creat the same and display it.
    Regards,
    AR.
    Edited by: Amit  Rana on Apr 14, 2009 10:26 AM

    Hi,
    You can creat multiple code groups within same catalog.But when you define catalog profile for technical object you need to  include all those code groups which you want to be available.If you want to include multiple then you need to put each code group against related catalog in catalog profile or add * for given catalog to include all code groups defined for damage catalog.
    regds,
    atul

  • User defined Catalog type3 - Valuation Code field is missing

    Hi Quality Experts,
    SAP Version : SAP ECC 6.0
    I have craeted the user defined catalog type "S" coping the system defined catalog type "3".
    In sytem defined catalog type "3", in transaction code QS51, there are 15 fields.
    Where as user defined catalog type "S", for the same transaction code QS51,
    7 fields are hidden including the "Valuation Code" field.
    Hence the selection set can not be created.
    The details are given below.
    S.No     System defined Catalog Type "3".     User defined Catalog Type "S".     Remarks
    1     Code Grouop     Code Grouop     OK
    2     Code                      Code                     OK
    3     Short Text for Code     Short Text for Code     OK
    4     Long Text for Code     Long Text for Code     OK
    5     Valuation Code     MISSING                    THIS FIELD IS MISSING
    6     Quality Score     MISSING                    THIS FIELD IS MISSING
    7     Posting Propasal UD     MISSING                     THIS FIELD IS MISSING
    8     Long Term Char.     MISSING                      THIS FIELD IS MISSING
    9     Stock Screen Backgr. MISSING        THIS FIELD IS MISSING
    10     Follow up action     MISSING                  THIS FIELD IS MISSING
    11     Short Text      MISSING                      THIS FIELD IS MISSING
    12     Changed By     Changed By       OK
    13     Changed On     Changed On      OK
    14     Created By     Created By     OK
    15     Created On     Created On     OK
    Please do the needful.
    With Best Regards,
    Raghu Sharma

    Hi Anton,
    Thanks for your prompt reply.
    Can u please guide to create a user defined catalog of type 3 ?
    While creating the selection Set, I need all fields.
    With Best Regards,
    Raghu Sharma.

Maybe you are looking for