Catalog upload problem..

Hi
We are using SRM 4.0 with CCM 1.0.
Created a CSV file for supplier catalog and uploaded the file in CCM. Data has not loaded because of following errors.
Error in CSV file: row 2 ()
Error when uploading CSV file to catalog STAPLES
My catalog file is as below.
SAP CATALOG CSV 1.0
Staples;04;True
Schema;Staples
Category;ProductID;Description;BaseUnit;OrderUnit;Price;Currency
Officesupplies;SO10001;File Folders;Each;Each;5;USD
Officesupplies;SO10002;Folders;Each;Each;2;USD
What could be the problem.
Can any one give some suggestions?
Thanks
Jagdish

Hi Bodo
I tried with your CSV file and getting below error in Log
Green Indicator Uploading catalog WALMART
Green Indicator Name of file that was uploaded: C:\Project\UNSPSC\Walmart_DE.csv
Green Indicator 06.02.2006 09:12:40: Starting CSV import for catalog WALMART
Red Indicator Format of CSV file is incorrect; expected format was CATALOG,DATATYPE,COMPONENT,CHARACTERISTIC,SCHEMA,CATEGORY,CONTENT
Red Indicator Error when uploading CSV file (Version 2.0) to catalog WALMART.
We are having CCM 1.0 with SP SAPK-10007INCCM.
SRM_SERVER 500 with SP SAPKIBKS05.
SAP_ABA 640 with SP SAPKA64013.
Please let me know whether above service packs are OK or do we need to upgrade.
Vadim
When I upload CSV which you sent me earlier the log shows all green indicators without any errors in ST22 or SLG1(error log).
Only below 4 lines appear in the CCM web appln log.
Green Uploading catalog WALMART
Green Name of file that was uploaded: C:\Project\UNSPSC\Walmart.csv
Green 06.02.2006 09:17:16: Starting CSV import for catalog WALMART
Green 06.02.2006 15:17:18: 0001 package(s) were processed
But getting error "No default schema found".
In Log it shows
The following exception was raised:
/CCM/CX_OBJECT_NOT_FOUND
The exception occurred at the following point:
Program /CCM/CL_SCHEMA_MANAGER========CP
Include /CCM/CL_SCHEMA_MANAGER========CM01B
Line 18
I dont understand why it is not getting loaded.
Please help me to get out of this issue.
Thanks
Jagdish

Similar Messages

CCM Catalog Mass upload problem

Dear Experts,
Could you please help me to find an answer to the below issue?
We are doing a mass catalog upload in CCM 2.0 => we are uploading our CSV file as follows:
Supplier ID A => Supplier name A => Item details A
Supplier ID B => Supplier name B => Item details B
etc.
Usually, I give the first Supplier ID when creating the Supplier catalog.
The upload process is working fine, BUT...
When the catalog has been uploaded, from the Procurement Catalog side there is only the first "Supplier ID A" what's beeing uploaded to all of the items instead of all the other respective Supplier IDs.
Therefore we have to change the rest of the Supplier IDs by mass changing the respective Proc Cat.
Do you know how we could keep all the other Supplier IDs?
Thanks a lot - imre
Edited by: Imre Matyas on Feb 8, 2010 11:09 AM

Hi,
In that case my solution will help.
Here is sample schema with custom characteristics. Please look at Z_SUPPLIER_ID and Z_SUPPLIER_NAME.
SAP CATALOG CSV 2.0 <;>
Defaults;EN
Model
Catalog;Master;;Master Catalog
Characteristic;Z_ACTION;/CCM/NAME;false;Action
Characteristic;/CCM/PRODUCT_ID;/CCM/ID;false;Part Number
Characteristic;/CCM/SHORT_DESCRIPTION;/CCM/DESCRIPTION;false;Description
Characteristic;Z_MATERIAL_TYPE;/CCM/ID;false;Material Type
Characteristic;/CCM/MINIMUM_QUANTITY;/CCM/MINIMUM_QUANTITY;false;Order Unit
Characteristic;Z_CONTENT;/CCM/MINIMUM_QUANTITY;false;Content
Characteristic;/CCM/LEAD_TIME;/CCM/LEAD_TIME;false;Lead Time
Characteristic;Z_SUPPLIER_ID;/CCM/ID;false;Supplier Number
Characteristic;Z_SUPPLIER_NAME;/CCM/NAME;false;Sup Name
Characteristic;Z_P_GROUP;/CCM/ID;false;Purchasing Group
Characteristic;Z_P_ORG;/CCM/ID;false;Purchasing Org
Characteristic;/CCM/CONTRACT_ID;/CCM/ID;false;Contract Number
Characteristic;/CCM/CONTRACT_ITEM_ID;/CCM/ID;false;Contract Item
Characteristic;/CCM/PRODUCT_GROUP;/CCM/ID;false;Product Category
Characteristic;/CCM/PRICE;/CCM/PRICE;true;Price
Characteristic;Z_DATE;DATE;false;Date
Characteristic;Z_UPDATE_BY;/CCM/ID;false;Updated By
Characteristic;/CCM/LONG_DESCRIPTION;/CCM/LONG_DESCRIPTION;false;Long Description
Characteristic;/CCM/PICTURE;/CCM/ATTACHMENT;false;Picture
Characteristic;Z_BUYER;/CCM/ID;false;Buyer
Characteristic;Z_BUYER_CONTACT;/CCM/ID;false;Buyer Contact Number
Schema;Master;Z_ACTION;Z_MATERIAL_TYPE;Z_CONTENT;Z_SUPPLIER_ID;Z_SUPPLIER_NAME;Z_P_GROUP;Z_P_ORG;Z_DATE;Z_UPDATE_BY;Z_BUYER;Z_BUYER_CONTACT;Master Schema
Regards,
Masa

CCM catalog upload monitoring via XI

Hi ,
we are running SRM 4.0 with CCM 2.0 and we upload supplier catalogs via XI into our CCM (BMEcat format).
In most of the cases the upload works well. But sometimes the content doesn't reach the catalog. The problem is, that the log file (access via the CCM admin page) doesn't tell me what is wrong. Also in SLG1 I get no sufficient information about the problem. I assume that the file got stuck into the XI. Unfortunately I am no XI expert. How can I monitor my catalog uploads in the XI environment? I heard about TA SXMB_MONI. Maybe someone can give me a hint how I can see if there is something wrong on the XI site and how I can re-start a stuck catalog upload on the XI.
Best regards
Tom

Thomas,
You can execute the transaction SXI_MONITOR and look at the errored messages, if you are comfortable with the SAP GUI. Else, you will have look at the run time workbench and look at the error messages.
In both cases there will be reasons give as to why the message has been errored out. And you will also find the options to resend the same message.
Regards,
Ravi
Note : Please reward the helpful posts.

LR 4.4 (and 5.0?) catalog: a problem and some questions

Introductory Remark
After several years of reluctance this March I changed to LR due to its retouching capabilities. Unfortunately – beyond enjoying some really nice features of LR – I keep struggling with several problems, many of which have been covered in this forum. In this thread I describe a problem with a particular LR 4.4 catalog and put some general questions.
A few days ago I upgraded to 5.0. Unfortunately it turned out to produce even slower ’speed’ than 4.4 (discussed – among other places – here: http://forums.adobe.com/message/5454410#5454410), so I rather fell back to the latter, instead of testing the behavior of the 5.0 catalog. Anyway, as far as I understand this upgrade does not include significant new catalog functions, so my problem and questions below may be valid for 5.0, too. Nevertheless, the incompatibility of the new and previous catalogs suggests rewriting of the catalog-related parts of the code. I do not know the resulting potential improvements and/or new bugs in 5.0.
For your information, my PC (running under Windows 7) has a 64-bit Intel Core i7-3770K processor, 16GB RAM, 240 GB SSD, as well as fast and large-capacity HDDs. My monitor has a resolution of 1920x1200.
1. Problem with the catalog
To tell you the truth, I do not understand the potential necessity for using the “File / Optimize Catalog” function. In my view LR should keep the catalog optimized without manual intervention.
Nevertheless, when being faced with the ill-famed slowness of LR, I run this module. In addition, I always switch on the “Catalog Settings / General / Back up catalog” function. The actually set frequency of backing up depends on the circumstances – e.g. the number of RAW (in my case: NEF) files, the size of the catalog file (*.lrcat), and the space available on my SSD. In case of need I delete the oldest backup file to make space for the new one.
Recently I processed 1500 photos, occupying 21 GB. The "Catalog Settings / Metadata / Automatically write changes into XMP" function was switched on. Unfortunately I had to fiddle with the images quite a lot, so after processing roughly half of them the catalog file reached the size of 24 GB. Until this stage there had been no sign of any failure – catalog optimizations had run smoothly and backups had been created regularly, as scheduled.
Once, however, towards the end of generating the next backup, LR sent an error message saying that it had not been able to create the backup file, due to lack of enough space on the SSD. I myself found still 40 GB of empty space, so I re-launched the backup process. The result was the same, but this time I saw a mysterious new (journal?) file with a size of 40 GB… When my third attempt also failed, I had to decide what to do.
Since I needed at least the XMP files with the results of my retouching operations, I simply wanted to save these side-cars into the directory of my original input NEF files on a HDD. Before making this step, I intended to check whether all modifications and adjustments had been stored in the XMP files.
Unfortunately I was not aware of the realistic size of side-cars, associated with a certain volume of usage of the Spot Removal, Grad Filter, and Adjustment Brush functions. But as the time of the last modification of the XMP files (belonging to the recently retouched pictures) seemed perfect, I believed that all my actions had been saved. Although the "Automatically write changes into XMP" seemed to be working, in order to be on the safe side I selected all photos and ran the “Metadata / Save Metadata to File” function of the Library module. After this I copied the XMP files, deleted the corrupted catalog, created a new catalog, and imported the same NEF files together with the side-cars.
When checking the photos, I was shocked: Only the first few hundred XMP files retained all my modifications. Roughly 3 weeks of work was completely lost… From that time on I regularly check the XMP files.
Question 1: Have you collected any similar experience?
2. The catalog-related part of my workflow
Unless I miss an important piece of knowledge, LR catalogs store many data that I do not need in the long run. Having the history of recent retouching activities is useful for me only for a short while, so archiving every little step for a long time with a huge amount of accumulated data would be impossible (and useless) on my SSD. In terms of processing what count for me are the resulting XMP files, so in the long run I keep only them and get rid of the catalog.
Out of the 240 GB of my SSD 110 GB is available for LR. Whenever I have new photos to retouch, I make the following steps:
create a ‘temporary’ catalog on my SSD
import the new pictures from my HDD into this temporary catalog
select all imported pictures in the temporary catalog
use the “File / Export as Catalog” function in order to copy the original NEF files onto the SSD and make them used by the ‘real’ (not temporary) new catalog
use the “File / Open Catalog” function to re-launch LR with the new catalog
switch on the "Automatically write changes into XMP" function of the new catalog
delete the ‘temporary’ catalog to save space on the SSD
retouch the pictures (while keeping and eye on due creation and development of the XMP files)
generate the required output (TIF OR JPG) files
copy the XMP and the output files into the original directory of the input NEF files on the HDD
copy the whole catalog for interim archiving onto the HDD
delete the catalog from the SSD
upon making sure that the XMP files are all fine, delete the archived catalog from the HDD, too
Question 2: If we put aside the issue of keeping the catalog for other purposes then saving each and every retouching steps (which I address below), is there any simpler workflow to produce only the XMP files and save space on the SSD? For example, is it possible to create a new catalog on the SSD with copying the input NEF files into its directory and re-launching LR ‘automatically’, in one step?
Question 3: If this I not the case, is there any third-party application that would ease the execution of the relevant parts of this workflow before and/or after the actual retouching of the pictures?
Question 4: Is it possible to set general parameters for new catalogs? In my experience most settings of the new catalogs (at least the ones that are important for me) are copied from the recently used catalog, except the use of the "Catalog Settings / Metadata / Automatically write changes into XMP" function. This means that I always have to go there to switch it on… Not even a question is raised by LR whether I want to change anything in comparison with the settings of the recently used catalog…
3. Catalog functions missing from my workflow
Unfortunately the above described abandoning of catalogs has at least two serious drawbacks:
I miss the classification features (rating, keywords, collections, etc.) Anyway, these functions would be really meaningful for me only if covering all my existing photos that would require going back to 41k images to classify them. In addition, keeping all the pictures in one catalog would result in an extremely large catalog file, almost surely guaranteeing regular failures. Beyond, due to the speed problem tolerable conditions could be established only by keeping the original NEF files on the SSD, which is out of the question. Generating several ‘partial’ catalogs could somewhat circumvent this trap, but it would require presorting the photos (e.g. by capture time or subject) and by doing this I would lose the essence of having a single catalog, covering all my photos.
Question 5: Is it the right assumption that storing only some parts (e.g. the classification-related data) of catalog files is impossible? My understanding is that either I keep the whole catalog file (with the outdated historical data of all my ‘ancient’ actions) or abandon it.
Question 6: If such ‘cherry-picking’ is facilitated after all: Can you suggest any pragmatic description of the potential (competing) ways of categorizing images efficiently, comparing them along the pros and contras?
I also lose the virtual copies. Anyway, I am confused regarding the actual storage of the retouching-related data of virtual copies. In some websites one can find relatively old posts, stating that the XMP file contains all information about modifying/adjusting both the original photo and its virtual copy/copies. However, when fiddling with a virtual copy I cannot see any change in the size of the associated XMP file. In addition, when I copy the original NEF file and its XMP file, rename them, and import these derivative files, only the retouched original image comes up – I cannot see any virtual copy. This suggests that the XMP file does not contain information on the virtual copy/copies…
For this reason whenever multiple versions seem to be reasonable, I create renamed version(s) of the same NEF+XMP files, import them, and make some changes in their settings. I know, this is far not a sophisticated solution…
Question 7: Where and how the settings of virtual copies are stored?
Question 8: Is it possible to generate separate XMP files for both the originally retouched image and its virtual copy/copies and to make them recognized by LR when importing them into a new catalog?

A part of my problems may be caused by selecting LR for a challenging private project, where image retouching activities result in bigger than average volume of adjustment data. Consequently, the catalog file becomes huge and vulnerable.
While I understand that something has gone wrong for you, causing Lightroom to be slow and unstable, I think you are combining many unrelated ideas into a single concept, and winding up with a mistaken idea. Just because you project is challenging does not mean Lightroom is unsuitable. A bigger than average volume of adjustment data will make the catalog larger (I don't know about "huge"), but I doubt bigger by itself will make the catalog "vulnerable".
The causes of instability and crashes may have NOTHING to do with catalog size. Of course, the cause MAY have everything to do with catalog size. I just don't think you are coming to the right conclusion, as in my experience size of catalog and stability issues are unrelated.
2. I may be wrong, but in my experience the size of the RAW file may significantly blow up the amount of retouching-related data.
Your experience is your experience, and my experience is different. I want to state clearly that you can have pretty big RAW files that have different content and not require significant amounts of retouching. It's not the size of the RAW that determines the amount of touchup, it is the content and the eye of the user. Furthermore, item 2 was related to image size, and now you have changed the meaning of number 2 from image size to the amount of retouching required. So, what is your point? Lots of retouching blows up the amount of retouching data that needs to be stored? Yeah, I agree.
When creating the catalog for the 1500 NEF files (21 GB), the starting size of the catalog file was around 1 GB. This must have included all classification-related information (the meaningful part of which was practically nothing, since I had not used rating, classification, or collections). By the time of the crash half of the files had been processed, so the actual retouching-related data (that should have been converted properly into the XMP files) might be only around 500 MB. Consequently, probably 22.5 GB out of the 24 GB of the catalog file contained historical information
I don't know exactly what you do to touch up your photos, I can't imagine how you come up with the size should be around 500MB. But again, to you this problem is entirely caused by the size of the catalog, and I don't think it is. Now, having said that, some of your problem with slowness may indeed be related to the amount of touch-up that you are doing. Lightroom is known to slow down if you do lots of spot removal and lots of brushing, and then you may be better off doing this type of touch-up in Photoshop. Again, just to be 100% clear, the problem is not "size of catalog", the problem is you are doing so many adjustments on a single photo. You could have a catalog that is just as large, (i.e. that has lots more photos with few adjustments) and I would expect it to run a lot faster than what you are experiencing.
So to sum up, you seem to be implying that slowness and catalog instability are the same issue, and I don't buy it. You seem to be implying that slowness and instability are both caused by the size of the catalog, and I don't buy that either.
Re-reading your original post, you are putting the backups on the SSD, the same disk as the working catalog? This is a very poor practice, you need to put your backups on a different physical disk. That alone might help your space issues on the SSD.

Need a fix for Muse upload problems to GoDaddy???? I found one!

GoDaddy now has a new cpanel named "Plesk". In that panel you will find File Manager. (I use the Windows version). In the left panel of File Manager, you will see the root directory and all of its subfolders. When you click on any of these folders, you will see their contents in the right panel. You will also see a folder labelled "httpdocs". This is the default folder that is set up in GoDaddy to be your "home" folder. So, to fix your upload problems, do these steps:
1. Click on the httpdocs folder to see it open in the right panel. In the toolbar above the right panel, you will see a green plus sign with the word "New". Click on this drop-down menu.
2. Choose "directory"
3. Type in the name of one of the folders that your site will need, e.g. images, css, assets, scripts, etc. This basically creates a subfolder within the httpdocs folder, right? (There is a way to see how your Muse site sets up these folders prior to publish or upload. You do this by choosing "Export as HTML" in the File menu of Muse, creating a folder on your desktop (or wherever) for the HTML export, then inspecting its contents after your save it.)
4. Continue to create all the subfolders within httpdocs that you will need. Unfortunately, you have to do this one folder at a time.
5. After you have them set up, begin the process of uploading your site, like this:
6. In the File menu in Muse, you'll of course see "Upload to FTP Host ...". Click on it.
7. A dialog box will open. In the top text field, type in your website name ... you must use www. with your entry
8. In the "FTP Host" field, type in your domain name again like this ... "ftp.yourdomain.com" ... NO FORWARD SLASHES!!! (even if you find instructions to the contrary, like in Filezilla) (Also, your domain might be a .org or .net, instead of a .com)
9. In the "Host directory" field, YOU MUST ENTER "httpdocs"!!!! Despite what you learn, DO NOT LEAVE THIS FIELD BLANK!!!
10. Then enter your GoDaddy username and password. (If you set up a different username for your GoDaddy account and your Plesk account, like I did, then use your Plesk username and password.)
11. Click on "Upload: All Files"
The next few steps are tedious, but necessary to keep your site organized on GoDaddy and to keep from confusing things. You can probably get away with it, but, if your site doesn't load properly in a browser after doing the above steps, you'll need to click on each folder in the root directory that you copied as a subfolder in the "httpdocs" folder and delete the files. For example, in the left panel of File Manager, you'll see the root directory. Click on the "images" folder. If there are any images that you need for your site in that folder, delete them. Remember ... you've already copied them over to the images subfolder in httpdocs during your last upload described in the instructions above. If you don't trust that you can delete them, click on the "httpdocs" folder, then click on the "images" folder and check the files. Same files, right? So, go ahead and delete the site files that you find in the appropriate folders in the root directory, making sure that you don't delete the ones that are NOT duplicated within the "httpdocs" folder. Also remember that your .html pages will not require a subfolder to be set up in the "httpsdocs" folder. They can just sit there, looking pretty. But you will have to delete them from the root directory to keep things tidy. Just click on the folder icon next to "root directory", and you'll see those html pages in the right panel. Again, delete them.
REMEMBER: To keep your Muse uploads to your GoDaddy site error free, you must ALWAYS make sure that "httpdocs" appears in the "Host directory" field in the "Upload to FTP Host ..." dialog box in Muse. And all files and folders that your site needs MUST go in the "httpdocs" folder in the root directory of your site in GoDaddy's File Manager (now found in your Plesk Panel).
I hope this wasn't too confusing. If so, call GoDaddy. I called them with this fix and they are using it in their phone support.

Thank you! Thank you! Thank you! I was going out of my mind. And GoDaddy was no help (although they're usually really good.) I put all the folders in "httpdocs" and the website worked perfectly!

Supplier Catalog upload w/o Prodcut ID in SRM MDM CATLOG

Hi experts,
The supplier catalog loaded by supplier, will not have Product ID. I believe , even though we don't have product id, we can create a SC in SRM.
Will there be any isuue , if v r not geting the prodcut id in catalog upload file by supplier.?
I think this SC will be a created as free text in sap SRM. Is supplier part number equivalent to Prodcut id?
Plz help.
Thanks,
SK

Q The supplier catalog loaded by supplier, will not have Product ID. I believe , even though we don't have product id, we can create a SC in SRM.
A:- Yes. you can . it creates based on product category sc
Will there be any isuue , if v r not geting the prodcut id in catalog upload file by supplier.?
I think this SC will be a created as free text in sap SRM.yes.
Q Is supplier part number equivalent to Prodcut
id?
A :-product id and supplier part number are totally different.
for eg oci fields for product no :- NEW_ITEM-MATNR[n]
spn :- NEW_ITEM-VENDORMAT[n]
br
muthu

CCM 2.0 automatic catalog upload

Hi, experts
We are using SRM 7.0 and CCM 2.0, we would like to know if there is a FM to make the catalogs upload automatic, or if is possible to develop it, which way we'd proceed.
Thanks in advanced.

Hi,
Please check this old thread.
CCM automatic upload of CSV files
You can also generate XML and path CCM upload interface.
I don't have access to old CCM landscape and not sure the interface name.
Please note CCM support will be expired. It would be nice if you develop a program which can be used for SRM-MDM Catalog.
Regards,
Masa

A different uploading problem

I have read through the discussions and see that a lot of people are having an uploading problem. I am too, but my problem is a little different. When I upload my photos, everything seems to be fine, all the pages turn from blue to red, and it appears to be done. But, if I quit iWeb, it says it hasn't finished uploading. When I go to the site on the web, everything is there. So, it seems to not be finalizing the last little part where it marks the files as uploaded.
I am using iWeb 1.1.1.
I have tried deleting the files from my iDisk and uploading again.
I have repaired permissions.
I have deleted the file com.apple.iWeb.plist
It's not that I'm trying to quit too soon, I have left it for hours, even overnight, and it doesn't complete.
There's a small circle to the right of the word site that fills in to show progress as it's finishing, and that gets to the point where there's only a small sliver of white.
Any ideas? Thanks for the help!
Kirsten
MacBook Mac OS X (10.4.7)

Have you tried "Publish ALL to .Mac"?

Lightroom catalog permission problem!

Hi everyone,
please help me solve this problem. I reinstall OS X last night to new Yosemite. I did clean install. I made TM backup of my old OS X on external LaCie hdd. I copied my catalog from the backup into my pictures folder on an internal hdd. When I tried to open it this message pops up "Lightroom cannot use the catalog named “Lightroom 5 Catalog” because it is not writable and cannot be opened.". Just to be clear the "get info" permissions are set for "Me" R/W. I don't have any different file inside the folder "pictures" only my catalog.ircat. I can't open original file from the LaCie backup, also permission problem. Thanks for help.

it's all ok. The file for some reason have some info written about the owner. I did change that but it does not matter and still don't work. If I want rename the file then I have to put the password and that is why LR can't work with it. I found the solution already (after 5 hours searching the internet) This helped me http://backdrift.org/fixing-mac-osx-file-permissions-and-acls-from-the-command-line I used sudo chmod -N /here is path to the file/ and enter. This solved all my trouble and I can open the catalog without problems.

Uploading problem with Ebay and Dreamweaver MX

I am unable to sync websites with Dreamweaver MX 6.01. When I connect to the remote server, it shuts down the program. I have reinstalled the program, but it still does it. Also, when I use Safari, Opera, and Firefox to upload photos on Ebay, the upload process fails completely, and blows me directly into My Ebay, as if I was not on the selling page at all. I have to go to my PC to do the photo uploads. Seems like it may be a related issue, some kind of uploading problem with Rosetta, or something. I am using a Macbook Pro with the 2.0Ghz processor, connected with ethernet cable, and firewall is set to off. Any ideas?

For E-Bay you might try the following:
Type the following command in Terminal (while Safari is NOT running):
defaults write com.apple.Safari IncludeDebugMenu 1
Then launch Safari, and you will be able to use the new Debug menu.
If you ever wish to disable it again, just repeat the command with a "0" instead of a "1".
Under the Debug menu, you'll see the User Agent sub-menu; select Windows MSIE 6.0 from the list and then try connecting to your web site
Dreamweaver you might need to update your version.
To Dreamweaver 8.01
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=f56452a8

Uploading problems with Safari 4.1.3 -

Hello, I just thought this was a funny question to ask -
On my PowerPC G5 tower, running OS 10.4.11, and my question is in regards to Safari version 4.1.3 uploading problems for facebook and youtube... I always have to use FireFox version 3.6.13... and not without trouble either.
I get it. I need a new computer, but I just thought it fascinating why one works 90% of the time and the other never works.

Firefox is way more upto date than Safari in 10.4.11, but TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
Also I think they Require Flash &/or Java, which may be a problem in 10.4

Is Safari the problem? upload problems after Leopard install...

I installed maximum ram and leopard 10.5 on my old emac and it runs great. I had problems uploading photos to ebay, and attachments to emails, so I installed ilife hoping the upgrade would fix the problem. Nope, when I attempt to upload, the icon just spins and spins, on and on. Could this be a Safari problem? Very frustrated, totally stumped.

I'm not sure how to link to the iPhoto post thread that help me solve my upload problem. But it is solved. I had to resize the jpeg pic files to 640x320 because my files were way to big. Thanks Old Toad!

Problem with catalog upload program !!

Hi GURUs,
Using CCM upload program we are trying to upload a file for deleting/adding/changing supplier catalog items.
- Some times it work fine.
- But some times supplier catalog is going into error.
- The display log on CCM screen is all green with no errors.
- When checked in SLG1 we are getting error "Error when deleting item XXXXXXX (ID)",though the item is present in supplier catalog.
Kindly help.
Note: We are at CCM2.0
Thanks in Adv. !!
Vivek

Hi Serguei,
Thanks for your reply.
our content file format is XLS (Excel sheet). We are having customized program to load the data into CCM. The program inturn convert the .XLS file into XML format. This program is directly submitting the jobs in background to load the data into CCM.
Due to this I am not sure how to debug this and capture the defect.
Kindly help.
Thanks in Adv. !!
Vivek

How to Debug CCM Catalog Upload Process

SRM Gurus,
Can anyone please outline the steps to debug the uploading process of the .CSV file in CCM 2.0?
The upload of my supplier catalog terminated due to an error and I'd like to debug to see what's causing the error.
Any tips would be greatly appreciated.
SN

Hi
Check for logs created in SLG1 Transaction to know, the causes of dump, if any.
Also see reports /CCM/INITALLISE_CME , SRM_EXTRACTED_CTLG.
Please go through the following SAP OSS Notes below ->
Note 1043305 SRM_EXTRACTED_CTLG upload terminates with error.
Note 950500 Source Cat.of enriched cat.item missing
Note 858615 Lock problem for many products
Note 852622 "Category not found" termination at publication
Note 844547 Impossible to create characteristics using upload
Note 747454 Data enhancement: Error characteristic-category-relationship
Note 1024002 - Error introduced by CCM SP07
Related links ->
Re: Unable to Edit the Charateristic?
Re: problem after uploading user defined characterstic schema in product catalo
Re: CCM 2.0
Re: Unable to run the report /CCM/initialise_cme
Do let me know.
Regards
- Atul

Catalog upload

I all,
I'm managing CCM Catalog. I wanted to add a new characteristic into a catalog...
I created a Purchase Catalog and uploaded the following file csv:
SAP CATALOG CSV 2.0 <;> full
Defaults IT
Model
#Catalogo Id Catalogo Codice Tipo Catalogo 1Acquisti 2Fornitore Descrizione
Catalog TERNA S.P.A. Catalogo Terna S.p.A.
#CHARACTERISTIC Id Caratteristica Tipo Dato Multi-valore Descrizione Caratteristica
CHARACTERISTIC Z_VAL_MIN price_type FALSE Valore Minimo
CHARACTERISTIC /CCM/PRODUCT_ID /CCM/ID FALSE Valore Minimo
CHARACTERISTIC /CCM/SHORT_DESCRIPTION /CCM/DESCRIPTION FALSE Valore Minimo
CHARACTERISTIC /CCM/PRICE /CCM/PRICE TRUE Valore Minimo
CHARACTERISTIC /CCM/HAS_DAILY_PRICE /CCM/FLAG FALSE Valore Minimo
CHARACTERISTIC /CCM/PRODUCT_GROUP /CCM/ID FALSE Valore Minimo
CHARACTERISTIC /CCM/BASE_UOM /CCM/UNIT_CODE FALSE Valore Minimo
CHARACTERISTIC /CCM/ORDER_UNIT /CCM/UNIT_CODE FALSE Valore Minimo
CHARACTERISTIC /CCM/PRICE_BASIS_QUANTITY /CCM/PRICE_BASIS_QUANTITY FALSE Valore Minimo
CHARACTERISTIC Z_VAL_MIN /CCM/PRICE FALSE Valore Minimo
CHARACTERISTIC /CCM/LEAD_TIME /CCM/LEAD_TIME FALSE Valore Minimo
CHARACTERISTIC /CCM/SUPPLIER_ID /CCM/ID FALSE Valore Minimo
CHARACTERISTIC /CCM/SUPPLIER_NAME /CCM/NAME FALSE Valore Minimo
CHARACTERISTIC /CCM/CONTRACT_ID /CCM/ID FALSE Valore Minimo
CHARACTERISTIC /CCM/CONTRACT_ITEM_ID /CCM/ID FALSE Valore Minimo
#SCHEMA SCHEMA ID Characteristic DESCRIPTION TEXT
SCHEMA GRUPPI MERCI Z_VAL_MIN GRUPPI MERCI
CATEGORY A001001 CANCELLERIA
CATEGORY 201A MORSETTI E VARIE AT
CATEGORY 301A ISOLATORI BT VETRO
CATEGORY 204A MORSETTIERE COMPONIB
CATEGORY A101 TRASPORTO
....When I cretated the supplier catalog and uploded the following csv file...there is a mistake...
SAP CATALOG CSV 2.0 <;> full
Defaults IT
CONTENT
#Item Valuation Category ID CHARACTERISTIC 1 CHARACTERISTIC 2 CHARACTERISTIC 3 CHARACTERISTIC 4 CHARACTERISTIC 5 CHARACTERISTIC 6 CHARACTERISTIC 7 CHARACTERISTIC 8 CHARACTERISTIC 9 CHARACTERISTIC 10 CHARACTERISTIC 11 CHARACTERISTIC 12 CHARACTERISTIC 13 CHARACTERISTIC 14 CHARACTERISTIC 15 CHARACTERISTIC 16 CHARACTERISTIC 17
Item Valuation Category ID /CCM/PRODUCT_ID /CCM/SHORT_DESCRIPTION /ccm/price[1]#/ccm/amount /ccm/price[1]#/ccm/currency_code /CCM/HAS_DAILY_PRICE /CCM/PRODUCT_GROUP /CCM/BASE_UOM /CCM/ORDER_UNIT /CCM/PRICE_BASIS_QUANTITY#/CCM/QUANTITY_VALUE /CCM/PRICE_BASIS_QUANTITY#/CCM/UNIT_CODE Z_VAL_MIN#/ccm/amount Z_VAL_MIN]#/ccm/currency_code /CCM/LEAD_TIME /CCM/SUPPLIER_ID /CCM/SUPPLIER_NAME /CCM/CONTRACT_ID /CCM/CONTRACT_ITEM_ID
1 A001001 27 Stampante Da Tavolo 30 EUR FALSE CANCELLERIA AE AE 1 AE 10 EUR 30 408 NOVA TIPOROM S.r.l 4400000113 1
...Does someone can explai me what is the problem...is it related to my new field(Z_VAL_MIN)...this field must be created also in Supplier catalog?...
Thank very much, Best Regards,
Maria

Elements 11 is installed on the computer with about 9000 images in monthly files cataloged in 30 odd categories etc. My only thought at the moment is that if I load in each months file the key words etc will probably be detected if not the full 3d structure.
John

Catalog upload problem..

Similar Messages

Maybe you are looking for