Cc 2014 update results in no video anymore

Performed an update to CC 2014 suite and now Premiere outputs no video. Not in the source monitor or the program/sequence monitor (as if playing audio only, but without a waveform). Video output to a "playback" monitor is full white. Importing new video, or "replacing video" has the same result - audio only on all video files. How do I uninstall the update? I have a critical project at work coming immediately and do not have time for this.
MacPro
OSX

Hi MPermenter,
mpermenter wrote:
It's OSX 10.7.5
2x ATI HD 5770
And there is no option to update display drivers on Mac - they include it with updates if they choose. No option to download OS X drivers from AMD/ATI either.
OS X 10.7.x is no longer supported for Premiere Pro CC 2014.1. You must update OS X to OS X 10.8.x, or later.
Please try this first.
Although it's possible to run the current version of Premiere Pro on OS X 10.7, you could experience various unexpected behaviors that might making working with the project difficult.
Do your AMD 5770 GPUs have 1 GB of VRAM or 512 MB? The 512 MB version of the card exhibits some pretty bad behavior for some projects, especially complicated ones. I would be wary of that card and would consider updating the card, or if you can't, look into getting a new computer.
Also, it is not good editing protocol to update project files to a major version like Premiere Pro 2014.1. Please consider reverting to the previous version of Premiere Pro to get your work done, then move to the new version when your project is complete. That is what most people would suggest, in general. However, 2014.1 seems to be particularly hard on project files that are updated from projects with complicated or multicamera sequences. I would not recommend it.
Hope that helps,
Kevin

Similar Messages

I have updated my iPad to IOS 8.1.2. And now I cant watch any videos anymore. Not on Facebook, YouTube, etc. How can I fix this?

I have updated my iPad to IOS 8.1.2. And now I cant watch any videos anymore. Not on Facebook, YouTube, etc. How can I fix this?

We also want your phone to work the way it should be working for you.
How long does a charge last since the update?
Have you reset the network settings? Settings>General>Reset>reset Network Settings>Enter 4 digit passcode>Reset Network Settings
TamaraH_VZW
Follow us on Twitter @VZWSupport

I cannot play videos anymore after last adobe flash update

I cannot play videos anymore after the last adobe flash update. The screen shows "plug-in failure".

What system are you running? There's a problem with current Flash 13 version. You can download an earlier 12 version here: Archived Flash Player versions
OT

After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU.

After updating ios6 I can't access my downloaded iTunesU videos anymore. They come up in search but video app says 'no videos'. I have the new iPad and the latest version of iTunesU. How can I get the video app working with the iTunesU again?

I have a similar problem with ITunesU, I used to be able to access them from my car dock, but now they dont appear and the fwd/back buttons on the steering wheel wont affect them.
It seems taking them from ITunes into their own app has confused many other applications or dock connectors. Im going to try and remove the ITunesU app as I dont want to have lost the extra functionality

Details of video preview with Mercury Transmit in the 2014 update to After Effects CC

In the 2014 update to After Effects CC, which is available today, the technology used for video preview on an external monitor has been replaced with Mercury Transmit technology from Premiere Pro. Read about it in detail here:
http://bit.ly/AE_video_preview
Please post in this thread to discuss or ask questions about these changes.
Read about all of the other changes coming to the 2014 update to After Effects CC here:
http://bit.ly/AE_CC_next_details

Jef,
It's your choice if you wish to use Mercury Transmit with your AJA cards, or the AJA Preview plug-in. You do not need to uninstall anything, but you should disable the one you are not using.
The differences between the two are subtle, but can be simplified (very grossly simplified) to speed vs. accuracy.
The AJA Preview plug-in has a performance advantage over Mercury Transmit. AJA is able to optimize the frame throughput because they have better access to their hardware. You should be able to get real-time previews under most circumstances.
Mercury Transmit has better access to the After Effects pixel buffer than the AJA Preview plug-in. For example, when color management is enabled in the project, Mercury Transmit will apply color transforms. These color transforms require additional processing, which can slow down the preview speed and drop it below real-time.
Performance of video preview in After Effects (any version, using any of the available technologies) otherwise tends to be a straightforward equation of the computer's processor horsepower vs. the requirements of the frames being pushed (frame size + frame rate + color depth + color management). In the "performance of RAM preview when video preview is enabled" section of this page, I've detailed what levers you can pull to affect the performance of video preview in After Effects:
http://blogs.adobe.com/aftereffects/2014/05/video-preview-mercury-transmit-after-effects.h tml
If you continue to have problems, please post more detail about the settings you are using, especially whether you are using greater than 8-bpc color or color management in the project. Machine specs and the state of the machine, including the amount of RAM, free RAM, and other applications running, will also be helpful. Please also state, given all of the above, what frame rate is being reported in the Info panel during RAM preview playback.

After updating my apple pad 3 , i cant make video anymore! somebody can tell me why e what can i do? thanks so match

after updating my apple pad 3 , i cant make video anymore! somebody can tell me why e what can i do? thanks so match

Try sliding the words up/down to select the various modes.

PS CC (since JAN 2014 update) Layer-mask editing causes hangs/crashes

ONLY since JAN 2014 update, PS CC has been hanging/crashing when I paint/edit a layer mask. All may be well at first (or not), but suddenly the display of the mask (or mask overlay on the layer itself, as shown when hitting backslash key) is not shown in full but renders in s-l-o-w-l-y in rectilinear pieces <snapshot below was taken before video card upgraded but is still typical of what I mean>. When I view Windows' Task Manager for PS, I see my CPUs are each working at their upper limits (up to 80+-90+%), varying only by a few points, over a VERY long time... which could be MANY minutes. OR the System has decided PS is Not Responding.
In any case, whenever this happens, it means in all practicality PS CC is not working, so I either kill it or it's crashed.
Now, here's the thing: that VERY file, can immediately be opened in PS CS6 (which I have fortunately kept installed on my computer), and the mask will be as I thought it should be, and I can edit it as I always could, just fine! So it's obviously a PS CC thing, and I do NOT recall this happening prior to the JAN update. It is still a problem after the two subsequent updates.
I have not been able to determine the specific instances when this happens, as it seems to happen whenever I am editing a mask, no matter what size/softness/color brush, what magnification, what view mode, many or few layers, big or small file, etc.
I did upgrade my NVIDIA card (from GeForce GTX 260 [with current driver] to GTX660), just in case it was a factor (maybe kept it from crashing as fast? hard to tell... but it's still an unworkable problem). You can see from my Sys Info shown here from the PS CC Help menu that it should be more than sufficient for any PS CC task, and it's running the latest driver:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2664 MHz
Built-in memory: 16379 MB
Free memory: 12453 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=2048
gpu[0].RectTextureSize=16384
gpu[0].Renderer="GeForce GTX 660/PCIe/SSE2"
gpu[0].RendererID=4544
gpu[0].Vendor="NVIDIA Corporation"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="9.18.13.3221"
gpu[0].Driver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
gpu[0].DriverDate="20131219000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.1"
gpu[0].CUDASupported=1
gpu[0].CUDAVersion="6.0.1"
gpu[0].OCLBandwidth=1.16816e+011
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[16384]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[2048]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]
I work on digital-photography files, and use a layer mask in almost every file, so this relatively-recent bug is a big PITA, having to switch back and forth between CS6 and CC!
Until there's a fix... is there a way to roll-back my PS CC version to BEFORE the JAN 15, 2014 update?

I am not qualified to comment on technical issues; I'm just a user whose son in IT is my 'technical support department.' (But he's not much of a PS user.)
I'm pretty sure, however, that all my Prefs were set to the same things BEFORE the Jan 16, 2014 PS CC update as after (unless the update itself changed something I was unaware of... the settings APPEARED to be the same but I can't easily locate my notes of what my Prefs were from long ago).
And they were the same as the PS CS6 I have had installed on this same system for a very long time, with older video card with older driver, with newer driver; newer video card with newest driver, etc. Yet after that CC update, CC has not (until this workaround) worked re 'the masking bug' for me, yet CS6 has always worked just the same.
So I conclude that the only variable (other than the video card upgrade I did in an attempt to solve this and of course those Windows auto-updates) in this scenario IS something to do with PS *CC*, and after Jan 16, 2014.
As for restarting the machine vs. restarting PS, well, PS is the major player of my system, so when I shut that (and LR) down, I might as well 'clean things up' by Restarting. BTW, I am in the habit of closing and reopening PS (CC or CS6) whenever I finish with a file and load another, in order to get back some of that memory which PS never seems to want to let go. (This is not new to the latest versions, I think. My son says it's a 'memory hog'? ;-) ) I track its memory use in Windows' Task Manager and find that seems to let it 'refresh' itself. (See, I told you I'm not a technical person. ;-) ) But I do not think this has anything to do with the bug. Just a quirk of PS. Like when a tool goes all wonky (for example, its little icon becomes just a 'plus' sign even though the tool is still performing correctly, it's telling me, I think, that it would like to be restarted. And that makes it feel all better... I mean, tool icon reappears.)
Anyway... it's up to Adobe to figure out IF and what may be wrong with PS CC -- it still doesn't work for me as I had it configured at first, and I think it should, right? -- and to fix that... PLEASE. SOON.

PS CC(2014) update failed.

I was able to install LR, but PS I get update failed message.
any ideas?

Hi Madison,
Kindly share the below mentioned details so that we can assist you appropriately.
OS version:
Screenshot of the message that you are getting.
Meanwhile, please try the following steps and share the results.
Solution 1.
Rename 1.0 folder
Mac OS
In the Finder, select the Go menu and choose Go to Folder.
Enter the following location: ~/Library/Application Support/Adobe/AAMUpdater.
Select the 1.0 folder and rename it to ~1.0.
Windows 7 and 8
Go to C:\Users\<UserName>\AppData\Local\Adobe\AAMUpdater.
Select the 1.0 folder and rename it to ~1.0.
Re-launch Creative cloud, initiate the update
Solution 2.
Rename 1.0 folder from the path mentioned in the path above.
Launch Photoshop
Go to help> updates.
Follow the on screen instruction.
Solution 3. Try to download and install the patch manually.
All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
Kindly share the results once done.
Thanks,
Atul Saini

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines are not the up to date versions I had.

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines/sequences are not the up to date versions I had. I saved different version of this project for various purposes, but they were all named differently(i.e joe and mary wedding, joe and mary wedding 2, joe and mary wedding 3, joe and mary wedding 3.1). I do not know if they just pulled the timelines from the earliest version, eradicated the data entirely, or something else.
Since the program prompts me to create and save a new version for the updated premier, I still have the previous projects, but cannot open them. I imagine they are unchanged, but cannot be sure.
Thoughts? Is it possible to uninstall an update re-install it later?
Please advise.
Thank you.
Brian

Also...
Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

How to update to latest intel video driver

Using HP ENVY x360 u010dx notebook/tablet i can not update to latest intell video driver. I;m getting message that my drier is custom, so i'm redirect to hp site where i can only download older version of driver.
Current driver that i can download is :
Released: 2014-05-23 | Size: 146.29M
Version10.18.10.3574
Latest is
Intel® Iris™ and HD Graphics Driver for Windows* 7/8/8.1 64-bit 1/12/2015 15.36.14.64.4080
(Latest)
When can we expect this driver to be available for download on HP, or how can we install this driver.
NOTE I'm using Intel HD 4400 graphic card on intel i5 CPU.

@faruk_a ,
Hello and thank you for posting on the HP support forums. The only supported drivers for your system are at the support page. Here is the link to that page.
HP ENVY 15-u010dx x360 Convertible PC (ENERGY STAR) - Software & Drivers
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Ovi Suite 2.1.1.1 does not run Videos anymore

Hi all,
having upgraded to 2.1.1.1 my "Photos" page would not show my videos anymore.
The thumbnails are there (both for video and photos), also I can press play and the video seems to run (at least the progress bar does...).
Pressing pause updates the video frame, however upon resume the frame remains unchanged.
Worked well on the versions before....
Any thoughts ?
Solved!
Go to Solution.

Hi,
This is great news. I am glad you got the system working again.
Unfortunately we have not encountered this sort of issue before and therefore the actual troubleshooting was really hard. I apology all the inconvenience this caused to you.
The team will continue following this case and if any similar indications are seen this case shall be used for reference. We will also re-check our installation procedure to make sure it is not causing such misbehaving.

[solved] dwb browser doesnt play youtube video anymore

hello,
dwb ist just awesome, but since a few days, i cant play youtube videos anymore. i can start them, i can hear the sound, i can move my mouse to the time strip to see the picture at that point of time, but i dont get a video. the video screen is simply black. i dont have this problem with my other webkit browsers like luakit or uzbl.
any ideas?
greets lizzy
Last edited by caravanlizzy (2014-11-08 20:36:03)

Hello,
could someone that uses the dwb or luakit browser send me his useragent string entry? i still have some problems on some specific sites with mine! (i recognized, that youtube works when i change the useragent, but then i have problems on other sites)
thanks in advance, would be so helpful!
lizzy
Last edited by caravanlizzy (2014-11-07 18:51:22)

HT6114 after the update some programms didnt work anymore....

i dont know if there is a connection, but after the update, some programms didnt work anymore.
for example: „Hands Off!“ & „Adobe Indesign CS6“
anybody else?

Hands off have an update available for 10.9.2, Hand Off 2.1.2 dated 25th Feb 2014.
Check Adobe site for updates.

SharePoint Foundation 2013 - March 2014 Update Issue - Need help

We've just applied the SharePoint Foundation 2013 March 2014 Update, it always requires that we run the SharePoint Products Configuration Wizard at the end of install, but this time it's getting stuck at step 9 of 10 (the profile sync service cannot be
started even as admin). Is anyone else having any issues with this update? Has anyone else applied it yet? Is anyone else planning to apply it?
If anyone can help with advice on this I'd appreciate it.

Hi,
We can still access CA but sync will not start. Tried rebooting after the failed configuration and tried to run it again but it didn't work.
4/2014 10:45:16 5 ERR            Exception: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 5 ERR            An exception of type System.ServiceModel.EndpointNotFoundException was thrown. Additional exception information: There was no endpoint listening at
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at //localhost:32843/SecurityTokenServiceApplication/securitytoken. that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException,
if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 1 ERR          One or more configuration tasks has failed or some tasks were not run
4/2014 10:45:16 1 INF          Leaving function TaskDriver.OnTaskDriverStopping
04/14/2014 10:45:16 1 INF        Leaving function TaskDriver.ExecuteTasks
04/14/2014 10:45:16 1 ERR        One or more configuration tasks has failed to execute
4/2014 10:45:16 1 ERR          Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at D:\Logs\PSCDiagnostics_4_14_2014_10_44_8_154_1605984328.log, fix the problem, and run this configuration wizard again.
04/14/2014 10:45:16 1 INF          Entering function StringResourceManager.GetResourceString
4/2014 10:45:16 1 INF      Leaving function TaskDriver.Run
04/14/2014 10:45:16 1 ERR      Post setup configuration was not run successfully when using the command line task driver module
04/14/2014 10:45:16 1 INF    Leaving function PsconfigCommandLineMain.Main
This is the meaty part of the errors we are getting. Right now our entire site is down. If you know of anything to remedy these errors let me know.

"Tearing" issues on CC 2014 update

All,
I'm experiencing the "tearing" issues with 4K files on the latest Adobe Premiere CC 2014 update. I'm using GPU acceleration on my system and it should be able to easily handle 4k footage with CUDA and OPEN CL. All files are .MP4 format UHD 3840x2160 100mbs shot on a GH4. All files were captured on a Sandisk Extreme Pro 16gb (95mbs class 10 SDHC I). I have confirmed that files themselves are NOT corrupt as playback on the GH4 shows clean files:
My system:
Windows 7 ultimate (64bit)
Gigabyte Ga z97x gaming 7 mobo (latest bios)
coolermaster CPU cooler
Intel core i7 4771 @3.5ghz
GeForce GTX 780ti (344.75 driver)
16GB corsair DDR3 ram
Samsung 1tb SSD system drive
corsair 7x750m PSU
So...my system is pretty darn "beefy" scoring a consistent 10,000+ score on 3DMark (93%)
A few notes:
I AM using an all SSD workflow (system OS and applications all on Samsung 1TB SSD)
Editing SSD is 500GB Western Digital (I have tried files on both SSDs....same issues)
I mention the SSD's because there are some folks that swear AGAINST them in editing etc....
I'm seeing this happen in the SOURCE window....MOST of the time it translates into the sequence after render. Whats weird is that sometimes the rendered sequence file will have "tearing" in completely different areas than the source file!
I have and AERO theme turned ON (as suggested in this forum)
Overall, I'm ready to throw in the towel with frustration. I'm reading about a lot of issues being reported with the latest CC 2014 update...with a lot of forum users saying that they are falling back to software rendering etc. The promise of Open CL computing and CUDA rendering of 6k files on an off the shelf laptop is escaping me ( A quick Peek at Adobe Premiere Pro CC 2014.1 (v8.1) - YouTube )
Here is what I am seeing:
HELP Adobe - I'm reading about so much of the same issues with this latest update!

Hi Rave,
Thank you for taking the time to reply. I found that simply deleting the ~/Library/Application Support/Adobe/AAMUpdater/ directory was a faster solution than taking the time out of my day to uninstall and reinstall all of my Adobe apps. I will be submitting a bug report to address the issue with the Creative Cloud updater.
Thanks,
dtderong

Cc 2014 update results in no video anymore

Similar Messages

Maybe you are looking for