/CCEE/FISISTGRD table is not present
hi,
All the CCEE tables are present in my system except FISISTGRD.
But we want to make use of this table in the program..Can you please help..
one of the thread says table is
/CCEE/FISISTGRD Reasons for Reversal enabling to change
it's not present in std ECC6 too. must be part of some add on package or industry solution.
https://forums.sdn.sap.com/click.jspa?searchID=25291193&messageID=7046743
Similar Messages
-
/CCEE/FISISTGRD table is missing in SRO system.
hi,
All the CCEE tables are present in SRO system except FISISTGRD.
But we want to make use of this table in the program..Can you please help..one of the thread says table is
/CCEE/FISISTGRD Reasons for Reversal enabling to change
it's not present in std ECC6 too. must be part of some add on package or industry solution.
https://forums.sdn.sap.com/click.jspa?searchID=25291193&messageID=7046743 -
Getting "JTA transaction is not present" error while updating db table.
Hi All,
In one of my BPEL process, In a loop, I am updating value of database column Flag from 0 to 1. It was working fine in dev environment, but failed in Prod with below errors, Can Any one suggest on this.
There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
OPMN logs:
<2010-05-05 01:56:49,395> <ERROR> <gemptp.collaxa.cube.engine> The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
The current JTA transaction is not present or it is not in active state when processing activity or instance "1020112-BpInv7-BpSeq14.87-2". The reason is The execution of this instance "1020112-BpInv7-BpSeq14.87-2" for process "UpdateOrderReqABCS" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information..
Thanks in advance.I can envisage this happening only in a case where the update is taking a longer time than the value of JTA transaction timeout.
Is this happening for all BPEL instances or some of them get thru succesfully ?
Are you EVER updating that particular row of your table ( before/after) ?
-Shishir -
Table /dvsrepro/sepdol not present in ECC 6.0
Hi,
We are planning an upgrade from 4.6C to ECC 6.0. However while doing a preliminary study of ECC 6.0, we find that table /dvsrepro/sepdol, which is present in 4.6C is not present in ECC 6.0. We are using this table to print the output of batch jobs.
Request inputs on which is the table in ECC 6.0 that has replaced the above mentioned table, which can be used similarly?
Thanks in advance.
MickThanks Max for the prompt response.
Not sure that I have understood what you meant by checking its component? Do you mean that we should check whether it is part of SAP's Aerospace and Defense (A&D) solution? Also how can we check the tables component?
Regards,
Mick -
The table tablename is not present in this descriptor.
Hello, I'm using JDev & TopLink 9.0.3. I get the following descriptor errors. I'm not sure what they mean or how to resolve it. I re-mapped the Advisor descriptor, but with same results. Thanks.
EXCEPTION [TOPLINK-93] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.DescriptorException
EXCEPTION DESCRIPTION: The table [advsr_demographics] is not present in this descriptor.
DESCRIPTOR: Descriptor(com.diyh.model.javabeans.Advisor --> [DatabaseTable(party), DatabaseTable(advisor)])
EXCEPTION [TOPLINK-41] (TopLink - 9.0.3 (Build 423)): oracle.toplink.exceptions.DescriptorException
EXCEPTION DESCRIPTION: A non-read-only mapping must be defined for the sequence number field.
DESCRIPTOR: Descriptor(com.diyh.model.javabeans.Advisor --> [DatabaseTable(party), DatabaseTable(advisor)])I figured it out. My Table Reference in the parent descriptor was reversed. I removed it and created another reference with the source from the parent descriptor and the target from the child descriptor.
-
How to compare 2 different database to get table name which are not present in second database
How to compare 2 different database to get table name which are not present in second database
Sorry cannot test it right now
use db1
go
select * from sys.tables t where not exists
(select * from db2.sys.tables s where t.object_id=s.object_id)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Comparing two internal tables and deleting the record not present in second
Hi All,
I have a internal table itaba with PERNR as primary key and various other columns (1000 records) and table B with PERNR as primary key and 800 records.
Now what is the best way to compare these two and delete the record from table A when its corresponding record is not present in table B?
Thanks and Regards,
MohanHI SIR
u trained us in accenture
Hi all
when ever m running this session in SM35 , M getting error as :
"LEAVE TO TRANSACTION" MARA-BISMT is not allow
in batch input
REPORT YASEC_BDC_NIK_SESSION
no standard page heading
message-id zmm
line-count 65
line-size 150.
tables : mara.
*Top includr program
INCLUDE YNEW_MAIN_TOP.
*include yasec_bdc_nik_session_top.
***********selection screen *******************
selection-screen begin of block b1 with frame title text-001.
selection-screen skip.
PARAMETERS: p_ifile(128) TYPE c .
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: rad1 TYPE c RADIOBUTTON GROUP 1 USER-COMMAND gr1,
rad2 TYPE c RADIOBUTTON GROUP 1 .
SELECTION-SCREEN SKIP.
PARAMETERS: p_sess TYPE c.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK b1.
Subroutine call***************************
INCLUDE YNEW_MAIN_F01.
*include yasec_bdc_nik_session_f01.
*********At selection event triggered *************
at selection-screen on value-request for p_ifile.
To get F4 help for the input file path
PERFORM f_f4_input_file.
AT SELECTION-SCREEN ON p_ifile.
To validate and upload the input file
PERFORM f_load_file.
AT SELECTION-SCREEN ON p_sess.
To validate the Number of Sessions field
IF rad2 IS NOT INITIAL AND sy-ucomm EQ c_onli.
PERFORM f_check_sessions.
ENDIF.
***********Start of selection *******************
start-of-selection.
*To process BDC
PERFORM f_process_bdc.
TOP OF PAGE
TOP-OF-PAGE.
Writes the report heading and for displaying line number.
PERFORM f_report_header.
TYPES : BEGIN OF t_final,
matnr(50) TYPE c,
bismt(18) type c,
end of t_final.
TYPES: BEGIN OF t_fdata,
data(256) TYPE c,
END OF t_fdata.
TYPES: BEGIN OF t_error,
message(100) TYPE c,
END OF t_error.
*Internal table declarations
*Internal table to load the data from the file that is changed throgh BDC
DATA : i_final TYPE STANDARD TABLE OF t_final,
wa_final TYPE t_final.
*Internal table to store the error messages
DATA : i_error TYPE STANDARD TABLE OF t_error,
wa_error TYPE t_error.
*Internal table to load the raw data
DATA : i_fdata TYPE STANDARD TABLE OF t_fdata,
wa_fdata TYPE t_fdata.
*Internal table to store records of BDC
DATA : i_bdcdata TYPE STANDARD TABLE OF bdcdata INITIAL SIZE 0,
wa_bdcdata TYPE bdcdata.
Internal table to store BDC messages
DATA: i_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0,
wa_bdcmsgcoll TYPE bdcmsgcoll.
VARIABLE DECLARATIONS
DATA: v_ifile TYPE string,
v_input TYPE i,
c_delimiter TYPE c VALUE 'X',
v_mode TYPE c VALUE 'A',
v_sessions TYPE i.
CONSTANTS
CONSTANTS : c_flagx TYPE c VALUE 'X',
c_slash TYPE c VALUE '/',
c_onli(4) TYPE c VALUE 'ONLI',
c_vl02(4) TYPE c VALUE 'VL02',
c_s TYPE c VALUE 'A'.
FORM f_f4_input_file .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_ifile.
ENDFORM. " f_f4_input_file
*& Form f_load_file
FORM f_load_file .
v_ifile = p_ifile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_ifile
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_fdata
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
*Text-103-Input file does not exist.
MESSAGE e000 WITH text-103 .
ELSEIF NOT i_fdata IS INITIAL.
DELETE i_fdata WHERE data = space.
DESCRIBE TABLE i_fdata LINES v_input.
ENDIF.
IF v_input EQ 0.
Text-104 - Input file is empty.
MESSAGE e000 WITH text-104 .
ENDIF.
ENDFORM. " f_load_file
*& Form f_check_sessions
FORM f_check_sessions .
IF p_sess IS INITIAL.
MESSAGE e000 WITH text-106.
ELSE.
v_sessions = v_input DIV p_sess.
ENDIF.
ENDFORM. " f_check_sessions
*& Form f_process_bdc
text
FORM f_process_bdc.
LOOP AT i_fdata INTO wa_fdata.
SPLIT wa_fdata AT cl_abap_char_utilities=>horizontal_tab
INTO wa_final-matnr
wa_final-bismt.
APPEND wa_final TO i_final.
CLEAR wa_fdata.
ENDLOOP.
IF rad1 = c_flagx.
PERFORM f_passbdc_vl02.
ELSEIF rad2 = c_flagx.
PERFORM f_sessions_vl02.
ENDIF.
ENDFORM. "f_process_bdc
To populate the Screen information
p_program Program Name
p_dynpro Screen Number
FORM bdc_dynpro USING p_program TYPE any
p_dynpro TYPE any.
CLEAR wa_bdcdata.
Populate the BDC structure with the Screen Information.
Move the Program name PROGRAM
wa_bdcdata-program = p_program.
Move the Screen Number DYNPRO
wa_bdcdata-dynpro = p_dynpro.
Indicate the beginning of a new screen
wa_bdcdata-dynbegin = c_flagx.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_dynpro
*& Form f_passbdc_vl02
text
FORM f_passbdc_vl02.
DATA: l_lines_im TYPE i.
SORT i_final BY matnr ASCENDING.
CLEAR wa_final.
LOOP AT i_final INTO wa_final.
CLEAR: i_bdcmsgcoll[],
wa_bdcmsgcoll,
wa_bdcdata.
CLEAR: i_bdcdata[].
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
wa_final-matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARA-BISMT'.
perform bdc_field using 'MARA-BISMT'
wa_final-bismt.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM02'.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM03'.
CALL TRANSACTION 'MM02' USING i_bdcdata
MODE v_mode
UPDATE c_s
MESSAGES INTO i_bdcmsgcoll.
If error occurred in call transaction 'VA02' then stores all
information of failed records into internal table i_error_im.
IF sy-subrc NE 0.
DESCRIBE TABLE i_bdcmsgcoll LINES l_lines_im.
CLEAR wa_bdcmsgcoll.
READ TABLE i_bdcmsgcoll INTO wa_bdcmsgcoll INDEX l_lines_im.
To capture success and error messages in BDC.
CALL FUNCTION 'FORMAT_MESSAGE' "#EC *
EXPORTING
id = wa_bdcmsgcoll-msgid
lang = wa_bdcmsgcoll-msgspra
no = wa_bdcmsgcoll-msgnr
v1 = wa_bdcmsgcoll-msgv1
v2 = wa_bdcmsgcoll-msgv2
v3 = wa_bdcmsgcoll-msgv3
v4 = wa_bdcmsgcoll-msgv4
IMPORTING
msg = wa_error-message
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ELSE.
WRITE: text-111 COLOR 7.
ENDIF.
CLEAR: wa_final.
REFRESH i_bdcdata.
ENDLOOP.
ENDFORM. "f_passbdc_va02
*& Form bdc_field
text
-->P_FNAM text
-->P_FVAL text
FORM bdc_field USING p_fnam TYPE any
p_fval TYPE any.
CLEAR wa_bdcdata.
Populate the Field Name
wa_bdcdata-fnam = p_fnam.
Populate the field value
wa_bdcdata-fval = p_fval.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_field
*& Form f_sessions_vl02
text
FORM f_sessions_vl02 .
DATA: l_sindex TYPE sy-tabix VALUE 1,
l_eindex TYPE sy-tabix,
l_flag TYPE c VALUE space.
l_eindex = v_input.
SORT i_final BY matnr ASCENDING.
DO p_sess TIMES.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = 'Y_VL02_NIK'
user = sy-uname
keep = c_flagx
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR wa_final.
CLEAR: i_bdcdata[].
LOOP AT i_final INTO wa_final FROM l_sindex TO l_eindex .
IF l_flag = v_sessions.
CLEAR l_flag.
EXIT.
ENDIF.
l_flag = l_flag + 1.
CLEAR: i_bdcdata[].
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
wa_final-matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARA-BISMT'.
perform bdc_field using 'MARA-BISMT'
wa_final-bismt.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM02'.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM03'.
l_sindex = l_sindex + 1.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDDO.
ENDFORM. " f_sessions_vl02
*& Form f_report_header
FORM f_report_header .
FORMAT COLOR COL_HEADING INTENSIFIED ON.
ULINE.
text-201 - Company: Carrier
text-102- Batch Data Communication.
text-202 - System: SAP
WRITE: /1 sy-vline,
3 text-201,
50 text-102,
100 text-202,
AT sy-linsz sy-vline.
text-203 - Program:
text-204 - Date/Time:
WRITE: /1 sy-vline,
3 text-203, sy-repid ,
100 text-204,sy-datum ,c_slash, sy-uzeit,
AT sy-linsz sy-vline.
text-205 - User ID:
text-206 - Page:
WRITE: /1 sy-vline,
3 text-205, sy-uname,
100 text-206, sy-pagno,
AT sy-linsz sy-vline.
FORMAT COLOR OFF.
ULINE.
ENDFORM. " f_report_header
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = i_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE: / text-109 ,wa_final-matnr,
text-110 .
ENDIF.
ENDFORM. "bdc_transaction -
Selection in the master table is not getting reflected in the child table
<p> I have a 4 level master detail relationship.I have a bounded taskflow where I have a master in the first view.The child (The other two levels as a tree) in the second view.I move to second view when i click the command link(Each row has a command link) of the master table (present in the first view).</p>
<p>At the very first time when i try to insert a row in the child it's successful .I am able to see the same in the second view (The corresponding child of the master row which i have clicked).The 2 view is not refreshed i have panel strech layout in the 2 view which i am refreshing(PPR) on inserting the row. The master table is not refreshed as it is in the 1 view.I am not manipulating the master table but it was being set to the first row the second time .Added to that the 2 view doesn't have parent table .
</p>
Thanks,
Raj.Hi Frank,
I am using jdev 11.1.1.6 and integrated wls.
I have a single taskflow.I have a 4 level master detail.The vo's are connected through a view link . I have dropped the first level as a table . On selecting a row the corresponding children are displayed.The children are displayed as a tree. I have a tree context menu where i have inserted a row using popup . When the user clicks on the ok dialog i am commiting the data and refreshing the tree.
Now the problem is when i first create the row it's working properly . After when i try to create another row this time the currency of the first level is reset to the first row.
As suggested by you i have tried disabling the commit opertion . But the issue still occurs.
Thanks,
Raj
Edited by: RajaSekharReddy.M on Feb 26, 2013 6:03 PM -
Master data not present in the reporting cube
Dear Experts,
There is a scenario in report design for me.
I have already created the Bex report and all the fields as mentioned are in the sales report.
Client now wants to include two more fields in the report.
One is the keyfig " Net value" which is present in the sales cube and i have already included in the report
and another field which is master data 0profit_center is not present in the cube.
Any ideas how can i include this 0profit center data so that i can display in the report?
As far as i understand, I need to include this master data in the sales Infocube which is being used for reporting.
But i am pondering upon the impact on the system because of this.
Now i have checked the BI system and the ECC table. In VBRP table of ECC, the profit center is present.
But when i see in BI the profit center is not being loaded from ECC but from flat file source system.
So i am confused how to go forward.
Can anyone suggest me what should be my approach?
Best Regards!!You didn't understand what we suggested.
Rather than checking 0profit_ctr master data, you need to find the info objects(which are part of your cube) which have master data. in those 0profit_ctr can be a attribute. if yes then navigation settings will work.
if not then you can add 0profit_ctr to info cube and user master data look up thru routine or option read from master data(bw 7.3).
Other wise, directly add 0profit_ctr to your flat file data source(and cube) and maintain data thru flat file.
To look up your cube and 0pfirt_ctr need to have relations with another info objects other wise not possible. -
I recently started working on the Oracle SQL developer. I have 'select' privileges on the QA schema and when tried to execute proc in QA. It is giving the error as 'The file-based source <procedure Name> is not present in the database. Was it compiled?'
instead 'you do not have sufficient privileges to execute this procedure'. Did research on internet but with no luck.What configuration changes needed to be done to make it work.Guide me.Sounds like you do not have the correct privileges. What should have been granted to you by the QA user, or some other user with appropriate privileges, is...
grant EXECUTE on "QA"."<PROCEDURE_OF_INTEREST>" to "<YOUR_USERID>" ;
Note that a grant of execute on a procedure has nothing to do with grants of select on some or all of QA's tables and views.
So, as Vadim suggests, from your connection node in SQL Developer's Connections view, if you expand the Other Users node, then expand QA and look in the Procedures node, do you see the procedure of interest? If not, you cannot expect to be able to execute it from your userid's connection. And even if you do see it, you may have some other privilege that permits viewing but not executing, like...
The role SELECT_CATALOG_ROLE
The system privilege SELECT ANY DICTIONARY
And even if you do not see it there, then having certain other privileges granted to you could permit executing it in general, like...
The role EXECUTE_CATALOG_ROLE
The system privilege EXECUTE ANY PROCEDURE
Also, note that the 3.0 release is a bit dated nowadays. Upgrading to 4.0.3 production or even the 4.1 EA2 (early adopter) release will, in general, give you a better experience.
Best wishes,
Gary -
New entries in table TSTC not capturing in scu3 change logs
Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
KiranYou need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius -
How to pass column value which is not present in source criteria
Hi,
In one of my report I want to pass a column value from Source report(a pivot table) to target report. The column which I want to pass is not present in the sorce report criteria. Is there any work around for this issue.
I added this column in criteria and hidden the column. But the issue is not solved.
Best Regards,
TKB.Swati,
I am navigating from Summary report to detail report. I am prompting the required fields in detail report. But I want to pass one more column value explicitly, which is not present in source request.
Best Regards,
TKB. -
Continue if the source table does not exists
Hi
On the source side i have table called S1
On the target i have a table called T1
I need to merge records from source S1 into Target T1.
Issue is sometimes the Source S1 table would not be present and i dont want my mappings to fail but rather continue after handling this exception any ideas on how to achieve this in OWBWell, whats wrong if this mapping fails? It does not mean that other will not continue?
You could try with materialized view.
You could create custom procedure to check if the table is available and if not skip the mapping. -
Field in the table but not in the datasource
I have a datasource 0co_pc_act_05 based on mbew table . I need a field from that table , which is not present in the datasource , what should i do .?
How can i get the field from the table into the datasource?
Thankshi Mike,
try following steps
- in r/3 transaction rsa6 choose the datasource, click enhance strucutre, then append structure, system will propose z..., confirm it, in the next screen, type in the field name e.g abcd
- activate the append structure
- back to rsa6 choose the datasource, click edit, remove mark in column 'hidden' field for that field, save the datasource.
- in this case you no need to do user exit since that field exist in the origin table where the data extracted.
- recheck with rsa3
later in bw side
- create new infoobject, then right click the datasource and 'replicate datasource', change transfer rules, move the new field from right side to left (to be included in transfer structure), then assign the field by type in the new created infoobject name, activate the transfer rules. include also this new object in infocube etc.
hope this helps. -
JTA transaction is not present or the transaction is not in active state
Hi,
I am trying to execute an asynchronous bpel process. the bpel process has 5 OSB calls and is taking approximately 100 seconds for completion. The OSB calls in the BPEL are taking 90 seconds for completion. In the end of the BPEL process, after completion I get the following error:
[2010/07/22 01:56:44] BPEL process instance "1220007" completed
[2010/07/22 01:56:44] There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1,220,007". The reason is The execution of this instance "1220007" for process "BPELProcess1" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
We do not want to increase the transaction-timeout properties in the server in the Transaction-manager.xml or in the orion-ejb-jar.xml since we have other projects with synchronous processes running in the same server.
Can anybody please suggest a workaround to overcome this issue apart from increasing the transaction-timeout?Hi 783703,
As Sridhar suggested for your problem you have to set transaction-time out in j2ee/home/config/transaction-manager.xml.
If you use Idempotent as false for your partnerlinks, BPEL PM will store the status till that invoke(Proof that this invoke gets executed).
So better to go for increasing the time instead of going for idempotent as it has some side effects.
And coming to dehydration ....Ideally performance will be more if there are no much dehydration poitns in our process. But for some scenarios it is better to have dehydration(ex: we can know the status of the process...etc)
Dehydration store will not get cleared after completion of the process. Here dehydration means ....it will store these dtails in tables(like Cube_instance,cube_scope...etc).
Regards
PavanKumar.M
Maybe you are looking for
-
Upgrade DV 400 to USB 2?
Is it possible to upgrade a DV 400 imac to USB 2? It would help a lot with peripherals particularly the new ipods!! Thanks
-
[SOLVED]google earth - black layout menu
I have installed google earth, everything runs, just menu layout is in black color - menu is readable.. what should be white in menu layout is black and font is grey nvidia binary installed Last edited by xhc (2012-06-24 12:09:38)
-
Hi, I am trying to bind LDAP with OBIEE 11G. I am using following Rittman Blog http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-security-integration-with-microsoft-active-directory/ whenever i click USERs and GROUPs it takes a hell of time(more th
-
Since Forms Central will no longer be available, does anyone know if there any other web form designers out there similar to this one?
-
Increase and decrease a numerical text layer over time
I need to create a text layer with a numerical value that will range from 0% to 100% over time using key frames. I need the value to change over time, increasing or decreasing the percentage based on key frames. Any ideas? Thank you!