CCM Shopping from Catalogue

Dear All,
We are able to upload products in master catalogue, and then we have mapped the content to the master and procurement catalogue and published both them.
Once we try to go shopping, the following messages appears,
-for the procurement catalogue:
Bad Gateway
The following error occurred:
[code=DNS_HOST_NOT_FOUND] The host name was not found during the DNS lookup. Contact your system administrator if the problem is not found by retrying the URL
-for the master catalogue
Appears again the screen where you select the catalogue from where you want to shop.
I think I have done the appropriate setting in SRM-server and I have also defined the External web services, but I dont know what Im doing wrong or what Im missing to do.
We are using SRM 5.0 and CCM 2.0
Kind Regards,
Jaume (if you have to send any file; [email protected])

Try using the IP in the URL (I seem to remember seeing a note re this problem).
Also could you confirm. The URL for the catalog can this be called independantly from the SRM application.
URL should be along like the below....
http://sapdev.mycompany:8000/sap/bc/bsp/ccm/srm_cse/main.do
The web page should display the wording
"Your session has timed out - call up SAP Catalog Search Engine again in SRM "

Similar Messages

Import from catalogue failure

when i try to import from catalogue, the files i want to import are grayed out. How comes and how to fix this?

I got this errror on Windows 7 x64 when trying to import from a catalog. Turns out that I didn't have enough space on the hard disk where my temp folder was located. When I made more room, it was able to import the catalog.

Cannot move photo from catalogue to all pictures in "home" location

I have adobe starter edition 3, windows xp. Computer is Dell 2400 (IBM), printer is PIXMA MP530. I have some pictures on fotki that I want to place in the "home" part of ADOBE, where all of my pictures can be seen. I am able to download to desktop. It seems as if I click on the ADOBE picture album folder, the photo would replace the picture album folder. When I download to the desktop, the photo is placed in the catalogue. When I try to place it in the home location, a "cannot place in location: picture already in catalgoue" message. I cannot see the photo unless I type in the file name and search using "find". I would like to be able to see this photo in the home folder. There are too many photos that need to be downloaded (a computer accident destroyed some photos, but I can download the original photo from fotki).
How can I place the photos in the "home" loaction?
Please reply to [email protected] Thank you.

Dear Jim Jutte, Thank you for your reply. My answers are interspersed in your anwer to mee ----- Original Message ----- From: "Jim Jütte" <[email protected]> To: <[email protected]> Sent: Wednesday, May 07, 2008 8:38 PM Subject: Re: cannot move photo from catalogue to all pictures in "home" location >A new message was posted by Jim Jütte in > > Photoshop Album Starter Edition -- > cannot move photo from catalogue to all pictures in "home" location > > Hi Laura, > > I'm not sure I'm following. This could be a question of terms that we are > using differently. > > Maybe it would help if I explained what PSA SE does. > > It is just a catalog with a minor editor. Essentially, it records the > location of the image and shows you a thumbnail of what is there. If you > make changes to this image it does not change the original, it makes a > copy of it and changes ONLY the copy. > > It also does not move the image. If you move the image, you have to do so > manually and update the location by the "reconnect" function. > I have not been able to use the reconnect function, because the original files were destroyed in a computer accident. When I try to download to my pictures inside the my documents folder, it does not happen. When I changed how I tried to locate the files downloaded to desktop, for the first time, I tried "by folder location", I found the files in an adobe format under desktop. I do not seem to be able to download the photos to any other location than desktop; when I try to move them to another folder, this does not seem possible. I find that no matter what, once I try to move the photo from the desktop to another location, I cannot get the home page to show this in the overall screen, because a "file already exists in catalogue" message. ... I did manage to download to desktop and then copy to another location two photos. They show up when I view them according to folder, but do not appear in ADOBE when the photos are arranged by date. To download, I went to FOTKI, right clicked on the photo, and then saved them in DIGITAL CAMERA PHOTOS. > It is best to probably not put images on the desktop, rather put them in > My Pictures inside the My Documents folder. Your desktop will quickly get > cluttered otherwise... unless of course you have a folder there. > > Now we need to determine a little more of what exactly you are doing. > > Can you take me through step by step what you are doing and maybe I can > guide you through. And no, I'm not an Adobe employee, just the moderator > and I like to help. > > Cheers Thanks in advance for your help, Laura > >

I happened to switch shop from Se to Uk. How do I switch back ?

I happened to switch shop from Se to Uk. How do I switch back ?

Read here:
http://support.apple.com/kb/HT1311

CCMS alrets from ABAP

Hi All,
Can we able to raise CCMS alret from ABAP program . My requirement is when ever error occurs in the program it should raise the alret message through CCMS . Is it possible ?
Regards
Srihari

Hey SriHari,
I have a similar requirement, can you please let me know how you solved it...

How do you transfer Creative Cloud (Light Room & Photo Shop) from your old Desk top to a new desk top

I have just got a new desk top and I am trying to work out how to get The creative Cloud programs I use (light Room and Photo Shop) off my old Desk top and onto the new desktop. Does any one know how to do this or have already done it, or do you have to cancel the subscription on the old PC and start a new subscription for the new PC.

Hi Jessica,
You do not need to cancel the subscription. You can simply follow the article: Creative Cloud Help | Download, install, update, or uninstall apps which will help you to install the Adobe CC application on your new PC.
If possible you can also deactivate the license from your previous computer using the article: Activation & Deactivation Help.
Let me know if it works or not.
Thanks,
Ratandeep Arora

Wrong vendor selection while shopping from vendors catalog

Hi,
Shopping cart has been created visiting vendors catalog but system created shopping cart on wrong vendor. This issue is not frequent but need to analysis/fix.
For example, selected the items in Dell catalog but in shopping cart the vendor is CDW.
Will appreciate your help if any one have faced such issue. We are on SRM 7.0.
Thanks
Jayashree.

Hi Jayashree,
Please check the supplier number under : Strategic Purchasing --> Business partner in purchaser log in for which you want to create the SC from catalog and assign that number of supplier to catalog item in data manager.
this will solve your issue.
Thanks
Ravi

Error while shopping from catalog

Experts,
We are on SRM7/ECC6 (Ext classic)
When we are creating a shopping cart from one of the vendor catalogs, we are getting following errors
1. Unit of measure BOX is not an ISO code (I don't get this when i create a free text SC with unit of measure as BOX!!)
2. Error occured calling META_BAPI_DISPATCH (I don't get this error while shopping otherwise, but only when I shop via catalogs)
3. Not possible to calculate tax (I don't get this error while shopping otherwise, but only when I shop via catalogs)
4. Plant for follow on document missing (I don't get this error while shopping otherwise, but only when I shop via catalogs)
5. System ECCXXXX of purchasing org XXX differs from doc reference SRMXXX
Please advise as to why so many errors while catalog shopping but no error otherwise?
Regards

Not possible to calculate tax
-> Generally one gets this error when one do/don't setup tax. Please check tax configuration.
SRM Server -> Cross-Application Basic Settings-> Tax Calculation -> Determine System for Tax Calculation -> No tax calculation.
System ECCXXXX of purchasing org XXX differs from doc reference SRMXXX
-> There has to be mis-match between ECC pur org & SRM pur org. You need to consult MM con & rectify it.
Regards,
yaniVy
reward if helps

CCM 2.0 Catalogue Extract

Hi,
I would need to get an extract of the Supplier Catalog and Procurement Catalog.
I know that pressing the button Export Schema in the CAT I can get just the schema of the catalog, but not the content part. Is there any possibility to get an extract of the whole catalog (schema+content)? I am thinking that may be there is a table that I can access via SAPGui?
Thanks in advanced!!
Best Regards!!

Hi Patricia,
AFAIK there's no possibility to export articles neither in the CAT nor over the GUI. Maybe it is possible to exctract it directly from the tables. But I don't know the exact tables that fit to your needs.
Take a look at the posting Catalog tables and CCM?
This could help.
Good luck
Lars

How to generate CCMS report from ECC system

Hi,
I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Regards,
Pradeep J

Pradip_jag12 wrote:
> I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
>Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Hi,
Contradicting statements.
However check the link for CCMS Configuration:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Ideally the CEN system should be a double stack i.e. best if its a solution manager.
Regards,
Srikishan

E-commerce shopadmin - moving shop from dev to Consolidation

hello there,
We are using E-Commerce on ECC 6.0.
I have done a download from development of the XCM b2b config and XCM shopadmin config.
I have uploaded the b2b and shopadmin config into the consolidation system.
When we go to the URL http://<server>:<port>/shopadmin/shopadmin/init.do we did not get all the shops that were in development.
How do we move the Shop managament information between systems? When I do the search shops it does not show any shops. In development I have 10 shops with different shop ids. where we setup the General Information, Catalog, Transactions and Customers with different Business Scenarios.
Thanks for your assistance.
Deidre Logan

I do not think so because the configuration and application data are displaying properly in the XCM for the B2B and Shop admin.
I am think that the Shops are either setup in each system - which would not be nice.
Or they are actually transported on the ABAP side of the system even though they are created on the java stack. The Shop Management appears to be a web dynpro application.
I just do not know what the CRM folk consider the movement of these objects. In the ABAP side it is a transport or promote to production.
I am not sure the terms in CRM. It seems to be a little different than the other SAP apps.
Any help would greatly be appreciated.
How to move these shops between systems Dev to Consolidation to production......
thanks,

Upon Import Of New Photos Old Photos Disappear From Catalogue

I have Lightroom 2. I created a catalogue and imported photo's into it from my computer. I then went to import more photo's to the same catalogue and I cannot find the previous imports photo's. I tried to reimport the originals and Lightroom told me I am trying to import duplicates even though I cannot see the photo's in the catalogue. I tried looking at the filters and it only shows the photo's form the new import, clicking 'previous import' also does not yield any results. Any suggestions ?

Try clicking on "All Photographs" in the Catalog section on the left-hand panel.
Hal

Confused Metadata after import from catalogue

I have two catalogues on this machine. I just imported one into the other in order to merge them. The images in each catalogue have never been in the other.
After the import, most, but not I think all, imported images have an icon either saying either:
The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
or
The metadata for this photo has been changed by another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
My confusion is because I can't see how either of these statements can be true for most of the photos, which have either lived in one or the other LR catalogue all their lives. Unless by "another application" it is just referring to another instance of LR in the past?
I also don't understand whether "overwrite settings ... with those from the catalog" means using the metadata in the current catalogue, which came from the old catalogue (and which I therefore want), or whether it means overwrite the images embedded metadata with the (blank) metadata in the new catalogue after importing.
Assuming Metadata really means literally that, and not Keywords or presence in Collections etc, then it's no biggy, as I don't use Metadata very much. But still, can someone guide me through the safest option for the 6000 imported photos?
thanks
Nic
Amateur user, LR3.6, Mac OSX 10.6.8

Ian-
After reading your post, I did some reading, and now I get how to us LR's Paint tool!
With only your jpeg selected in the Library module, go to grid mode displaying the other images you want to copy the keywords to. Select the Paint tool in the tool strip, and If you don't see it, select Metadata>Enable painting.
On the right-hand panel, there is a Keywording text box with a comma-delimited list of keywords in the selected jpeg. Use your pointer to select all the list, then copy.
Make sure the paint tool is set for Keywords, then click in the dim little text box next to the Paint: Keywords selection labels. It should turn white: copy the list into that text box.
Now, click on each picture in the grid you want the list applied to and it happens! A message comes up. The spray paint icon changes to an eraser, so if you want to remove the keywords from an image, just click it.
Pretty cool tool!
Tony

Consult Transfer problem after CCM upgrade from 3.3.4 to 4.1.3

I upgraded a CCM Cluster installed into a main site. In addition there is a branch office WAN connected by an MPLS Link with the main site; the branch is connected to PSTN using a Voice Gateway H323. The upgrade was perfomed from 3.3.4.sr2 to 4.1.3sr3a.
Now there are problems with consult transfer only on the branch office; main site don't is affected by the problem.
It's really strange because it occurs for 50% of the time, sometimes it works fine ..
To better explain the problem:
when a user receive a call from PSTN or from another phone (into same region or remote) and want to transfer to another collegue he press "transfer softkey", talk with the collegue and when he try to transfer the call "transfer softkey" appear disabled. If he transfer the call without consult the call is transferred correctly.
Later I have unistalled the 4.1.3 sr3a and installed 4.1.3 sr2 but nothing is changed
Someone can help me ?

Hi Brent,
Do you perhaps have "on hook" transfer enabled? With this enabled you don't need to press the Transfer key a second time to complete the transfer.Have a look:
When on-hook transfer is enabled, you can either hang up or press Trnsfer, then hang up.
If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing Trnsfer cancels the transfer action and places the party to be transferred on hold.
Onhook Call Transfer
Modifications to the Call Transfer feature add the onhook (hangup) action as a possible last step to complete a call transfer. The Transfer On-hook Enabled service parameter, which enables onhook call transfer, must be set to True for onhook call transfer to succeed. If the service parameter is set to False, the onhook action ends the secondary call to the third party.
In the existing implementation, if user B has an active call on a particular line (from user A) and user B has not reached the maximum number of calls on this line, the Cisco IP Phone provides a Transfer softkey to user B. If user B presses the Transfer softkey (or Transfer button, if available) once, user B receives dial tone and can make a secondary call: user B dials the number of a third party (user C). Cisco CallManager provides a Transfer softkey to user B again. If user B presses the Transfer softkey again (or Transfer button, if available), the transfer operation completes.
With the new onhook call transfer implementation, user B can hang up after dialing user C's number, and the transfer completes. Both the existing and new implementations work in both the case of a blind transfer (user B disconnects before user C answers) and also in the case of a consult transfer (user B waits for user C to answer and announces the call from user A).
The previous implementation remains unchanged: user B can press the Transfer softkey twice to complete the transfer.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edb46.html#wp1088627
Hope this helps!
Rob
Please remember to rate helpful posts...........

Why ask me to select Language firstly while entering CCM catalog from EBP

Dear SRM Gurus
     when I make a shopping cart, I select product from Catalog , but firstly , I have to select Language, I can see the content.    how to directly entering the content not selecting Language . how to set the default language?
thanks
best regards
Jesse.

in Spro, I try to set so about Language:
SAP-LANGUAGE     SY-LANGU ;
LOCAL    SY-LANGU ;
or
SAP-LANGUAGE     ZH;
LOCAL    ZH;
But, the symptom isn't still changed.
why?

CCM Shopping from Catalogue

Similar Messages

Maybe you are looking for