CCX editor 10.5 reactive debugger not reading correct file

Hello,
We recently upgraded to 10.5 and now the debugger will not work as did before. I will pick a file and it loads it but its not correct. Its showing an old version and I can't seem to change it. Does anyone know where I can update this? It used to work great now not so much.
Thanks
Laura

Hi Laura
This usually happens if you edit the scripts and either:
- upload via web browser to UCCX, but do not 'refresh' the script and application when prompted
- save direct to the repository within the CCX Editor
If you do either of these, the script goes into the CCX DB, but is not refreshed into the file system where the scripts run from on each server. You need to go into the script management page, refresh the script, then go into application management and refresh the application.
Regards
Aaron

Similar Messages

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Adobe 11 will not read my files.

I have downloaded Adobe 11 several times, with and without the anti-virus set, and though it recognises my files Microsoft reports it had 'encountered a problem and is closing it down' when I try to open them. When I restore the system to Adobe 9 it opens my old files but, obviously, not those in '11' format. Any ideas?

Well, it's like this. Someone sends me some printed information. A bill.
A report , It downloads. I try to open it and it tells me I need Adobe
Reader 11 to do so and gives me a link. . I download from the link. It
takes an age but in the end it tells me I have successfully downloaded Adobe
Reader 11. When I try to open the file Microsoft tells me they have
encountered a problem and are closing it down. When I try to open any of my
saved Adobe Reader files I then get the same message. I have to use System
Restore to get the facility of Adobe Reader 9 back. Then it opens my saved
files again.
In a message dated 04/11/2012 02:36:32 GMT Standard Time,
[email protected] writes:
Re: Adobe 11 will not read my files.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4821557#4821557)

Illustrator files cannot be opened: Could not read the file because an error has occurred.

I cannot open some files from Illustrator which contain PNG files placed. When I try to open the file, I get a message saying: "this png contains addtional data for Adobe fireworks, which will be discarded upon save." When I press "ok" I get the same screen again. When I press "cancel" I get: "coulld not read the file because an error has occured". I am currently working on a Mac Mavericks. Using Illustrator cc and Fireworks CS6.

Eliana,
If you have some file corruption, one thing often tried first is to create a new document and File>Place the (PDF contents, if any of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

Adobe Reader will not read pdf files on internet

I have lastest version of Adobe reader on a new mac running OS 10 Maverick. This has latest safari (7.0.1) as my internet browser. My adobe reader reads pdf files already present on my desktop, but will not read pdf files from the internet even after I allow "trust" this site. Can anyone help me to resolve the issue please. Is it a bug that Adobe has not solved??

Sorry if you did not understand my instructions.
Regarding bullet point 4: Check Reader >Preferences > Internet > Web Browser Options> The blessed app should be " /Applications/Adobe Reader.app"
You specified that you don't see the path, then it might be some problem in your installation.
Please see the attached image and let me know what you see on your system.
Regarding bullet point 5: Load PDF in Safari.
This means open any PDFs in Safari web browser.
Please make sure the below highlighted plug-ins are installed on your system by going to the specified path. And make sure the version of the below two plug-ins are 11.0.06. You can find the version by selecting the plugin and hit Command+i.
Go to your Main Hard Disk/Library/ Internet Plug-Ins/ AdobePDFViewerNPAPI.plugin
Go to your Main Hard Disk/Library/ Internet Plug-Ins/ AdobePDFViewer.plugin
Please let me know if these help.
Thank You

Why my device not read pdf-files in mail messages?

Qq
why my Nokia device not read pdf-file on mail message?

What is the operating system on that device?
Do you have Adobe Reader installed?
What exactly means "not read"?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

"could not read the file because the plug-in could not understand the file."

"could not read the file because the plug-in could not understand the file."
I keep getting this error when trying to open some of my illustrator files. Usually after trying 5 or 6 time it will mysteriously open without a problem. I've reinstalled Illustrator and that didn't work. I've uninstalled and reinstalled CS3 and that didn't work.
Why does it sometimes open and sometimes not???
I've lost I don't know how many hours screwing around with this and REALLY pissing me off!!!
AURGH!

I think this has something to do with the PNG plugin.

Small size file can not read correctly on other linux

Hi, I am running archlinux 0.8 on my laptop, and there is another linux runs kernel version 2.6.20 with root filesystem of debian v3.1.
I wrote a shell script which reads a small, 49 bytes, only 1 line conf file on my archlinux, it works fine.
But if I copy script & conf files to debian, the script can not read conf file with:
while read f;do; echo $f; done < conf
but `cat`,`more` commands can read it. I have to open conf file with vi on debian and do nothing but :wq rewrite it to make script working.
Both arch & debian use ext3 file system. Could anyone tell me why? thanks.

I think your command is wrong: it works with zsh and doesn`t work in bash. Maybe you should remove extra ';'?
while read f;do echo $f; done < conf

Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

CS3 not reading xmp files generated in CS2.

CS3 is not reading xmp files generated in CS2.
If I open a raw file that was adjusted in ACR in PSCS2 with PSCS3 it does not recognize the adjustments that were made to the file.
PSCS3 opens the file in ACR with the default settings and I lose all of the adjustments and crops.
Is anyone else having this problem. If so: is their a fix or a stting I should use?

First. make sure you have updated to Bridge 2.1.0.100.
2nd, Purge the Cache from the TOOLS menu in Bridge.
3rd, Delete and rebuild your Bridge preferences by holding down the Option key (Command+Option, or Command+Option+Shift work as well) immediately after launching the application.
4th, if that doesn't work, make a fresh, new Mac account and log in as a different user.
Then report back.

My program does not read raw files from mark III

My program does not read raw files from mark III

emac77,
Support for Canon 5D MIII RAW files was announced in ACR 7.1 (Adobe Camera Raw 7.1).
The current stable release is ACR 7.2 while ACR 7.3 is still a Release Candidate (Beta).
Starting ACR 7.2, Adobe stopped supplying a manual download link which was available till 7.1. Adobe Application Manager (AAM) is the only way for you to update to ACR 7.2.
However, here is a direct download link that AAM connects to for the download that you can use to grab the .zip or .dmg (Mac) file. Download and install. See if you're able to open your files then.
ACR 7.2 for Windows: http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
ACR 7.2 for Mac: http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
-ST

My iTunes can not read a file, because its created by a newer

My iTunes can not read a file, because it's created by a newer!!!
The file is: iTunes Library.itl
I hope you can help me!!
Bye tokiodrift

You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2

CCX editor 10.5 reactive debugger not reading correct file

Similar Messages

Maybe you are looking for