CD/DVD does not play audio CD,it does play DVD and in rare ocasions it plays the audio CD but mainly if the computer is just turn on,any help will be very usefull,THANKS in advance it's a PowerBook G4
PowerBook G4
Problem with CD/DVD doesn't play audio CD but it does play DVD, and today it play audio CD but after ejected it did not play it again and ejected automatic.
Any help grately apreciated Thanks in advance.
Hello,
Sounds to me like there is a problem with the optical drive. I would recommend replacing it.
Have you tried to cleaning it?
Similar Messages
-
I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.
Both need to be in the lobby, and searchable at the same time. Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.
-
In the old version of Firefox I could save all my open tabs when I shutdown Firefox but now with the new version it does not give me that option to save the tabs before closing Firefox.
You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
* browser.showQuitWarning (Firefox 4 only) -
Downloaded iSO 7.0.2 and now I'm not receiving replies to my text messages. I've tested it with someone standing next to me, their phone shows their reply sent and my phone gets nothing. Does anyone know what I can do to fix this? Thanks in advance
Try the following:
Go to Settings > Messages > iMessages > disable
Go to Settings > General > Reset > Reset Network Settings
let it do it's thing and reset.
Then go to Settings > Messages > iMessages > enable
You'll then have to go back to your Wifi and re-enter your router credentials. -
Can anyone help me, I have an unlock code off vodafone to change networks. And I'm stuck in what to do now I have the code. If anyone can help it will be much appreciated. Thanks Kelly.
Unlock 'codes' are not provided for unlocking iPhones. Whatever they have given you is useless.
Once Vodafone have confirmed your iPhone is unlocked, you connect it to iTunes on your computer for the actual unlocking to take place. iTunes will show a Congratulations message on screen when the unlock is done.
No codes are required. -
My ipad mini is showing nothing when i open the updates tab on appstore whereas it continously shows three updates available on homescreen.
There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them. -
i have lost all my notes saved on my iphone after syncing it. and my default mailbox is gmail. notes were very important. and now i dont know how to get them back. can anyone help me out please? thanks in advance.
Try this ..
On your Mac open System Preferences > iCloud
Deselect the box next to: Notes
Then reselect it.
Give iCloud a few minutes to re sync the data.
Other than that, try Time Machine > http://pondini.org/TM/15m.html -
Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?
Restore as New (no backup)... then Re-Sync your Content.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
I want remove some dark spots on a hand and color it flesh color. I'm very new to Lightroom, can anyone help me with this? Thanks in advance for any help!
Have you tried the Spot Removal tool (press Q key)?
New to Lightroom? Go here: Getting Started with Lightroom CC - YouTube
Spot removal: Lightroom CC - Removing Dust Spots and Imperfections - YouTube -
My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
Sounds like a repair issue, which is not easy to do in India :( -
Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil -
in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
Windows Web Server W2k8R2sp1 Problem
Eventlog service does not start
- Cause: Java Web Start does not start
-- Cause: Had a virus in "C:\Program Files (x86)\Java\jre1.6.0_03\bin\javaws.exe"
(AVG removed file. Re-installed java in: S:\Java\re1.8.0_31
In registry: file-paths seem to be okay (regedit find: javaws, Java Web Start)
Can't find a solution on-line.
What to do?
It is a dedicated production server managed by remote desktop (Leaseweb.com, ip: [37.48.64.130])
Any help will be highly appreciated.
Thanx in advance,
DickHi Vivian,
Rebooted several times
The point is the event-viewer is not working. Because the eventlog-process is not running/starting. Because JavaWS-process isn't starting
Registry: http://niceware.com/zen/All_registry_20015-03-25_reg.txt
Processes: http://niceware.com/zen/services-2015-03-25_csv.txt
This is some info by SC.EXE:
=========================
CMD in elevated mode:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sc queryex eventlog
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 1068 (0x42c)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc queryex javaws
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
C:\Windows\system32>sc start javaws
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
========
C:\Windows\system32>sc start eventlog
[SC] StartService FAILED 1068:
The dependency service or group failed to start.
========
C:\Windows\system32>sc qc javaws
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: javaws
TYPE : 10 WIN32_OWN_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 0 IGNORE
BINARY_PATH_NAME : S:\Java\re1.8.0_31\bin\javaws.exe
LOAD_ORDER_GROUP :
TAG : 0
DISPLAY_NAME : Java Web Start
DEPENDENCIES :
SERVICE_START_NAME : LocalSystem
C:\Windows\system32>sc qc eventlog
[SC] QueryServiceConfig SUCCESS
SERVICE_NAME: eventlog
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
LOAD_ORDER_GROUP : Event Log
TAG : 0
DISPLAY_NAME : Windows Event Log
DEPENDENCIES : javaws
SERVICE_START_NAME : NT AUTHORITY\LocalService
C:\Windows\system32> -
After uodating Phtoshop yesterday, it does not work anymore. Program does not respomd
Thanks for your help! I tried your suggestion but only switched off the firewall (although just swichting-off of the firewall may not help). This did not solve the problem.
But! I was able to solve it! A friend came up with the idea. It was a profile problem. Somehow, the profile information must be damaged (and he explained me, that this ocures sometimes when updating from firefox 3 to 5). I dont know what is going on there. However, after creating a new profile everything was alright and firefox 5 works now!
If firefox does not open and you want to create a new profile:
-right click on the firefox icon
-properties
-shortcuts
-check if the "target" is correct (the exe.file is at this place on your machine)
-if yes: add after the target: [space]-p
-apply and ok
-now start firefox, this will open the profile manager
-create a new profile
-apply
-open firefox again and it will work (at least in may case).
Hope this is a help for all who have the same problem. I am very happy now and looking forward to enjoy firefox 5.
Thanks a lot! And good luck for everybody trying to solve computer problems!
Maybe you are looking for
-
Datafile recovery from corrupted hard disk
Hi Guys, Im using oracle 8i 8174 on windows 2000 server. Suddenly out of four hard disks one of them corrupted. No RAID configuration. This disk is F: drive partition only and having a datafile. Windows 2000 server is working fine , but database is n
-
Most efficient way to make an ordered list?
Hi all, I have a simulation where I have agents running around in an environment. These agents need to get the closest agent near them, and they have to do this a whole bunch of times each cycle -- closest predator to them, closest prey, closest mate
-
[SOLVED]Lose Conky window shadows...
I have Xfce set to display shadows under windows, which looks great until I run Conky. Any tips on how I can get rid of Conky's shadow and keep the rest? Last edited by crisnoh (2008-05-04 20:16:06)
-
Hi hussein, OS RHEL 4.6 EBS R12 We have installed 32bit EBS R12 to our three (3) clients using 32bit linux OS , and they are running fine now. These clients usually have less that 100 users bacause they are just small section (accounting) of the comp
-
"Security error accessing url" - Accessing HTTP service running on another machine
Flex app is hosted as web service and is trying t access data from HTTP Service running on different machine. It throws following error [RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: