CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated  

This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

Similar Messages

  • CD/DVD Drive is not reading any discs on Equium A100

    My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
    Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
    Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

    Hello,
    Here are a few windows articles that could help.
    http://support.microsoft.com/kb/891894/en-us
    This one might do the trick, if not try this one.
    http://support.microsoft.com/kb/826510/en-us
    Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

  • HT2801 My DVD drive is not reading any DVD

    My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

    Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

  • Hi, My dvd drive ad7586h doesnt read any discs, though diagnostic​s report fine functional​ity.plsHEL​P

    1. HP probook 6550b
    2. Win 7 Pro 64 Bit (original since bought)
    3.DVD drive ad7586h doesnt read any discs, but device manager and HP support assistant report this device to be wortking properly..
    4. not aware of any..

    Hi,
    Please try this:
       http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Equium A60 - DVD drive does not read data discs

    Hello
    I am having a problem with my DVD drive on my Toshiba Equium A60 laptop. The DVD drive (Pioneer DVD-RW DVR-K13A ) will play shop bought films etc without a problem. it will also read a blank DVD when you put it in the drive but once information/Data is on the disc it wont detect the disc.
    I am not really that good with computer so any help would be most grateful. The computer used to play everything it just stopped doing it a few months back.
    Many thanks Phil

    The issue is clear.
    Fact is that not all CDs and DVDs are supported and compatible. There could be always an issue with a reading or writing
    The same happened to me too I had to test different CDs and DVDs from different manufacturers and finally some medias worked
    In your user manual you should find a list of medias which were tested and should run properly check it!
    bye

  • My ENVY 17 3D's Bluray drive does not read any disc.

    I got a refurbished ENVY 17 3D (i7 740Q) and having a bluray drive issue.
    When I insert a disc in to the drive it keeps spitting the disc out after a few seconds. And I can't hear any motor spinning sound. It's weird, I mean at least it should be reading the disc then spit it out, on the other hand it do exist in my SYSTEM. I didn't have a single burning CD software installed but I did install an iTunes. Should I return it to HP?

    Anyone has solution to this, before I decided to send it to HP for repair?
    I tried the Optical Drive Diagnostic using HP support assistant, but since the drive keep ejecting the media (CD/DVD/BR) for testing, I can't complete the diagnostic. I uninstalled and reinstalled with the latest drive update, still the same problem, even with the latest BIOS update.
    I even went with a complete system recovery reboot and still can't solve the problem. The BR drive worked fine since it's recognized by the system, and Windows does not show any error. So why does it keep ejecting the CD/DVD/BR?
    This happened out of the blue btw, so I have no clue what caused the problem. It was working fine like moments ago.

  • Equium P200 - DVD drive does not read all discs

    My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
    Does anyone know what the problem is?

    Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
    Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
    bye

  • DVD drive does not read SOME discs

    Hello there,
    My DVD drive had been working fine for the last 2 years, but now it sometimes simply won't read some film DVDs. The problem is not related to the DVD area thing. What happens is that I put the disc in the drive, it spends a long time spinning the disc around, and then nothing happens: explorer just shows as if there was no disc in the drive.
    My laptop is a HP Compaq 6715s. My system is Windows XP SP3. My drive lists as a HL-DT-ST DVDRAM GSA-T20L. (For some reason, although I only have one physical drive, another device is listed in the Device Manager just underneath the GSA-T20L: a TSHAJWP XAZ0TU7SPEF SCSI CdRom. But I believe this is a virtual drive created by Deamon emulator?).
    All hints and help would be greatly appreciated!
    Best,
    Pedro

    Also, I forgot to say that I have tested the films that don't work in my machine elsewhere, so I am certain the problem is not in the discs themselves.

  • Drive is not reading any discs on my Satellite A100-192

    Hi,
    today i wanted to watch a dvd movie, i've inserted the disc into the drive and waited for an autostart to play...nut nothing happened.
    Drive LED is on all the time and i can't access the drive in windows. I've tried with several original dvd discs and one blank cd /i've got nothing else in here/.
    What could cause this problem?
    I've tried it in Windows XP and Vista Beta 2 :/
    Best regards,
    Krystian

    Hi
    One question: Did you use the Toshiba recovery CD? If not, please check if this issue appears on the Toshiba image.
    If you dont get any auto start messages after DVD inserting into the drive so I would firstly check the settings.
    Please make a right click on to the drive icon. Then please select the AutoPlay tab.
    There you can choose the dvd movie and select an action. Otherwise you can enable the option prompt me each time to choose an action
    If this doesnt help so you can also try to remove the drive from the device manager. After this procedure please reboot the unit. The OS should recognize the drive again. Then try to play DVDs again

  • CD/DVD Drive will Not read CD/DVDs

    This desktop is only about 3 months old and so far has worked great!! But since last week for some reason the CD/DVD Drive will not read any disc. The tray will open but then nothing happens at all once a CD/DVD is in. Doesn't even sound like it is spinning. Any ideas?? Please help!! Thanks!!

    Also it is running Windows 8 and is a Ideacentre K410. And the CD/DVD Drive it is showing I have installed is TSSTCorpDVD-RW SH-216BB Not sure if that has always been the drive or not.

  • Equium A110-233 drive not reading any discs - error code 39

    Drive not reading any discs.
    Something to do with driver. As far as i can tell it says code 39 error.

    Hi
    Please try the first method:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;320553
    There you will find a link to the MS website which provides a nice solution.

  • My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

    My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

    The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
    If not, it will have to be replace.
    Allan

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • Still no fix for superdrive not reading any disc at all?

    I've searched through the forum and it seems like there's still no solution for the superdrive not reading any sort disc at all. I have had this imac for almost a month. I rarely have used the superdrive but was trying to play a normal audio cd tonight and upon further investigation found that the drive is not reading any type of disc.
    If a disc is loaded, the drive whirs/beeps 4-5 times while trying to read the disc and then ejects it. this happens for dvd movies, audio cds, osx install disc, etc.
    I did successfully play and rip some cds a few weeks ago when the imac was first purchased. I have not inserted discs often enough in the past to substantiate that upgrading to 10.4.5 or 10.4.6 affected the drive's performance.
    Think I need a new drive or could this be software related?
    imac intel core duo 17"   Mac OS X (10.4.6)  

    I want "solved"
    You can add me to the list too - I check this page frequently for a reply from an apple representative - to no avail.
    My computer is less than 2 years old, purchased brand spankin' new, w/o the warrantee - but hey when you pay that much for your 'puter it should not break down at ANY time during (at least) the first 5 years, unless gross negligence and disregard is involved (which is is not).
    I would not categorize myself as being in the 'high usage' category for burning either dvd's or cd's, but here I am less than 2 yrs after purchase w/ a superdrive that can't even read a store-bought cd, and oddly enough the problems I am having DO seem to coincide w/ download of a 'security update.'
    Hmmmm......
    I would like, at the very least, a helpful suggestion from someone working for Apple - if not an acknowledgement of an actual issue with a faulty (expensive) product.
    A guarantee of satisfaction with a purchase should not be wrapped up in purchase of a service plan - good customer service is good policy, and should be provided as a means of standing behind the quality of a product you both sell, and believe in.
    There is no good reason why my computer should be broken, and there is no good reason why it shouldn't be fixed - and I see a lot of you have even more reason for complaint than I do. It is irksome in the extreme that this issue seems not to warrant the attention from anyone who can make a difference to our plight.
    One would think that a drop-down menu on an official web-site would have a better response rate from affiliated 'professionals' - but we all know the old adage about assuming...
    Hey - maybe customer service really is dead - and I might believe that if it weren't for the fact that I respond, personally, to customer e-mails on a daily basis...
    Where is our response?
    I apologize for the lengthy "blog" - but short and sweet hasn't done the trick..maybe this will?? We can only hope...

  • G60t-200 CD/DVD drive won't read XP discs

    I recently re-installed Windows 7 Home Premium after I had a blue screen crash forcing me to re-format the hard drive on a g-60t-200. I've installed all the recommended Windows updates as well as all the HP updates for the g60t-200 model that I have but now the CD/DVD drive will not read the files on older discs that I burned using Windows XP on another machine. It shows the disc in the drive and shows the folders on the disc but when you open the folders, the files are not visible. When I right click and open up the properties of the disc while it's in the drive it shows it as "UDF" format. The other machines in the house running Windows XP can read the disks just fine and show all the files. Is there an update or driver I'm missing that will allow the drives to read the files on discs burned using Windows XP?

    Hi sherifawad, and welcome to the HP Forums!
    I understand that after restoring your computer, you can no longer read CD/DVD's that were burned on XP with the Windows 7 operating system. I will try my best to help you resolve this issue. I suggest that you make sure that you have the latest service pack for Windows 7. Here is the Service Pack and Update Center for Windows.
    I am including this document for Using HP Support Tools to Update HP Software, Drivers, and BIOS with Windows 7.
    I hope this helps, please let me know how it goes.
    Thank you,
    I worked on behalf of HP.

Maybe you are looking for

  • How can I change a page position in a large document?,

    How can I change a page position in a large document?

  • EJB and JavaMail

    Hi, I have developed an EJB for sending emails using the javamail api. My problem is that when i run the same code using the a standalone java application (i have pasted the code from the EJB) and try sending mails outside the my companies domain the

  • Help regarding Java

    Can java work on Dos Operating System ???.

  • Changed operating systems

    I changed operating systems from WIndows 2000 to Windows XP. I redownloaded and installed the drivers for my webcam. When iopen it, it says that the camera may be used by something else. Why won't it work?

  • User creation in SRM-SUS

    Hi I am trying to use FM BBP_SUS_UM_API in SRM7.0 SUS for SUS user creation. I wrote below code, but User is not created. instead,it gives error "E:BBP_SUS_BUPA:120". I could not see any message text displayed. Any problem in code? But when i test in