CD ROM drive problem after upgrade to 10

Had Solaris 8, worked fine for years. Upgrade to 10 an now the CD rom drive does not work properly. When you put in ANY CD, it goes in, spins for about 30 seconds, then the door opens and stays open. No file manager windows open, I cannot access the drive. Happens in the CDE and Java desktops. When I put a CD in and go Application_Manager-System_Manager, Eject CD ROM in that 30 seconds the disc stays in, I get an error:
date-9/usr/dt/bin/dtexec) sh
cdrom0: no such file or directory
when I try mount cdrom0, get mount point cannot be determined.
I have other problems with the OS but to fix those, I need the CDROM drive!
Any suggestions?

svcadm enable smserver
and that started it right up. Since that worked, I
added the line to the /profile file so now it loads
upon logging onYou should only need to enter that line once, not every time you log in.
Also, I only saw that bug in an older solaris express build (pre-FCS). Are you using Solaris 10 FCS?
Darren

Similar Messages

Optical drive problems after upgrade to Tiger 10.4.10

I've just had my machine updated to Tiger 10.4.10 after having two new hard drives installed after a hard drive failure. I'm now having issues with burning data for backup purposes.
I can't burn anything with Mac OS Disc Burner utility, it doesn't seem to recognize blank disc's DVD's or CD's. It keeps telling me to load a disc when one is already in the drive.
System profiler recognizes CD-R's & DVD-R's when they are in the optical drive
I can burn with Toast Titanium ver 6.0.3 DVD's & CD's. The burned CD's will mount. The burned DVD's will not mount.
I have checked the burned DVD's in the optical drive of my iBook G4 Mac OS 10.3.9 and they mount on it fine.
Movie DVD's will mount & play. Software DVD's will mount and load applications.
I have cleaned the drive with a cleaning disc.
The Optical Drive was working fine before the upgrade, so what is the problem?
I can only assume two problems now!
1.) the optical drive has a physical malfunction
2.) there is a software issue between Tiger 10.4.10 & this optical drive (this is my favorite at the moment)
The upgrade was done by an Apple Authorised Service Provider they say there are no issues with Tiger & the optical drive.
So any ideas or help would be much appreciated.
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 2
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 900 MHz
Boot ROM Version: 5.1.5f0
PIONEER DVD-RW DVR-106D:
Model: PIONEER DVD-RW DVR-106D
Revision: A606
Serial Number: DBDL909690WL
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
PIONEER DVD-RW DVR-106D:
Firmware Revision: A606
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

I'm having a similar problem. I bought my G5 with Panther OS on it a few years ago. The DVD drive functioned perfectly back then. Then I upgraded to Tiger this past year which caused the DVD drive to open later..that is, I'd have to hold down the eject button for a good 2 or 3 seconds before it would open or close. Previously it responded instantly. Now what happens more and more is it can't read DVD-ROM disks that it has burned. My imac G4 with Jaguar has no trouble reading the disks but Tiger 10.4.9 and 10.4.10 simply refuse to mount DVD ROM disks that it burned.
I'm trying to make a duplicate DVD of the offending disk on my single-processor G4 and then put THAT disk into the G5 so it can read the info. Hopefully that will be my work-around.
It's got to be a software issue and I keep hoping the Apple wiz kids will put out an update to remedy this. Something's fishy with the DVD drive programming.

Intel HD 5500 driver problem after upgrade to Windows 10

i have upgraded to Win 10 and the original intel 5500 driver didnt work then i had to upgrade the driver from device manager / so i updated the driver but after a restar i got a black screen i went to safe mode and removed the driver but still stuck @ black screen // i downloded the last driver from intel web site for windows 10 but still the same issue i checked the driver page for my mode p211ne but only a wireless monitor update and wireless button

the problem has been fixed by 1- reinstalled win 10 2- win 10 removed intel hd 5500 driver as expected , but i didnt update it manually nor by update from device manager nor make any changes , so i ran windows 10 update tool from system and made all 100% update after restart things are ok now every thing is ok and new intel hd 5500 driver has been installed by win 10 update tool : 10.18.15.4248 //driver date : 29/06/2015 also invidia 840m driver has been updated thanx for any try to help and if any one still stuck with black screen the problem is that win 10 read two monitors instead of 1 so you have to click "windows button + P while black screen already on " and try to hit and click on first choise or other choises till you can see the desktop , sure u cant see any thing while u are trying to choose but you should try or may be you connect another monitor or tv and fix this issue by win button + P good luck

[SOLVED] SIS Driver Problem after Upgrade

I have an old custom-built desktop machine based on an ASRock motherboard using an SIS 741GX chipset and integrated Mirage graphics.
I have the xf86-video-sis driver installed, and all worked well until a recent update. The xorg-server now fails with a segmentation fault. I understand this is due to incompatibility with the video driver and version 1.13 of xorg-server.
I would be grateful for some advice on the best way to proceed. Should I downgrade xorg, or is there a better strategy?
Many thanks in advance.
Last edited by myrlin (2012-11-22 16:36:10)

Now that's what I call service!!!!
The new version of xf86-video-sis (just appeared on the extra repo this afternoon) fixes the problem.
An enormous thank-you to JGC and the other devs.
May Santa be kind to you all

Nvidia driver problem after upgrade kernel

After kernel update to 3.10.10 do not start X. I use nvidia proprietary drivers.

same thing happened to me. The maintainer should have had linux-3.10.10 depend on nvidia-325.15-5.
Instead, he probably just thought he would upload them at the same time hoping that it would be ok.
Obviously mirrors sync differently, and we both got screwed. Luckily I could still get to a VT, and upgrade after the nvidia pkg synced.

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Problem after upgrading to Lion

I have a Beyonwiz PVR. I have it connected to my iMac via an ethernet cable. I have never had a problem accessing my computer from the Wiz and being able to watch movies stored on my hard drive. After upgrading my iMac to Lion I now find that my Wiz no longer detects my PC??? I have not changed any settings on the Wiz and file sharing is set up on my iMac.
Any ideas??? This is clearly as a result of upgrading to Lion as it worked perfectly well before.

can anyone explain why this may be happening?
Phil...
Disable Resume > How To Disable Lion's 'Resume' Feature - MacRumors.com

Printer Problems after upgrade to Lion

Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

Layouts problem after upgrade

Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.

Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia

Problem after upgrading to ICS 4.0.4

i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your help

Do you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Several problems after upgrading to iO6

My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

Try the Padma extension.
*Padma: https://addons.mozilla.org/firefox/addon/padma/

CD ROM drive problem after upgrade to 10

Similar Messages

Maybe you are looking for