Cell definition not available in Webi

Hi Gurus,
I have defined cell definition in a bex report, but unable to get it in te webi report. We have around 20 rows & 7 columns. Out of the 2 structures used only the row structure(characteristic structure ) is visible in webi. the keyfigure structure in not visible in webi.How can I see the cell definitions in te webi report??
we are using the latest version.
Rgds,
Vandana.

Hi,
KeyFigure Structure is never visible in WebI, you will just have a flat list of Measures corresponding to all visible members of your KeyFigure Structure. For Structure based on Characteristics you will have a Dimension in Univers which will contain same hierarchy of members (visible ones) defined in Structure.
Any KeyFigure with unsupported configuration (like cumulation, local calculation ...) will not be leveraged in Universe, so it's possible to have no KeyFigure in QueryPanel outline if you have only unsupported KeyFigures in your Bex Query.
You should first try to create a BEx Query with very simple double Structure design, to make sure you get correct behavior in this case, and then create your DataCell definitions and Calculated/Restricted KeyFigures.
Regards,
Loic
PS : any unsupported DataCell will give a warning output in SemanticLayer logs, to help BOE administrator understand why BOE Universe has not same exact design as BEx Query.

Similar Messages

Calibri font not available in WebI

Hello All,
We are on BO XI R3. We have been using Calibri Font for all our reports built on DeskI. The same font is not available in WebI. Will it be possible for me to add this font in WebI and if yes, please let me know the procedure to do so.
Thanks in advance
Vignesh

hi,
Please login to BO Server and navigate to the below folder
Control Panel -> Fonts ->
Now verify if Calibri related fonts are available. If not, you can install the below font files from internet.
CALIBRI.TTF    for Calibri (TrueType)
CALIBRIB.TTF    for Calibri Bold(TrueType)
CALIBRIZ.TTF    for Calibri Bold Italic(TrueType)
CALIBRII.TTF    for Calibri Italic(TrueType)
Modify the following 2 files by adding tags for this new font.
1.fontalias.xml
2. i18n.xml file
Now, you should be able to see the new font in WEBI.
Regards,
Vamsee

Parameters from SQL command not available in Web Viewer

Hello,
I recently built a report using Crystal Reports 2008, and I'm using it with CR4E 2.0 SP1. The report has had a SQL command inserted into it, instead of pulling in tables and taking the desired fields. This was done to speed up rendering time. The SQL command also has some parameters in it to adjust the date, etc.
When the report is viewed in CR4E under the web viewer, the parameters are not available to be changed. They will appear at first for the initial settings, but cannot be changed afterward. These parameters were set to "Editable" in CR2008. In fact, other reports will work this way, but those reports don't use SQL commands as a datasource. Is there another step I haven't completed?
Thanks so much for your help!
Edited by: John_AM on Jun 29, 2009 3:31 PM - Added CR4E version.

Hi John,
This is NOT a support case management system but a public forum for all to use. If you don't get an answer then you always have the option to purchase a support case and ahve a dedicated Engineer assist you.
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you

Filter by "Result from another query" option not available in Webi

Hi all
I am trying to filter one query by zipcode based on the results of a previously run query in the same report. However this option is not available on the drop down when I drag zipcode into the filter pane. I am restricted to the options: Constant, Value(s) from a list, Prompt or Object.
I have "use subqueries enabled" within my universe and the data is held in an RMDBS (i.e. it is not an OLAP universe) so I expected this functionallity to be available.
I am using XI 3.2 and Java version 1.6.0.15, i.e. up to date.
Any help would be greatly appreciated.
Thanks
Sharon

Sharon,
Here is one method to achieve your objective, however, it involves the use of Merge Dimensions. Here goes:
In the Edit Query mode, build two queries, where the first query has all the objects, to include Zip code, and the second query has the zip code, filtered for the one at hand. (you probably have done this portion already)
In the Edit Report mode, think of your data set as Query1 (all the data objects you want) and Query2 (zip code and filtered on that zip code) and thus you'll have Query1.zip and Query2.zip. If you build a grid containing all the data you want from Query1, then simply add Query2.zip to that grid, voila, the grid will be "filtered" due to the "merge" that occurs under the wire. The 'problem' here is that you have two columns that are repetitive and there is no inherent way to "hide" a column in WebI other than masking the column with white on white (font/borders) or some folks sometimes apply Alterters to achieve the same.
Best of luck in moving forward with your task.
Thanks,
John

Different languages are not available for Web Dynpro ABAP (WDA)

Hi Experts,
We are using Web Dynpro ABAP in 2 different languages (English/Spanish). Production environment only is available for English (WDA).
How can I make Spanish language available for Web Dynpro ABAP??. Is there any configuration or installation which I am missing?? Development and QA are OK (English/Spanish)
Thank you.
Regards
David Cortés.

Hi Experts,
Any help???
Regards
David Corté

Published web galleries not available as web widgets in iWeb

hi all. sorry some are experiencing probs with iWeb '08. It does seem to have some bugs, but man it is cool for my uses! I have published a web gallery in iPhoto, but when I go to insert it in my iWeb through the Insert Menu up top or through the web widget menu it says there are no web galleries available. i've restarted my machine and still no go. I can visit my web gallery no problem on the internet. Any thoughts? just a bug that needs to be squashed?
seeegs

Same problem here. Does anyone know what this command does? Does it create an iframe tag with the web gallery embedded as a frame? Perhaps we could simulate the effect with HTMP snippets while apple fixes it.

Calendar not available on web

Hi,
We've done a fresh install of 10.6 Server on our Xserve and are currently setting up users on the machine. One thing I've run into with some of our test users is that although they can connect to their calendar through iCal, when they go to the web site, log into their personal page and click Calendar, they get the following error:
Calendar server returned an error: File not found.
Clearly the calendar does exist as the users can access them though the client, so why can they not be found on the web?
A few extra words: Our user directories and ServiceData folders are NOT in the default locations, but I have changed the paths in all of the appropriate places I can think of. Could this be part of the problem?
Am I misunderstanding how this calendar functionality should be working? I know it worked like this in 10.5, but have things changed and now the web and iCal calendars are different?
I've run into the same blip a lot of other people have with the inability to set a calendaring server for a user or groups through Workgroup Manager, but, from what I gather, this is now expected behavior. Is this correct? How would you even be able to dictate where particular services are hosted then?

In fact, I could add one waypoint to it.. BTW even if you select any of the other 2 places as End points (without adding any waypoints inbetween) it shows error..
Attachments:
Nokia Maps.png ‏293 KB

Pages not available in web browser

When I try to preview my web pages in the browser I get error
404 come up. The root file tests fine and I checked with my hosting
company and the connection is fine. I must have done something
incorrect when I set up the individual pages. Can anyone shed some
light on this please?

> This is when I try to view the page on the remote
server.
Open the dw Files Panel.
Connect to the remote site.
In the root level of the remote site, are there folders there
that you did
no create? With names like www or public_html or htdocs or
similar?
If yes, put that folder name into the box labeled "host
directory" in the
remote info of this site definition.
connect and upload the files. Are they there now?
Second possible:
What is the filename of this site's "homepage" ?
It should be lowercase index.htm or index.html for 99% of the
commercial
hosting out there. If it is something else, right-click on
the "homepage"
file in the Dw files panel and rename it.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Catch the exception thrown when database is not available in web.xml

Hi,
I have an app that uses a mysql database configured in the web.xml configuration file - a javax.servlet.jsp.jstl.sql.dataSource param
There have been occasions where that server has been down, and this causes the expected error stack trace to be dumped to the jsp page
Is there anywhere I can catch that exception in the jsp page, so the end user does not see that nasty error?
Thanks,
Tom

You have answered your own question, catch the exception with a try catch block !!
try
// doing something stupid
catch (Exception exception)
out.println("sorry user, you did something really stupid");
// it is acceptable to do nothing here if you dont want to handle the
// error or output a message
}

Web Part is not visible in Web Part gallary

Hi,
I have developed a project in sharepoint having two web parts inside it.
Initially, when there was only one web part in my project it was working fine. But suddenly when i added a new web part, it is not showing me web parts in a gallary. Event it is not available in web part list under Web Designer Gallaries.
I tried with old .wsp to deployed, but still the same problem.
On my development machine it is working with two web parts very good. but when i try to deploy that wsp on production site, it is not showing me anything in web part gallary while it was when i was working with one web part only in my project.
Please, direct me where i am doing wrong, any possibilities?
I did workarounds as
1. Check for the custom webpart feature folder under 14\TEMPLATE\FEATURES ----- Yes it exists there
2. If the feature Scope is Site
3. The webpart dll is deployed to GAC with Stsadm command
4. No web part(My Custom) found here Site Action > Site Settings > Galleries > Web Parts

in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.

Campaign Type is not available in drop down box

Hi expert,
I want to bring a new camaign type option in drop down box in web UI. in spro i define a new Campaign type(spro-crm-marketing- marketing planning and campaign management basic function---define types/objective/tactics).
but this new capaign type is not available in web ui campaign drop down box. actually i want to create a new campaign type fund management to add fund management functioanlity in Campaign.
please help to do this.
thanks in advance.
regards,
dur

Hi Shruti and Anup,
Thanks for giving focus to my question. i have maintained the cateogory Campaign in SPRO and also language is EN in description.but i am creating a new campign type for marketing plan it is available in drop down box. and i also want fund and id available in general dat area in either campaign or marketing plan.How can i achieve it?
thanks
dur

Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?

Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?
For example, say there's a SharePoint installation dedicated to particular (custom) SharePoint site. The users go to the site to carry out their tasks. There's no 'My Site' set up in this installation (and for other reasons I'm told it's not an option).
Is it possible to show a web part here that shows the user's recent activity? The built-in web part for this fails with the error 'Invalid URI: The URI is empty', and the details of it appear to say it's looking for the user's My Site to find out what to show:
SPMicrofeedContext.SetMySiteHostForContext failed System.UriFormatException: Invalid URI: The URI is empty. at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind) at Microsoft.Office.Server.Microfeed.SPMicrofeedContext.SetMySiteHostForContext()
So, while I'd be happy to write a web part (or app part) to display the information instead of using the default part, I'm not sure SharePoint is even storing the activity in a way I can access.
Some pages like the following: http://sharepointmystery.com/2012/07/22/activity-feeds-in-sharepoint-2013/ make me think it won't be possible - it says: 'The major change from 2010 is that all the [activity] content is stored in the user’s personal site, not
in a common database.'
Are activity feeds dependent on 'My Sites' or is there a way to access the information when 'My Sites' is not present in the deployment? I can't find a definitive answer in Microsoft's documentation.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

Using Bex Query with cell definition with WEBI

Hi,
Currently I am using a Bex query as a datasource for a webi, normally this works ok but I am having trouble with one particular query.
This query has cell definitions defined in the query. When i import the query into WEBI I get an MDX error.
Any suggestions?
Thanks
Flash

Hi,
We do not see all elements of the BW query in the universe, just those not using cell definitions.
We are currently on Business objects XI 3.1
Using BW 3.5
And the query runs fine using RSRT, it does show some asterix for some of the values but this can be removed by filtering on currency type in BW report
Thank You,

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.

Recently installed Service Pack 1 in SharePoint Server 2013 Farm, post upgrade we are experiencing issue when opening visio documents:
I am trying to open .vsdx (visio 2013) file but encounter following issue:
Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.
Under Document library-->Library settings-->Advanced Settings
Still I cant open file in browser as we always used to. Unfortunately we don't have Visio services in Farm.
can you share your experiences regarding this issue post Sp1 SharePoint Server 2013.
Thank You

Hi Octopus,
Based on the error message, it seems that the Visio Graphics Service is not started or the Enterprise feature is not enabled.
I recommend to check the things below:
Go to Central Administration > System Settings > Manage service on server > check if the Visio Graphics Service is started > then click Application Management > Manage service applications > check if the Visio Graphics Service application
is created.
Go to the root site settings page of the site where you got this error, click Site collection features to check if the SharePoint Server Enterprise Site Collection Features is enabled.
Go to the site settings page of the site where you got this error, click Manage site feature to check if the SharePoint Server Enterprise Site Features is enabled.
More information about the Visio Graphics Service:
http://tutorial.programming4.us/windows_server/microsoft-sharepoint-2013---looking-at-visio-services-(part-3)---visio-graphics-service-service-application.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Cell definition not available in Webi

Similar Messages

Maybe you are looking for