Release strategy: Tx CL20N Error: Entry 01 does not exist in table T16FS
Dear MM Gurus,
I was designing new release strategy for PR and PO, so I deleted all the previous entries(SPRO) available in SAP. I created my new entries but in the transaction CL20N I got the above mentioned error: "Entry 01 does not exist in table T16FS-Check your entry" . I checked the table T16FS, where the entries were available. It also showed the previous entries I deleted from SPRO.
Refering the SAP note 365604 (version 29, valid from 08.10.2008), I created the deleted entries again so that I could delete them in the required sequence
1. release strategies
2. release indicators
3. release codes
4. release groups
5. class
After deleting the entries in the above mentioned sequence also I am getting the same error in CL20N.
I ran report RCCLZUOB, it shows the entries does not exist.
Please help.
Edited by: Akshay Kurhe on Mar 2, 2009 6:02 AM
hi
check this setting
Distribution Using Object Classes -->Maintain Class Types & Maintain Classes
Similar Messages
-
Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig
Bom dia pessoal.
Ao tentar executar um dos passos no cenário de compras normais, (Assign Purchase Order), o seguinte erro ocorreu
Entry does not exist in J_1BNFITMRULE (check entry).
Detalhe: Para o mesmo pedido ja havia sido efetuada 3 entradas via monitor sem qualquer erro.
Qualquer ajuda será muito bem vinda.
At
Pedro L Nobrega
Pessoal
Ja descobri o que aconteceu, na categoria de nota fiscal, retiraram tipo de item da categoria que estava sendo utilizada.
(Projeto global).... acontece.
Para evitar este tipo de problema novamente criei uma categoria especifica para o Incoming. (Compras Normais.)
Erro corrigido.
Abs
Pedro L Nobrega
Edited by: Pedro Luiz Nobrega on Jan 25, 2012 3:56 PMResolvido
Criamos uma categoria especifica para nfe incoming (Compras Normais), para que não ocorra novamente o erro,
a nota que estava sendo utilizada tinha na configuração tipo de item que foi retirado o gerou o erro.
Grato
Pedro L Nobrega -
Position does not exist in table T528
I have transported from Dev to QAS.
I am trying to hire an employee using PA40 and when i select position it is giving an error saying does not exist in table T528Hello,
I have created a entire new org. structure in QA including the positions.
When I am trying to assign the positions I am getting the same error as entry does not exist in table T528B.
I have checked the table and there are no entires for my positions.
What I need to do now?
Kindly reply.
Thank you -
Argument does not exist in Table?
Hi,
I'm trying to create Planned Independent Requirements using the BAPI_REQUIREMENTS_CREATE.
Getting the error "Argument does not exist in Table".
I'm passing the following parameters.
REQUIREMENTS_ITEM
MATERIAL = '000000000000015197'.
PLANT = 'ABC1'.
REQU_TYPE= 'TEST'.
VERSION = '00'.
VERS_ACTIV = 'X'.
REQ_NUMBER = ''.
REQUIREMENTS_SCHEDULE_IN
DATE_TYPE = '2'.
REQ_DATE = '20101001'.
REQ_QTY = 50.
PROD_VES = '0010'.
REQUIREMENT_PARAM
STATUS = ''.
TRTYP = 'X'.
DELKZ = SPACE.
SYNCRON = 'X'.
Did I miss any parameters?
Why I'm getting this error?
Thanks
ThrunaRyan,
Are you passing all the parameters like below?
SSHDIN-DATE_TYPE = '2'.
SSHDIN-REQ_DATE = '20100101'.
SSHDIN-REQ_QTY = 100.
APPEND SSHDIN.
ITEM-MATERIAL = '00000000000012345'.
ITEM-PLANT = 'ABC1'.
ITEM-REQU_TYPE = 'TEST'.
ITEM-VERSION = '00'.
ITEM-VERS_ACTIV = 'X'.
ITEM-REQ_NUMBER = ''.
ITEM-MRP-AREA = 'ABC1'.
PARAM-STATUS = 'X'.
PARAM-TRTYP = 'X'.
PARAM-DELKZ = SPACE.
PARAM-SYNCRON = 'X'.
CALL FUNCTION 'BAPI_REQUIREMENTS_CREATE'
EXPORTING
REQUIREMENTS_ITEM = ITEM
REQUIREMENT_PARAM = PARAM
IMPORTING
MATERIAL = BAPI_MATNR
PLANT = BAPI_WERKS
REQUIREMENTSTYPE = BAPI_BEDAE
VERSION = BAPI_VERSB
REQMTSPLANNUMBER = BAPI_PBDNR
TABLES
REQUIREMENTS_SCHEDULE_IN = SSHDIN
RETURN = RETURN1
EXCEPTIONS
OTHERS = 1.
Thanks
Thruna -
Entry DE does not exist in table T005E
Dear all
I create Plan ( module PP ) when i input values in field Country " DE " is error . " Entry DE does not exist in table T005E " .Plz help me
Thanks and Regard ,
Lan nguyenDear,
Please check the entry of DE
In SPRO -> SAP NetWeaver-> General Settings-> Set Countries-> Insert Regions
In this table we maintain the regions for the Country.
Please refer the OSS Notes : 107588, 122292, 161359
Regards,
R.Brahmankar -
Entry does not exists in check table -- Validation
Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.IHi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I -
List View webpart from subsite to Top site shows random error "List Does not exist"
Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrijatry these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart -
Error: SNAP_ADT does not exist in the database - manual check required
Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
SuryHi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE) -
Error Infoobject does not exists in Infoprovider
Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
BalarajProbably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams -
Full import error : "user does not exists"
Hi all,
I had 5 separated windows based servers (32bit) with oracle database 9i. I decided to centralize them into one server. So, I configured a new Linux (64bit) and install an Oracle 10gR2. Then I configured a starter database with dbca. I prepared a full dump file from one of old servers and successfully full imported it into starter database on new Linux (10g) server. After that I configured another database using dbca. But when I wanted to full import the previous dump file into new database I have got the error "user does not exists" regarding some demo schema and import terminated unsuccessfully.
I decided to create users regarding the errors and restart the import. After each user creation I was getting a new error for a new user account.
My main question is why first time import terminated successfully without any error but second one in new database raised error?
Thank
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:38 AMHi yingkuan,
imp full=y file=.... log=..... userid=system/manager@orcl
ALTER SESSION SET CURRENT_USER = "HR"
ORA-.... : user does not exists
And I know that import will create users that are not exists. Actually, all my specified schema are created but not some of accounts
Regards,
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:59 AM -
Shipping type in delivery (Entry does not exist)
i am trying to post good issue in the delivery and i have Shipping type field as mandatory but when i try to post good issue with a value in the Shipping type the system says Entry does not exist(check your entry). Kindly help.
Regards,
ShahzadDear Mr. Khero.
You should atleast share your solution with other members as well. Knowledge sharing is a good thing and we are all here for this purpose.
Hope you do understand.
Best Regards,
AI. (Your great Friend - You remember???) -
Record Z2 SP09 does not exist in table T133D
Hi Guru,
I want to configure the screen Material Master using
IMG->Logistics-General->Material Master->Configuring the Material Master->Define Structure of Data Screens of Each Screen Sequence and
Screen sequence : create Z1
Data screen Z1 : scrn 07 (Basic Data) and scrn 14(Purchasing)
subscreen for : scrn 07(basic data ) 1002, 2001, 2561,2005 and
scrn14(Purchasing) 1005,2301,2701,2302
When I create a Material it's ok, but if I switch from basic data to purchasing by clicking the tab sheet, I got an error : Record Z1 SP09 does not exists in table T133D ? When I saw at table T133D, SP09 did not there for sceen seq Z1
(I saw for 01 / standard SAP) it's there.
Anybody can help what wrong ?
Thank'sCabe,
I am pretty sure this is a bug with your IDES system. Basically, SP09 (note that it could be say SP02 etc depending on the number of screens defined in your Z screen sequence) is the function code that is associated with the pushbutton (or tab) for the purchasing screen (screen no. 14) in the material master.
So, there should be an entry corresponding to function code (say SP09) and successor screen (say purchasing screen no. 14) in table T133D. If there is none, then message M3748 will be issued in function module T133D_SINGLE_READ_FCODE.
I have tested this in my system and I don't get the error ME748. So, there must a bug or an OSS note missing in your IDES system which is causing an incorrect update of table T133D.
I would suggest you to post the question in the ABAP forum if you need a better technical explanation of PAI events and reading function codes.
Hope this helps.
H Narayan -
Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam SAs per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv -
GR for Order (MVT 101) - Error - Table entry does not exist
I am getting error while posting GR for production order via MVT 101.
After resolving errors on G/L account and cost element, now this is the only error that I can't seem to resolve:
Check table TFBEFU_CR: entry 10 does not exist
Message no. M7001
Using SE16 I tried to check for this table, but system says it is not active in dictionary.
Please help.Hi
Please, kindly check the note 183647 - Error message M7001.
As indicated in it, please, maintain the customizing entry in transaction OPK9 for your valuation area and re-test the system behaviour afterwards.
Regards,
Mauro -
Dunning error (form does not exist)
Hi,
While performing the dunning after selection the Individual dunning notice for printout the system shwoing error that '''FORM F150_DUNN_01''' DOES NOT EXISTS.
When I tried several times to performance the dunning it showing the same error message as above said.
Can any one let me know why does this happening. please give your valuable solution regarging on the above said issue.
Thanks in Advance.
Regards,
SureshHi
In Dunning Procedure --- FBMP
you will select new entries and give Dunning procedure , name , dunning intervals in days , No. of dunning levels , line item grace periods , interest indicator , select standard transaction dunning checkbox , reference dunning procedure for texts(dunning procedure) and save.
select Dunning texts button and give company code and select customer radio button and enter.
select new company code button and give company code and enter.
select seperate notice per dunning level checkbox
Deselect Dunning by Dunning Area checkbox and save.
select back arrow and select yes for the message to save the data.
select dunning texts button once again , give company code , select customer and enter.
Dunning level (1) Form (F150_DUNN_01)
Dunning level (2) Form (F150_DUNN_01)
Dunning level (3) Form (F150_DUNN_02)
Dunning level (4) Form (F150_DUNN_02)
select dunning levels button and under print parameters , select Always Dun CheckBox's.
select charges button , give currency and enter.
select back arrow and save
Assign the Dunning procedure in Customer Master.
Check with the Dunning Procedure you had created.
Regards
Venkat
Maybe you are looking for
-
Error While Executing the Asset history report S_ALR_87011990
Hi, I am getting the below error while executing the Asset History Report - S_ALR_87011990 No data was selected Message no. AB064 Kindly advice me
-
Help needed regarding installation of Oracle 11G in Solaris10(VMware)
I am trying to install Oracle 11G in Solaris. Whenever I am trying to run the installer ,I gets below error messages. # cd /export/home/oracle # ls -ltr total 2098204 drwxr-xr-x 3 oracle oinstall 512 Mar 29 21:23 product drwxr-xr-x 2 oracle oinstall
-
How do I get my iPhone 5 out of recovery mode?
I went to update to ios 7, and when I did my phone automatically shut down and went into recovery mode. Then, I hooked it up to the computer and restored my phone. It told me that the restore could not be completed. I have attempted the restore multi
-
How do i install iPhoto on a clean install of mavericks
My macbook was getting extremely slow so i did a clean install of mavericks. Now i don't have iPhoto. I have the original install dvd, but when I try the applications install dvd it just ejects it after a few seconds. I can't find anyplace on the
-
Install Acrobat 7.0 professional on Mac (OS10.5.8)
I load the disc to my apps folder, and try to start it, but it keeps crashing. Any thoughts? Thanks