Centro - App installed to SD Card is copied to internal memory?

I have a Sprint Centro. I have installed several Applications to my SD Memory Card. Something is occurring that is automatically copying the Application to internal memory. I originally installed the software to the memory card to free up internal memory but somehow these applications are being copied. Is there any way to keep this from occurring? I have tried removing the memory card (thinking maybe that is what is causing the copy but it didn't seem to make a difference. Some of the applications that this is occurring with are: Coreplayer, Opera Mini and TCPMP. I have noticed that they must be sharing configuration information because if I delete Coreplayer from internal memory then I have to reenter the registration ID. Does anyone have any ideas what is going on?
Post relates to: Centro (Sprint)

I believe that I may have found my own solution!
In: "http://www.hobbyistsoftware.com/InsideYourTreo/run-app-from-sd-card.php" it states:
"What really happens when you run an application from the SD card...
The Palm OS actually can't run applications from your SD card.
What happens is that your launcher copies the application to RAM, and then asks the system to run it.
When the application exits, your launcher cleans up and continues.
This has a couple of important consequences:
It takes longer for an application to launch from the SD card because it has to be copied to RAM
Applications can't run 'in the background' if you keep them on your SD card (more on this later)
Some information for your application is sometimes kept in RAM (more on this too)"
I think what was occurring is that I WAS short of internal memory and when I launched these applications from the memory card, my Palm rebooted leaving the copied program in internal memory!
I think I need to clean things up! Also, I have found a Palm Application called "SaveMem" that will allow me to Launch applications from internal memory but save the program to the memory card. It appears to work OK.

Similar Messages

Will I lose apps installed on SD card?

Hi,
I've spent some time searching for my answer, but I was unsuccesful, so here's the question:
I've got installed some apps on SD card (Modern Combat 4 and TrackRacing Online) and I'm going to change this SD card (from 32 GB to 64 GB). If I copy ALL the content of the first card to the second card (which is formated of course), will these apps work?
Thanks for any answer.

Sounds pretty dumb to me. It should be easy for an app to verify, if it has been purchased. First, every phone has its unique codes and numbers (for ex. IMEI), second, my phone is kind of "binded" to my Microsoft account, right?

Wp8 app install in sd card once phone memory gets ...

Wp8 is lacking a big selling property that is, it cannot provide option to install, Apps in sd card Once phone Memory gets full, all wp8 vendors are giving stupid suggestions to switch to 920 if they need more app space, 820 is a phone at least needs 16 gigs of phone space

Are you able to move the application installed in your phone to the SD card ?
Go to the application list
Scroll to and open Storage sense
Tap phone
Select a category (apps + games, music, videos, podcasts, photos)
Select the app
Tap 'move to SD card'

Why it is not possible to install apps on an SD card on a Win 8.1 tablet?

Why it is not possible to install apps on an SD card on a Win 8.1 tablet? If it is possible to install apps on SD card in Windows phone 8.1, why is it not possible on Windows 8.1? What sort of design philosophy you follow that gives better features on
a mobile version of the OS but not on the parent OS? Kindly explain if you can!

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HT2534 How to access and install appstore free apps without providing credit card number because I do not have one?

How to access and install appstore free apps without providing credit card number because I do not have one?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...
To summarize, you must first download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

HT2526 i install 50$ redeem card in my account and i used only like 13$ but today i opened my app store and i was shocked coz i only found 0.07$ i want to know who used my money please help me

i install 50$ redeem card in my account and i used only like 13$ but today i opened my app store and i was shocked coz i only found 0.07$ i want to know who used my money please help me

Make sure you are using the correct account if you have more than one.
Purchase history won't say who actually logged in because of course it will be a person using your ID and password.
Sign into your Account > Click on your account name > Click on Account > Purchase History
iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727

CS3 InDesign & Illustrator Install Exit Code 7; Other CS3 Apps Install Fine

I feel like I'm beating a dead horse... (no offence to horse lovers out there - it's just an expression)
I'm having trouble performing an silent install of the CS3 suite from a network share on Windows 7. I've read through a number of posts on here, one of which was a 3 page post on this issue where Mac & Win 7 users alike posted failures, successes and how they got there, and another about removing the OS check feature from the application.proxy.xml file (which didn't work for me; unless I did something wrong...?) Unfortunately for me after trying much of what was suggested, I'm still facing a brick wall.
All these machines are Core 2 Duo's clocked at no less than 2.2GHz, have 4GB of RAM, have over 100GB of free disk space and are running fully updated/patched installations of Windows 7 32-bit (x86) with Office 2007 Enterprise.
When I try to install the suite silently it fails with 'Exit Code: 7', which according to the CS3_Deployment.pdf means "Unable to complete the silent workflow." If I take out the "--mode=silent" switch, the GUI launches and installs fine. I took a look at the compressed log file & searched for "Return value 3", "ERROR" and "FATAL" for clues, but its vague and nondescript. I didn't copy/paste the entire log in this post for brevity's sake, but you can check it out here:
Condensed Version: http://pastebin.com/eFKpe9wK
Unabridged Version: http://pastebin.com/MQDeQZmF
Instead, however, I do want to touch on just a few things from the log:
[    9660] Thu Dec 02 07:08:13 2010 INFO
BEGIN Setting requested payload actions
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {AC76BA86-1033-0000-7760-000000000003} Adobe Acrobat 8 Professional (At install, older versions get upgraded) per deployment file.
Setting action for {7BB7F66A-D798-45A3-A383-0727FB1EBF8E} Adobe Flash Video Encoder per deployment file.
Setting action for {abd781e6-d5ca-45aa-a5f7-f64799eb1c04} Adobe Version Cue CS3 Server per deployment file.
Setting action for {00E5C764-9525-44C3-8404-712AD06AE12A} Adobe Dreamweaver CS3 per deployment file.
Setting action for {3BC8460B-085E-47F3-9C62-8FFCBAF11D78} Adobe Flash CS3 per deployment file.
Setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Illustrator CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe InDesign CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 per deployment file.
[    9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 is forbidden by the policy.
[    9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Photoshop CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[    9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium per deployment file.
PayloadPolicyNode.SetAction: IY->IY for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium
[    9660] Thu Dec 02 07:08:13 2010 INFO
END Setting requested payload actions
[    9660] Thu Dec 02 07:08:13 2010 WARN
Some payload actions specified in the deployment file could not be applied.
...snip - snip...
[    9660] Thu Dec 02 07:08:17 2010 INFO
Checking bootstrapper progress
Ran uninstall for the bootstrapper due to an exception
[    9660] Thu Dec 02 07:08:17 2010 FATAL
Exception: Payload actions could not be set. Search the log for "BEGIN Setting requested payload actions" for details.
Exit code: 7
[    9660] Thu Dec 02 07:08:17 2010 INFO
I've got some initial questions that pertain to what's in the log file:
The areas in bold: Since the same install also fails on Windows XP machines, what does this mean exactly?
The areas in italics: Can anyone expand on what that means?
The underlined areas: What 'Policy' is this referring to: Setup's own internal policy (like the OS check) or something else?
Here's what I've done so far:
Went through the 'Run a silent installation of Adobe Creative Suite 3' document
Went through the 'Troubleshoot installation with install logs | CS3, CS4' document
Used the Adobe Support Advisor to go through the logs, but it always says that no problems are found.
Recreated the install & uninstall XML files, twice, via the "setup.exe --record=1" method for each application & the entire suiteNot that I think this is important, but I was never prompted to enter a serial number when creating the .XML files.
Renamed the XML files for each application (e.g.: Photoshop-install.xml; CS3Suite-install.xml; Flash-remove.xml etc.)
Copied the XML files to a common folder on a network share (e.g.: \\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs)
Created install batch files for each application, including the suite, that install via the following command"\\path\to\Adobe\Design Premium CS3\Adobe CS3\Setup.exe" --mode=silent --deploymentFile="\\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs\Photoship-install.xml"
Tried the installs with & without the "--skipProcessCheck=1" switch but there's no change.
No applications are running during the installs.
Verified my application.xml.override file was in \\path\to\Adobe\Design Premium CS3\Adobe CS3\payloads\AdobeDesignSuitePremiumen_US_Volume
Verified I didn't have any strange characters in my application.xml.override fileI deleted and manually retyped all double quotes just to be sure.
I noticed that the "installSourcePath" property in the install.xml files created point to a local location rather than, what I would expect to be, the installation source folder where I copied the contents of the DVD to. On a whim I changed it to point to the copied DVD files but that didn't seem to help either so I changed it back.
FROM: <Property name="installSourcePath">C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804</Property>
TO: <Property name="installSourcePath">\\path\to\Adobe\Design Premium CS3\Adobe CS3</Property>
Aside from Acrobat Reader 9.4.0, Adobe Flash Player 10 (ActiveX & Plugin) and maybe Shockwave 11, these machines never previously had any other Adobe products installed.
For what its worth, uninstalling Acrobat Reader 9.4.0 doesn't seem to help either. I didn't try removing Flash Player or Shockwave [yet].
Using the install XML files I created via "setup.exe --record=1", when I run installs for the individual applications silently [via batch files] one at a time, all applications install fine except for Illustrator and InDesign: Exit Code 7.
This may further help suggest my application.xml.override file is fine.
Even more interesting is that I get the same error on Windows XP and Windows 7 machines alike. (See the image below taken from an XP machine; the same happens on Windows 7 machines so it doesn't appear this problem is OS specific.)
Other than removing Flash Player, Shockwave and ripping out our Anti-Virus solution (Sophos), which is going to be difficult, is there anything I've missed?
Anyone have suggestions on why Illustrator and InDesign don't install?

I spoke with Adobe Support today and was directed to this support article:
CPSID_84332 - http://kb2.adobe.com/cps/843/cpsid_84332.html
Although this article speaks to CS5 installations, even though I thought I made it clear that I was working with CS3, I decided to give it a shot anyway.
The first comment passively suggests troubleshooting [all] "install errors using Creative Suite 5 install logs", which links you to CPSID_84451 - http://kb2.adobe.com/cps/844/cpsid_84451.html. But again, its CS3 I'm having trouble with and I've already linked, what I believe to be, a more appropriate CS3 [and CS4] log troubleshooting document in my first post.
Step 1 requires restarting "your computer in a minimized state before running the installer." - This isn't at all optional nor ideal when we're talking about silent installations, especially when they can take place in the middle of the day - its highly distruptive, or deployments in general. Plus, I'm not interested in developing a package that will perform the steps outlined and then undo everything. Its important to note that this isn't a one-off problem: every machine that needs to have CS3 installed experiences this problem. But for what its worth:
I did as instructed in the troubleshooting documentation but it didn't work.
No other applications fail to install, and all but these lone Adobe CS3 apps install fine; what gives?
Step 2 is to perform a repair installation of the Windows Installer. (FYI: Windows 7 ships with 5.0, my version is 5.0.7600.16385, and for the record there doesn't seem to be a redistributable download available at this time.) I can't use this as part of my silent installation package because it calls you to run `sfc /scannow` which is time consuming and, if something is found, often requires a reboot. Fortunately for me, "Windows Resource Protection did not find any integrity violations."
Step 3 is to preinstall Adobe Air and the AdobeHelp payloads:
AIR isn't part of the CS3 DVD, it has to be downloaded & installed silently (via -silent -eulaAccepted if you don't have the redistributable package); this was done but didn't help.
There isn't an 'AdobeHelp' payload, only 'AdobeHelpViewerAll', which will not allow a manual instalation so I can't do that.
In summary, these tips unfortunately did not solve the problem.

IPhone stuck in reboot loop - too many apps installed?

Hi guys!
Starting some months ago, I've had nothing but problems with my iPhone. However, I've been dealing with most of these or even solved them.
But now I'm stuck on a reboot loop for a few days and don't know what to do.
When did it start? I think it was in May when I first got panic.plist, ResetCounter and SpringBoard-CrashLogs under "Diagnostics and Usage". Following this, everytime I rebooted my phone or the battery was empty, it could take some more minutes than normal for my iPhone to boot. This loading time increased and increased, in October it once took more than two days for my iPhone to reboot. I now have really thousands of those ErrorLogs. The Apple support on the phone couldn't help me either. Additionally, the phone performed some cruel changes I can't explain: Once the language was changed, once the photo gallery had to be restored (the iPhone did that on its own).
However, sometime in November the iPhone crashed, and I was already thinking that it would now last a few days until I could use it again. But somehow it was done within 15 minutes. Without any error or reboot loop. The last two months I haven't had any problems with this until the battery was empty three days ago.
Since then, I have had the iPhone plugged in so the battery doesn't get empty and it's stuck on the bright Apple logo. After about 210 seconds the logo gets dark, then the screen is completely black and it's starting the same procedure again. Sometimes I get the vibration, sometimes the loading circle (white wheel of death!), but everytime it just starts over again.
I am pretty sure this problem appears because I have more than 1300 apps installed (yes, this is a very huge number, but I remember Steve Jobs saying that, with the folders in iOS 4, it would be possible to have a few thousand apps installed), 4000+ photos, and so on. I am pretty sure it's not a hardware, but a software problem. In detail, it's about the SpringBoard. The iPhone 4S only has 512MB RAM, so it's hard for it to load 1300+ app icons into its memory (which it has to because the SpringBoard has to run without any lags). Only in some cases it's able to boot that up, but I have absolutely no idea which cases these are and why it has run well for the last two months, but beginning with the new year stopped to work.
Furthermore, the panic.plist entries all say that the problem is a watchdog timeout. Apple's iOS seems to allow the devices only to take up to two minutes (always around 120 seconds in the CrashLogs) to boot up, then probably another 120 seconds to launch the SpringBoard process (which explains the watchdog timeouts in the SpringBoard-CrashLogs).
I will not restore the iPhone because I unfortunately haven't backed up for a long time and there have been many data changes since the last backup.
So altogether, I tried to collect all the information I know here, but that's really not enough. Apple unlikely wants to help me, the phone support was really nice, but even asked his superior, who couldn't help either.
My questions to you folks now are: Do you have any more information regarding panic.plist's, watchdog timeouts or reboot loops?
What would your advice be? Any chance to get onto my data and back it up? Or is waiting the best solution?
Would it be better to try several hard resets, or let the battery run empty and start the whole process again, or just let the phone plugged in so it tries to reboot on and on until it's hopefully successful sometime?
And: Would it maybe increase the loading time if I would take the SIM card out of the iPhone, so the chance to have an successful try would be higher?
Note: I am still using iOS 5.1.1 because I am completely sure that I'd have to buy an iPhone 5 to run 1300+ apps on iOS 6.

Okay, some more information about this.
Apparently there is a 'watchdog' that listens whether the iPhone's software responds or not. If it doesn't, it forces a restart, and also creates a panic.plist entry (under Diagnostics). Unfortunately the responding time is only 120 seconds. The problem I have now is the so called 'Application Map'. To ensure a smooth browsing through the different screen filled with apps, this map is regenerated everytime the user installs a new app or deletes one. Because I have more than 1300 apps installed, generating this Application Map usually takes more than two minutes. I can only hope that sometime in the next days my iPhone will be able to do this in less than 120 seconds (like it has done that several times before).
I still can't explain why everything had been working great during the last two months. I have probably installed some new apps, but also deleted other ones, so the number of total apps didn't really increase heavily.
However, I've read about some possible solutions to this problem (without restoring - which would solve the problem only temporarily anyway):
Hard-resetting the iPhone until the screen is completely black, then wait a few minutes, then turn the device on. It's possible that this has to be repeated several times, but for the user who posted this it resolved the issue.
For all the (in this case lucky) guys with a jailbreak: SSH into the iPhone, then temporarily move the watchdog located under /System/Library/SystemConfiguration/mobilewatchdog.bundle to a different folder, the iPhone will boot up after a few minutes. Then just move the watchdog back. It's a shame that apparently jailbreak users can resolve this issue, while normal users can't.
I also want to note that this problem has been appearing since iOS 2, which came out more than four years ago. It would be really no big deal for Apple developers to change the 120 seconds to e.g. 300 or even more. I've found hundreds of threads, not only here, where users complain about exactly the same issue. I don't have any hope that an Apple employee will ever read this, but if so, please keep that in mind. I don't understand why Apple has done nothing to solve this issue.
However, if you have any more ideas, please reply here. If there's anyone around here who has managed to successfully install more than 1300 apps on his iPhone (or iPod touch), please post that.

HT204088 Why does AppStore crash when I try to return to Utilities category after viewing a second or third app (AppStore quits ,iPad (1.1) goesto home page with AppStore on it. 20+ of 32GB available, 28 apps installed, iOS 5.1.1 (says sw "up to date")

My ipad(1.1) jumps out of Appstore after I've viewed 2or 3 apps, seems to be happening more often now. It returns to the page the Appstore icon is on. When I select Appstore again, it opens on the page of the last app downloaded, then I can return and browse Utilities category until next crash. It has 20+ GB available of 32GB, 28 apps installed, I don't use iTunes. I don't know what OS is installed, it's not cellular enabled. I haven't checked other categories and unsure if reducing open browser tabs affects the problem, possibly lets Appstore run longer before crashing. It always crashes when I attempt to return to the category. OSVersion is 5.1.1, Update Check says software is up to date. It has crashed if I scroll thru the pages of apps too fast.

If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "I/O error"
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

ITunes cannot sync... apps installed on the iPhone could not be determined.

I am trying to activate an original iPhone. I keep running into issues (partially because the rest of the world is activating 4Gs phones). I would appreciate any help that is available.
I am working on a MacBook running OSX 10.5.8. My iTunes has been updated- 10.5.
I am currently getting a message- iTunes cannot sync apps to the iPhone “MRL iphone” because the apps installed on the iPhone could not be determined. The iphone screen shows the usb cord/plug pointing to the itunes logo whether attached to a computer or not. And says slide for emergency use.
-I have restored to factory settings several times both from a previous backup and set up as new phone.
-I have even attempted to use another Mac and a family member's windows machine with similar results on all.
-I have uninstalled and reinstalled iTunes
-I have put the phone into the recovery mode and restored from there
-I have restarted both the computer and phone numerous times
-I have replace the SIM card with a new card from the provider
-I have received an email saying the phone was activated (and have called to verify with the service provider)
I'm sure there are other things I have tried as well that I am forgetting, as I have been at this now for about 3days. There have been times when I got nothing but a breif "accessing iTunes store" and then a white screen with the grey word iPhone in the middle. At least now I have the normal summary screen when clicking on the device. Unfortunately I am still getting an error "iTunes cannot sync apps to the iPhone “MRL iphone” because the apps installed on the iPhone could not be determined." I am not attempting to sync apps, just sync the phone to get a current/clean backup. I will want to sync the apps, just haven't been able to get that far.
By the way, prior to starting this process the iphone worked perfectly- no issues. This just seems to have become an issue when I attempted to restore to factory settings for a clean start with the new line.
This is the furthest I have been able to get in the process. I really need to get this up and running soon as I will need the phone for the work week.
Please help!

Not sure if this is a solution or not but it seemed to work for me. Simply restart your iphone.
From the iphone troubleshooting page
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.

ITunes cannot sync apps to the iPhone because the apps installed on the iPhone could not be determined

There are dozens of reports on this bug on the forums, and not one of the suggestions worked for me. After reading slocks post at https://discussions.apple.com/message/17157627#17157627, I noticed that iTunes did indeed back up different apps each time I quit, restarted, and re-attempted sync, and that it always failed on the same one (USA Today in my case). I deleted USA Today from my phone, quit and restarted iTunes, and synced again. iTunes reinstalledUSA Today for some reason, but the sync completed then successfully, and all subsequent syncs also complete successfully. I then noticed that the App Store was promptimg me to update USA Today, which I did fully expecting that the update would cause the problem to recurr, but it did not. So it appears a corrupt app is causing this problem, and deleting the app from your phone may resolve it.
If you are getting this error, my suggestion is to watch during the sync, and note which application is being copied when the sync fails. Delete that app from your iPhone, and try to sync again. Please post the results here. Thanks!

For me app wasn't the problem, the problem was the app needed updating. I updated all in my iPhone, but that wasn't doing it. I followed what someone else did and updated my apps "in iTunes" and it was perfect!
W Buchanan
Re: iTunes cannot sync... apps installed on the iPhone could not be determined.
Nov 21, 2011 5:40 PM (in response to jp_ofarrell)
Confirmed!
I was getting the same error message. After reading your post, I updated all my apps in iTunes. Sync worked as normal after that. Now we'll have to see if this happens again when other apps are updated.

My new iPhone 5 won't connect to iTunes, and when I connect to my computer it comes up as a usb storage device, also in the phone itself under usage it shows internal memory of 2gb and sd card 64 gb, is this an original iPhone or have I been sold a copy

My new iphone 5 can not connect to itunes, it comes up as a usb storage device when I plug it in, also in the phone under settings/usage it shows internal memory of 2gb and SD card of 64gb, I cannot get it to connect to itunes at all so cannot sync etc, is this a genuine Iphone or a copy. I have owned 4 iphones and never had a problem with connecting to iphones and restoreing to a backup.

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

Install New SD Card

I'm replacing the 1GB card with a 16 GB card, Whats the easiest way to transfer the data to the new card?
Copy and paste everything via Windows Explorer?
Backup and Restore via Desktop Manager?
Device Switch Wizard via Desktop Manager?
Or something completly different?
Thanks again for any help,
Jamie

Hi again. I have not used AppWorld myself so cannot give you a definitive answer. Perhaps another user can do that. I believe those are archived applications from your prior downloads as you cannot actually run applications from/on the media card. See this kb article: Archiving apps in BB AppWorld
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

How to remove glitched nameless app install box?

Hello.
Recently updated my mother's iPad (The New one) to 8.3 from whatever iOS version it was shipped with (it was never updated before). Had to do so only because it was in an endless reboot loop for some reason (maybe due to having way too many apps installed), ending up in restore mode at best. After restoring it from iCloud backup, there's one app that just stuck and won't let me delete it by any means. It's nameless. Literally. When clicking on X button, the confirmation popup has only an empty pair of «». It also has no name after rebooting the device (which fixes its being on "waiting", leaving just empty gray box).
What doesn't work:
- obviously, normal way of deleting via X (which is there, but pressing it has no effect on the app)
- as listed above, rebooting, even by holding Power+Home for hard reboot
- connecting to iTunes and removing it from app managing screen - there's no X on it there
- restoring from iCloud copy again - it *returns* in exact same state, even when using fresh backup
- exiting app store account, rebooting and then logging in again
My guess is this was one of the oldest apps that is no longer on AppStore and/or no longer compatible with the device, while still listed in iCloud backup, but can be wrong on that. There was a hellish ton of free apps installed, my mom pretty much installed everything she could for free and almost never deleted anything, collecting over 1000 apps.
Would appreciate any ideas. Even though it's not that important, but I've been determined to clear this mess, removing 90% of that collection, and this ghost app just keeps bugging me.
Going with clear install without iCloud restore is way to dangerous to even think about. Because, y'know, game progress, millions of cat photos... the loss of that can't possibly be forgiven.

You could try to make a backup in iTunes, and then restore from iTunes.

Itunes cannot sync apps to iphone because the apps installed on the iphone could not be determined

when i try and sync my iphone 4s it shows a message saying itues cannot sync apps to iphone because the apps installed on the iphone could not be determined

dcjsail wrote:
I am encountering the same problem. This is a good start but need some guidance:
1. How do you get to the iTunes files you mention?
2. What specific files do you need?
3. Will I lose any data?
Thanks for any help.
1) The files are in the iTunes folder. The iTunes folder is in your Music folder which is in your home folder (user).
So go to <user home>/Music/iTunes.
2) Any files that end with .xml, .itl, or itdb. Please note that I had upgraded iTunes many times over the years and had several obsolete versions of those files in my iTunes folder. By moving them out and forcing iTunes to create new ones (see steps 3 & 4 above), I was able to determine which ones iTunes actually needed. Those were the files that I copied back into the iTunes folder, overlaying the new empty files.
3) Always make backups before you try tricks like this. I would recommend backing up your entire iTunes folder. I did not experience any data loss. Those files seem to contain your iTunes library information but not the actual music, movies, etc. When I started iTunes in step 3 (see above), iTunes showed an empty library. After performing step 4 (see above), I started iTunes again and it showed all my music, movies, etc. So I assume that the actual media files are stored elsewhere. Again, always make backups before trying something like this. I use Time Machine.
Good luck. Let us know what happens.

Centro - App installed to SD Card is copied to internal memory?

Similar Messages

Maybe you are looking for