CFAJAXPROXY: "The specified CFC proxy could not be found."

{ColdFusion 8, latest, Windows.}
The following statement occurs (in an included CFM file):
<cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
The "crv2_js.cfc" file is indeed located in the same directory. (If you request it at the same URL, and enter the administrator password, a nice formatted description of the library and its methods dutifully appears, so it is there...)
But the error is:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
Looking also on the Administrator screen, I confirm that the directory is not mapped.
Other, <cfinvoke> calls have been used to a sister CFC-library in the same directory without incident. So I am confident that the message that I am seeing is somehow bogus ... but I do not yet know what sort of "bogosity" it must be.

Now here is something I didn't expect to see. When I turned on "extended error information" (or whatchamacallit...) I got this additional information in the displayed log:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
The error occurred in C:\Inetpub\wwwroot\NCPT\CRV2\cr_PrototypeManager.cfm: line 235
                                    <cfgridcolumn
                                     name="DefinitionIsLocked"
233 :                                     header="Is In Use"
234 :                                     type="boolean"
235 :                                     select="no">
236 :
237 :                                    </cfgrid>
(Ooh... formatted! Now ain't that slick!)
I took the liberty of pasting-in lines 231-232, which the debugging-output did not include. In fact, here is the entire block of code:
<cfgrid name="datagrid" pagesize="5" format="html" width="100%" height="200"
"cfc:proxy.GridSource_ReviewPrototypes({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{c fgridsortdirection},getPageSize())">
<cfgridcolumn
   name="ID"
    header="ID"
   display="false"    >
<cfgridcolumn
   name="TemplateName"
    header="Template Name" >
<cfgridcolumn
   name="PrototypeClassName"
   header="Prototype Class" >
<cfgridcolumn
   name="Description"
   header="Description">
<cfgridcolumn
   name="Enabled"
   header="Enabled"
   type="boolean">
<cfgridcolumn
   name="DefinitionIsLocked"
   header="Is In Use"
   type="boolean"
   select="no">
</cfgrid>
So... why on earth would an error like that be showing up at a place like this? (Removing the "select='no'," on the wild-guess theory that it might be "the odd man out," as-expected had no useful effect.)
My hypothesis here is that the "failure location" actually has nothing to do with anything: this is simply the last clause in the CFGrid construct, and the computer is now trying to place a call to this function:
<cffunction name="GridSource_ReviewPrototypes" access="remote" returntype="any">
<cfargument name="page"                 required="yes">
<cfargument name="pageSize"             required="yes">
<cfargument name="gridsortcolumn"       required="yes">
<cfargument name="gridsortdirection"    required="yes">
    <cfargument name="customPageSize"       required="no"     default="0">
Uh huh... straight out of a demo.
I thought I had just-now discovered the problem, as I was writing this, because the "bind" expression had two additional parameters which are not listed in <cfargument> tags. But, much to my surprise, it didn't fix it.
To be absolutely complete in my description:
In an included header-file, we have: <cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
On this (Windows) host, the file-name of the CFC file is "crcv2_js.cfc" and it is located in the same directory as both the cfm and the included cfm.
In the <head> portion of the main page, we have (in an in-line <script> tag):
var proxy = new ServerProxy();
    proxy.setErrorHandler(showError);
    proxy.setCallbackHandler(handleResult);
I'm starin' at this thing and starin' at this thing and everything I see is screamin' at me, "bogus!" 'Cept I know it can't be.
The generated page-source code includes the following, including a bit which I have highlighted in bold face. I don't know where that bit came from.
<script type="text/javascript">
ColdFusion.Ajax.importTag('CFAJAXPROXY');
</script>
<script type="text/javascript">
var _cf_crv2_js=ColdFusion.AjaxProxy.init(
'/CRV2/crv2_js.cfc','ServerProxy');
but it does seem plausible since the URL to the site-page (on case-insensitive Windows) is, indeed:
   http://tlcapps/crv2/cr_PrototypeManager.cfm
and, again, if I type in "http://tlcapps/CRV2/crv2_js.cfc" and prove that I do know the proper ColdFusion admin-password, I get a nice pretty-printed description of this library and its methods... including the one I am trying to call. It does exist.

Similar Messages

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

Get message " The local repository database could not be found or is corrupted"

Hi
I want to update the System drivers , but constanly getting the massage
"The local repository database could not be found or is corrupted"
not sure what to do
cannot find any reference to the error
Please assist
This is getting to me
Johan

Hi,
I have the same issue (on a windows 2008 R2 SP1)
I want to do a backup from my automation (a simple batch .cmd)
I'm doing this command:
C:\Users\Administrator>wbadmin start backup -backuptarget:s:\backup -exclude:s: -allCritical -include:C:,R: -quiet
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
Retrieving volume information...
This will back up volume System Reserved (100.00 MB),New Volume(R:),DISK_S(S:) (Selected Files),Local Disk(C:) to s:\backup.
ERROR - The specified backup location could not be found or is not a supported backup storage location.
The only way to get this working, is working via UNC to the local drive S-drive
C:\Users\Administrator>wbadmin start backup -backuptarget:\\myserver\s$\backup -exclude:s: -allCritical -include:C:,R: -quiet
However, the backup succeeds with these warnings:
Retrieving volume information...
This will back up volume System Reserved (100.00 MB),New Volume(R:),DISK_S(S:) (Selected Files),Local Disk(C:) to
\\myserver\s$\backup
and giving a warning
The backup of volume DISK_S(S:) could not be completed. Error: The requested operation could not be completed due to a file system limitation
The backup operation completed with errors.
Looks like the wbadmin does not read the -exclude option?
Regards,
David

One of the specified disk images could not be opened

I cannot believe how instable my system is. I switched to Mac to get a reliable system, but I cannot do without Windows entirely, hence my heavy use of VPC.
Today I got the small grey screen "You need to restart your computer". I was running VPC at the time. All apps were closed except Windows Explorer (the file system). The cause was merely unplugging my broadband connection. Wow!
On rebooting VPC I got:
"One of the specified disk images could not be opened. The disk image file is not the correct file type or uses a file format that is unsupported by this version of Virtual PC."
I "detached" my "drives" 2+3, which were pointing to my Drive2.vhdp and Drive3.vhdp data "drives" and tried again. No luck.
Drive 1 was pointing to Disk1.vhdp, which is a part of my Windows 2000.vpc package. I don't believe that it was pointing there before the crash.
# side note #
(The Windows 2000.vpc package is an old installation that I don't use but have not deleted. I currently use one called: "Windows 2000 copy 1-011105") which might or might not be a copy of "Windows 2000.vpc." I've had so many problems, it's hard to say.
I then tried and successfully detached the Disk1.vhdp and received a warning:
"The hard drive data previously used by Drive 1 is no longer contained in this PC document. The data has been moved to a separate Virtual Hard Drive Document "Windows 2000 copy 1-011105 Disk1.vhdp".
On examining the above package I find:
BaseDrive.vhd 14.45GB (size about right) dated last night when I last closed VPC
MainPackageFile Alias
UndoDrive1.vud dated at the time of the problems.
On examining my "Windows 2000 copy 1-011105.vpc7 I find:
Configuration.plist
IconCache
MainPackageFile Alias
StartMenu.plist
Do you have a suggestion as to how I can rescue my above mentioned BaseDrive.vhd please? This is more recent than my last back-up.
Many thanks in advance.

Problem solved.

The specified cache entry could not be loaded during initialization

The OBIEE server is failing every few minutes of working.
I saw in the NQServer.log:
The specified cache entry could not be loaded during initialization.
Cache entry, '/home/oracleadmin/OracleBIData/cache/NQS_rprt_734086_39693_00000001.TBL', is invlaid due to either non-existing file name, size does not match, exceeding maximum space limit nor exceeding maximum entry limit, and it's been removed.
I checked the directory and there is no space limitation.
Can someone please clarify?
The server/Config/NQSConfig.INI is as follows:
[ CACHE ]
ENABLE = YES;
DATA_STORAGE_PATHS = "/home/oraceladmin/OracleBIData/cache" 2000 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;

It's more than enough if you are using it for .tmp and .tbl files storage. Have you checked work_directory_path in NQSConfig.ini file .Is it on diffrent mount point.Usually we wil create a seperate mount point and use that as storage location.
b. Instead of using SAPurgeAllCache() , can I add shell script which delete the files fromt the cache directory and the execute run-sa.sh?You need to understand diffrence between OBIEE rpd cache and .tbl and .tmp file. SAPurgeAllCache() will purge cache from RPD.It wont purge .tmp or .tbl files.These files will be stored in some physical location.When a report start executing .tmp file will start evoluting and after execution of report it will be purged by OBIEE server automatically.
see this blog for some insight into this topic
Re: TMP Files uneder /OracleBIData/tmp
Regards,
Sandeep

7110 and The specified domain controller could not be contacted

Hello,
Running a 7110 with 2010.Q3.2.0 Software Release and can't seem to join a Windows 2008 SP2 x64 Active Directory Domain.
I get the following:
error: The specified domain controller could not be contacted, or the domain is
invalid for the controller.
Does anyone know of any known bugs????

Click Help: Active Directory - there is a link to a registry setting you need to make.

Can someone please help me!! I keep trying to download itunes but get a message that and error has happened 2/3 and check window activity. Then it shows A sever with the specified host name could not-- and then it cuts off the rest of the message.

I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!

It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.

The connection parameters file could not be found

Hi,
I`m receiving the message "The connection parameters file could not be found" every time I try to access my local sybase data base from dbisqlc.exe. I work with Sebel 78 and I have entered as parameters my ID, my password and the path to the .dbf file.
Could anyone please advise?
Thanks

Hi,
Try specifying the ODBC Data Source [Create an ODBC Connection] and specify the Data Source File (.DSN) in the Login Tab of (dbisqlc.exe) under
"Choose an ODBC datasource to supplement the connection parameters" section.
Hope it helps.
Regards,
Joseph

Trying to sync voice memos I get "was not copied to the iphone because it could not be found"

I recorded some "voice memos" on my iPhone 5 (iOS 6.1.3). I now just want to get them onto my computer. I have followed the instruction from other posts and selected the "Include Voice Memo" checkbox and also the "Voice Memo Genre" checkbox located on the Music tab. I then click on Sync and get the following error ... "Some of the items in the iTunes library, including ----- were not copied to the iPhone because they could not be found". So I understand that the memos were not copied to the phone ... this is good since I already have then on the phone. I want, instead for them to be copied FROM the phone to the computer. So what's the problem I thought that SYNC'ing meant copying new files from the iPhone to the computer as well as vice versa.
The Voice Memo is toolarge for me to simply email to myself so I need to understand what is causing this so that I can get around it. I have noticed that when I attempt to "Organize Library" and check "Consolidate Files" (suggested by some forum somewhere) when I close the dialog box and sync again, that when I return to the "Consolidate Files" checkbox i see that has actually cleared itself and is no longer checked. I am not sure if this is related or not.
I have a very business recording that is on my iPhone and MUST get this audio off the phone ASAP. Any help would be appreciated.
Sincerely,
gstenstrom

The dialog tells you the path to the song is wrong/not there. Make sure you can play it in iTunes.

I am getting this iCloud error message at pc startup: The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

The service DS.RFCService could not be found on the client side

Hi Experts,
I am facing the following error message when i try to create SAP connection from management Console of DataServices 4.0 SP1
"The service DS.RFCService could not be found on the client side"
In Management Console...
SAP connections->RFC Server configuration.
Trying to add RFC Server interface. it says
The Service DS.RFC Services could not be found on client side.
can anyone help me out of this issue..plz
In my System I installed SAPBusinessObjects BI Platform 4.0 instead of Information platform services,BODS 4.0 SP1,IS 4.0 SP1...
I checked the CMC ->servers->EIM -APS services->properties. i could not find any RFC or admin services running.
anything is missing? any note explain about this?
Pls advice
Thank You In Advance.

Hi,
Check this note - KBA 1671522, it holds good for RFC also.
Arun

The service DS.AdminService could not be found on the client side

HI,
we have installed below
Software
Version
IPS
INFORMATION PLATFORM SERVICES 4.1 SP02 WINDOWS (64B
Data Service
DATA SERVICES 4.2 WITH SP01 WINDOWS (64B)
Information Steward
INFORMATION STEWARD 4.2 WITH SP01 WINDOWS
SAP NW 7.4
Netweaver 7.4 portal
When I login to portal with below links I am able to see the related screens.
http://host:port/irj/portal
http:://host:port/BOE/CMC
http://host:port/BOE/InfoStewardApp/1403181301/ICCExplorer/logon.do
However when I log:portin with below link using admin account I am facing error :
Welcome Administrator
Logout
The service DS.AdminService could not be found on the client side (FWM 02027)
Please see attachment.
http://://host:port/DataServices
Please help. Thanks.
Regards,
Krishnam

Please see below properties for EIM APS. please let me know where can I check.
Server Name:
ID, CUID:
3806 , AWJiF9VQoMtJiEyRIjv0py4
Node:
USMHR1_ERP301 (USMHR1-ERP301, SAPDataServices-S)
Description:
EIM Adaptive Processing Server
Command Line Parameters
-server -Dcom.sap.vm.tag=USMHR1_ERP301.EIMAdaptiveProcessingServer -Djava.awt.headless=true "-Dbobj.enterprise.home=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/" "-Dbobj.javaserver.home=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/" "-Dboe.common.dir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/lib/" "-Dboe.external.dir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/lib//external" "-Dboe.bundles.dir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/lib//bundles" "-Djava.io.tmpdir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/temp" "-Dbusinessobjects.logs.home=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/" "-XtraceFile=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/aps_USMHR1_ERP301.EIMAdaptiveProcessingServer_jvm.log" "-XX:GCHistoryFilename=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/aps_USMHR1_ERP301.EIMAdaptiveProcessingServer_gc.prf" "-Xloggc:D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/aps_USMHR1_ERP301.EIMAdaptiveProcessingServer_gc.log" -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:LogGcMaxFileCount=3 -XX:LogGcMaxFileSize=5m "-XX:ErrorFile=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/[email protected]" -Xms512m -Xmx2g -XX:MaxPermSize=256m -XX:+UseParallelOldGC -XX:+HeapDumpOnOutOfMemoryError "-XX:HeapDumpPath=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/" -XX:+ExitVMOnOutOfMemoryError -Xjvmx -XsapSystem:08 -Xrs -Djava.net.preferIPv4Stack=false -jar "D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/bin/boeserver.jar" -workdir "D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/work"
-name USMHR1_ERP301.EIMAdaptiveProcessingServer -pidfile "D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/serverpids/USMHR1_ERP301_USMHR1_ERP301.EIMAdaptiveProcessingServer.pid" -ns USMHR1-ERP301.corp.pattersoncompanies.com:6400
Common Settings
Request Port:
Auto assign
Host Identifiers:
Auto assign
Hostname
IP Address
Hostname Value
(IPv4) (IPv6)
Automatically start this server when the Server Intelligence Agent starts
Use Configuration Template
Services Manager
Service Startup Timeout (seconds):
Restore System Defaults
Set Configuration Template
TraceLog Service
Use Configuration Template
Log level:
Unspecified
None
Low
Medium
High
Restore System Defaults
Set Configuration Template
Data Services Job Launcher Service
Use Configuration Template
Configuration Parameters
Log Level:
NONE
INFO
FINER
Restore System Defaults
Set Configuration Template
Data Services RFC Server Service
This service has no configuration property.
Data Services View Data Service
Use Configuration Template
View Data Service Configuration
Service Name:
Listener Port:
JMXConnector Port:
BatchSize (KB):
Minimum Shared Service Providers:
Maximum Shared Service Providers:
Maximum Dedicated Service Providers:
Recycle Threshold:
Number of attempts to launch service provider:
Maximum idle time for shared service provider (minutes):
Log Level:
NONE
INFO
FINER
Restore System Defaults
Set Configuration Template
Data Quality Service
This service has no configuration property.
Data Services Metadata Browsing Service
Use Configuration Template
Metadata Browsing Service Configuration
Service Name:
Maximum Data Source Connections:
Retry attempts to launch Service Provider:
Stateful Connection Timeout (seconds):
Stateless Connection Timeout (seconds):
Recycle Threshold:
Log Level:
NONE
INFO
FINER
Collect Connection Statistics
Listener Port:
JMXConnector Port:
Restore System Defaults
Set Configuration Template
Cleansing Package Builder Auto-analysis Service
This service has no configuration property.
Information Steward Data Review Service
Use Configuration Template
Data Review Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Information Steward Metadata Search Service
Use Configuration Template
Search Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Information Steward Metadata Integrator Service
Use Configuration Template
Integrator Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Information Steward Application Service
Use Configuration Template
Application Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Data Cleansing Advisor Service
This service has no configuration property.
Information Steward Administrative Task Service
Use Configuration Template
Task Services Configuration
Concurrent Thread Instances:
Thread process timeout (minutes):
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Cleansing Package Builder Publishing Service
This service has no configuration property.
Cleansing Package Builder Core Service
This service has no configuration property.

The table 'User1.V_Order' could not be found."

I wrote the codes below to change connection at runtime. I ran into error "The table 'User1.V_Order' could not be found." Anyone encountered this before? Any solution? Thank you.
Envionement: VS 2005 Crystal Report, Oracle Database, OraoleDB.Oracle (oledb)
1 Dim myConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
2
3 myConnectionInfo.ServerName = ServerName
4
5 myConnectionInfo.UserID = UserID
6
7 myConnectionInfo.Password = Password
8
9 For Each mySubreport In myCrystalReportSource.ReportDocument.Subreports
10
13 For Each myTable In mySubreport.Database.Tables
14
15 Dim crLogOnInfo As TableLogOnInfo = myTable.LogOnInfo
16
17 crLogOnInfo.ConnectionInfo = myConnectionInfo
18
19 myTable.ApplyLogOnInfo(crLogOnInfo)
20
23 myTable.Location = UserID & "." & myTable.Name
24 'myTable.Location = UserID & "." & myTable.Location.Substring(myTable.Location.LastIndexOf(".") + 1)
25 Next
28
29 Next
30
Edited by: user5122447 on Sep 12, 2008 9:43 PM

I had the same problem. Go to your confirm email and click the link with the verizonwireless.com/iphoneorder thing. Then under the start order button push that. and it will bring up the status page.

I am an absolute newcomer to Lightroom. I have downloaded images from camera (OMD EM1) and divided them into folders. Some folders work ok in Develop mode. With other folders I get the words "This file could not be found". What should I do

As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found". What should I do?

may i suggest opening the files in Olymous Viewer 3 and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files
The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
. The tiff files just LOOK better in LR after the conversion . there is a youtube on this subject and when i tried it myself i was impressed

Error 445: The Credential Security Service could not be found:

Hello,
We are trying install Adobe LifeCycle Reader Extensions 6.1 on WebSphere 5.1. But when we access the web page: http://hostname:9080/ares, upload a file, click next, web page generate an error:
An Error Has Occurred
Error 407: An unexpected internal error occurred: 'java.lang.IllegalStateException: javax.servlet.ServletException: Error 474: The credential permission settings could not be processed: 'com.adobe.solutions.ares.ARESException: Error 445: The Credential Security Service could not be found: 'javax.naming.NameNotFoundException: Context: ISDAPP15/nodes/ISDAPP15/servers/server1, name: /ejb/com/adobe/solutions/credentialsecurity/CredentialSecurity: First component in name CredentialSecurity not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]'.'.'.
I check Adobe website, there is one article (http://www.adobe.com/support/products/enterprise/knowledgecenter/c4690.pdf). But the solution in this article does not work for me.
Any help will be appreciated.
Thanks,
Grace

Well ticket system seems slower.
samsung |
kadın |
saç modelleri

CFAJAXPROXY: "The specified CFC proxy could not be found."

Similar Messages

Maybe you are looking for