I am an absolute newcomer to Lightroom.  I have downloaded images from camera (OMD EM1) and divided them into folders.  Some folders work ok in Develop mode.  With other folders I get the words "This file could not be found".  What should I do

As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found".  What should I do?

may i suggest opening the files in Olymous Viewer 3  and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files 
The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
. The tiff files just LOOK better in LR  after the conversion . there is a youtube on this subject and when i tried it myself i was impressed 

Similar Messages

  • When I try to sync i get the message "original file could not be found.  What does that mean?

    When I try to sync i get the message "original file could not be found.  What does that mean?
    Have i lost all the music on my computer?

    iTunes' library keeps track of where your tracks are located. If you move a track, or keep your music on an external drive and don't turn it on before starting iTunes, or your computer's file system becomes corrupted, or iTunes' library gets corrupted, or..., then iTunes goes to where it thinks the file is located, can't find it, and you get !

  • Itunes installation problem I get the error IXP577 file could not be found.

    I keep getting this error, I get it if I try to install the new version of Itunes, or if I try and delete the version already on my computer. This is my personal laptop and have administative access to everything on here thru windows
    The feature you are trying to use is on a network resource that is unavailable.
    Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below.
    C:\Users\user\AppData\Local\Temp\IXP577.TMP\
    Please help, I have been trying for months to get this work!

    may i suggest opening the files in Olymous Viewer 3  and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files 
    The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
    . The tiff files just LOOK better in LR  after the conversion . there is a youtube on this subject and when i tried it myself i was impressed 

  • CV02N Error in Windows 7: This file could not be found!

    After uploading a file to the DMS, we could usually double click the file name and the file will be opened automatically in WORD.
    This was succeeded in Windows XP.
    But in Windows 7 environment, after clicking the file name,  the WORD is started, no file opened. It says: This file could not be found!.
    Is there any solution about this issue? Thanks!
    BTW, I have tried GUI 720. But the issue remained the same.

    jcaverly wrote:
    I imported from the external drive, and see 'Add' highlighted, now what.
    Sorry I'm being so dense, all the language seems arbitrary.
    Now what? You've imported the photos, do whatever you want with them.
    You should really consider reading or watching some basic tutorials about Lightroom, such as
    Lightroom 5 - Free Quick Start Guide PDF eBook | The Lightroom Queen

  • The connection parameters file could not be found

    Hi,
    I`m receiving the message "The connection parameters file could not be found" every time I try to access my local sybase data base from dbisqlc.exe. I work with Sebel 78 and I have entered as parameters my ID, my password and the path to the .dbf file.
    Could anyone please advise?
    Thanks

    Hi,
    Try specifying the ODBC Data Source [Create an ODBC Connection] and specify the Data Source File (.DSN) in the Login Tab of (dbisqlc.exe) under
    "Choose an ODBC datasource to supplement the connection parameters" section.
    Hope it helps.
    Regards,
    Joseph

  • HT1338 Tried to download the OS X ML upgrade - getting: The product distribution file could not be verified. It may be damaged or was not signed.

    I am running Lion 10.7.4. Tried to download the OS X Mountain Lion upgrade in my App Store - getting: The product distribution file could not be verified. It may be damaged or was not signed.
    Any ideas?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • HT1338 I want to download Mountain Lion but keep getting "the product distribution file could not be verified.  It may be damaged or was not signed.  What do I do?

    I want to download Mountain Lion but keep getting "the product distribution file could not be verified.  It may be damaged or was not signed.  What do I do?

  • When i click on a song to plat or drag it to a playlist an exclaimation appears next to it . a message says , could not be used because the ori ginal file could not be found. does anyone know how to fix this problemn?

    When i click on a song to play or drag it to a playlist an exclaimation mark appears next to it. a message says , could not be used because the original file could not be found. does anyone know how to fix this problem?

    1. delete this songs from your liblary
    2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary

  • "! The song [...] could not be used becuz the org'l file could not be found

    ERROR MESSAGE: "! The song [...] could not be used because the original file could not be found. Would you like to locate it?"
    Uh, YES. The song is already there and why are you not recoginizing it, iTunes? What automation can I possible enable to get rid of this message so that iTunes actually sees my MPEGS and does not require me to manually browse to the file which is already there?

    You'll need to help iTunes locate the files for you then reacquaint your library with your files. Here are some articles that can help you:
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    This article may also be helpful:
    Instructions for finding missing music and video downloads
    http://support.apple.com/kb/TS1408

  • Since i download the new version of i tunes i canot play the songs of my library...it say that "the song could not be used because the original file could not be found" what i do to just play the songs directly? please someone help

    since i download the new version of i tunes i canot play the songs of my library....it say "the song could not be used because the original file could not be found".
    would you like to locate it.i just want to play directly..what i do?  please help  thanks

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • When I try to download a book from IBooks I get the message"Your Purchase Could Not be Completed"  What can I do?

    When I try to download a book from IBooks I get the message "your PUrchase Could Not be Completed"  I've gotten books downloaded before, but not since the most recent OS upgrade to 7.0.4

    Contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Lightroom all of a sudden says "This file could not be found"?

    This happened over night and I don't know what to do about it?

    Photos aren't contained in the catalog, their locations and adjustment settings are, but the photos themselves are just on the hard-drive, somewhere.  If something else, outside of LR deleted those photos or moved them, then LR wouldn't know that, and indicate they are missing.
    Are the photos still on your hard-drive or not?  And what is an example path where LR thinks they should be?
    Are they in a different location on the hard-drive than they used to be?
    When you Import photos into LR it remembers where they are, but if you do something to them outside of LR, not using LR's Folder Panel, then it will still expect them to be at the Import location, and if they are not, then you'll see question marks or exclamation points with a message about them not being where they originally were.
    One mistake that could have been made, is that you imported photos into a LR catalog and that catalog remembers them one place, then you opened a new LR catalog and did a Move import, which would move them some other location and they'd be remembered in that second catalog correctly, but not in the first catalog, anymore.  If you only have one LR catalog then this is probably not what happened.

  • HT1364 when I click on consolidate files I get a message that says "Copying files failed. The required file could not be found" what does this mean?

    I've been encountering problems with this from the beginning, when I realized that my iTunes media folder was engulfing most of my storage. I bought an external drive, followed all the steps, and since then I've lost 1 movie and several songs, and now I've lost some magical file that means I can't move anything now. The files are still on my computer (I moved them back after losing the movie and songs) and I can't move the media files. It does create the folders for me all the way down to the artist and album BUT when I open that last folder it shows me NOTHING! please help this is incredibly frustrating.

    1. delete this songs from your liblary
    2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary

  • Error Message: The data provider required to connect to the local data file could not be found. The file will be added to the project but the typed DataSet associated with the file will ont be generated.

    I am currently taking the course "C# Fundamentals" from Bob Tabors site:  LearnVisualStudio.NET .  I'm on day 8 where we are integrating SQL Server with C#.  In Lesson 6 and 7, (havent' gotten past these two) I am having an
    issue.  In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title.  I cannot get the db to appear in the Solution
    Explorer, or open up so I can create a table.  When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program.  Even
    though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
    exactly what I need to do.  Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job.  Any help would be appreciated. 
    JennyBarrett7

    Hi
    According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
    Change Data Source dialog. If not, you need to install
    SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
    Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
    http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
    However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, you can review the following link:
    Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
    Thanks
    Lydia Zhang

  • I download itunes64 but when it is validating the installation, I get the message that "itunes64msi could not be found" and nothing I have done, nor looked in has resolved this problem. Could you help me please????

    http://C:\Users\Ashley\AppData\Local\Apple\Apple Software Update\
    'C:\Users\Ashley\AppData\Local\Apple\Apple Software Update\i Tunes64.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package "iTunes64.msi" in a folder from which you can install the product iTunes.   I cannot find my old copy of iTunes on my computer now. The only thing in the iTunes folder is the written rules.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for