CFBuilder, CF10 (multihoming) and admin services

Hi folks,
I am setting up a development server with 2 instances of coldfusion running (cfusion + instance0)
I was wondering if anyone has been able to get the admin services working when cf instances are set up in a multihoming arrangement?
I have looked through the CFBuilder documentation and it seems to be skewed towards CF9 and Jrun. I am able to add the servers in CFBuilder and have it correctly report the current status, but if I try to stop, start or restart a server from CFBuilder nothing happens.
I initially tried to get it working with just the default cfusion instance and when I tried to stop, start or restart I would get an error in the cfbuilder server console
Error(11/21 at 03:06:01) Cannot perform the operation. Admin server for the remote server 192.168.0.10 is not running.
After looking around the web (I can't remember who posted the info, but thanks!) I found that I needed to comment out the host node in the {CFHome}/cfusion/jetty/etc/jetty.xml file.
<Call name="addConnector">
      <Arg>
          <New class="org.mortbay.jetty.bio.SocketConnector">
            
            <Set name="port"><SystemProperty name="jetty.port" default="8985"/></Set>
            <Set name="maxIdleTime">50000</Set>
            <Set name="lowResourceMaxIdleTime">1500</Set>
          </New>
      </Arg>
    </Call>
After that I created a second ColdFusion instance and then added it to the servers view in CFBuilder neither of my servers can be stopped, started or restarted via the IDE.
Does anyone have any suggestions?
Thanks,
Simon

How can I confirm that the admin service have been installed? Is there a file I can check for or something in an xml file somewhere? I have another server that I'd like to try, but can't remember if I said yes to the admin services.
If you see
#Remote Component Administrator Credentials
JETTY_USERNAME=
JETTY_PASSWORD=
JETTY_PASSWORD_CONFIRM=
in the log does that mean it should be installed?
Cheers,
Simon

Similar Messages

Native essbase and admin services

My users are only using Essbase, the AAS Console, and the Excel Add in. It dosn't make much sense to install any additional Hyperion components if they are not used. As a result, I'm considering installing a native version of Essbase 9.3.1. and Admin Services without Shared Services or any other Hyperion components. Is this a viable option considering the lack of use of the other Hyperion products?
If I do this, would I be able to use the Configuration Utility to configure relational storage and start the application server deployment for Admin Services without registering it to Shared Services?
Thanks,
Tom

Hi,
It is certainly possible to use essbase and eas in native mode, I take it you are not going to be using planning or business rules.
You can use the configuration wizard to deploy the application server and configure the database. You could also install and configure shared services but not use it and then if you did ever want to use it you can just convert from native to shared services security mode.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase admin server is not responding in 11.1.2.2 and related services ??

Hi All,
I've installed & configured Hyperion 11.1.2.2. When i entered admin & password in EAS console, the message is displaying as Essbase Administration server is not responding. Can you pls. let me know, what is the service for Essbase Admin services. Also when i'm trying the link http://servername:9000/interop, page not found is displaying. Is it must that Hyperion Configuration Manager service should be up & running ? Where i can find the service for shared services ? where i can find all the related services of different hyperion products. Thanks in advance for the help
Thanks,
PVR

If you have deployed all the web applications to a single managed server then there will be one service to start the web apps - "Hyperion EPM Server - Web Application"
You can tell in the configurator if you have deployed the web apps to a single managed server and - http://2.bp.blogspot.com/-vhvxHXJ6C18/T4Wa0iSeW8I/AAAAAAAAEfg/v7ktkUIqmug/s1600/image023.png
The default port is 9000, if you are still having problems then it is worth checking the logs.
Cheers
John
http://john-goodwin.blogspot.com/

Configure the ADMIN and CLUSTER service connections to be SSL

Can you configure the ADMIN and CLUSTER service connections to be SSL
rather than tcp?
I was wondering about the present or future ability to secure other
connection services with SSL. Can you now or are there future plans
to configure the ADMIN and CLUSTER service connections to be SSL
rather than tcp? I suppose I should add the PORTMAPPER to that list.
My primary interest is for an SSLCLUSTER service in the case where
two brokers are connected over a non-trusted network. It may
not be too difficult to secure all the services the same way, but
perhaps that is on the TODO list.
A related question is if there are plans to add SSL with client
authentication as a stronger authentication mechanism than 'simple'
username and password. I believe you could get the username from
the client certificate's DN and continue to use the same LDAP user
repository for access control. I think this is similar to the way
that BEA's Weblogic server does it.
Finally should it be possible to deploy the HTTP tunnel servlet to
a webserver (such as iPlanet Web Server) configured to do SSL with
client authentication as a work-around to get stronger authentication
with the current release of the product? Or am I perhaps missing some
obvious and important detail? :) I guess I would like to know it's been
done already or is at least possible before I try and do it myself.

3 scenarios involving SSL are:
1: JMS client <------- SSL -------> iMQ broker
2: iMQ admin <------- SSL -------> iMQ broker
3: iMQ broker <------- SSL -------> iMQ broker (i.e clusters)
(1) is currently supported in iMQ 2.0
(2) and (3) is not supported in iMQ 2.0. No concrete plans yet to support
it in the near future but we'll definitely consider doing it if we
hear a lot of demand for it.
]A related question is if there are plans to add SSL with client
]authentication as a stronger authentication mechanism than 'simple'
]username and password. I believe you could get the username from
]the client certificate's DN and continue to use the same LDAP user
]repository for access control. I think this is similar to the way
]that BEA's Weblogic server does it.
This is on our todo list, but due to other more pressing issues we
have not been able to address it. We will continue to keep it
on our potential list of new features.
Sorry if I sound pretty wishy-washy in my responses above, but the fact
is that the things you mentioned above had to take a backseat
to other more critical features. That and the usual time/resource
constraints caused them not to be implemented.
]Finally should it be possible to deploy the HTTP tunnel servlet to
]a webserver (such as iPlanet Web Server) configured to do SSL with
]client authentication as a work-around to get stronger authentication
]with the current release of the product? Or am I perhaps missing some
]obvious and important detail? :) I guess I would like to know it's been
]done already or is at least possible before I try and do it myself.
Yes, this should be possible (although I don't believe we've tried it here).
The client authentication here is really only between the JMS client and the
web server (not between the tunnel servlet and the iMQ broker) and should
be similar in setup to any other java application talking to iPlanet Web
Server.

Impossible to unlock network-admin, services, users and groups

Hi all,
it is impossible to unlock network-admin, services, users and groups in gnome.
Suggestions or ideas?
Thanks in advance
Greets

alessandro_ufms wrote:
xaiviax wrote:Just fyi, rebuilding system-tools-backends with ABS does not fix issue for me.
Are you put your login user on group stb-admin, put stbd in DAEMONS on rc.conf and restart the computer?
yes, although didn't have stbd in DAEMONS before (worked fine), still didn't fix issue. Been watching this thread, just downgraded package again, works great. I'd rather not downgrade on principal, but that the only thing that works for me currently, so...

Deploy wsp through Power Shell- start stop SP admin service and run execadmsvcjobs command using power shell

Hi,
Can anyone pls point me any link/ src code for deplyoing wsp using power shell. I know I can deploy it through Add-spsolution and install-spsolution, the issue is that, it will give "status - stuck in deploying scheduled..."
and i need to restart the sharepoint services - services.msc --> SP administration and timer services - and then i need to run the exceadmsvcjobs command to deploy / update the wsp successfully in solution store.
i mean, whats the power shell equivalent of these tasks. or anyone has already scripted these.
if i elaborate little bit, would like to know how to automatically Retract, Remove, Add and Deploy SharePoint 2010 WSP Solution Files with PowerShell

ok, i have found the same :
here its : hope this will help someone.
function wait4timer($solutionName)
$solutionName ="TestingWSP.wsp"
$solution = Get-SPSolution | where-object {$_.Name -eq $solutionName}
if ($solution -ne $null)
Write-Host "Waiting to finish soultion timer job" -ForegroundColor Green
while ($solution.JobExists -eq $true )
Write-Host "Please wait...Either a Retraction/Deployment is happening" -ForegroundColor DarkYellow
sleep 5
Write-Host "Finished the solution timer job" -ForegroundColor Green
try
# Get the WebApplicationURL
$MyWebApplicationUrl = "http://srvr:21778/";
# Get the Solution Name
$MywspName = "TestingWSP.wsp"
# Get the Path of the Solution
$MywspFullPath = "D:\myWorkspace\TestingWSP.wsp"
# Try to get the Installed Solutions on the Farm.
$MyInstalledSolution = Get-SPSolution | Where-Object Name -eq $MywspName
# Verify whether the Solution is installed on the Target Web Application
if($MyInstalledSolution -ne $null)
if($MyInstalledSolution.DeployedWebApplications.Count -gt 0)
wait4timer($MywspName)
# Solution is installed in atleast one WebApplication. Hence, uninstall from all the web applications.
# We need to unInstall from all the WebApplicaiton. If not, it will throw error while Removing the solution
Uninstall-SPSolution $MywspName -AllWebApplications:$true -confirm:$false
# Wait till the Timer jobs to Complete
wait4timer($MywspName)
Write-Host "Remove the Solution from the Farm" -ForegroundColor Green
# Remove the Solution from the Farm
Remove-SPSolution $MywspName -Confirm:$false
sleep 5
else
wait4timer($MywspName)
# Solution not deployed on any of the Web Application. Go ahead and Remove the Solution from the Farm
Remove-SPSolution $MywspName -Confirm:$false
sleep 3
wait4timer($MywspName)
# Add Solution to the Farm
Add-SPSolution -LiteralPath "$MywspFullPath"
# Install Solution to the WebApplication
#Install-SPSolution -Identity <SolutionName> -WebApplication <URLName> [-GACDeployment] [-CASPolicies]
install-spsolution -Identity $MywspName -WebApplication $MyWebApplicationUrl -GACDeployment #-FullTrustBinDeployment:$true -GACDeployment:$false -Force:$true
# Let the Timer Jobs get finishes
wait4timer($MywspName)
Write-Host "Successfully Deployed to the WebApplication" -ForegroundColor Green
catch
Write-Host "Exception Occuerd on DeployWSP : " $Error[0].Exception.Message -ForegroundColor Red
ref :
http://www.sharepointpals.com/post/How-to-Deploy-a-SharePoint-2013-Solution-(WSP)-in-the-Farm-using-PowerShell

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

Itunes and Admin tool do not see Airport on Windows XP

I tried to make an airport express work with my IBM T42P laptop with Windows XP work.
Neither the Airport Admin utility or Itunes detect the Airport Express. The strange thing though is, that I can see it in the wireless connections. I can even connect to it and use the network, ping the airport express etc... Didn't tryout routing, but connecting to another computer on the network works fine also... But still, Airpot Admin utility and Itunes cannot see anything.
The Airport Setup Assistant lists the airport, but times-out and cannot connect to it.
Tried to connect from another laptop and everything worked fine, so I figured maybe it's a problem with the builtin wi-fi on the t42. Tried the wifi card from the working laptop on the t42 and still same problem.
The Windows XP is with SP2.
Checked Wireless Zero Configuration Service version numbers: All are 5.1.2600.2180
The firewall has port 5353 UDP open. Additionally itunes and the admin tool are added to the firewall - also tried to stop the firewall service.
From the other laptop flashed the Airport Express with firmware-upgrade and upgraded airport express software on th t42.
Tried to switch of QOS and other services in the network settings.
At some point, tried to connect through ethernet and couldn't see the Airport. Could have been a problem with the rest of the network though. Connecting through the admin tool when choosing other and providing the ip-address of the airport is possible, but doesn't help itunes...
Nothing helped, so to summarize:
On the old T20 with Windows 2000 everything works fine.
The T42 can wifi-connect to the network, but neither itunes nor admin-utility can see the thing. The Airport Setup Assistant lists the airport, but times-out and cannot connect to it. Can't "Identify" either.
Any suggestions would be appreciated!
Thomas

To eliminate connectivity issues - cable the PC's ethernet port directly to the ethernet port of the Airport Express. If the Airport Admin Utility fails to list your Airport Express...
I know you said you stopped the firewall service... but the problem you are having is, in the vast majority of cases, because there is indeed still a firewall running on the PC - either the one built into Windows XP, and/or the one provided by third-party software, and/or the one installed by VPN client software.

Not able to deploy HumanTask and Decision service using ant file

Hi all,
I am using ant file to complile and deploy a bpel process. Currently i am able to compile the bpel process and deploy it. But when it come to deploying humantask and decesion services I am getting a message.
[deployDecisionServices] There are no decision services to deploy
[deployTaskForm] There are no forms to deploy
Kindly guide me out of this issue
below is my ant file
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="bpel.deploy" default="AuthorizeCreditRequestApproval" basedir=".">
<property name="process.dir" value="..\SVNCopy\Code}"/>

<xmlproperty file="${process.dir}\AuthorizeCreditAS\bpel\bpel.xml"/>
<property environment="env"/>

<condition property="bpel.home" value="${env.BPEL_HOME}">
<available file="ant-orabpel.xml"/>
</condition>

<property name="bpel.home" value="${oracle.home}/integration/bpel"/>

<property file="build.properties"/>

<import file="ant-orabpel.xml"/>

<property file="ant-orabpel.properties"/>
<target name="AuthorizeCreditRequestApproval" depends="CheckCustomerMarketSegment">
<echo>
| Deploying workflow form for AuthorizeCredit on ${j2ee.hostname}, port ${http.port}
</echo>
<deployTaskForm
platform="${platform}" dir="../SVNCopy/Code/ManageCustomerCreditEligibility/AuthorizeCreditBS/public_html"
domain="${domain}" process= "AuthorizeCreditBS" rev="${rev}"
user="${admin.user}" password="${admin.password}"
hostname="${j2ee.hostname}" cluster="${cluster}"
rmiport="${rmi.port}" opmnrequestport="${opmn.requestport}"
oc4jinstancename="${oc4jinstancename}"
asinstancename="${asinstancename}" verbose="${verbose}"
/>
</target>
<target name="CheckCustomerMarketSegment" depends="compileAuthorizeCredit">
<echo>
| Deploying decision services for AuthorizeCredit on ${j2ee.hostname}, port ${http.port}
</echo>
<deployDecisionServices
platform="${platform}" dir="../SVNCopy/Code/AuthorizeCredit/decisionservices"
domain="${domain}" process="AuthorizeCredit" rev="${rev}"
user="${admin.user}" password="${admin.password}"
hostname="${j2ee.hostname}" httpport="${http.port}"
cluster="${cluster}" rmiport="${rmi.port}"
opmnrequestport="${opmn.requestport}" oc4jinstancename="${oc4jinstancename}"
asinstancename="${asinstancename}" verbose="${verbose}"
/>
</target>
<target name="compileAuthorizeCredit" depends="checkout">
<echo> --- | Compiling bpel process AuthorizeCreditBS| ---
</echo>
<bpelc input="../SVNCopy/Code/AuthorizeCredit/bpel/bpel.xml"
out="../SVNCopy/Code/AuthorizeCredit/output" rev="${rev}"
home="${bpel.home}"/>
<echo> --- | AuthorizeCredit Compiled Successfully, revision ${rev}| ---
</echo>
</target>
</project>
Edited by: Arun Vikram on Mar 4, 2010 10:45 PM

Is there any workflow or decision service in ur bpel???
if present,...the ant is not getting ../SVNCopy/Code/AuthorizeCredit/decisionservices and ../SVNCopy/Code/ManageCustomerCreditEligibility/AuthorizeCreditBS/public_html folders.
Edited by: krish.chaitnya on Mar 4, 2010 11:20 PM

System Admin and Admin Problem...

Can any one tells me the different between system admin and admin?
It seems like system admin is messing up my file permissions, and it seems like system admin has more control than the admin (me)...
I had this experience today: everytime when I create a folder, the permission's gone under "system", I was not able to have any folder action nor create a new folder under it.
I search the forum with solutions and I think I've fixed it and it works fine now, but the permission is still not under my account name; it goes under "root" (system Admin).
Any one has a solution for this?
And how can I delete the system admin account?
Thanks,
Arnold

I input dscacheutil -q user in terminal, and I got this:
Would it help to solve my problem? :P I'm wondering if anyone has the same problem too?
name: _amavisd
password: *
uid: 83
gid: 83
dir: /var/virusmails
shell: /bin/tcsh
gecos: Amavisd User
name: _appowner
password: *
uid: 87
gid: 87
dir: /var/empty
shell: /usr/bin/false
gecos: Application Owner
name: _appserver
password: *
uid: 79
gid: 79
dir: /var/empty
shell: /usr/bin/false
gecos: Application Server
name: _ard
password: *
uid: 67
gid: 67
dir: /var/empty
shell: /usr/bin/false
gecos: Apple Remote Desktop
name: _atsserver
password: *
uid: 97
gid: 97
dir: /var/empty
shell: /usr/bin/false
gecos: ATS Server
name: _calendar
password: *
uid: 93
gid: 93
dir: /var/empty
shell: /usr/bin/false
gecos: Calendar
name: _clamav
password: *
uid: 82
gid: 82
dir: /var/virusmails
shell: /bin/tcsh
gecos: Clamav User
name: _cvs
password: *
uid: 72
gid: 72
dir: /var/empty
shell: /usr/bin/false
gecos: CVS Server
name: _cyrus
password: *
uid: 77
gid: 6
dir: /var/imap
shell: /usr/bin/false
gecos: Cyrus IMAP User
name: _devdocs
password: *
uid: 59
gid: 59
dir: /var/empty
shell: /usr/bin/false
gecos: Developer Documentation
name: _eppc
password: *
uid: 71
gid: 71
dir: /var/empty
shell: /usr/bin/false
gecos: Apple Events User
name: _installer
password: *
uid: 96
gid: -2
dir: /var/empty
shell: /usr/bin/false
gecos: Installer
name: _jabber
password: *
uid: 84
gid: 84
dir: /var/empty
shell: /usr/bin/false
gecos: Jabber User
name: _lp
password: *
uid: 26
gid: 26
dir: /var/spool/cups
shell: /usr/bin/false
gecos: Printing Services
name: _mailman
password: *
uid: 78
gid: 78
dir: /var/empty
shell: /usr/bin/false
gecos: Mailman user
name: _mcxalr
password: *
uid: 54
gid: 54
dir: /var/empty
shell: /usr/bin/false
gecos: MCX AppLaunch
name: _mdnsresponder
password: *
uid: 65
gid: 65
dir: /var/empty
shell: /usr/bin/false
gecos: mDNSResponder
name: _mysql
password: *
uid: 74
gid: 74
dir: /var/empty
shell: /usr/bin/false
gecos: MySQL Server
name: _pcastagent
password: *
uid: 55
gid: 55
dir: /var/pcast/agent
shell: /usr/bin/false
gecos: Podcast Producer Agent
name: _pcastserver
password: *
uid: 56
gid: 56
dir: /var/pcast/server
shell: /usr/bin/false
gecos: Podcast Producer Server
name: _postfix
password: *
uid: 27
gid: 27
dir: /var/spool/postfix
shell: /usr/bin/false
gecos: Postfix User
name: _qtss
password: *
uid: 76
gid: 76
dir: /var/empty
shell: /usr/bin/false
gecos: QuickTime Streaming Server
name: _sandbox
password: *
uid: 60
gid: 60
dir: /var/empty
shell: /usr/bin/false
gecos: Seatbelt
name: _securityagent
password: *
uid: 92
gid: 92
dir: /var/empty
shell: /usr/bin/false
gecos: SecurityAgent
name: _serialnumberd
password: *
uid: 58
gid: 58
dir: /var/empty
shell: /usr/bin/false
gecos: Serial Number Daemon
name: _spotlight
password: *
uid: 89
gid: 89
dir: /var/empty
shell: /usr/bin/false
gecos: Spotlight
name: _sshd
password: *
uid: 75
gid: 75
dir: /var/empty
shell: /usr/bin/false
gecos: sshd Privilege separation
name: _svn
password: *
uid: 73
gid: 73
dir: /var/empty
shell: /usr/bin/false
gecos: SVN Server
name: _teamsserver
password: *
uid: 94
gid: 94
dir: /var/teamsserver
shell: /usr/bin/false
gecos: TeamsServer
name: _tokend
password: *
uid: 91
gid: 91
dir: /var/empty
shell: /usr/bin/false
gecos: Token Daemon
name: _unknown
password: *
uid: 99
gid: 99
dir: /var/empty
shell: /usr/bin/false
gecos: Unknown User
name: updatesharing
password: *
uid: 95
gid: -2
dir: /var/empty
shell: /usr/bin/false
gecos: Update Sharing
name: _uucp
password: *
uid: 4
gid: 4
dir: /var/spool/uucp
shell: /usr/sbin/uucico
gecos: Unix to Unix Copy Protocol
name: _windowserver
password: *
uid: 88
gid: 88
dir: /var/empty
shell: /usr/bin/false
gecos: WindowServer
name: _www
password: *
uid: 70
gid: 70
dir: /Library/WebServer
shell: /usr/bin/false
gecos: World Wide Web Server
name: _xgridagent
password: *
uid: 86
gid: 86
dir: /var/xgrid/agent
shell: /usr/bin/false
gecos: Xgrid Agent
name: _xgridcontroller
password: *
uid: 85
gid: 85
dir: /var/xgrid/controller
shell: /usr/bin/false
gecos: Xgrid Controller
name: chowmein
password: ******
uid: 501
gid: 501
dir: /Users/chowmein
shell: /bin/bash
gecos: Arnold Chow
name: daemon
password: *
uid: 1
gid: 1
dir: /var/root
shell: /usr/bin/false
gecos: System Services
name: nobody
password: *
uid: -2
gid: -2
dir: /var/empty
shell: /usr/bin/false
gecos: Unprivileged User
name: root
password: ******
uid: 0
gid: 0
dir: /var/root
shell: /bin/sh
gecos: System Administrator

Problem in Accessing Admin services using users other than administrator

Hi,
I am working on SAP MII 12.1. I have a reuirement to get list of users for a particular role from the system for display in a dropdown. I am using the URL :
/XMII/Illuminator?Service=admin&mode=UserList&Group=[Param.1]&Content-Type=text/xml
But I am getting error while logging through a different user (user who does not have Administrator role).
I tried to call this url as aXML query, through transaction and also through web service, but it's showing following error:
You do not have permission to access service Admin
Please let me know how can I use this url for any user who does not have administrator role.
Thanks,
Anubhuti

Hi,
The problem got resolved by giving the role privileges to access the Admin services through UME. Earlier I couldn't find the way to provide this access in 12.1.
Thanks,
Anubhuti

TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES

제품 : SQL*NET
작성날짜 : 2002-11-24
TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES
(GENERATING TRACE FILE OF SQL*NET, NET8.X, AND NET SERVICES)
==========================================================
PURPOSE
이 글은 고객들이 Oracle Server의 Oracle Networking 제품들을 사용하다가
Networking과 관련된 문제를 만났으나 스스로 해결할 수 없는 경우, 예를
들어 http://metalink.oracle.com 에서 같은 case를 발견할 수 없는 경우,
원인을 찾기 위하여 Networking 제품의 trace를 떠 보는 방법을 설명합니다.
Explanation
Oracle Networking 제품을 사용 중에 어떠한 문제를 겪는 경우 무엇보다도
OS의 Networking Protocol Stack 쪽을 살펴보는 것이 선행되어야 합니다.
일부 고객분들은 Oracle Networking 제품들이 OS의 Protocol Stack이 동작
하는데 어떤 중대한 영향을 주는 것이 아닌가 하고 문의를 합니다만
그러한 의문은 Oracle Networking 제품도 OS의 Protocol Stack을 사용하는
하나의 network client라는 것을 이해함으로써 해소가 됩니다.
Oracle Networking 제품도 OS의 Protocol Stack을 이용하는 하나의 network
client이기 때문에 Oracle Networking 제품이 OS Protocol Stack의 동작에
어떠한 식으로든 영향을 준다던가 하는 것은 있을 수 없기 때문입니다.
고객의 관점에서 OS의 Protocol Stack은 정상적으로 설정이 되었다고 믿고
있으며 기타 networking 환경을 정확히 판단할 수 없는, 예를 들어
host설정은 잘 되어 있다고 믿고 있으나 firewall을 통해야만 하는 등의
다소 접근하기 어려운 networking 환경에서 networking이 잘 되지 않는,
예를 들어, Oracle Server에 연결이 잘 안되거나 연결 중 networking
error가 발생하는 경우에는 http://metalink.oracle.com에서 같은 case를
찾는 것이 가장 빠른 해결 방법입니다.
그러나 드물게 http://metalink.oracle.com에서 같은 case가 나오지 않는
경우 Oracle Networking 제품의 trace file을 떠서 원인을 찾게 됩니다.
Oracle Networking 제품은 Oracle 7.x에서 SQL*Net, Oracle 8.x에서 Net 8.x,
Oracle 9.x에서 Oracle Net Services라는 이름이 가지고 있으나 여기에서는
편의상 모두 Oracle Networking 제품으로 부르도록 하겠습니다.
아울러 여기서 언급하는 Trace File은 Oracle Server의 Trace File과
다른 것입니다. Oracle Server의 Trace File은 database instance의 대한
내용만을 기록하며 Oracle Networking 제품의 Trace File은 networking에
대한 내용만을 기록합니다.
Trace File의 작성 방법은 Oracle 7.x부터 9.x까지 같습니다.
Solution Description
1. Client가 되는 host에서 어떠한 문제를 경험한 경우, 간혹 문제의 발생
빈도가 낮거나 network나 server 쪽에 이상을 느끼시면서도 문제를 확인하기
여러운 경우가 있습니다. 이런 경우엔는 문제가 다시 발생될 때 까지
Client에서 Client Trace File를 작성하여 보아야 합니다.
a. prompt$ echo $TNS_ADMIN
b. $TNS_ADMIN이 설정되어 있으면, prompt$ cd $TNS_ADMIN
아니면, prompt$ cd $ORACLE_HOME/network/admin
c. vi sqlnet.ora
# 다음 line들을 추가
TRACE_LEVEL_client=16
TRACE_FILE_client=<filename>
TRACE_DIRECTORY_client=<directory>
TRACE_UNIQUE_client=TRUE
:wq
prompt$
예를 들어, client가 Windows OS인 경우 다음과 같이 합니다.
prompt> notepad sqlnet.ora
TRACE_LEVEL_client=16
TRACE_FILE_client=client
TRACE_DIRECTORY_client=D:\temp
TRACE_UNIQUE_client=TRUE
prompt>
d. SQL*Plus와 같은, 또는 사용하던 Client software를 계속 이용
e. 다시 문제가 발생
f. 작성된 trace file들의 날자를 보아 문제가 발생한 시간과
거의 같은 시간에 작성된 file들이 있는지 확인
prompt> dir D:\temp
client_<PID1>.trc ...
client_<PID2>.trc ...
prompt>
g. trace를 중단합니다.
prompt$ vi sqlnet.ora
TRACE_LEVEL_client=0
:wq
prompt$
h. Trace Assistant를 이용하여 Oracle Networking 제품의 error code
(이하 TNS error code)를 trace file에서 찾아냅니다.
prompt$ cd <directory of TRACE_DIRECTORY_client>
prompt$ trcasst <filename of TRACE_FILE_client>_<PID>.trc > trcasst.out
prompt$ vi -R trcasst.out
Trace Assistant (trcasst command)는 Oracle 8.x부터 제공되며,
Oracle 9.x의 Trace Assistant를 사용할 것을 권합니다.
i. oerr command로 tns error에 대한 error message를 봅니다.
예를 들어, 흔한 경우 중에 listener가 실행 중이지 않거나 잘못된
tnsnames.ora 설정으로 client가 listener가 service 중이지 않은
network address로 연결을 시도하다가 TNS-12541 TNS-12560 TNS-511
error가 차례대로 나왔다면 다음과 같이 하여 각 TNS error code에
대한 message와 설명 및 해결방법을 볼 수 있습니다.
prompt$ oerr tns 12541
prompt$ oerr tns 12560
prompt$ oerr tns 511
j. Trace Assistant가 알려준 TNS error code를 http://metalink.oracle.com
에서 검색하여 같은 case가 있는지 확인합니다.
Web browser에서:
1) Go to http://metalink.oracle.com, then login
오른쪽 위 HTML frame에서 :
2) "Advanced" Button을 누릅니다.
오른쪽 아래 HTML frame에서:
3) "Enter Keyword" text box에 tns error code를 모두 입력합니다.
예를 들어, tns-12541 tns-12560 tns-511
4) "Search" button을 누릅니다.
k. http://metalink.oracle.com에서 검색이 거의 되지 않거나
문제가 매우 이상한 경우 이 글 아래를 보시기 바랍니다.
2. Client에서 SQL*Plus나 Oracle Client를 사용하는 다른 3rd party
appliction은 잘 동작하나 유독 tnsping command에서 error가 나는 경우가
드물게 있습니다. 이 때에는 tnsping command의 trace file을 작성해봅니다.
prompt$ vi sqlnet.ora
TNSPING_TRACE_LEVEL=16
TNSPING_TRACE_DIRECTORY=<directory>
:wq
prompt$ tnsping <tns alias>
3. Server, 즉 listener에 문제가 있다고 생각되는 경우 우선 listener의
log file을 봅니다. listener의 log에 대해서는 bulletin.18364를
이용합니다.
4. listener의 trace file은 다음과 같이 설정합니다.
listener의 trace 설정은 parameter 이름에 trace file을 작성하고자 하는
listener의 이름이 오는 점, 설정 후 listener process를 restart해야 하는
점 두 가지를 제외하면 나머지 절차가 앞서 설명드린 client와 같습니다.
prompt$ vi listener.ora
TRACE_LEVEL_<listener name>=16
TRACE_FILE_<listener name>=<filename>
TRACE_DIRECTORY_<listener name>=<directory>
:wq
prompt$ lsnrctl stop <listener name>
prompt$ lsnrctl start <listener name>
5. 만일 위와 같이 http://metalink.oracle.com을 검색하여도
같은 case가 전혀 없거나 찾아낸 error message들이 원인과 관련이 없어
보일정도로 매우 이상한 경우 다음과 같이 해봅니다.
a. Oracle Software의 version과 OS의 version이 certification matrix에
있는 지 확인합니다.
Web browser에서:
1) Go to http://metalink.oracle.com, then login
왼쪽 menu에서 :
2) "Certify & Availabilty" menu item을 click합니다.
오른쪽 아래 HTML frame에서:
3) 현재 사용중인 Product와 그 version 및 OS와 그 version을 선택하
여 검색합니다.
Certification Matrix는 매우 정확하게 정보를 보여주고 있습니다.
Matrix에 없는 Oracle Product와 OS version은 certify되어 있지 않으며
모든 Oracle 제품을 Certify되지 않은 OS version에서 사용하는 것은
그 어떠한 이유로든 보증과 지원이 되지 않습니다.
만일 사용중인 제품이 certify되지 않은 경우, 무조건 certify된 제품
과 OS의 version으로 install하여 다시 시도를 해야 합니다.
예를 들어, Windows OS의 경우 그 어떠한 Oracle 제품도 Windows Me 및
Windows XP Home Edition에 certify되어 있지 않습니다.
Windows 2000 Professional 이상에 Certify된 제품은 Oracle 8.1.6부터
이며 XP Professional 이상에 Certify된 제품은 Oracle 9.0.1부터
입니다.
Oracle 제품은 software이기는 하나 매우 완벽한 수준의 제품이라고 할
수 있습니다. 그러나 Oracle 제품은 하나의 OS의 process로써 실행이
되고 시간이 지나며 많은 환경이 major upgrade가 되면서 그러한 환경
에 따라 Oracle software도 새로운 version으로 제작이 되면서 다시
certification이 이루어지게 됩니다.
그렇기 때문에 고객들은 특히 다수의 client나 고가의 server를 계획하
시는 고객들은 저희 certification matrix를 사전에 철저히 확인하셔야
합니다.
앞서 Certification Matrix이전에 Installation Guide에 명시된
OS version만이 certify되어 있다고 생각하시면 되겠습니다.
b. Unix에서는 Oracle Software를 install한 후 OS의 Networking patch를
씌우고 사용하다보면 문제가 되는 경우가 있습니다.
이런 경우 relink를 해주어 바뀐 OS환경에서 Oracle 실행 file들을 다
시 만들어 주어야 합니다.
자세한 내용은 http://metalink.oracle.com에서
다음 글을 읽어 보시기 바랍니다.
Note:131321.1 How to Relink Oracle Database Software on UNIX
c. Certify된 환경에서도 원인을 찾을 수 없는 경우 trace file을 가지고
Oracle Support Services에 문의를 합니다. (지원 계약 고객에 한함)
Reference Documents
Chapter 17 Trouble shooting Oracle Net Services
Oracle 9i Net Services Administrator's Guide
SQL*Net, Net8.x, Net Services 9.x Network Administration Guide/Reference

제품 : SQL*NET
작성날짜 : 2002-11-24
TROUBLE SHOOTING PROBLEM ON SQL*NET, NET8.X, AND NET SERVICES
(GENERATING TRACE FILE OF SQL*NET, NET8.X, AND NET SERVICES)
==========================================================
PURPOSE
이 글은 고객들이 Oracle Server의 Oracle Networking 제품들을 사용하다가
Networking과 관련된 문제를 만났으나 스스로 해결할 수 없는 경우, 예를
들어 http://metalink.oracle.com 에서 같은 case를 발견할 수 없는 경우,
원인을 찾기 위하여 Networking 제품의 trace를 떠 보는 방법을 설명합니다.
Explanation
Oracle Networking 제품을 사용 중에 어떠한 문제를 겪는 경우 무엇보다도
OS의 Networking Protocol Stack 쪽을 살펴보는 것이 선행되어야 합니다.
일부 고객분들은 Oracle Networking 제품들이 OS의 Protocol Stack이 동작
하는데 어떤 중대한 영향을 주는 것이 아닌가 하고 문의를 합니다만
그러한 의문은 Oracle Networking 제품도 OS의 Protocol Stack을 사용하는
하나의 network client라는 것을 이해함으로써 해소가 됩니다.
Oracle Networking 제품도 OS의 Protocol Stack을 이용하는 하나의 network
client이기 때문에 Oracle Networking 제품이 OS Protocol Stack의 동작에
어떠한 식으로든 영향을 준다던가 하는 것은 있을 수 없기 때문입니다.
고객의 관점에서 OS의 Protocol Stack은 정상적으로 설정이 되었다고 믿고
있으며 기타 networking 환경을 정확히 판단할 수 없는, 예를 들어
host설정은 잘 되어 있다고 믿고 있으나 firewall을 통해야만 하는 등의
다소 접근하기 어려운 networking 환경에서 networking이 잘 되지 않는,
예를 들어, Oracle Server에 연결이 잘 안되거나 연결 중 networking
error가 발생하는 경우에는 http://metalink.oracle.com에서 같은 case를
찾는 것이 가장 빠른 해결 방법입니다.
그러나 드물게 http://metalink.oracle.com에서 같은 case가 나오지 않는
경우 Oracle Networking 제품의 trace file을 떠서 원인을 찾게 됩니다.
Oracle Networking 제품은 Oracle 7.x에서 SQL*Net, Oracle 8.x에서 Net 8.x,
Oracle 9.x에서 Oracle Net Services라는 이름이 가지고 있으나 여기에서는
편의상 모두 Oracle Networking 제품으로 부르도록 하겠습니다.
아울러 여기서 언급하는 Trace File은 Oracle Server의 Trace File과
다른 것입니다. Oracle Server의 Trace File은 database instance의 대한
내용만을 기록하며 Oracle Networking 제품의 Trace File은 networking에
대한 내용만을 기록합니다.
Trace File의 작성 방법은 Oracle 7.x부터 9.x까지 같습니다.
Solution Description
1. Client가 되는 host에서 어떠한 문제를 경험한 경우, 간혹 문제의 발생
빈도가 낮거나 network나 server 쪽에 이상을 느끼시면서도 문제를 확인하기
여러운 경우가 있습니다. 이런 경우엔는 문제가 다시 발생될 때 까지
Client에서 Client Trace File를 작성하여 보아야 합니다.
a. prompt$ echo $TNS_ADMIN
b. $TNS_ADMIN이 설정되어 있으면, prompt$ cd $TNS_ADMIN
아니면, prompt$ cd $ORACLE_HOME/network/admin
c. vi sqlnet.ora
# 다음 line들을 추가
TRACE_LEVEL_client=16
TRACE_FILE_client=<filename>
TRACE_DIRECTORY_client=<directory>
TRACE_UNIQUE_client=TRUE
:wq
prompt$
예를 들어, client가 Windows OS인 경우 다음과 같이 합니다.
prompt> notepad sqlnet.ora
TRACE_LEVEL_client=16
TRACE_FILE_client=client
TRACE_DIRECTORY_client=D:\temp
TRACE_UNIQUE_client=TRUE
prompt>
d. SQL*Plus와 같은, 또는 사용하던 Client software를 계속 이용
e. 다시 문제가 발생
f. 작성된 trace file들의 날자를 보아 문제가 발생한 시간과
거의 같은 시간에 작성된 file들이 있는지 확인
prompt> dir D:\temp
client_<PID1>.trc ...
client_<PID2>.trc ...
prompt>
g. trace를 중단합니다.
prompt$ vi sqlnet.ora
TRACE_LEVEL_client=0
:wq
prompt$
h. Trace Assistant를 이용하여 Oracle Networking 제품의 error code
(이하 TNS error code)를 trace file에서 찾아냅니다.
prompt$ cd <directory of TRACE_DIRECTORY_client>
prompt$ trcasst <filename of TRACE_FILE_client>_<PID>.trc > trcasst.out
prompt$ vi -R trcasst.out
Trace Assistant (trcasst command)는 Oracle 8.x부터 제공되며,
Oracle 9.x의 Trace Assistant를 사용할 것을 권합니다.
i. oerr command로 tns error에 대한 error message를 봅니다.
예를 들어, 흔한 경우 중에 listener가 실행 중이지 않거나 잘못된
tnsnames.ora 설정으로 client가 listener가 service 중이지 않은
network address로 연결을 시도하다가 TNS-12541 TNS-12560 TNS-511
error가 차례대로 나왔다면 다음과 같이 하여 각 TNS error code에
대한 message와 설명 및 해결방법을 볼 수 있습니다.
prompt$ oerr tns 12541
prompt$ oerr tns 12560
prompt$ oerr tns 511
j. Trace Assistant가 알려준 TNS error code를 http://metalink.oracle.com
에서 검색하여 같은 case가 있는지 확인합니다.
Web browser에서:
1) Go to http://metalink.oracle.com, then login
오른쪽 위 HTML frame에서 :
2) "Advanced" Button을 누릅니다.
오른쪽 아래 HTML frame에서:
3) "Enter Keyword" text box에 tns error code를 모두 입력합니다.
예를 들어, tns-12541 tns-12560 tns-511
4) "Search" button을 누릅니다.
k. http://metalink.oracle.com에서 검색이 거의 되지 않거나
문제가 매우 이상한 경우 이 글 아래를 보시기 바랍니다.
2. Client에서 SQL*Plus나 Oracle Client를 사용하는 다른 3rd party
appliction은 잘 동작하나 유독 tnsping command에서 error가 나는 경우가
드물게 있습니다. 이 때에는 tnsping command의 trace file을 작성해봅니다.
prompt$ vi sqlnet.ora
TNSPING_TRACE_LEVEL=16
TNSPING_TRACE_DIRECTORY=<directory>
:wq
prompt$ tnsping <tns alias>
3. Server, 즉 listener에 문제가 있다고 생각되는 경우 우선 listener의
log file을 봅니다. listener의 log에 대해서는 bulletin.18364를
이용합니다.
4. listener의 trace file은 다음과 같이 설정합니다.
listener의 trace 설정은 parameter 이름에 trace file을 작성하고자 하는
listener의 이름이 오는 점, 설정 후 listener process를 restart해야 하는
점 두 가지를 제외하면 나머지 절차가 앞서 설명드린 client와 같습니다.
prompt$ vi listener.ora
TRACE_LEVEL_<listener name>=16
TRACE_FILE_<listener name>=<filename>
TRACE_DIRECTORY_<listener name>=<directory>
:wq
prompt$ lsnrctl stop <listener name>
prompt$ lsnrctl start <listener name>
5. 만일 위와 같이 http://metalink.oracle.com을 검색하여도
같은 case가 전혀 없거나 찾아낸 error message들이 원인과 관련이 없어
보일정도로 매우 이상한 경우 다음과 같이 해봅니다.
a. Oracle Software의 version과 OS의 version이 certification matrix에
있는 지 확인합니다.
Web browser에서:
1) Go to http://metalink.oracle.com, then login
왼쪽 menu에서 :
2) "Certify & Availabilty" menu item을 click합니다.
오른쪽 아래 HTML frame에서:
3) 현재 사용중인 Product와 그 version 및 OS와 그 version을 선택하
여 검색합니다.
Certification Matrix는 매우 정확하게 정보를 보여주고 있습니다.
Matrix에 없는 Oracle Product와 OS version은 certify되어 있지 않으며
모든 Oracle 제품을 Certify되지 않은 OS version에서 사용하는 것은
그 어떠한 이유로든 보증과 지원이 되지 않습니다.
만일 사용중인 제품이 certify되지 않은 경우, 무조건 certify된 제품
과 OS의 version으로 install하여 다시 시도를 해야 합니다.
예를 들어, Windows OS의 경우 그 어떠한 Oracle 제품도 Windows Me 및
Windows XP Home Edition에 certify되어 있지 않습니다.
Windows 2000 Professional 이상에 Certify된 제품은 Oracle 8.1.6부터
이며 XP Professional 이상에 Certify된 제품은 Oracle 9.0.1부터
입니다.
Oracle 제품은 software이기는 하나 매우 완벽한 수준의 제품이라고 할
수 있습니다. 그러나 Oracle 제품은 하나의 OS의 process로써 실행이
되고 시간이 지나며 많은 환경이 major upgrade가 되면서 그러한 환경
에 따라 Oracle software도 새로운 version으로 제작이 되면서 다시
certification이 이루어지게 됩니다.
그렇기 때문에 고객들은 특히 다수의 client나 고가의 server를 계획하
시는 고객들은 저희 certification matrix를 사전에 철저히 확인하셔야
합니다.
앞서 Certification Matrix이전에 Installation Guide에 명시된
OS version만이 certify되어 있다고 생각하시면 되겠습니다.
b. Unix에서는 Oracle Software를 install한 후 OS의 Networking patch를
씌우고 사용하다보면 문제가 되는 경우가 있습니다.
이런 경우 relink를 해주어 바뀐 OS환경에서 Oracle 실행 file들을 다
시 만들어 주어야 합니다.
자세한 내용은 http://metalink.oracle.com에서
다음 글을 읽어 보시기 바랍니다.
Note:131321.1 How to Relink Oracle Database Software on UNIX
c. Certify된 환경에서도 원인을 찾을 수 없는 경우 trace file을 가지고
Oracle Support Services에 문의를 합니다. (지원 계약 고객에 한함)
Reference Documents
Chapter 17 Trouble shooting Oracle Net Services
Oracle 9i Net Services Administrator's Guide
SQL*Net, Net8.x, Net Services 9.x Network Administration Guide/Reference

Cannot Add Essbase Server From Admin Services Consol

Hi
I am trying to add a new essbase server to my Admin Services list. I get the following error message:
Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
Can anyone please help me to figure out what exactly is going wrong ?
Thanks
Mandar Joshi

Review the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
For default configurations ensure any firewall has the below ports opened from the client to the server:
TCP/1423
TCP/32768 through TCP/33768
Regards,
John

BPC 5.1 and Reporting Services on Shared, Corporate Server

We are implementing BPC 5.1 and want to integrate with Reporting Services on a shared, corporate server rather than installing on BPC app/web server. The reason is to minimize number of Reporting Services installations corporate wide. This has led to a number of challenges and questions, which I hope someone can assist with.
1. What level of access is needed by the three BPC service accounts to Reporting Services, during install and ongoing?
2. Can BPC be configured to point to a specific Reporting Services sub-directory, rather than having to browse the whole Reporting Services root?
3. Is there any documentation on BPC and Reporting Services?
Thank you. Nancy

You know there are 3 types of users who assigned to SysAdmin, Admin and user. Your SysAdmin user must have administrator rights of your corporate reporting server. Or that user must be user of "Content Manager" role in reporting service. Otherwise, you will get many errors by end of certain function of Admin console such as process security or process application.
And BPC is designed to use a reporting service exclusively. It is not designed to use a particular folder other than root.
I do not have idea about documents regarding reporting service of BPC.

Difference between portal component and portal service?

Hi I am kishore...
         I worked on portal components but not on portal services... Would anybody tell the difference between the portal components and portal services...? What is a portal service..?
           How we know which one to choose in the scenario.?
    Thanks in adavance

Hi kishore,
A portal component is custom Java code that is executed according to user requests, and generates HTML output for display on the client.
Portal components:
Page builder, which assembles pages
Admin tools, such as logger, which is comprised of user interface messages.
Pages
Technically, the page is also an iView. A page includes iViews or pages (nested) and Layout components
iViews
There are two different isolation levels (iView types)
Embedded: iViews html is embedded as part of page html. iViews are called synchronically on the server, and retrieved in one response, to the client (this is the page response).. Each iView reloading reloads all iViews on page.
URL (Isolated): iViews are fetched by an IFRAME element in an own request. One response for the page followed by additional request-response for each iView (depending on browser 2-4 requests simultaneously).
Portal Services:
A portal service is a component that offers a globally accessible function in the portal.
A portal service act as the middleware, that is, interfaces that are enabled to exchange procedures and data. They offer functionality to portal components, and other services.
There are two groups of portal services:
Portal services (part of the PRT)
Caching
Notification
iView service
Application Repository
System Landscape
Role, pages, worksets
Web Services
Unification service
Portal services (external to the PRT)
Client Eventing
URL generator
Logger
JCO client service
Hope this helps.
Regards
Atul Shrivastava

CFBuilder, CF10 (multihoming) and admin services

Similar Messages

Maybe you are looking for