Cfchart shows different output in 7.0.2 and 6.1

We had a upgrade of CF MX server from 6.1 to 7.0.2 recently
in an AIX platform. After the upgrade, CFCHART output is different
than the one from the previous version. Please see the code below.
BAR chart is shown as lines in new version that too with different
colors.
<html>
<body>
<cfchart Format="flash"
chartHeight="250"
chartWidth="400"
showXGridlines = "no"
showYGridlines = "yes"
gridlines="5"
xOffset="0"
yOffset="0"
dataBackgroundColor= "##CECFFF" showborder="no"
font="Arial"
fontsize="12" fontbold="no" fontitalic="no"
labelFormat = "currency"
show3D="yes" rotated="no" sortxaxis="no"
showlegend="no"
showmarkers="no"
backgroundColor = "##CECFFF">
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Jun" value="100">
</cfchartseries>
</cfchart>
<br>
<cfchart Format="flash"
chartHeight="250"
chartWidth="400"
showXGridlines = "no"
showYGridlines = "yes"
gridlines="5"
xOffset="0"
yOffset="0"
dataBackgroundColor= "##CECFFF" showborder="no"
font="Arial"
fontsize="12" fontbold="no" fontitalic="no"
labelFormat = "currency"
show3D="yes" rotated="no" sortxaxis="no"
showlegend="no"
showmarkers="no"
backgroundColor = "##CECFFF">
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 May" value="90">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Jun" value="70">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Jul" value="85">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 aug" value="100">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Sep" value="90">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Oct" value="70">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Nov" value="85">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2005 Dec" value="100">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Jan" value="90">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Feb" value="70">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Mar" value="85">
</cfchartseries>
<cfchartseries type="bar" paintstyle="raise"
markerstyle="rectangle">
<cfchartdata item="2006 Apr" value="100">
</cfchartseries>
</cfchart>
</body>
</html>

anchalgupta181988 wrote:
Is it possible to switch from iOS 7.0.2 to 6.1.3.
Sorry... No... Downgrading is not supported by Apple.
anchalgupta181988 wrote:
Since I have updated my IPhone 4 iOS 6.1.3 to 7.0.2, my iPhone has started to hang and the processing has become slow.
Try This...
Close All Open Apps... Sign Out of Your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Some Other Tips Here...
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

Similar Messages

Servlet is giving different output on JBuilder 2005(IDE) and on browser

Hi all
I am using JBuilder2005 for devloping servlets.
While I am executing the code on JBuilder itself..it's working out fine..
But when I am trying to use browser for calling a servlet...I am getting Different output..
Can Anyone tell me why is so..and where I have to make changes so that I can do the same from browser also
Thx
Vijay

What do u mean on JBuilder? The browser built-in to JBuilder? What are the different outputs?

Two same reports showing different output ??

Hi
Irregularity in two reports
I developed a vendor liabilities aging report with lfa1-lifnr not maindatory,
lfb1-bukrs obligatory , bsik-budat obligatory & report is working fine with
total & all months total are displayed . I want to display por org.
I added a new field LFM1-ekorg (Pur. Org ),
( no other table except lfm1 has ekorg field, link is using lifnr )
after that report is showing less lifnr and also month amount and total is varying.
I fetched lifnr, ekorg from lfm1 the for all entirs in bsik with lifnr equality & then
lifnr from lfa1.
I checked a database tables.
Why so ?? Please

Hi,
Well am not sure if i understood your question properly. May be its something to do with order of selection from the tables. If so try like this
select lifnr ekorg
from lfm1
into it_lfm1
where ekorg = p_ekorg.
select *
from bisk
into corresponding fields of it_bisk
for all entries in it_lfm1
where lifnr = it_lfm1-ekorg
bukrs in s_bukrs
budat in s_budat.
By this way you can use purchase organisation also in the report.
Regards,
Vik

Df and du showing different outputs on 5.8

hi all,
On 5.8 Solaris box, the df and du are showing around 20Mb space difference. the file systems are part of veritas cluster and showing 100% and 99% full.
bash-2.03$ uname -a
SunOS mybox 5.8 Generic_117350-38 sun4u sparc SUNW,Sun-Fire-880
will you suggest any known bug and a fix like path, please get back for any additional information.

these file systems belongs to oracle datafiles and there are many file system with the same status. i am also looking for any known bugs on df or du which can cause this issue.
can you infer any thing from this info....
bash-2.03$ df -k /ars/u01
Filesystem kbytes used avail capacity Mounted on
/dev/vx/dsk/remedydg/u01vol
6184960 6136477 45457 100% /ars/u01
bash-2.03$ du -k /ars/u01
0 /ars/u01/lost+found
6118499 /ars/u01/oradata/ARS
6118499 /ars/u01/oradata
6118499 /ars/u01
bash-2.03$ df -g /ars/u01
/ars/u01 (/dev/vx/dsk/remedydg/u01vol): 8192 block size 1024 frag size
12369920 total blocks 96966 free blocks 90914 available 12136 total files
12118 free files 65363856 filesys id
vxfs fstype 0x00000004 flag 255 filename length
bash-2.03$ /usr/lib/fs/vxfs/df -F vxfs -k /ars/u01
Filesystem kbytes used avail capacity mounted on
/dev/vx/dsk/remedydg/u01vol 6184960 6139503 45457 99% /ars/u01

WMIC - different output on English (non-localized) and non-English (localized) OS language

Hi, I have strange behavior when running WMIC script to get serial numbers of storage devices across network:
wmic /node:"w10","w16" /failfast:on diskdrive get model,serialnumber,description /format:list
and get different results:
C:\>wmic /node:"w10","w16" /failfast:on diskdrive get model,serialnumber,description /format:list
Description=Дисковый накопитель
Model=KINGSTON SV300S37A120G ATA Device - drive the same
SerialNumber=303532304236323741333830383143[HIDEBYME] <<< Russian language OS
Description=Disk drive
Model=KINGSTON SV300S37A120G - drive the same
SerialNumber=50026B[HIDEBYME] <<< English language OS
I check many of them, and it's for sure, that SerialNumber output depends of OS language.
If system are English, than we have SN, when not, we have something that 40 char lenght.
Maybe someone know, how to fix it? Thanks.
as is

WMIC is not a script. It is as ystemutility. You should post in the forum for your OS.
Language settings can affect everything. If a device is not designed t osupport languages then it may not report correctly. We cannot fix this in a script as it usually requiers low-level API calls.
If you use PowerShell you could change langauge to English when accessing that device.
¯\_(ツ)_/¯

PDF shows different security setting in Acrobat 8 and 9

Hi,
I have acrobat PDF document. While it opens using Acrobat 8 STD,
users are allowed to delete pages, but if using Acrobat 9 STD, users are
NOT allowed to delete pages.
In the security properties, Acrobat 8 shows changing in document allowed. but in Acrobat 9, changing in doc is not allowed.
Is it by designed or something went wrong?
Regards,
Han Lim

Can you post a link to the document?

Pages show differently in FF 3.5.3 and IE 7

Hi,
Since the first ever DW, I haven't had too much trouble with the different displays of a site by FF and IE however ...
I have a client who wants everything to be exact in both browsers and I am having great difficulty achieving this.
I understand without seeing the differences, one can't be explicit in giving answer, however what I am doing is not on line yet.
Are there overall basic reasons why things will look different even though they look fine in the workspace.
This way at least I can go check these basics.
Or does one have to actually see what I have done?
Sorry to be frugal with details, but if needed I will upload some pages.
Thanks
oz :-)

Differences in Browser rendering makes this almost impossible to achieve within pixel perfect precision. Forms are probably the biggest challenge for web designers because they look totally different in Safari, IE and FF...
That said, there are some things you can do to get your pages on a nearly level playing field -- everything John already told you, plus a couple more.
Add this to your CSS:
/** zeros out default browser values on everything**/
* {margin:0; padding:0; border:0; line-height:100%}
html,body {font-size:100%; height:100.2%; margin-bottom:1px; /**adds scrollbar in Mozilla**/}
/**For IE only**/
*body {font-size:76%; zoom: 1;}
The following basic page looks pretty similar in all the major browsers. But if you look close enough, you will find subtle differences.
http://alt-web.com/TEMPLATES/Basic-1-col-fixed.html
If everyone used the exact same browser and settings, web design would be too easy.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Different output running Report on server and running local

hi all
I have the following problem, running my report on development environment i have the desidered results, but running the same report with the same parameters on Web server side, I have no results.
Could you help me???
Thanks in advance
Antonio

Hi
Yes other reports work without these problems...
I think that the problem is the report parameter form, and the parameter report definition.... I think so, because, if I set the report execution parameter "paramform" to no, giving the same input execution values it functs as local, but if I set it to yes it doesn't work.
I'm trying to cancel report parameter form on the report and remake it, I'll let you know.
Thanks in advance
Antonio

The output values are showing different

Hi,
the infobject of 0FISCPER listcube output and the same infoobject is showing different values in query output . Some thing is problem in this infoobject . Can any one please give the solution i will award the points.
Regards
RK

Hi Rama krishnan,
Check the infocube contents for this field and Compare with the query result. if they are not matching then.
Use RSRT tcode to debug the Query and trace the value of 0FISCPER.
Note: Check the transformation (update rule) for 0FISCPER. see whether the automatic TIME-CONVERSION is used. it it is used then the system will convert the value.
this might help u.

Ad hoc query - Infoset, after selection it is giving two different output

Hi All,
We are facing problem in ad hoc query, after PQAH Ad hoc query, when we go to one infoset, so after making some selection and putting some output field,
When we click on refresh data button(in lower pane) so it gives only one record, which is incorrect, but when we click on u2018Start Outputu2019 button it gives 3 records those are correct.
Can anyone tell me, why this is giving different output.(first time 1 record, and second time 3 records) record 3 output is correct.
Regards,
Kumar
Edited by: kumar r12 on Mar 18, 2011 9:00 AM

Hi Kumar,
Are you looking at the "Hit List" or the output of the results in the lower pane? The hit list will only give you the number of persons who will be in your output. The refresh button should give you a preview of the output.
What persons or fields are different or not shown in the preview area vs. the output? Also, what are the dates for the data? Are you looking at current data or looking for history? The output may be showing you history and the preview only current data. Most concerns with Ad Hoc Query output are related to dates - for the selection and the output.
Paul

Web Part showing different result in different regions

Hi All,
We have a
stock web-part which is integrated into our SharePoint site . And this stock web-part is showing different result in different regions .As the output of the web-part is perfect in India,US,UK and working quite opposite in Singapore,china and Malaysia.Can
any one help me how can I solve the issue
Samar

Hi Samar,
As the stock web part is a custom web part, we cannot know how it works. For this issue, I suggest you ask the web part developers or support for help.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Problem with same Container for 2 different outputs

Hi,
I am using method set_table_for_first_display to display 2 different output with same container depending upon the selection of radio button. but the problem I am facing is when I click BACK button after dispaying second output and executing first output, it is showing prebious output only. is there any method to handle this problem?
Regards,
Nilanjana

Hi,
On clicking back use leave to screen 0 in the PAI module of the screen.
Call screen 100.
PROCESS BEFORE OUTPUT.
Logic
PROCESS AFTER INPUT.
MODULE USER_COMMAND.
MODULE USER_COMMAND INPUT.
IF sy-ucomm EQ 'User command defined for BACK button'.
LEAVE TO SCREEN 0. "Go back to selection screen
ENDIF.
END MODULE.
Have a look at the method FREE of class cl_gui_alv_grid.
eg:
CALL METHOD wcl_alvgrid1->free
EXCEPTIONS
    cntl_error        = 1
    cntl_system_error = 2
    OTHERS            = 3.
Thanks,
Vinod.

EMU-0404 USB: Using different outputs in abelton?

Hello Community,
Can I use different outputs for my tracks in abelton live. I want to root the master-track to one stereo output, and new tracks together to the other outputpair for headphones, to hear the track sperated and NOT on the master, but on the front headphone-out is the same signal as on the output on the back
When I start Abelton an configurate my in and outputs. I got 4 output-fields activated!
1 (mono) & 2 (mono) | 1/2 (stereo)
3 (mono) & 4 (mono) | 3/4 (stereo)
On the master track i mapped
Master out 1/2
Cue Out 3/4
If i press the headphone-button on a track i can se the signal in cue out 3/4 in the master track, but i cannot hear anything on the headphones. The EMU headphone out on front got the same signal as the outputs on the backside.
Which output gets the signal?

0404USB has 4 mono input ports and 4 mono output ports which are 2 analog and 2 digital ports.
As the headphone output DAC is shared with 2 analog outputs, you can't do what you're describing without routing the digital signal through some external D/A Converter using S/PDIF path.
IIRC. there's a picture in User's guide showing the signal paths for this device.
jutapa

Having Multiple Adobe PDF printers with different output settings

Hello,
My company is using Adobe Acrobat X and XI on Win 7 Pro, and we would like to create 2 separate Adobe PDF printers that have 2 different output settings. So I installed a second Adobe PDF printer using the same Adobe Converter Driver as was used to install the first one. Then, I went into Devices and Printers and I edited the printing preferences of one Adobe PDF printer, but what I found was when I changed the preferences of one printer, it automatically changes the other one as well. Is there a way around this?

Thanks for pointing me to the iTunes Folder Watch program. It looks like this will solve my immediate needs. It's a little clunky in spots, but does handle adding new files very well. And it only cost about $10 to get the fully functioning version with the automatic monitoring in the background.
I copied the iTunes library files to each account, setup a watch folder that points to the location of the iTunes library content and all the music syncs up perfectly without duplicates. I have yet to test the applications, but music, movies, TV Shows, audiobooks, and podcasts all work fine.
If anyone else is considering this product, just make sure you double check your file location in the iTune settings to make sure each account is pointing to the same location and is organizing the content in the same way or else the individual account libraries will fight against each other to organize all the content where it is configured to put it. Copying the library files isn't enough since some of these settings are in the Windows Registry.
I made this mistake at first. I had all the accounts pointing to the same folder, but one of them (the original) had the "Upgrade to iTunes Media Organization" turned on which categorizes all content into folders based on type such as music, movies, podcasts, etc. Since the others were organizing just based on artist and album this caused the accounts to try to reorganize the files when Folder Watcher would tell it there were new files to manage.
All in all, this solves most of my concerns, but I'm still surprised Apple hasen't added this natively into the iTunes product. Especially when this guy figured out how to write the software to do it and is only charging about 10 bucks to do it. Well I hope this guy makes a million bucks off his little product bacause he surely deserves it!

What does act/unsup mean in the "show vlan" output

I have 2 same switches with factory default configuration. I found that once those 2 switches are up, the show vlan output is different.
one of the switch shows active in the status column for the vlans 1002-1005, and the other switch shows act/unsup for same set of vlan.
I've delete the vlan.dat file and reboot but the problem is still there.
Why?
Can anyone tell me what is the meaning of act/unsup?

Hi,
The 'act/unsup' is stating that the switch doesn't support TR or FDDI vlans.
Check the versions of IOS on both switches to see if they match.
Regards,
Phil.

Cfchart shows different output in 7.0.2 and 6.1

Similar Messages

Maybe you are looking for