Cfhttpparam file post

I am working with the Brightcove API and I am using CFHTTP to send a video file. Brightcove takes the CFHTTP form post and takes the form of a file part, in a multipart/form-data HTTP request. I have had success with this post with any file < 90 MB. Anything over 90MB I get the below error. ===============================
Message [empty string]
StackTrace java.lang.OutOfMemoryError at java.io.FileInputStream.readBytes(Native Method) at java.io.FileInputStream.read(FileInputStream.java:177) at coldfusion.tagext.net.HttpTag.setFileName(HttpTag.java:1204) at coldfusion.tagext.net.HttpParamTag.doStartTag(HttpParamTag.java:200) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) etc...
ID: CFHTTPPARAM
===============================
This error happens immediately after I submit the form. No processing at all.
My question is there unwritten documentation that will not send a file size via this tag. When I look in detail to the error message, with the java.io.FileInputStream.readBytes(Native Method), there has to be something check the file size and shutting it down if it's to big. I have tried it on two different servers with the same results.
Heap Sizes in the Administrator are both set at 1024.
Any ideas or suggestions?
How about another suggestion to post a multipart/form-data HTTP request instead if using CFHTTP.
Thanks for you time! - R

aparab wrote:
In my Runtime-error step I also change the "Parameters.Step.Result.Status" to display my custom status .
Do i understand this sentence correctly if a state:
In your SequenceFilePostStepError callback, you change the status of the step calling into that callback because of a Runtime Error (Status: "Error") to the status "Failed"?
If so, it is expected behavior, no, it even is "works as intended".
You can use the TS API to disable the PostStepFailure callback, but you cannot enable this callback in the same step. So it would require an additional step for enabling the Failure-callback again which seems to makes things more complicated compared to NOT setting the step' result to "Failed"....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

Split line in File posted

Hi
I am facing rather a unique problem. I have a report that generates a file and posts it on the application server. When i open the file at the application server it shows me line split ( I mean a new line is introduced in the middle of a row).
On further investigation I observed that the field after which it split contains a # symbol. Now many files posted on the server contains # but this problem is not observed in any of those files.
I tried replicating this on quality and dev by adding # at run time in debug mode but the file posted is perfectly fine.
Please share your thoughts on this.
Preethi

Hi Preethi,
If you see the file on application server in AL11 instaed of sapce you can see there as #.
So in AL11 use MENU as
LIST--->SAVE/SEND-->FILE and select the file format (Txt,exce,.........etc)
See in the downloaded file wheather you are getting and #.
Regards,
Pravin

Animated gif issue in IE - files posted

Hi Linda (and others who would like to check this out),
I have posted the files I got from work.
They are at:
http://www.fayec.com/pngtest/animated3.png
http://www.fayec.com/pngtest/animated3.gif
You will see that the gif image plays perfectly in Mozilla
but has the
leftover slice to the right on IE.
The PNG will show that the slize is the same size as the
canvas so no
left space for that pixel to creep in.....
I truly don't understand that one.....
Thanks for any help,
FayeC

I don't know why IE will not behave but I found a way to make
it play nice.
On frame 2 create a rectangle that is the same size as the
image, give
it a fill of none and a border of 1 pixel, Hard Line, and
color of
#333333. If you make it totally black IE will misbehave.
alex
FayeC wrote:
> Hi Linda (and others who would like to check this out),
>
> I have posted the files I got from work.
> They are at:
>
http://www.fayec.com/pngtest/animated3.png
>
http://www.fayec.com/pngtest/animated3.gif
>
> You will see that the gif image plays perfectly in
Mozilla but has the
> leftover slice to the right on IE.
> The PNG will show that the slize is the same size as the
canvas so no
> left space for that pixel to creep in.....
> I truly don't understand that one.....
> Thanks for any help,
>
> FayeC

Issues in file posting in ftp folder

Hi
I am using a file to file scenario .There are 2 Files which is getting posted at the sender side.In RWB i can see the the sender communication channel picking up the 2 files properly.But Receiver communication channel shows only 1 file successfully posted the file in ftp folder,the 2nd file is not visible.It gets stuck in the queue with the error:The file is locked.How to solve this issue.

Hi Priya,
Check in your Runtime Workbench > Message Monitoring > Adapter Engine...
What is the Message Status? To Be Delivered (TBDL), Not Delivered (NDLV), Delivering (DLNG).........
Thank you
Diego Estanguini Gabriel

"Internal server Error" for file post request

client side
package example.fc;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import javax.microedition.io.Connector;
import javax.microedition.io.HttpConnection;
import javax.microedition.io.file.FileConnection;
import javax.microedition.lcdui.Alert;
import javax.microedition.lcdui.Display;
import javax.microedition.midlet.*;
* @author Sudipa
* @version
public class UploadMidlet extends MIDlet {
 String type;
 String url;
 String agent;
 String encodedData;
 HttpConnection conn;
 String boundary;
 Display display;
 public UploadMidlet()
 type=new String("image/png");
 url= new String("http://localhost:8086/test/Upload2.jsp");
 boundary = /*"---------------------------"+*/"--" + Long.toString(System.currentTimeMillis(), 16);
 public byte[] getData(String filename)
 { byte[] b=null;
 try{
 System.out.println("file://"+filename);
 FileConnection fc = (FileConnection)Connector.open("file://"+filename);
 if(!fc.exists()) {
 Alert alert=new Alert("File do not exist");
 alert.setTimeout(Alert.FOREVER);
 display.setCurrent(alert);
 InputStream is = fc.openInputStream();
 b= new byte[(int)fc.fileSize()];
 int length = is.read(b, 0, (int)fc.fileSize());
 System.out.println
 ("Content of "+filename + ": "+ new String(b, 0, length));
 } catch (Exception e) {
 Alert alert=new Alert(e.getMessage());
 alert.setTimeout(Alert.FOREVER);
 display.setCurrent(alert);
 finally{
 return b;
// Enumeration filelist = fc.list("*", true);
 public void startApp() {
 String filename=new String(/*"C:/WTK25/appdb/DefaultColorPhone/filesystem"+*/"/root1/photos/_suite_8.png");
 display=Display.getDisplay(this);
 try {
 encodedData=new String(getData(filename));
 conn = (HttpConnection) Connector.open( url,Connector.READ_WRITE );
 conn.setRequestMethod( HttpConnection.POST );
// conn.setRequestProperty( "User-Agent", agent );
 conn.setRequestProperty( "Content-Type", type );
 conn.setRequestProperty( "Content-Length",new Integer(encodedData.length()).toString());
 OutputStream os = conn.openOutputStream();
 System.out.println("success");
 String HeaderStr=boundary+new String(" Content-Disposition: form-data; name=\"uname\" fsdgfs ")+boundary+new String(" Content-Disposition: form-data; name=\"upfile\"; filename=\""+filename+"\" Content-Type: image/png");
 String FooterStr=new String(" ")+boundary+new String("--")+new String("\r\n");
 System.out.println((HeaderStr+""+ encodedData.trim()+FooterStr).getBytes());
 os.write((HeaderStr+""+ encodedData+FooterStr).getBytes());
 os.close();
 int rc = conn.getResponseCode();
 } catch (IOException ex) {
 Alert alert=new Alert(ex.getMessage());
 alert.setTimeout(Alert.FOREVER);
 display.setCurrent(alert);
 public void pauseApp() {
 public void destroyApp(boolean unconditional) {
}server side
<%@page import="java.io.File,java.io.IOException,java.lang.String,java.util.Iterator,java.util.List,javax.servlet.ServletException,javax.servlet.http.HttpServlet,javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse,org.apache.commons.fileupload.DiskFileUpload,org.apache.commons.fileupload.FileItem,org.apache.commons.fileupload.FileItemFactory,org.apache.commons.fileupload.FileUpload,org.apache.commons.fileupload.FileUploadException,smpp.*"%>
<%@page pageEncoding="UTF-8"%>
<%
//byte[] reqStr=new byte[request.getContentLength()];
//request.getInputStream().read(reqStr);
//out.write(new String(reqStr));
String httpstr;
smpp.CommonFunction com;
try{
com=new CommonFunction();
FileUpload fup=new FileUpload();
boolean isMultipart = FileUpload.isMultipartContent(request);
// Create a new file upload handler
DiskFileUpload upload = new DiskFileUpload();
// Parse the request
List /* FileItem */ items = upload.parseRequest(request);
Iterator iter = items.iterator();
while (iter.hasNext()) {
FileItem item = (FileItem) iter.next();
out.write(item.getName());
if (item.isFormField()) {
else
File cfile=new File(item.getName());
File tosave=new File(getServletContext().getRealPath("/WEB-INF/Upload"),cfile.getName());
item.write(tosave);
if (tosave.length()>0)
{httpstr=new String(tosave.getAbsolutePath()+"========,-09====="+com.readFile(tosave.getAbsolutePath())+"\n\n"+"request");
reqStr=new byte[request.getContentLength()];
request.getInputStream().read(reqStr);
out.write(httpstr+new String(reqStr));
}catch(Exception e){System.out.println(e);}
%>

This may be because your browser is caching the page. You might have had an error previously, fixed it but the browser still loads the old page first untill you explicitly tell it to refresh.

Junk chars in the file posted on application server

HI All,
I am posting a file on the application server using the OPEN DATASET, TRANSFER, CLOSE DATASET commands.
The file is posted successfully but it contains junk characters like # and some box kind of character. The file that has the data doesnot have these junk characters.
Help me resolve this problem.
Thanks in advance.

this is my code...
Open the file in the application server
OPEN DATASET l_filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
Convert workarea to string type
CALL METHOD CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
    EXPORTING
      IM_VALUE               = ls_jhak
    IMPORTING
      EX_CONTAINER           = l_file
    EXCEPTIONS
      ILLEGAL_PARAMETER_TYPE = 1
      OTHERS                 = 2.
Transfer the data fetched into the file
TRANSFER l_file TO l_filename.
ELSE.
RETURN.
ENDIF.
Close the file in the application server
CLOSE DATASET l_filename.

File posting to SAP directories

Hi Experts,
In my scenario I have to post files to the SAP directories, in AL11. my scenario is a file to file . can you please guide me in this regard, like what adapter I should use and what are the related configurations are required.
Thanks
Viny

Hi,
Use file adapter at both sender and receiver with file transport protocol - NFS.
Tcode: /nsxda_tools
Object type: DXPROJECT
Test Type: Load Data
Project type: BAPI
Program: CREATE
Click on Copy
Source: Select Presentation Server---> FileName (Source file)
Target: Select Application Server--> File Type (P Physical file name) ---> File Name (Target dir of Appl Server)
Regards,
Abid

All files posting as created or modified at 12:00 a.m.

Sorry - don't know the appropriate category where this question should be posted. But since I've installed Leopard, all my downloaded files show as being created at 12:00 am. (Word documents, PDFs, anything!) Clearly this is not the case. Any suggestions? Seems this is a default setting that needs to be booted out! Thanks for any help.

Yes, but did you check your present IP, or the last one?
I'm also wondering if it could have anything to do iwth the fact that I have very big inboxes & sent mail boxes.
Not likely.
Wasn't sure if rebuilding my mailboxes might help - my mail program isn't finding files properly either.
Not likely to do with the sending problem, but...
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Blojsom server doesn't recognize .mp3 files posted from an XP machine.

Strange things happening recently: When I log into the 10.4 server (using it for podcasts only, not blogs) it no longer recognizes .mp3 files when I post from my XP SP2 machine using either IE7 or Firefox. (It used to work just fine about a month ago.)
Using the same exact mp3 file(s) I am able to post them from a Mac or Vista machine.
Any ideas? This is just strange...

Hi blindfred, to stop Firefox from playing MPEG-encoded media in a page or in a stand-alone tab on Windows Vista/7/8, you need to change the following preferences:
(1) In a new tab, type or paste about:config in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste media. and pause while the list is filtered
(3) Double-click media.windows-media-foundation.enabled to switch its value from true to false. (This is the standard method for Windows Vista/7/8)
(4) Double-click media.directshow.enabled to switch its value from true to false. (This is an additional method available on Windows XP/Vista/7/8)

Can't open pdf files posted in Facebook

Instead of getting a dialogue box with the option to save the file I get redirected to a blank page. https://attachment.fbsbx.com/file_download.php?id=392022847530027&uid=1283073931&ext=13461 22360&hash=ASv7l5CiUPpVW0JI
I have updated Adobe reader and Firefox. I have also tried disabling my anti virus, pop up blocker and firewall with no luck. This happens with both my PC (Windows Vista) and Mac. I have tried 3 different browsers as well. I haven't had problems opening pdf files from other sites and other members of my FB group have been able to open the files successfully. Please help.

It appears that you are not being given a direct link to download the pdf file, but the site is running a script (.php) to handle downloading the file in question. When this happens there is no interaction from Reader until the script properly runs. Since there is no file you can download yet, saving as target will not work. The script has to run to provide you with the download. Are you running any extension that prevents the running of scripts? What happens if you try Safari or Internet Explorer?

Seq File Post Step Runtime Error and Failure

Hi,
I am using SequenceFilePostStepRuntimeError   &    SequenceFilePostStepFailure
in my seq file to handle both.
the issue at hand is that, once there is error the execution runs to runtime-error (SequenceFilePostStepRuntimeError) thats fine then again i run my Test-Step & error is generated & it again jumps to runtime-error { Test-Step is a Pass/Failtest}
but after that it jumps to SequenceFilePostStepFailure. I want to avoid this. can I reset the flag which says that no PostStepFailure ?.
    In my Runtime-error step I also change the "Parameters.Step.Result.Status" to display my custom status .

aparab wrote:
    In my Runtime-error step I also change the "Parameters.Step.Result.Status" to display my custom status .
Do i understand this sentence correctly if a state:
In your SequenceFilePostStepError callback, you change the status of the step calling into that callback because of a Runtime Error (Status: "Error") to the status "Failed"?
If so, it is expected behavior, no, it even is "works as intended".
You can use the TS API to disable the PostStepFailure callback, but you cannot enable this callback in the same step. So it would require an additional step for enabling the Failure-callback again which seems to makes things more complicated compared to NOT setting the step' result to "Failed"....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Converting raw files post editing

I'm new to iPhoto as I usually use Photoshop CS4...after my hard drive was replaced, CS4 would not run.
Soooooooo
After I edit a RAW file in iPhoto, how do I convert it to jpeg for sharing, storage, printing, etc?

To add to what Larry said:
The Raw workflow is like this:
Import a Raw. It's copied in as a byte by byte copy. Then a Jpeg Preview is made automatically.
Why the preview? As you know, you can't really do much with a Raw - print it, use it in a slideshow or in a document - so iPhoto creates the preview so the shot is available in other apps immediately.
When you edit the Raw your decisions are recorded in the iPhoto Database, your Raw file is untouched - just like any photo in iPhoto. The Prevew is updated with your new decisions.
If you then share the file via the Media Browsers etc, it's the Preview that get shared. You can print it from iPhoto.
Other than that you can then export it in a variety of formats - Jpeg, Tiff, Png for more varied options. You do this via the File -> Export command. This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
As for storing: it's stored in the iPhoto Library and permanently available.
The difference at heart here is that CS4, which you're used to, works as a file editor. iPhoto works as a non-destructive photo processor.

10g Questions - Folder structure, Files, Post-migration Scripts

Hi, Oracle Pros
I have a few questions that I have encountered in my 10g installation process. I hope I could get some help from you.
1- After I have installed 10g (release 2) software AND Enterprise Manager (release 1), I have noticed the installation has arranged the folders under 'Oracle' differently in my Windows 2003 Server. For example, I have two 'oradata' folders; one (EM) is right under the root 'oracle'; the other one (10g) under 'product > 10g'.
We'd like to re-arrange those folders to make it consistent and make more sense. Would this re-arrangement of folders affect applying patches later? I assume the way the install arranges the folders is following the OFA. That's why I am afraid to re-arrange folders after the install.
2- Does one use p-file or sp-file to start a database? I understand one can create one from the other. Does using either make any difference? If so, how?
3- I was told that after the software is said and done, not only do we need to import our 8i datafiles, but also write some script for the user, grant, tablesspace to be migrated as well. Is writing script for those objects really necessary? Why can't the OUI take care of all that?
I'd appreciate any of your help.
Have a good day.
CJ

2- Does one use p-file or sp-file to start a
database? I understand one can create one from the
other. Does using either make any difference? If so,
how?Either one.
The issue with PFILE is that it must be available to the DBA running the STARTUP command - on that DBA's platform. If you have multiple DBAs and possibly permit remote administration, there is a danger that you will have several PFILEs that are not in sync.
Because of this, Oracle created the SPFILE concep. It ensures there is only one natural initialization file, and that file is under the control of the server. It can be backed up by RMAN, it can be used by RAC instances, etc.
After kicking and screamiung at the change, I have become quite happy using SPFILE only - except for those increasingly rare non-dynamic parameter changes.

Recovering Keynote files post unexpected quitting.

I need help recovering a Keynote project. The program unexpectedly quit and the file was not manually saved. How/where does a file being worked on get saved by Keynote? Any help out there. (If it happened on my PC I'd be OK - help me through my conversion.)

Oh then you are not going to like this. Keynote does not have an automatic save.
Mireille

Connect the music file with the artwork file post-computer-crash?

I want to retrieve artwork after restoring my computer?
So my computer (where itunes app data was stored) and my external hardrive (where my itunes library was stored) crashed, but luckily I had my itunes library was stored on dropbox so I have that uploading to my revived computer!
I have access to all my "old computer's" files (via a mounted image file that looks just like an external drive H: )
The "old computer" itunes used my dropbox folder for the library (J:work\Dropbox\Allen's Transfer Folder\iTunes)
my "New comuter" uses a local folder but the contents are exactly the same (C:\Companies\Dropbox\Allen's Transfer Folder\iTunes)
How can I get the artwork data from my "old computer" onto my "new computer" so that itunes will connect the music file with the artwork file?
is there a data file and will they automatically sync to the artwork if they are in different locations?
Thank you for your help, Allen

pfanzier wrote:
… is there any reason i shouldn't delete the artwork folder?
All of my music is from CDs, so all of my cover art are scanned images that I added to the music files in iTunes. My Album Artwork folder is heavily populated nonetheless. Thus, it stands to reason that if you delete the folder, just like every other default item in your iTunes folder it will be recreated when you launch iTunes. If I recall correctly, that folder also holds the data files for building your CoverFlow.
pfanzier wrote:
itunes only demarcates songs whose files are missing with an exclamation point after i click on the song. otherwise everything appears as normal. if i quit itunes and reopen it, nothing is marked with the exclamation point until i click on it.
I personally have never had an issue with missing song links, but based on what I had read on the Macworld forums over the years, when links are lost, people start seeing /!\ next to several tracks in their iTunes library. Of course, most of the instances that I have read about have been after iTunes updates so perhaps it is during the library updating after a software update that causes the automatic detection of broken links. Otherwise, it does make sense that iTunes would not check a link until the user selects an unlinked song, because iTunes does not, and should not, scan your entire library for no apparent reason.

Cfhttpparam file post

Similar Messages

Maybe you are looking for