Cfinput datefield gives wrong display in IE6 IE7

With CF8, I try cfform=html with cfinput type=datefield. When
I use 2 input dates, and click on the calendar image, the opened
calendar window appears behind the second cfinput. You can check
the result here :
datefiled.pdf
The code is quite simple :
<cfform action = "cfinput.cfm">
<p> </p>
<cfinput type="datefield" name="MyDate1"
firstDayOfWeek="1">
<p> </p><p> </p>
<cfinput type="datefield" name="MyDate2"
firstDayOfWeek="1">
<p> </p>
<input type="Submit" name = "" value="Submit">
</cfform>
The display problem appears in IE6 and IE7, but not in
Firefox. Is this a bug, or any workaround is already know ?
Thanks.
Firmus.

<input type="Submit" name = "" value="Submit">
corrected to: <input type="Submit" name = "sbmt"
value="Submit">
> Is this a bug
Seems so. You should report it.
i suspect the likely cause to be the z-index value.
Z-index
is a CSS property. It determines one element's stack order in front
of or behind another. An element with a higher z-index will be
stacked in front of one with a lower value. The default value is 0,
for example, in the case where you don't specify the z-index.
To see the relevance to your case, open in Internet Explorer
a page containing just the form. View the source code. The
Coldfusion engine has automatically arranged the HTML within the
form into two main DIV blocks, each containing other DIVs. You will
notice that neither of the two main DIV blocks has z-index in its
style attribute. It means that they have the same z-index value,
namely, the default value 0.
The calender image at the top has the same z-index value as
the input field at the bottom, namely, the default value 0. One
would naturally expect that order of appearance would be the
deciding factor. Apparently, order of appearance is important in
Mozilla but not in Internet Explorer. It seems that, if two
elements have the same z-index, Internet Explorer may show the
second one in front of the first.
>... any workaround ...
Yes, here is one:
<cfform action = "cfinput.cfm">
<div class="df1" style="position:relative;">
<p> </p>
<cfinput type="datefield" name="MyDate1"
firstDayOfWeek="1">
</div>
<div class="df2" style="position:relative;z-index:-1;">
<p> </p><p> </p>
<cfinput type="datefield" name="MyDate2"
firstDayOfWeek="1">
</div>
<div class="sbmt">
<p> </p>
<cfinput type="Submit" name = "sbmt" value="Submit">
</div>
</cfform>

Similar Messages

  • CALCULATE_TAX_ITEM gives wrong values for Scess and HScess in PO Print

    Dear Friends,
    I am working with PO Print in smartforms hare the Fm CALCULATE_TAX_ITEM is gives wrong values for Scess and HEcess if I put the Gate pass (Basic Excise Duty) Manually.
    And one more Issue is as if I check any line item condition taxes than imediatly when I see the print the all line items Scee and HEcess displays same which I have saw.
    If there is a single line item in PO than there is no issue any way.
    kindly suggest to resolve the issue.
    Regards,
    D Tarun Kumar

    Hi,
    I had the same issue, that taxes on invoice tab of PO was not printed correctly on PO form by calling CALCULATE_TAX_ITEM.
    If you want to have the same tax value as komp-mwsbp, that use following form routine call before FB CALCULATE_TAX_ITEM.
    perform j_1b_save_tax_fields(saplmepo) using ekko ekpo lfa1.
    This is used in transaction me23n also.
    Kind regards,
    Tülay

  • Wrong display

    I give an example, you can put this example into SQL Developer's SQL worksheet:
    rem i think one's shoe must
    select 'E' from dual;
    It looks like below is a string:
    's shoe must
    select '
    I think if there is 'REM' in the line head, the character color should be grey. Doing that can void this wrong display.

    You can use /* */ for multiple line comments and -- for single line comments.
    Sue

  • Problem displaying in IE6

    I have a page that I can't get to display correctly in IE6, it displays fine in IE7 and IE8 and FF.
    In IE6 there is an extra margin on the right side of the page within the main container.
    I am new to web design and have been pulling my hair out trying to correct this so any help would be greatly appreciated.
    here is the page http://www.kaukaunaclinic.com/services.html
    Thanks,
    Jane

    Strange...
    I can think of a hack: Have an intermediate html page that gets displayed first anytime the display type (html/xls) is changed. Just a blank html page with a redirect that directs to the source you really want to display.
    Should be transparent, and it should clear up your problem as you described it.

  • 0CRM_OPPT_H  (Transaction RSA3 gives wrong result)

    Hi gurus,
    <b>0CRM_OPPT_H  (Transaction RSA3 gives wrong result)
    BBPCRM 4.0
    BW 3.50 version</b>
    I had enhanced the structure "crmt_bw_oppt_h"
    and also written a BADI to populate Opportunity header status.
    But when I run extract checker RSA3 for CRM data,
    I get wrong number of records.
    I am having 95 records for Opportunities header data.
    Data Records / Call = "100"
    Display Extr. Calls = "10"
    Above settings, I am retrieving only 61 records.
    <b>Data Records / Call = "1"
    Display Extr. Calls = "200"
    For the above settings in RSA3,
    I am able to retrieve 95 records correctly.</b>
    The problem is that in RSA1 transaction of BW 3.50 server also,
    61 records are being loaded from CRM server.
    <b>Could this be a Cache memory problem,
    Are any of my BASIS settings a cause for this problem?</b>
    Any help is really appreciated and will be rewarded.
    Thanks,
    Aby Jacob
    ========

    Dear Friends,
    <b>I had to do a small correction in my BADI code.
    I got a solution from Online SAP HELP portal.</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf4940e11d295df0000e82de14a/frameset.htm
    Notes on BADI Usage
    ====================
    The instance generated through the factory method should be declared
    as globally as possible or generally be passed as a parameter
    to ensure that the initialization process must be run as rarely as possible
    – just once would be best. In no case should you discard the instance as soon as
    it is generated or repeatedly run the initialization process in a loop.
    Within the adapter class interface,
    required database accesses are buffered locally,
    so that each access is executed once only.
    However, repeated initialization makes
    the buffer useless and dramatically reduces performance.
    Due to the local buffering, you can call Business-Add-In methods
    without having to expect considerable performance restrictions,
    even if no active implementations exist.
    Also, if the definition of the Business-Add-In is filter-dependent,
    a single instance is sufficient.
    However, you should not do without initialization altogether.
    Even if you could call static methods of the implementing
    class of the Business-Add-In implementation without an instance,
    you would lose the benefit of performance improvement through
    the Business-Add-Ins and the possibility of multiple use.
    If you switch the method type in the interface from the static method
    to the instance method at any time in the future,
    many code adjustments are required.
    In addition, you can no longer use default code that is provided.
    <b>Many Thanks to ROBIN
    and the whole SDN team</b>
    Aby Jacob ,,,,,

  • Problem with cfwindow and cfinput datefield

    If you have a cfform that contains a cfinput type datefield that is displayed in a cfwindow there is a problem when you scroll the cfwindow.
    That is if the form content causes the cfwindow to have scroll bar when you scroll the cfinput datefield stays where it is while the rest of the form scrolls with the window.
    Does anyone have any idea how to fix this.
    The code being used is as follows
    <cfwindow
         width="800"
            height="200"
            name="myWindow"
            center="true"
            title="Test Window"
            modal="true"
            initshow="true">
            <br>
            <cfform name="mycfform1">
                <div style="float:left;">Date 1: </div>
                <cfinput type="datefield" name="mydate1"><br><br><br>
                <div style="float:left;">Date 2: </div>
                <cfinput type="datefield" name="mydate2" value="15/1/2007"><br><br><br>
                <div style="float:left;">Date 3: </div>
                <cfinput type="datefield" name="mydate3" required="yes"><br><br><br>
                <div style="float:left;">Date 4: </div>
                <cfinput type="datefield" name="mydate4" required="no"><br><br><br>
                <br>
                <div style="float:left;">Date 1: </div>
                <cfinput type="datefield" name="mydate5" mask="dd/mm/yyyy">
                    (dd/mm/yyyy)<br><br><br>
                <div style="float:left;">Date 2: </div>
                <cfinput type="datefield" name="mydate6" mask="mm/dd/yyyy">
                    (mm/dd/yyyy)<br><br><br>
                <div style="float:left;">Date 3: </div>
                <cfinput type="datefield" name="mydate7" mask="d/m/yy">
                    (d/m/yy)<br><br><br>
                <div style="float:left;">Date 4: </div>
                <cfinput type="datefield" name="mydate8" mask="m/d/yy">
                    (m/d/yy)<br><br><br>
            </cfform>
    </cfwindow>

    -Fernis,
    Thanks for your help.
    I know IE 7 is a problem, not using this one.
    I'm actually using 8.0.6
    I will need to do more research, maybe it's my doc type.
    Anyway, thanks for testing.
    Ken

  • Wireless keyboard gives wrong letters

    wireless keyboard gives wrong letters

    [shameful mode on]
    Sorry. I don't have my Mac in front of me.
    I'm using windows right now.
    [shameful mode off]

  • Webpage is not displaying correctly in IE7 or IE9

    Hi,
    I'm a newbie and am having an issue with a webpage not displaying correctly in IE7 & IE9.  It displays correctly in Chrome, Firefox, Safari & Opera. I've looked around the forum but have been unable to find an solution. You can take a look at the page here. www.avgamer.com
    I'm learning HTML curently and would appreciate any help you can provide.
    Here's what it looks like in IE7
    and IE9
    in Chrome
    Thank you!

    You're using a commercial template.  Does the original template work in all browsers?
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • Watch movies on ipad it shows the wrong display of the movie how to fix?

    When I try and use the video app and use the shared folder to run movies from iTunes.  The wrong display of the movie shows up how to fix

    Well when you hook up to your computer over wifi their are to folders one for the videos on the iPad and one for the shared from iTunes on the computer where all my movies are.  And the worng display means that the picture it shows of the movies is wrong.  When you touch the picture of the movie it comes up with what to is and the real picture comes up of the moive.  When you back out the picture goes back to the wrong picture of it.

  • Bug or Feature? Different behavior after 1.6.0_02 in both Firefox & IE6/IE7

    Greetings,
    I have been testing a small java applet for a phpbb mod, named Proxy Revealer
    Basically the java applet "phones home" (connects back to the http host serving the applet) via a Socket connection to establish a direct connection, then basically writes a custom HttpRequest string with some parameters passed to it from the php script's HTML, so it looks like:
    GET /probe.php?mode=java&ip=initial_external_ip&extra=random_unique_identifier&local=LAN_IP&vendor=java_vendor&version=num&user_agent=browser
    which would allow the php script on the host/site to verify the client's IP address, and compare it with the initial IP that requested the page which loaded the applet, as well as Internal LAN IP if user is behind a router/NAT
    This allows the php script to unmask & log proxied users for security purposes, in case of spamming/trolling on the forum, in an attempt to thwart the average spammers/trollers at the least.
    The applet and the code works as desired and in various browsers, but only on JRE 1.6.0_02 and earlier releases...
    It seems ever since JRE 1.6.0_03, this has stopped working when the end-user has HTTP Proxy configured in the browser.
    I tested latest JRE as of date, ver 1.6.0_07, with IE6, IE7 & Firefox 2.0.0.15 and 2.0.0.16 and it still exhibits this odd behavior.
    This is what appears in Java Console when I try to visit the page serving this applet with an HTTP proxy configured in browser:
    java.security.AccessControlException: access denied (java.net.SocketPermission xxx.xxx.xxx.xxx:80 connect,resolve)
    xxx.xxx.xxx.xxx is the resolved IP of the server host that is hosting the applet, so basically the same origin....
    If I disable the HTTP Proxy configured in the browser, the applet connects back fine. So it only happens when HTTP Proxy is configured in browser..
    Is this a new feature or a bug??
    Here's the java applet code:
    // httpRequestor.java
    // Copyright (c) MMVI TerraFrost
    // Licensed under the GPL.
    import java.applet.*;
    import java.net.*;
    public class HttpRequestor extends Applet
         public void start()
              try
                   String javaVendor = System.getProperty("java.vendor");
                   String javaVersion = javaVendor.startsWith("Microsoft") ? System.getProperty("java.version") : System.getProperty("java.vm.version");
                   Socket sock = new Socket(getParameter("domain"), Integer.parseInt(getParameter("port")));
                   String path = getParameter("path")+"&local="+sock.getLocalAddress().getHostAddress()+
                        "&vendor="+URLEncoder.encode(javaVendor, "UTF-8")+
                        "&version="+URLEncoder.encode(javaVersion, "UTF-8")+
                        "&user_agent="+URLEncoder.encode(getParameter("user_agent"), "UTF-8");
                   String httpRequest = "GET "+path+" HTTP/1.0\r\nHost: "+getParameter("domain")+"\r\n\r\n";
                   sock.getOutputStream().write(httpRequest.getBytes());
                   sock.getInputStream();
              catch (Exception e)
                   e.printStackTrace();
    }and the relative portion from the probe.php script loading it:
              $java_url = $path_name . "probe.$phpEx?mode=java&ip=$client_ip&extra=$sid,$key";
    ?>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
      <title></title>
    </head>
    <body>
    <applet width="0" height="0" code="HttpRequestor.class" codebase=".">
      <param name="domain" value="<?php echo $server_name; ?>">
      <param name="port" value="<?php echo $board_config['server_port']; ?>">
      <param name="path" value="<?php echo $java_url; ?>">
      <param name="user_agent" value="<?php echo htmlspecialchars($HTTP_SERVER_VARS['HTTP_USER_AGENT']); ?>">
    </applet>
    </body>
    </html>A barebone/proof-of-concept demo (also employing a couple other tricks to detect CGI proxies in the same page):
    http://www.frostjedi.com/terra/scripts/ip_unmasker.php?mode=utf16
    Another similar java applet code (with demo) is found towards the bottom of this page:
    http://www.burghardt.pl/2008/05/web-browser-anonymity-threats/
    Both of these demos work with JRE versions 1.6.0_02 and older, but fail to work (in both IE & FF) with JRE 1.0.6_03 and newer - up to 1.0.6_07 which is latest as of date
    Thanks,
    Jasmine

    Thought I might elaborate on the details of the bug report I made, perhaps someone needs to add to it or needs to understand the problem better.
    Description:
    Unsigned applets cannot connect back via Socket to the originating host (from codebase) when a Proxy is configured in user's browser (IE7/IE6//FF3/FF2 tested) and when origin host's IP address doesn't resolve back to the same hostname.
    Example:
    www.hostingsite.com resolves to 1.2.3.4
    but, 1.2.3.4 resolves back to 4.3.2.1-somewebhost.com
    Affects JRE versions 1.6.0_03 - 1.6.0_07
    This wasn't a problem in 1.6.0_02 or prior versions according to my tests.
    An AccessControlException is thrown about SocketPermission:
    I believe the security manager is doing unnecessary lookups, even after the resolved IP matches to the IP of the origin host. This is apparent from the fairly long delay before the ACE is thrown about SocketPermission.
    Steps to Reproduce:
    1. Configure HTTP Proxy in browser (IE/Firefox)
    2. visit an html page that embeds a simple applet that tries to connect back to origin host whose hostname resolves to an IP address but the IP address resolves to a different hostname. (example code below)
    Expected Result:
    Applet should be able to connect back to originating host via Socket connection or write (post) to a URL on origin host (which requires a new Socket connection back)
    Actual Result:
    Socket sock = new Socket(Proxy.NO_PROXY);
    InetSocketAddress sockAddress = new InetSocketAddress(getCodeBase().getHost(), port);
    sock.connect(sockAddress);The above snippet of code would throw an ACE about SocketPermission when applet tries to initiate sock.connect
    Moreover,
    URL urlRequest = new URL(this.getCodeBase()+path);
    HttpURLConnection conn = (HttpURLConnection)urlRequest.openConnection(Proxy.NO_PROXY);
    conn.getOutputStream();would also throw an ACE about SocketPermission when the applet tries to initiate Socket connection for the conn.getOutputStream() call.
    Error Message(s):
    java.security.AccessControlException: access denied (java.net.SocketPermission x.x.x.x:80 connect,resolve)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkConnect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at HttpRequestor.start(HttpRequestor.java:16)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    x.x.x.x being the resolved IP address of the origin server
    Source code for an executable test case:
    import java.applet.*;
    import java.net.*;
    public class HttpRequestor extends Applet
         public void start()
              try
                   Socket sock = new Socket(Proxy.NO_PROXY);
                   InetSocketAddress sockAddress = new InetSocketAddress(getCodeBase().getHost(), Integer.parseInt(getParameter("port")));
                   sock.connect(sockAddress);
                   String path = getParameter("path")+"&local="+sock.getLocalAddress().getHostAddress();
                   String httpRequest = "GET "+path+" HTTP/1.0\r\nHost: "+getCodeBase().getHost()+"\r\n\r\n";
                   sock.getOutputStream().write(httpRequest.getBytes());
                   sock.getInputStream();
              catch (Exception e)
                   e.printStackTrace();
    Workaround:
    The only possible workaround I could find is if the the applet can be loaded from IP-address in the codebase URL to avoid the unnecessary lookups by the SecurityManger.
    This, however, maybe very difficult to use in most virtual-hosting environment, and IE browsers older than IE7 would most likely throw an error like "Class not found".
    Example, if www.hostingsite.com resolves to 1.2.3.4
    and http://1.2.3.4 goes to http://www.hostingsite.com
    Change the codebase URL in the html embedding the applet, from:
    "http://www.hostingsite.com/classes"
    to:
    "http://1.2.3.4/classes"
    I also forgot to mention in my bug report that this would also be quite a big problem in server farms, where the origin-hostname resolves to multiple IP addressses and when those IP addresses do not all resolve back to the same hostname.

  • Wakes up to wrong display setting then quits everthing !

    Hi all,
    I have a mac mini running an updated snow leopard plugged via an adapter into the HDMI slot of my Philips 40" LCD screen. For some time now, whenever I wake up the mac mini and the TV (both of which go to sleep after a period of inactivity), the screen starts off with the wrong display setting moving from 1360 x 768 to 1600 x 900 which is a much worse picture. I can switch it back through the menu bar, and that usually works, although sometimes, it also quits any open apps so I get multiple 'unexpectedly quit' error messages. This can also happen if I use the remote to wake it up without turning on the TV.
    Any ideas how I stop this ? I have repaired permissions and also verified and repaired the hard drive and that seems to have a short term impact.
    Any help would be much appreciated.
    Ben

    See if there is a way to turn off CEC on the Philips through its menu system and see if that helps.

  • TDS certificate address wrong display ?

    Hi
    All Experts.
    I am printing TDS certificate for vendor but the address for comapny is displaying wrong on certificate however we have
    maintained a correct adrress in comapny code data.
    Can any one please let me know for TDS certificate from where this address do taken ?
    Help is required.
    Regards,
    Pankaj.

    hi,
    You can edit the address TDS certificate address wrong display
    SPRO --Fianancial Accounting or Fianancial Accounting New -- Fianancial Accounting  Global Settings -- Tax on sales and Purchases -- Basic Settings-- South Korea-- Business Places
    Enter your Comapny code then select your Business Places here you can edit address to selecting address option.
    If you are using any customized Program please check with your ABAPers either any Z table is maintained, you can also check through Progrm where address has maintained.
    Regards,
    Rama Moahn Bangaru
    Edited by: B.Rama Mohan on Jul 15, 2009 2:56 PM

  • Mac Mail Wrong Display Name

    My Mac mail app for my icloud account has the wrong display name for the account.  About three years ago, I bought my mac on the company credit card, and had to use our accounting director's name for the billing address.  (We'll call him Richard Nicks).  Three years later, I open Mac mail and HIS name is the display name for my icloud email!
    Of course it's grayed out, so I have to change it in the icloud account.  But when I go log into icloud, his name does not show up anywhere.  I've confirmed the email addresses are all the same so I know I don't have multiple accounts or anything.  I've closed mail, resynchronized it, rebuilt the database, no joy.  Where in the world is it getting his name from and how can I change that?
    Thanks
    OS X 10.9.5

    Thanks for the response.
    In Account Preferences, the name and email address are grayed out so I cannot change those.
    I looked in my contacts, go under All iCloud, and there's only one contact.  The picture is of a piano that says Me, so I assume that is my Me card.  This has my correct name.
    Interesting to note, when I send an email from iCloud on my iPhone, it comes across with the correct display name.
    I'm at a loss on where else to check.  Thanks for the help!

  • Spry text fields "invisible" on ie6/ie7

    Hi, Attached is a screen shot of how spry text fields look in their initial state under ie6 and ie7 on a project at www.printingcommunication.com/wa/seattle/contact.html
    They are "invisible".
    I'm using Dreamweaver CS4 and spry 1.6.1. I have not made any modifications to the default spry yet. This works ok on every other browser. Does any one know what modifications I need to make to have these text fields show ok under IE6/IE7? Thanks...

    With all associated files (including the apparently interfering css file) linked, open the page in Dreamweaver.
    Make sure your CSS Styles Panel is open;
    select "Current" on that panel to get a look at the styles that are in play.
    In the bottom of the Styles panel, select the asterisk-asterisk-downarrow icon at the bottom left, so that you see only the styles in use.
    Then (if you have the option) select the right-hand cascade button...it looks like a little flight of stairs.
    Okay, in Design View, click on one of your input fields. Leave the cursor there and look over at the CSS Styles Panel. You will see the cascade of styles that are affecting that item. The lowest-most will be the most specific, but all that affect your item will show in a list.
    Make sure the bottom of the styles panel is opened up...you may have to drag it open if you haven't used it; close other panels below to make more room.
    You will see there all the attributes that have been defined for the particular style you are working with.
    This should help you to focus on what is exactly going on. The form tags come with their own styling, so you'll have to look for styles that explicitly state something like input {border: none;} You may need to step up the list (pausing to check the attributes list) to find the affecting style.
    By the same token, you can alter the styling as you wish, for instance:
    <style type="text/css">
    <!--
    input {
         border: solid 1px red;
    -->
    </style>
    Of course, if you are using Spry Validation Text Fields, you might not want to make them red, as I have done! They will have their own set of colors.
    I hope some of this helps your situation. If anything, it will let you get "up close and personal" with your CSS Styles Panel
    Z

  • IE6 & IE7 on the same PC

    hi:
    has anybody tried any of this approaches to run IE6 & IE7
    on the same PC?
    http://blogs.msdn.com/ie/archive/2006/11/30/ie6-and-ie7-running-on-a-single-machine.aspx
    http://labs.insert-title.com/labs/Multiple-IEs-in-Windows_article795.aspx
    jdoe

    Hugh Watkins wrote:
    > John Doe wrote:
    >
    >> hi:
    >>
    >> has anybody tried any of this approaches to run IE6
    & IE7 on the same PC?
    >>
    >>
    http://blogs.msdn.com/ie/archive/2006/11/30/ie6-and-ie7-running-on-a-single-machine.aspx
    >>
    >>
    http://labs.insert-title.com/labs/Multiple-IEs-in-Windows_article795.aspx
    >
    >
    > you can have a virtual machine to run legacy software
    >
    >
    http://www.parallels.com/en/
    >
    >
    > Hugh W
    >
    yes, virtualization seems to be the best approach, i'm
    planning to use
    Parallels in my MacIntel. for those using only Windows, the
    free VPC
    virtual machine image looks as a good option:
    "IE6 and IE7 Running on a Single Machine
    Many of you have asked how to run IE6 and IE7 in a side by
    side
    environment. As Chris Wilson blogged about early this year,
    it’s
    unfortunately not so easy to do. There are workarounds, but
    they are
    unsupported and don’t necessarily work the same way as
    IE6 or IE7 would
    work when installed properly. As Chris said, the best way to
    use
    multiple versions of IE on one machine is via virtualization.
    Microsoft
    has recently made Virtual PC 2004 a free download; we’ve
    taken advantage
    of that by releasing a VPC virtual machine image containing a
    pre-activated Windows XP SP2, IE6 and the IE7 Readiness
    Toolkit to help
    facilitate your testing and development. The image is time
    bombed and
    will no longer function after April 1, 2007. We hope to
    continue to
    provide these images in the future as a service to web
    developers.
    Now you can install IE7 on your main machine for development,
    and get
    all the advantages of IE7, like the RSS platform, native
    XMLHTTP stack,
    and improved security, while still running IE6 simultaneously
    in the VPC
    on the same computer. Most importantly, you don’t even
    have to buy an
    additional Windows license. The VPC image runs in a virtual
    machine that
    offers all of the functionality of a full IE6 installation
    without
    giving it any access to its host machine’s hard drive,
    registry, etc.
    You can make as many modifications as you want to the virtual
    machine
    without affecting your host installation at all.
    Included in the VPC image are:
    Windows XP Professional SP2 + high-priority fixes through
    November 2006
    Internet Explorer 6.0
    Internet Explorer 7 Readiness Toolkit 2.0
    While we’ve released a VPC image today with Windows XP
    SP2, we’re also
    investigating creating other VPC images, for example IE5,
    IE5.5, IE6 and
    IE6 SP1, as well as versions of IE on different language
    operating systems.
    Get more information on Virtual PC 2004
    Download Virtual PC 2004
    Download the Internet Explorer 6 Testing VPC Image
    One more note - VPC 2004 doesn’t run on Windows Vista,
    but this image
    will work fine with VPC 2007, which is in beta now. You can
    get this
    free beta via Connect.
    Happy testing!
    PEte LePage
    Product Manager"

Maybe you are looking for

  • How do I get Adobe Air Desktop App to notify user that a URL text file has been updated?

    How do I get an Adobe Air Desktop App to notify user that a URLRequest ".txt" file has been updated? via blinking system tray icon or something. New to Air and need someone to point me in the right direction. I have been searching web for hours and p

  • Screen Caps from tablet

    I'm trying to make a stop motion educational white board video. We tried with the phone and iPad and there were too many shadows and bad lighting. So I wanted to try using the Wacom tablet (which I can trace drawings) and using screen caps. But  of c

  • [request] taglib-sharp

    I've run into some trouble with my own attempts at writing a PKGBUILD for taglib# and I was hoping someone more versed in how to build mono projects could take a look at it. This is the PKGBUILD I've got so far: pkgname=taglib-sharp pkgver=2.0.2.0 pk

  • AE, Reset, still flashing amber

    I have a 3-month old AE. It was disconnected overnight and now will only flash amber. I have reset via the reset button, did a hard reset, then connected to MBP via ethernet and did a default reset. It still flashes amber and is not recognized my the

  • Where can I find cheap iPad Mini cases?

    I recently got an iPad Mini and a case from Nordstorm. It was the only iPad Mini case that didn't cost over $50. Unfortunately, the bargain wasn't a bargain for long. Along the sides of the case, the leather started to peel off and I am unable to rea