CFolder - Notifications at Public Area

Hello experts,
I've a problem when I'm using the cFolder to send Notifications to the vendors.
When I send a Notification to all vendors in the Public Area folder, the Vendor 1 can see all the other Vendors that receive the message too, so he can see the vendors that were invited to the bid invitation (this can't occur).
- All the vendors only have Visitor auhorization to the Public Area (only visualization)
The same occur when the vendor try to send a Notification via Public Area folder. When he clicks on the Create button, he can see all the other Vendors that are in the bid invitation.
Can anyone help me with this?
Thanks a lot.
Luciana

You might think of finding a solution in scheduling the reports and then automatically send them to one ore more e-mail recipients.
Whether or not this feature is going to be supported in a next release is something we will have to wait on.
Regards
Rob
http://oemgc.wordpress.com

Similar Messages

A user can only see the public area in a collaboration room

Hi all,
We have experienced that a certain user can only see the public area of
a collaboration room although the user has member rights to see more
content.
We have tried to remove the user from the room and add him again. It
did not help.
Other users have been added before and after this user without problems.
What could be wrong with this user?
Regards,
Ashwin

Hi Ashwin,
Check the roles and the groups by this user.. Is the same of the others users?
Regards
Eduardo

Notification on apps are not showing until i open them ??

notification on apps are not showing until i open them

Hello captin007,
Thanks for the question. After reviewing your post, it sounds like apps show notification only after you open the app. I would recommend that you read this article, it may be able to help the issue.
Understanding notifications on iPhone, iPad, and iPod touch - Apple Support
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

QM notification attachment links are missing from table SRGBTBREL

Dear All,
We have problem in our system and the documents(specially QM notifications-QM02 03) are not accessible from the content server only for a specific period (Nov to Dec 2009) due to a missing link in SRGBTBREL (No idea how the entries are deleted).
Now we want to know, how we can establish a new link or restore the missing link in table SRGBTBREL ?
Also if someone can tell how to find the relation between the PHIO_ID and notification number ?
or the relation between Archive object id and notification..if we have this information then we can some standard function module provided by SAP.
or anyone else have any better idea , please share
Thanks in advance.

Hello Syed,
Thanks for your reply , the given links were quite useful and we got some ideas that what should be the approach.
Approach to resolve the issue -
At this moment we are trying to get the relation between the SOOD , SRGBTBREL, SOFFPHIO tables.
SOFFCONT1 is no more useful for us as the documents are old and have been archived to Content Server.
We have all entries in the SOOD table and also in SOFFPHIO table, but in the SRGBTBREL the links are missing and hence the documents are not visible in SAP.
If somehow we can get the missing link is this table I am quite sure that documents wil be visible and accessible from SAP.
Our main target is to relate SOOD SRGBTBREL and SOFFPHIO and get the PHIO_ID for the mising documents and then we have a functional module which will help to get the data from content server.
As per my current unerstanding this is the relation between the tables
SRGBTBREL-INSTID_B is related to: SOOD-OBJTP,SOOD-OBJYR,SOOD-OBJNO,
Like FOL30000000000003EXT31000000002416
Here
SOOD-OBJTP = EXT
SOOD-OBJYR = 31
SOOD-OBJNO = 000000002416
And This elelement is than linked to table SOFFPHIIO as follows:
SOOD-IF_DOC_BCS = SOFFPHIO-LOIO_ID
In the table SOFFPHIO you can find the PHIO_ID what is linked to
SOFFCONT1 or the Archive Server
I am trying to solve the problem by using the approach mentioned above , still somehow I have some difficulties to get the links between the tables.
Can some one tell if my approach is correct or not ? or suggest with any other simple solution ?
Thanks & Regards
Javed Patel

Hi, I want to purchase adobe photoshop, however I'm based in Zimbabwe and Zambia and I received a notification that these areas are not supported. How do I purchase adobe photoshop using a paypal account?

Hi, I want to purchase adobe photoshop, however I'm based in Zimbabwe and Zambia and I received a notification that these areas are not supported. How do I purchase adobe photoshop using a paypal account?

Adobe Resellers http://adobedealreg.force.com/PartnerSearch?lang=en
-http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

Attributing Documents in the public area of a Collaboration Room

Is there a way you can attribute documents to your taxonomy that are stored in the public area of a collaboration room?

Thanks for your response Stephen but I've already think about that.
Actually, the room part "KM Document" works with an external parameter manually entered by the user.
So, I just have to create an external parameter and enter the real path after the creation of the room.
Are there any other standard solutions ?

Lock settings for use iPod in public areas

We use the ipod in a public area and people reset the main menu all the time.
Is there a possibility to lock the settings of an iPod, without locking the whole iPod?
But: we cant lock the iPod entirely with the set combination, because visitors couldt´t use it anymore.
iPod 30GB Windows XP

im sorry to say the answer is no.

Public Area in Room Template

Hello,
I created a room template which doesn't contain a public area. This works fine. Now I want to create a room template with public area. Therefore I copied the template without public area and tried to modify it. I changed the parameter Access from private to public in the cmRoomExtensionSP2FP extension for the documents. But I can't see any changes. The room does still not have a public access. Does anybody know, what the problem is and what further steps I have to do?
Regards,
Dominik

Hi Dominik,
you should also assign one or several pages to the public-Role
Hope this helps
Karin

My iPhone no longer alerts me when I have texts, even though all my notifications and sounds are on. Can I fix this?

My phone no longer chimes when I have a new text message. Or, alternatively, it will chime when I unlock it, even if I received the message hours ago, but won't alert me when I actually receive the message for the first time. My software is updated, and all my notification sounds and alerts are on. Often it registers that there's a text message (there will be a red circle above the app), but the notification never pops up. If I do immediately get an alert, it doesn't complete the chime and my phone flashes but immediately shuts off. Is there some way that I can fix this?

Sorry to know that..
After backing-up your data try a Factory Restore. also check whether the phone Firmware upto date ? You may check using the Nokia Suite .. If not you may update that or if already with the latest Firmware re-install the Firmware and try again ..

Update notification shows there are updates but when I click on the update option it shows a blank screen

The update option on the app store shows a notification that I have 'n' numbers of updates but when I click on the update option it only shows a blank screen. Even after updating the apps individually from the purchased option, the update option still shows a blank screen instead of "All you applications are up to date". Please help.

Many people are having this problem for the last couple of days. According to Fly150in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

Yosemite Notification Center prefs are not being saved

When I choose System Prefs/Notifications and move a program from the In Notification Center section to the Not In Notification Center section by unchecking that particular programs options, upon the next use of the program it returns to the In Notification Center list.
I've repaired Permissions, but it didn't help.
Is there something I'm missing?

Here are the instructions I got from AppleCare from an Apple Engineer. I'm not sure if the fix was specifically for my machine or if it'll work for someone else. Follow at your own risk.
1. Open the Library folder in your Home folder.
2. In the Library folder, open the Application Support folder.
3. Locate the folder named NotificationCenter. Drag this folder to the desktop.
4. Next, open the Terminal application.
Copy and paste each line of these commands into the Terminal window, in order. Press return after each line:
cd `getconf DARWIN_USER_DIR`
rm -rf com.apple.notificationcenter
killall usernoted; killall NotificationCenter
5. Close the Terminal app.
6. Restart your computer.
The notification preference changes won't stick until you restart a 2nd time after this.

TS2755 Receiving "Message Send Failure" notification, but messages are going through?

For the past few days, I have been receiving a "Message Send Failure" after every iMessage that I send. The messages are going through, but I still receive the notification every time. I have restarted my phone, signed out of and back into iMessage, and reset my network settings. Nothing seems to be working. Anyone have a solution? I'm having the same problem on my iPad, which leads me to believe it's a problem with iMessage at large as opposed to a device problem. Thanks!

If you have others that are receiving your imessaging but not the group you are attempting to send to then do this:
Click on your text messaging area using imessaging enabled and then type a message to yourself. Do this test to verify that your imessaging apple server is working properly. IF you get the messsage back to you in BLUE this indicates to you that both the outgoing and incoming text messaging is working as imessaging. With this piece of information verified that will indicate there are connectivity issues with individuals or all that are a part of the group you are attempting to contact. Please do not conclude that at a point in time this communication worked via imessaging that there may be some in the group that are now having conectiviity issues of their own.
Good luck, Friend.

How do I turn off all of the notifications? They are so annoying.

How do I turn off all of the notifications on iPad mini? All of them at once. They are so annoying. And it's annoying to go to preferences and put off the notifications for every app. When I instal any app it asks me - do you want to recieve notifications? I say no, but almost every app does the notifications.
P.S.
I wish to **** someone in apple for this annoying thing. Please tell me how to turn this annoying thing off.

Settings>Notification Center>INCLUDE>Turn off everything

Cannot connect to WiFi in public areas or private or Ad Hoc connections

I have a 32 GB iPod Touch 2G that is running 4.2.1
All has been going well, until last week. I tried to connect to a public WiFi (that I have connected to 50 times or more) and it said "Cannot connect to Network". I tried everything that I know how to do, but nothing worked. I then went to another public WiFi (with WEP), but could not get on there either. I then went home and tried to connect to my computer through an Ad Hoc WiFi connection (since we do not WiFi at our house), but I was not able to connect there either.
I reset it, I synced it, but the problem persists.
I always have the iPod on Airport mode, so as not to run the battery down. I then take it off Airport mode, turn on WiFi, and wait for the Network to show up on the iPod Touch. I then press the Network that I want. It immediately gives me the check mark next to the Network name, then later it gives me the WiFi symbol at the top left of the screen. I then wait for the Login page...it never comes up. I then go to Safari to force it to come up, but nothing. It says that I am not connected to a Network. I then get fed up with it and try to turn off WiFi, but the Network name stays, even though the WiFi is Off. I then try to turn on the Airport mode, but the airplane does not show up. I try and try to get away from the network, but it will not reset to normal until I press the Home button and the On/Off button together. I then get the circle of dashes (but just a short 1 and 1/2 rotations - ODD), then the black screen. Then I press the On button and get the Apple symbol. Then I sign in and the Airplane is there and the WiFi is off...till I try again. No connections and then I have to repeat this to get it back to half way normal.
Please help me with this situation. I really do not want to restore the iPod Touch, since I do not have a WiFi network near me...and I have a lot of apps that would have to be set-up through WiFi (taking a lot of time). My fear (if you could call it that), is that if I restore the iPod Touch, and find out that the WiFi problem persists...then I will not be able to use a number of Apps that I use a lot.
There has to be a simpler answer to this situation.

+Comment on #2. I'm not aware of any offline apps working with an iPod touch that hasn't been jailbroken. If you have jailbroken your device, we really can't help you here per the terms of service of this website. However, if this just updated data for a legit app or a web app, then it you are going to have to get network access working for it to work and, as you have said, iTunes isn't going to do it.+
Answer to #2: For one thing, the iPod Touch that I have is NOT jailbroken. I have never jailbroken any of my devices. I am a big supporter of Apple products, because they work. If a device is jailbroken, essentially taking Apple's expertise out of the equation. If I wanted to do that, I would use Android, and suffer with the fragmentation that they suffer with (along with all the problems jailbroken devices have). Enough on that.
Offline Wiki is an approved app from the AppStore (it is Wikipedia in your pocket, without the Internet). You download the app from iTunes. It is useless till you then download the content (whichever language that you want - for example the one I want, English is 3 GB of space). Since I am not in a WiFi area, and I do not visit WiFi areas often (nor for any real length of time, downloading 3 GB of information takes hours (nearly three hours, when I first did it). The only reason that I was reluctant to Restore my iPod Touch, was to avoid having to do that process again, and not being able to use the app (which I use a lot) until I do spend the time to download the Wikipedia Database onto my iPod Touch.
+A comment on #1. Those websites that require you to login again - this is a function of the network setup at that site. In effect, they are expiring your lease as soon as you disconnect. When you log in again, you are treated as a completely new user.+
Answer to #1: Yes, I understand that. Thank you.
Good luck on the restore.
Thank you. This, unfortunately was what I had to do. As expected, but not for sure, the WiFi is now working again. It seems that my iPod Touch got corrupted (within the iOS). The reinstalling wasn't as bad as I thought it would be, except I do not have the use of Offline Wiki (since my visit to the doctor yesterday was only for an hour, which I used to update all the other things that I needed WiFi access for. I started the download process, but it will take at least 2 hours to finish).
Conclusion: The only way to fix this situation, as far as I can tell, is to Restore your iPod Touch. Thank you for reading my long windedness. Also, thank you "luvlabs" for our conversation (though we haven't seen eye-to-eye much in the conversation, but I appreciate the time you spent to try. Thank you.
Message was edited by: Fr. Ignatius

Creative Cloud notification "Administration rights are required-" but nowhere to enter credentials

I told Creative Cloud (the menubar balloon) to go ahead and install CC 2014 updates, and left the computer to update. Later, I had to reboot the computer due to a power failure (all items now show as "Up to date" in the Apps tab). But I'm getting Notifications every 10 seconds saying, "Creative Cloud. Administration rights are required to complete Adobe Add-ons installation or removal." I'm happy to provide those credentials, but there is nowhere to type them! I've looked in all the tabs in the Creative Cloud balloon, and displayed all windows (so it's not hidden under something else).
SOLUTION: I quit Creative Cloud, then opened Creative Cloud again. The notifications are no longer displaying, and applications are all up to date. Apparently something was confused by the power outage.

Some 10.9.3 links
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

CFolder - Notifications at Public Area

Similar Messages

Maybe you are looking for