Cfthread and multiple cfpdf calls with a cfprogressbar on top

Hello all,
Im working on a project that will generate PDF documents dynamically. During this generation process I am performing a wide range of document manipulations from using cfdocument (for most of the content) but then am also using some DDX to handle multiple watermarks in one CFPDF call. So so far I have consolidated most of my requests into just a handful. Although just to note, using DDX has seemed to slow down the overall PDF generation compared to previously just using adding watermarks with multiple requests. So now Im trying to speed things up a bit and am a bit gun shy at using CFTHREAD after reading several blogs. Im also wondering if it is even worth pursing as an option to speed up the PDF generation process. We will have 250 concurrent users per day using this application and probably 20-30 generating PDFs at one time. Either way I would like to implement progress bar to top it off, Im guessing it will work between threads..?
So is CFTHREAD worth pursuing for speeding up the PDF generation process?
Beuhler?

Anyone have any thoughts?

Similar Messages

Is SSL and multiple websites possible with Lion Server?

this is the obligatory apology from a nub here....
I have not been a sys admin since the days of NT 4.0.
I like to think that "hey, i might need a touch up here and there, but I think I can find my way around..." Wrong.
I have been searching, and reading and searching and reading, and trying everything I can think of.. and I CAN NOT figure out how to get mutliple websites working with Lion Server, using self signed certs 1 for each of my subdomains.
Has anyone, anywhere (thank you google for returning searches to me from 2004?!?! More puzzled confusion....) posted a step by step guide yet???
I have a mac mini, and I have two domain names that are resolving to my exterinal interface on my router just fine, and I have tried what I thought was
every different possible combination of voodoo, magic, 00000...MoreTestingNeeded.conf, and all the other tricks.
Is it possible to get ssl and multiple websites working with one IP address?
Thanks...

Thank you very much for your time and input. My birthday was fantastic! Thanks for asking.
I found out about SNI while researching an error I was getting in the log. I really never found any definitive "this is what you need to do", so I was going to get back to it later.
You probably know this, but Lion Server breaks out all of the virtual hosts into seperate documents in the "sites" directory. All I do is I launch the server.app, and in the web component, I enter the name of the website that I want to resolve to my server, and I give it the path to the docs. Thats it. There is no DNS configuration to speak of, on my part, and I don't believe that its necessary (?) to touch the httpd.conf file at this point yet either, even though I think I hear others saying you do. (I have no issues with getting into the file and making any changes, I just thought it was interesting.)
I am still trying to figure out how a user is supposed to add any other types of services LIKE ftp, etc. I know and use the server admin tools, but I have found that the app really does do its job in terms of creating all the dns records for resolving the sites you create. I sure hope its not just using the host file, is it? I never see any additional files in the DNS manager, for any of the subdomains. Where are they?
Here is the contents of what appears to be the first file read, that is for SSL enabled sites:
``````````````````````````````````````````````````````````````````
This is "0000_any_443.conf:"
`````````````````````````````````````````````````````````````````
## Default Virtual Host Configuration
NameVIrtualHost *:443
<VirtualHost *:443>
ServerAdmin [email protected]
DocumentRoot "/path/to/the/docs"
DirectoryIndex index.html index.php /wiki/ default.html
CustomLog "//log" cmbndvhst
ErrorLog "/"
<IfModule mod_ssl.c>
SSLEngine On
SSLCipherSuite "SOMEGARBAGEIDONTKNOWIFISHOULDSHAREORWHAT"
SSLProtocol -ALL +SSLv3 +TLSv1
SSLProxyEngine On
SSLCertificateFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
SSLCertificateKeyFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
SSLCertificateChainFile "/path/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
SSLProxyProtocol -ALL +SSLv3 +TLSv1
</IfModule>
<Directory "/Path/To/The/Docs/XXXX/SDFSDD">
Options All +MultiViews -ExecCGI -Indexes
AllowOverride None
<IfModule mod_dav.c>
DAV Off
</IfModule>
</Directory>
Include /httpd_passwordreset_required.conf
</VirtualHost>
```````````````````````````````````````````````````````````````````````````````` `````````````
So.. my questions are:
Where in the .confs do I add what I need from your above items? Would it go each of the site docs that I need? I am really not sure what apple is doing here.
I have 4 domain names resolving to my server right now, and subdomains to each of the domains. So there are a total of about 10 "site" docs, not a big deal to change each, I just wonder if Lion overwrites these docs with each refresh or what? Also, If I try to add a third .com right now it breaks the whole site.
(Out of conversation, but I just remembered this. I just had to "quit" out of the server.app.) When installing the directory server, it hangs on "getting certificates". The spinning wheel (not the rainbow collered one, but the black one by the words "Getting Certificates") just sits there and spins. I finally just hit the red X and relaunch server.
Lastly, you meniton importing the key. I am using the key manager within the server app. I am not sure where and how I would make the cert and key you are referring to for the importing? I have tried to use the key manager in the OS, but I am not sure of the relationship between that key manager app, and the key manager within the server.app. I have tried to create certs in the keymanager in the OS side, but I do not know how to get them to show up for use in the keymanager in the server.app.
BTW: Thanks. Thanks for the help. I really appreciate it.

International travel and multiple-day events with time zones

I can't see how I can set an international travel easily as one event, e.g. from 2010-01-11 20:30:00+11:00 to 2010-01-11 07:10-10:00. I can set both as in one Time Zone, but that is not what I want. I want to set as my itinerary from a travel agent says, e.g. the start and end in different Time Zones. Although I can enter the departure and arrival as two events, that is not what I want to do. The air travel is one event, not two.
Also, I often want to set schedules for multiple-day international meetings using the local time of the meetings while my iCal is still in my own Time Zone, but this is not possible. As soon as I select All Day in a new event, the Time Zone option disappears. Of course, I can change my iCal Preferences to use the target Time Zone (instead of my local one) and then set the meeting schedule, but this is not what I want to do. I want to be able to select a different Time Zone for multiple-day events while I am in my own Time Zone.
These are rather common problems in any internatioanl businesses I suspect. It would be really handy to tie iCal with travel itinerary applications. If this is possible, I also would be able to get the information directly from travel agents in iCal format and it is a great potential for developing such applications.
Does anyone know whether these are possible in iCal or whether Apple may be working on it?
I also can't find a Feature Request for Apple, to ask about it. Does anyone know where to find it?
Thanks.
Message was edited by: yoichi.takayama

I just didn't get the context here. Do you want to display multiple rows within one Outlook calendar event? If yes, I think it's impossible.
Please reattach the sample which will be very helpful for others to understand your requirement, then possibly provide a solution.
Bhasker Timilsina (ManTechs Inc)

How can i use an airport base station and multiple airport expresses with U-verse and still use wireless tv boxes?

I just got uverse, and when I put my Airport Base Station in Bridge mode I lose access to the 4 airport express stations I have. Can anyone tell me how to turn off the u-verse wireless, set up a network with all the apple stations and still have wireless u-verse tv boxes work? Thanks!

Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

What's the best phone app to use on iPad for uk users to make calls with

I know there's a few apps out there to use and make phone calls with, but which is the best one for uk users/callers.
I would prefer not to use Skype but if that's the best on the market, that's what I will use.
As you can probably guess I'm new to the iPad, so all the help I get is appreciated loads.

Cheers for that, looks like I will have to use Skype then. Unless someone else comes up with an answer.

I'm dropping calls with perfect service..?

I have all my bars so I know I have perfect service but yet my calls are dropping 30 seconds in. I can't even talk customer service because I can't stay connected that long. Has anyone else heard of this? I have service so I am really confused.

I never had a trouble with calls ending or dropping until I upgraded the OS last week. Now, I have actually watched my phone and during a call with great connection, the call just ends like I hit the end button. Today alone I watche dmy phone drop three calls. I don't think this is a SIM card issues but a software issue form the update. The other problem is for no reason at all, my music will start playing. I have the phone sitting on the table (no movement, nothing bumped it) and the music just starts playing. I have even had calls drop and music starts playing.

How to FaceTime and iMessage on multiple apple devices with one iTunes account

We recently received iPad 2's for Christmas and was looking for some advice on how to FaceTime and iMessage on multiple apple devices with One iTunes Account (Apple Id). I have created or attached other e-mail addresses to our apple id but do not know how to use them on the new devices. Our home MacBook Pro uses our main apple id for FaceTime. The iPads have been setup with the main apple id w/o being able to use FaceTime and iMessage.
Please Help...
I appreciate the help and support.

P and V-
If you are trying to connect to someone with a different Apple ID, I think all the devices should work, but one at a time.
The problem is when you try to connect between two with the same Apple ID. Once the calling device tries to make the connection, it finds the second device to be "busy". That is where each needs to use a different E-Mail address when setting it up.
On iOS devices, when you press the Home button to exit an App, the App may still be active in the background, even when the device is sleeping. If FaceTime or iMessage is merely being active that way, it may be enough to "tie up" the E-Mail address.
From the Home screen, double click your Home button. You will see a list of recent Apps along the bottom of the screen. Press and hold on one of them until they start to wiggle. You will then see a red minus sign on each. Pressing the minus sign will remove an App from the list, and stop it from working in the background. (Click the Home button to stop the wiggling, and again to hide the recent Apps.)
Fred

TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Call Forwarding Breaks with iOS 8.3 Update on iPhone 6 and iPhone 6 Plus with AT&T

Ever since the iOS 8.3 Update, call forwarding is no longer working on my iPhone 6 Plus. I have spent dozens of hours troubleshooting with both AT&T Advanced Business Technical Support as well as many hours with top technicians from Apple at my local Genius Bars.
This is a critical bug for me as I used to use the call forwarding option multiple times a day, EVERY DAY, because when I am in certain business locations my mobile phone gets no reception and calls go right to voice mail. I need to have them forwarded to the land line I'm located at.
APPLE, PLEASE HELP!!!
I've done extensive testing, and this seems definitely to be related to Apple iOS 8.3, and it seems to be specific to the iPhone 6 and iPhone 6 Plus ONLY.
To illustrate the EXACT problem:
A: Settings -> Phone -> Call Forwarding
B. Call Forwarding - Turn on
C. Enter Number and return to previous screen by touching the blue "Call Forwarding" to return to previous screen.
D. Call forwarding button is "green" for a split second, then returns to previous OFF state and no forwarding number is displayed. DOES NOT WORK.
NOT AN AT&T PROBLEM. IF SOMEONE IS EXPERIENCING THIS WITH OTHER CARRIERS PLEASE COMMENT HERE.
Further validation this is isolated to iOS 8.3 on the iPhone 6 and 6 Plus ONLY and not the sim card from AT&T...
Here are the latest steps I did with my AT&T sim card and my wife AT&T sim card (she has an iPhone 5s):
1. Removed my sim and put it in the 5s. The phone said that a "carrier update" was required and I selected "NO" to that prompt. Call forwarding functionality worked as expected on the 5s running iOS 8.3
2. I removed the sim from the 5s and re-inserted it. This time I selected "YES" to do the carrier update to eliminate that as a variable, and the call forwarding functionality still worked as expected.
3. I then placed my wifes sim in my 6 Plus. Call forwarding functionality does NOT work on the 6 Plus (was not prompted for carrier update). Also, keep in mind this is my second phone (Apple provided me with a new iPhone 6 Plus when they couldn't resolve the problem at the Genius Bar after hours of troubleshooting).
Note: I did one additional test which as interesting: I put my sim in the 5s and turned call forwarding "on". Then, I put the sim back into my 6 Plus. The calls were still being forwarded to the number I put in while it was in the 5s, but the call forwarding interface in the 6 Plus showed that it was NOT forwarding calls. I could not turn OFF the call forwarding from the 6 Plus and had to put the sim back into the 5s in order to turn off the call forwarding.
If anyone has an update on this, or any other suggestions please advise! This is a critical issue for me as when I travel and when I am in poor areas of reception I need to forward calls. This is a featured I was using multiple times a day, EVERY DAY.
APPLE????????? HELP!!!!!!

Yes, I am dealing with this right now on at&t with a 6 plus. I've been down the same road as you. I got it to work with a windows phone yesterday but not my 6 plus when I switched back to the iPhone. My wifes 6 works fine. I believe it is an at&t issue and not an 8.3 issue. After dealing through several levels of support at at&t, they are telling me it has to do with their transition to hd voice. Some people are having this issue because they are updating their system and some peoples phone profile, on phones that have hd voice capabilities, are not getting added to their line and call forwarding will not work without it. I have a trouble ticket open to their engineering dept and they promise it will work for me on or before the 24th of april. Engineering has to build my phones profile so call forwarding will work with my iPhone.
This is frustrating because like you, I need to forward my calls because I have no signal in my office and need to forward to another phone so I can get my calls. If at&t would quit dragging their feet and enable wifi calling, this wouldn't be an issue for me. I would suggest you put more pressure on at&t and escalate this until it gets resolved. Or put your sim in a phone that does not have hd voice capability and see if it works then.
Good luck. I'm keeping my fingers crossed this will be fixed for me on or before the 24th. We'll see.
EDIT: I see you did put it in another phone and it worked. That backs up that the issue is at&t and their hd voice upgrades. They had no explanation as to why some work and some don't, but have them make sure a profile for your phone is on the line. If not, they'll need to build one for the phone so that it''l work. At least that's the story for now. Like I said, I'll know more in a day or two.

How to loop through single XML File and send multiple RFC calls?

I am looking for the best approach to use for making multiple RFC calls (can be sequential) using a single XML file of data. I have been attempting to get a BPM loop working, but to no avail. My RFC only accepts a single set of delivery input and I have been told to try to work with it as is.
input xml sample:
<?xml version="1.0" encoding="UTF-8"?>
<ProofOfDelivery>
   <POD>
      <delivery_number>1</delivery_number>
      <carrier_name>UPS</carrier_name>
   </POD>
   <POD>
      <delivery_number>2</delivery_number>
      <carrier_name>UPS</carrier_name>
   </POD>
</ProofOfDelivery>
I need to make a synchronous RFC call for each set of POD data.
Thanks in advance!

Thanks for the inputs.
I tried with a BPM and multi-mapping transformation before a ForEach block. I am getting this error:
Work item 000000028028: Object FLOWITEM method EXECUTE cannot be executed
Error during result processing of work item 000000028029
com/sap/xi/tf/_ProofOfDeliveryMultiMapping_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntim
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
Probably because I am not making/using the container objects properly. Here is a screenshot of my BPM. Can anyone spot my issue or point me to an example on this sort of container use?
[http://kdwendel.brinkster.net/images/bpm.jpg|http://kdwendel.brinkster.net/images/bpm.jpg]
Thanks

Call Library node and multiple array copies

Hey everyone,
I am trying to do the following using a hybrid of C and Labview:
1.) Create an array in Labview
2.) Pass the array into 2 seperate DLLs at the same time
3a.) One DLL modifies the data and then updates a flag. For example, the array created in 1 in 100,000 units long, this DLL modifies 999 units in one pass and updates the 1000th unit to say that the 999 units have been succesfully written. It would do this 100 times in this example.
3b.) The 2nd DLL checks the flag unit set in 3a, and if the flag is a certain value, the 2nd DLL reads the 999 units modified in 3a and performs operations on them.
Note: There is no read/write conflict here, since the only way 3b operates on the memory is if 3a has completed its operations and updated the flag.
The problem:
Labview creates 3 copies of the same array in memory. Once in step 1, and 1 for each DLL. This is problematic since the 2 DLLs can't communicate with each other anymore in the way that is described above, since the method above requires that the DLLs in 3a and 3b operate on the same memory locations.
The question:
How can I prevent Labview from creating multiple copies at the Call Library node so that my DLLs can operate on the same chuck of memory that is created in step 1.
Thanks,
Austin McElroy

AustinMcElroy wrote:
Ok, so as nk said, even if the idea is terrible why is Labview making extra copies? If I have 2 DLLs in serial to avoid the flag idea, and I am working with datarates of 100MB/s coming off of my acq. card, that is 100MB allocated for the initial array, 100MB allocated for the first DLL and 100MB allocated for the 2nd DLL, per second. Perhaps even more allocations and copying from C back into Labview (I am unsure of this, I will test it tomorrow). This is alot of memory being allocated and copied extraneously. Is there a way to prevent Labview from doing this?
And LabVIEW doesn't make copies if it doesn't need too. For this to work however you need to pass the array through the CLN (input it on the left side and output it at the right side of the CLN and from there wire it to the next function), not branch it. That should even work if you configure the array parameter to be a C array data pointer (since LabVIEW will pass the pointer to the actual data to the DLL), but it definitly works without copies for LabVIEW array handles.
Then LabVIEW won't make a copy (except maybe in some older versions).
If you branch the wire however, LabVIEW has no choice but to create at
least one copy to satisfy data flow contraints.
This doesn't mean that the first DLL function could store the array pointer and operate on it after it has returned since a C function once returning control to the caller has absolutely no control over a pointer it got passed anymore. At the time your DLL might decide to access that pointer LabVIEW quite likely might have left the diagram already and consequently deallocated or reused the handle for something else, causing your DLL to corrupt memory. Even if you decide to use events to signal the second function to not return before the data has been modified by the first, you create a monster of complexity that will sooner or later blow in your face. Either the user might decide to abort the programm mid term and your second function never receives the signal so never returning, making your application simply hang in there with no other option than to kill it through the task manager, or someone will go modify your little program not knowing the (unlogical) dependency of those two calls and creating something that simply works very wrong or if you are very lucky will crash with an access violation exception early on.
Rolf Kalbermatter
Message Edited by rolfk on 03-24-2008 01:39 PM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Content Conversion: One row with one header and multiple item structures. Possible?

Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
Jens

SAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm&current_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm&current_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens

Integrating multiple UCCX clusters with same Call Manager Cluster

I want to know if I can integrate multiple UCCX clusters with 1 Call Manager cluster? If yes, can someone please point me to the documentation.
I appreciate all the help..
Thanks!!!

Hi
Yes, you can. I'm not aware of specific documentation for this, but a couple of notes:
- Make sure you use unique resource accounts (e.g. JT user in particular as that is automatically managed by UCCX and one cluster WILL break the other)
- I would also use unique AXL accounts and probably RM accounts. RM you could share between clusters to just have one RM account to associate any agent phone to, but it's safer to have single-purpose service accounts.
- You can't assign a user to a particular cluster - so you enable IPCC Extension on one user, they appear in 'resources' on both UCCX servers.
Regards
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Deal with multiple inbound calls on 2 x BRI to one extension number

This feels like a really dumb question but I have RTFM and still am stuck.. This is my first UC setup, although I do a lot of IP networking...
We have a UC540W with 2 x BRI so up to 4 PSTN calls.
I want the inbound calls to go to extension 100 which should appear on a line key on all phones so any user can & should pick up incoming calls.
Phones are SPA500 Series (504 and 508)
I am working in CCA.
If I set it up with Line 100 as a shared number on all phones then only 2 calls can be presented and the 2nd call is only presented to the phone with the first call on it, the line key just shows as in use (red) on all other extensions.
The phones are not octal line compatible otherwise this would seem to be the answer to the problem.
I tried setting up (Via CLI) multiple ephone-dn with the same extension number and these appeared in the list for setting an overlay button, but CCA then overwrote these which makes it an unsuitable solution.
The other option would seem to be to set up a multiple extensions (101-104) and put these into a hunt group and under an overlay button, but as these numbers won't be assigned to an extension so can't see how to create these within CCA - if I put them in as floating extension then they appear in the list for an overlay button but not in the available list for setting up a hunt group....
This doesn't seem like such an unusual setup that it should be so difficult...
TIA
David

AFAIK you can have one iCloud account per user account and I can't find any suggestion that there is a limit to the number you can have.
However if in doing all this on the Mac you are talking about you have already created three iCloud accounts then you can't create any more, and there is no workaround for that. You can still sign into an existing iCloud account which has been created on another device, so is the sixth account you are talking about one which already exists? If it isn't, then you would have to use anoter device to create it, then you should be able to sign into it.
As to 'dissociating', just signing out in System Preferences>iCloud should do it. AFAIK the accounts are not tied to the hardware.
All this is to do with iCloud - iTunes accounts are a different can of digital worms and may behave differently.

Cfthread and multiple cfpdf calls with a cfprogressbar on top

Similar Messages

Maybe you are looking for