Change all activity to Display in a role

Hi all,
I wanted to know if we can change all the 'ACTIVITY' in a role to display. I donot want to do it one by one for all authorization objects but in one go. Is this possible, if yes then how can we achieve it?
Thank you

Hi Zaheer,
As there is exact no way to restrict all activity to display in single action like Organization value in role. To make a display role you need to also check the other objects not having the field ACTVT for ex: in HR object (P_ORGINCON) restriction based on authorization level Values in this fields are R, W etc.
Better to check table AGR_1251 for particular role. This will provide you the all field along with values exist in role, and based on that u can decide what need to be restrict to make a role display. For this u also needed the inputs from functional team alongwith testing.

Similar Messages

List all active change documents

Is there a way to list all ACTIVE change documents? In other words - I only want ot know which change documents are being used in the system...
Thanks

Thanks Anji - Seems there is no place to show if a change document is active, but I was being silly since if a change document is not active or being used, it will not appear in CDHDR / CDPOS!
A useful pool table is TCDOB - It lists all change documents with properties like which tables they monitor etc...

Labour activity change all activities value should be change

HI PP Guru,
i getting problem in activities type. i have 6 activities type in on work center. our client requirement is when he will do the confirmation. he will change the value of labour activity.and same time other 5 activities value should be change according to labour value change
i have define formula
1st i have taken value from operation qty in labour
formula for labour : labour qty * operation qty / base qty
and other formula for 5 activities
X * labour qty / base qty...........where X is activities type
kindly suggest me woh it will be effect others activities value when labour value qty change at the time of confirmation
regards
Aqueel

Dear ,
Did you assing any Activity Type in Work Centre -Costing tab ?? What is SAP Standard Vaule are you using in CR02-Work centre ?? Do you have only labour activity which can be the only Standard Value key ??
Your labour activity values can change based on actual work but you can not change the Activity type at Confiramtion level .Activity Type can be control either from Work Centre or you can choose at routing operation if they are not assinged in Work centre .
I think you have total six activity type ( as per KP26) for same work centre and it depends on the Labour activity .It means , you will not use any pre-determined activity type in costing Tab -CR02 -Work centre but have six formula key .
As far as I know , you have the option at routing level to choose the Acitvity type in CA02-Hit on operation details -Double Click -Stabdard Value Tab -Choose the Activity Type but all this activity type should be under same Cost elements and Cost centre based on the KP26 ( Allocation of cost element ) .
In our case , we have only labour activity based on skill .So we have group of skilled labour with certain activity type /Formula key and they are identifed as one Work Center .Like wise we have a set of 7 kind of skilled labout group and they are individaul work centre .We do not assing any activity type in work centre .Either we slecet/change at routing level and then carry Read PP master data before GMPS , CNF of order .This is basically based various activity type .
But in your case , is it Labour hrs getting changes than actual plan ??
Just explain your Work centre , Standard Values and Activity Type so that forum can also put their comments.
Regards
JH

Change all slides' display time en masse

Greetings,
Cp 5.5
I've recoreded a training and assessment simulation where the slides' timing is set to 3 sec. Post-production: I want to change ALL of the slides' timing to 2 sec.
I realize I should have done this in the Global Prefs Default prior to recording. Going in to the Prefs and trying to change the Slide Duration post-production does not work.
Is there a way to do this without having to change each slide individually?
Much Thanks!
k

No, I do not know about such a work flow, and also think it would probably cause a lot of issues. If you have interactive objects, changing the slide duration will change the active/inactive parts, if you have Effects the duration will be changed relatively, if you have audio, it will be cut off etc...
Is there a particular reason why you want to do this? Perhaps to decrease a little bit the filesize? Most object default timeline will probably also be 3secs, to decrease the slide duration you'll first have to decrease the object timelines or to attach them to the end of the slide (CTRL-E). If there is no real staggering in objects this will be the fastest way (but still slide/slide:
look for an object of each style/type, and set its timeline to 2sec, than you can use the small curved arrow in the top right of the Timing accordion to apply to all objects of that style/type
then slide/slide select the slide timeline and use the shortcut SHIFT-CTRL-LEFT to decrease the length with 1sec
Lilybiri

How do i get an iphone 5's battery to last. Just bought a brand new one. Changed all the settings as in location services, dim display push mail, yet it doesn't last half a day.

Just bought a brand new iphone 5. But the battery doesnt even last. I have changed all the location services n all. Still it doesnt last even half day. And the usage isnt heavy. My wife is using it, so it doesnt have a heavy usage. Tried every thing.

Gidday, I had the same problem when I bought my iPhone 5. If you drain the battery right down to nothing until it is completely flat and then recharge it 100%, drain it again, and fully charge it you should be good to go.
Hope this works.....

All activity prices are manually entered (Message no. KP211 )

Dear All,
I have maintained Activity Rates through KP26. On Activity Master I have set Act. price indicator = 5.
Now when i am executing KSII it is giving me error message as :
All activity prices are manually entered
Message no. KP211
Diagnosis
All activity prices in controlling area FLGP, fiscal year 2011, and version 0 were determined and set as manually entered prices.
In actual price calculation, all plan activity prices, meaning those calculated automatically (activity price indicator 1 and 2) and those set manually (activity price indicator 3), are treated as if they have been set manually.
System Response
The SAP System cannot calculate activity prices automatically.
Processing is cancelled.
Procedure
Check your activity type planning. To calculate the activity price automatically, you must set the activity price indicator accordingly.
Proceed
Please let me know if I need to done any additional settings.
Br, Vivek Srivastava

Hi Vivek,
"The error message KP211 is display by the system due
to the SAP System cannot calculate activity prices automatically.
(can you review the settings in the system).
The procedure that you have to follow is to review transaction code
KP26 and your activity types.
From viewpoint of actual price iteration all plan prices are political
in the sense that 'prices does not change during actual price
iteration'. If all activity types have indicator 1 then everything
will be evaluated with plan price in actual. So actual price iteration
has nothing to compute because no price will be changed. You have to
set price indicator to 5 or 6 in actual price indicator for at least
one activity type in order to calculate the actual activity price.
When you change some activity type master data in transaction KL02,
these changes take effect in all relevant tables, BUT please notice
that the values of TARKZ, TARKZ_I etc. are only DEFAULT values for
activity planning and therefore ONLY READ ONCE when the relevant
planning set is created. Subsequent changes to the master data (default
value) take not effect in the planning sets. You have to change the
values in every single planning set manually."
You indicates that for the activity types you have set in the master data
actual price indicator to 5 (Actual price, automatically based on
on activity). But this is only a default value and can be overwritten
for example during planning.
Please see table COKL for cost center / activity type if have an empty field for
the actual price indicator. Thus the system only finds the plan price
indicators during price calculation and message KP 211 is justified if
you consider the following part of the long text:
In actual price calculation, all plan activity prices, meaning those
calculated automatically (activity price indicator 1 and 2) and
those set manually (activity price indicator 3), are treated as if they
have been set manually.
In order to run KSII as expected by you, you have to execute trans.
KP26 for the cost center and activity type using layout 1-204
(Activity Types: Indicators).
Here you can set the actual price indicator to 5.
Afterwards there should be no further problem with KSII.
I hope helps,
Regards,
MLM

System Folder errors after I changed all permissions on HD to read & write

Hi,
Two things may have caused probs on my new 2010 iMac (Snow Leopard), and Applecare is shut so I would really appreciate some help as I have urgent work.
1) INCORRECT PERMISSIONS
I have been stupid. I clicked on Macintosh HD and changed all permissions to read & write because I wanted to be sure I could open and edit all documents on other computers.
I ran Disk Utility Repair Permissions from the install disc, but I am still getting system error messages, and my HP printer won't work.
The first message, in Repair Permissions, said: Warning: SUID file System/Library/Cores has been modified and will not be repaired. I have read a support doc on this which says no need to worry but I don't like it and would like to fix this.
More importantly, my HP printer won't work, displays error beside the document in print dialogue box.
Deleting the printer and readding it didn't work, so I downloaded new drivers and tried to install them, which is when I got the second system error message: System extension System/Library/Extensions/BJUSBLoad.kext was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for an update.
I checked the permissions on the file and they were still wrong despite Repair Permissions, allowing everyone to read & write. So I have now clicked on the entire System folder and changed the permissions to: System read & write, admin read only, everyone read only.
Will this fix it or do I need to do something else, such as check ownership, to make sure all permissions on the computer are now correct?
2) MEMORY STICK SHUT DOWN MY IMAC
Additionally (though I don't think this had anything to do with my problems), I inserted a Sandisk USB memory stick the other day and it immediately shut down the computer. When I inserted it into my Macbook it initially rejected it and gave me a message saying the device wanted too much power so it had ejected it to prevent damage to my computer. When I tried again it was OK. I totally reformatted the stick in case there was something harmful on it, but should I now bin the stick as faulty? Scared to use it again.
3) IS IT BEST TO REINSTALL ENTIRE SOFTWARE?
If I do a reinstall of all the software from the install disc, will it wipe out all my data, such as Mail, documents, bookmarks and other apps?
I would back-up, but if I try and back up files on my external drive it will automatically do a Time Machine back-up and I don't want to do that in case it backs-up all the corrupted files. Otherwise, I wouldn't mind starting again just to be sure all is well.
Expert advice would be very much appreciated.
Thank you
Sarah

Oh, silly really. I was in a hurry and working on docs that I needed to take to the office and open on another computer there.
But when I checked the permissions on the doc it said I could read & write but everyone else was read only.
I thought if I opened it on another machine I'd be stuck with read only access and not be able to work on there. I think I couldn't change it, so I thought to avoid any future problems like that I would change everything on machine!
Yikes. Won't do that again
Sarah

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Get Info "Change All" button doesn't keep the proper "Open With" app

I have a small but annoying problem that appears in Leopard 10.5.2 (been there since original 10.5.0 install) that I have tried to troubleshoot but can't solve.
The problem is:
-With some of my file types, the wrong "Open With" application is displayed when I view a Get Info for that file type. So to fix this, I open a Get Info window on one of those types of files, and choose the PROPER default application in the "Open With" slot. This works, and then the new proper application name now shows in that slot. So then I click the "Change All" button and apply to all files of that file type. I receive the warning that I will be changing ALL files of that type. I choose "continue" because that is what I desire.
However, once I do that, (click Change All, then Continue button), the old, wrong application name jumps back the Open With slot! So the new, correct application choice doesn't "stick".
Oddly enough, it sort of DOES work, because if I then re-click in the Open With slot, although the old, the wrong application is back listed again, if I look up above that name, then my actual desired application is listed in a list, and it has the word (Default) beside it.
So if I do actually now double click any file of that type, then the proper application DOES launch and open the file.
But why does the Get Info window still display the wrong, non-default application in Open With? And furthermore, this causes all file types of that kind, to display the WRONG icon in any Finder window. They of course display, the icon of what is in the Open With slot list.
I am having this problem only with two file types and apps. (Cubase and Pro Tools---DAW audio apps). All of my Cubase files display a Pro Tools icon, and show as Open With: "Pro Tools" when of course it should display Open With: Cubase. As stated in the Open With list, Cubase is indeed there among other programs and it has the word (Default) beside it. So it sort of works when launching files. But I still cannot get Cubase to "stick" and stay in Open With after Change All!
Can anyone offer any tips on what might cause this and what fix is needed?
Thanks so much in advance!
Wade

Well, I tried rebuilding the Launch services with the command listed but still no luck. After having no luck with that and deleting caches, etc....I also, went to my home (user) directory and in Preferences, I deleted the com.apple.launchservices.plist file. I restarted and checked and still the same result.
Also, I want to emphasize again that the file type I am discussing DOES actually launch with the correct application. (Cubase files in my example).
But it is just annoying that ALL of my Cubase files display the Pro Tools application icon, and in Get Info they are listed to open with Pro Tools. But they actually do launch Cubase if double clicked.
And one other VITAL note....if I open Get Info for one of these files, and change the Open With from Pro Tools to Cubase....then that choice DOES "stick" and retain. (if I "don't" also click Change All)
It's only when I click "Change All" that it DOESN'T stick and the list selection jumps back to Pro Tools. I hope that may offer some clarity.
Thanks for the tips but I am still back at square one.
Wade

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

When saving a PDF not all text is displayed

We have a user here whom uses Adobe Acrobat X Pro. When she opens the PDF in question, all text is displayed fine, however, if she makes a small change and re-saves the document then a lot of the text is not displayed - This will also happen if she attempts to insert pages from the Source PDF into the destination PDF.
I have tried to repair the adobe install via the Help menu and have also given the application a full reinstall with no luck.
Here is how the text is displayed when just opening the PDF;
Here is where things go wrong, when she tries to Re-save this PDF the text is displayed as follows (again, the text will go like this if she tries to insert pages);
Any insight/assistance appreciated
Thanks!

Hi miraxes,
Please email me ([email protected]) the pdf file so that I can check at my end.
Regards,
Rave

How do I change all the numbers in my IP address?

When I hit IP address release and then IP address renew it just changes like 3 numbers and I want to change all the numbers.

the question itself is confusing...
are you talking about changing the whole IP segment?
Just the IP address of your computer?
Assigning an IP address plays a BIG role in networking...
hope you give more info to your question...
Yesterday is history. Tomorrow is mystery. Today is a gift.

[svn:osmf:] 15505: Fix image smoothing, which had been broken as a result of some changes to how the display object of an ImageElement is exposed .

Revision: 15505
Revision: 15505
Author:   [email protected]
Date:     2010-04-16 09:29:26 -0700 (Fri, 16 Apr 2010)
Log Message:
Fix image smoothing, which had been broken as a result of some changes to how the display object of an ImageElement is exposed. Add integration test.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/elements/TestImageElementIntegration.as

That's a comment in the file. It has no effect at all.

Whenever I plugin an iTunes device to my computer the volume of all active applications lowers. What would cause this?

Basically any iDevice I plug into my PC lowers the volume of all active applications to about 10% no matter its previous level. I've tested this with several iDevices and they all act in the same manner. I've reinstalled iTunes and tested this out on a fresh install of Windows 7 Ultimate 64-bit.

I actually figured out the fix for this. The issue was how Windows interacts when a communication device is plugged in. If you follow the path Control Panel -> Sound and click on the communications tab (in Windows 7) you can change event "When Windows detects communcations activity: " to not lower any of the sound. I hope this helps! It plagued me for a good few months before I realized it.

Is moving all active ports to another VSAN disruptive?..

Hi! I moved all active ports to another VSAN and this caused a server to failure. I know that this can be because of the small time-out values at the operating system or bad multipathing, but how large a time-out can be in a such reconfiguration?.. What if the server can't survive any storage loss and we move server and storage array ports to another VSAN? I wonder if it can be done without any traffic interruption...

Hi Artem,
Changing server from VSAN is a disruptive process for each path you're acting on: that means if you're not having dual fabrics and proper multipathing configuration, the server will lose access to its LUN for a certain amount of time. Depending on the operating system you might expect various behaviors (kernel panic, SCSI errors, CPU in I/O wait until timeouts,...). Consider it even more restrictive when booting on SAN or when swap memory is also on a SAN LUN.
It's always good practice to work one one fabric at a time by disabling the path attached to it from the OS perspective (if multipath software is not set in a failover mode).
Changing VSAN membership for a FC port on the MDS9000 means that the initiator HBA has to log (FLOGI) into a new VSAN where the DomainID is different from previous VSAN, so its FCID will change also. It is same effect as moving fibers to another physical SAN from the host perspective.

Change all activity to Display in a role

Similar Messages

Maybe you are looking for