Change date field to a default date

Hello,
my requirement is such that i need to have a Valid to Date as 31/31/9999,
I tried using left(systime(0),11) which will give me for eg, 12/10/2010, which i need to change to 31/31/9999
How do i achieve this.
thank you in advance

Hi Abhishek,
1stly, please correct your default date as there is no month of 31.. in MM/DD/YYYY. Mention the exact default month are you looking for. I am assuming you want your Default date as 12/31/9999 for DateField.
So if you want to populate DateField as 12/31/9999.. Create an assignment and assign DateField as assignment field and in expression write 3067670, it will populate automatically DateField as 31 Dec 9999 in your required format.
Kindly mark thread as answered if it solves your query.
Regards,
Mandeep Saini

Similar Messages

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
How can i do this?

Hi,
You can select the Payment Term at PO Header Level.
When you book an invoice, that Payment Term will automatically defaulted to Invoice.
You can define Payment Term in AP.
Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
Payment Terms (Oracle Payables Help)

"Posting Date" field blank by default

Hi!
Is there any way, in transactions FB60 and F-43, so that field "Posting Date" is displayed blank whenever the user executes them? By default, this field displays the current date.
Thank you
Lucia

Hi Lucia,
The SAP standard defaults the value of the posting date automatically and it is not possible to remove this default value in BUDAT.
However, it may be possible to use a substitution to get your desired result. You can check note 42615 for information purposes.
Best regards,
Cintia

Setting a date field to a default value if it's left blank by the user?

I want to set a date field by default to 31/12/2499 if the user doesn't input anything. I want to do this in WHEN-VALIDATE-ITEM trigger .
How should my code be like please ? Is it something similar to this :
IF :HS_HEADS.DT_TO IS NULL THEN
     HS_HEADS.DT_TO =:'31/12/2009';
ELSIF
     ALERTS.STOP_ALERT('Date must be greater than or equal to system date', choice);
     RAISE FORM_TRIGGER_FAILURE;
END-IF;
Thanks.

Isn't it too late to set default value in WHEN-VALIDATE-ITEM? It will not fire if user doesn't input anything
I would set properties of HS_HEADS.DT_TO as following:
Data Type = Date
Initial Value = 31/12/2009
Format Mask = DD/MM/YYYY
And in WHEN-VALIDATE_ITEM just validate that date is not less then SYSDATE
IF :HS_HEADS.DT_TO < trunc(SYSDATE) THEN
-- alert
RAISE FORM_TRIGGER_FAILURE;
END IF;BTW, why do you default to hard-coded 31/12/2009? Is your application only good until end of the year?

Display difference of a Date field and today's date in the query

hi experts,
I have a query which has a date field called 'Effective Date.'
I just need to a add a column in the query that shows me the diffenrence between 'Effective Date' and the date the query is run (key date).
Do i need a custom exit to accomplish this?
The new column can either display the number days elapsed from 'Effective Date' to the key date or it can also display Number of Years/ Months / days.
Any ideas?
Thanks,

Check this if it helps:
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html

Using a Date field to calculate another date equalling + 6 'Working Days'

I am trying to provide a schedule return date based upon an Issued Date value
The problem is that I only want the estimated return date value to include working days (6 to be precise), which are Monday to Friday.
Any assistance in disregarding weekend days from my results would be greatly appreciated

Try this
DateTimevar IssueDate:={IssueDate field here};
DateTimevar Scheduledate;
Numbervar WeekEnds;
Scheduledate:=DateAdd('d',6,IssueDate);
Weekends:= DateDiff('WW',IssueDat,Scheduledate,CrSaturday)+DateDiff('WW',IssueDat,Scheduledate,CrSunday);
Scheduledate:=Dateadd('d',Weekends,Scheduledate);
IF DAYOFWEEK( Scheduledate) = CrSaturday THEN
Scheduledate:= DATEADD('d', 2, Scheduledate);
IF DAYOFWEEK( Scheduledate) = CrSunday THEN
Scheduledate:= DATEADD('d', 1, Scheduledate);
Scheduledate
Jyothi
Edited by: Jyothi Yepuri on Sep 3, 2009 6:55 AM
Edited by: Jyothi Yepuri on Sep 3, 2009 7:07 AM

Date Field Input Box in data table does not provide date picker???

hello everybody,
In my JSF page i have a data table in which i have a input text field of date type. my problem is for the input box date picker is not available. though i can have date picker for a date filed outside the datatable. another problem is for the date filed validation in the browser is not available too. so how can i get the helper calender and browser validation? plz help. ASAP
with regards,
sailajoy
Edited by: sailajoy on Jan 7, 2009 12:42 PM

You are absolutely correct Sir.
I am using IBM Websphere for developing JSF and the component is
<h:inputText id="txtBirthDt" size="11">
<f:convertDateTime pattern="dd/MM/yyyy" /><hx:inputHelperDatePicker />
<hx:inputHelperAssist validation="true" errorClass="inputText_Error" errorAction="selected"/>
<hx:validateDateTimeRange maximum="#{now}" /></h:inputText>
Both the helper calender and the validation part for the date field is not working if it is included in data table. Please Help.

Adding new date field to already loaded data target.

Hi,
we have a cube containing date feild such as 0CALMONTH. the data is being loaded to the cube. now they have added new date feild (0FISCYEAR). how to get data to this feild. there is no data coming from source system for this feild. please can any one tell me how to include this feild and load data into it.
with regards,
sreekanth.

Sreekanth,
If Record creation date is the right field for deriving fiscal year, Why cant you derive the year from the date...by using automatioc time conversion...?? In update rules...??
For exising data, you can do loop back to populate the data. see the below doc, for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f421c86c-0801-0010-e88c-a07ccdc69601
Hope it Helps
Srini
Message was edited by: Srini

How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
be done through sharepoint desginer / out of the box.
thanks.

Congratulate you got the solution by yourself. I am new to a
WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
calendar date selection did me a great favor. Cheers.

Is there a way to calculate a date field based on aother date field in sharepoint list?

In a SharePoint list, I have a 'Start of Use Date' and need to ensure the 'Review Date' is no more than 14 months after the 'Start of Use Date', but can't figure out the formula. Can you help?

You can cast the field values in the SPListItem to DateTime objects and call the AddMonths(int) function to see if the two are more than 14 months apart. For instance:
DateTime startOfUseDate = (DateTime) item["Start of Use Date"];
DateTime reviewDate = (DateTime) item["Review Date"];
if (startOfUseDate.AddMonths(14) >= reviewDate)
// Review Date IS NOT more than 14 months after Start of Use Date
else
// Review Date IS more than 14 months after Start of Use Date
Danny Jessee
MCPD - SharePoint Developer 2010
MCTS - SharePoint 2010, Configuring
dannyjessee.com/blog

When entering credit card details, is the date field for the start date or expiry date? [was: payment]

I had my bank card accidently cancelled by my bank. I have entered the new card number into payment section and it is asking for a date. Is that date the time the card began or finishes - the section does not make is clear. Thanks

I know of no banking or credit company on the planet that would ever ask or need to ask about the "beginning" date on a crdedit or debit card.
I'd have no way of replying to such an absurd question if I were ever asked.

Default date-sysdate....

i have a booking date field in a page.
when i run a page, that booking date field should have default date as sysdate.
i gave sysdate in default value tab.
but it show the word 'sysdate' it doesnt show in date format.
how to do this?
pls help.

Did you set the Default Value Type to "PL/SQL Expression" ?
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

Risks of changing the field length of data structure of a Cluster Table

Hello,
We are on ECC 604 and had implemented HR & Travel Management. Reporting on these applications is done in BI. We use ESS and & Mobile Travel for time, travel expenses, etc and use PCLn clusters.
There is business need to change the length of a field from 20 to 40 for the data structure PTK** of cluster table PCL1.
We are exploring various options to avoid core modifications.
We are also assessing the risks associated with changing the field length.
I am asking you for your opinion about the risks associated with changing the field length of a data structure of cluster table.
Thanks & Regards,
Manoj K Pingali

Recently, we came across the same situation where we had to change the length of a field. Let me explain you what precautions we had taken during that time.
1. Apply the where use list of that table/ Field and check whether it has been used in some program and FM or not. If yes then check one more thing that check the TYPE of another variables on which system has populating data (move, write or in FM parameters). if you will not consider this then you can land you in big trouble. (Conversion dump)
2. Ask the basis to take a dump of the production, quality and data for the safer side if something does not go right.
Now, you can do the changes in your development system and then adjust the database and see the impact of it.
Hopefully, you will not come across any difficult situation in this changes.
Thanks.
Anurag

Document date field (GOHEAD-BLDAT) setting in transaction MIGO

Hi,
I want to set field GOHEAD-BLDAT as blank in Transaction MIGO but not defaulted by the system date (sy-datlo). I have used transaction OMJX to set this fields in required status, but this field in transaction MIGO didnu2019t run as I expected.
How can I set up this field blank ?
Regards.

Hi,
In the R/3 Standard for transaction MIGO, the Posting date field is
always defaulted by the system date (sy-datlo) because it is hardcoded
in the program.
You can check it in the main program SAPLMIGO, source code of LMIGOKH1:
      IF ps_gohead-bldat IS INITIAL.
        ps_gohead-bldat = sy-datlo.
      ENDIF.
    ENDIF.
    IF ps_gohead-budat IS INITIAL.
      ps_gohead-budat = sy-datlo.
    ENDIF.
I am afraid I must therefore confirm that, if you desire to change this
default value for the posting date in transaction MIGO, you will need
to modify the standard coding.
BR
Nadia Orlandi

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

Change date field to a default date

Similar Messages

Maybe you are looking for