Change default X server to tty1

The default X server starts at tty6. How to change it to tty1 or others?

How exactly do you start it? https://wiki.archlinux.org/index.php/Start_X_at_Boot
exec xinit -- /usr/bin/X -nolisten tcp vt7
'vt7' means it will start on tty7.

Similar Messages

How i can change default Deployment server in Creator 2 ea 2.

Hi
Thank you for reading my post.
I want to change Creator 2 ea 2 , deployment server
I used to use centeralized deployment server . and i want to change Creator server , and set it to that server.
How i can do this ?

Here is what worked for me.
changing the default application server.
1) Verify that JSC2 is creating a WAR file in the project's dist directory.
2) Download the Sun Java System Application Server 8.1
3) Install the application server on another computer. E.g. 192.168.1.110
I changed the default port from 8080 to 80 because I wanted to port forward.
Don't know if this is required.
4) Start the server! Browse to 192.168.1.110:80 and verify the server started.
5) Run the admin console (192.168.1.110:4848) and manually deploy the WAR file
If you can't do this, it wont go.
Your browser might appear to get stuck. Wait for it to finish! Check your logs for errors.
If you get stuck, doublecheck that the server directory isn't write-protected.
Test with a browser 192.168.1.110:80/ProjectName
6) Tell JSC2 about the new server
Servers Tab -> Remote Servers -> rightclick -> Add Remote Server...
Select the right kind of server (Sun Java System Application Server 8.1)
Admin Host: 192.168.1.110
Admin Port: 4848
Username: admin or whatever
Password: shhhhh!
7) Configure JSC2 to deploy the project to a different server during testing.
Projects Tab -> Right-click the project -> Properties -> Run -> select the new server.
8) Click the little green triangle and it should deploy and start a browser to test.
Trouble-shooting:
- Problems will occur if you attempt to do things to fast. Don't cancel out of operations.
- Don't modify any of you build.xml files
- Don't compress the war file
- Restart everything if you hit a problem
- Don't ask me, I don't know anything about it. I just fiddled with it till it worked.
- Turn off Netlimiter! (or any other bandwidth manager)
- Turn off Antivirus monitoring software (stuff runs faster - security rish though)

Changing default DNS Server

Hi,
I'm a new BT broadband customer.
Like most, I have a house full of pcs and gadgets connecting to the Internet. Many belong to my children. Naturally, as a responsible parent, I want to do my utmost to limit their access to inappropriate content.
The basic first line of defence is obviously to have dns filtering.
However, my Home Hub 3 won't let me change the default dns gateway to some filtering service like OpenDNS, nor is there anything to suggest that BTs own dns service has this capability.
Can you please, as a matter of the greatest urgency (I believe that my children are currently able to access the most inappropriate content on their mobile devices), tell me how to get this in place.
Thanks

Many thanks for the replies on this thread - they are much appreciated, especially the email address.
As I said, I would regard dns filtering as the first line of defence. And a very necessary one, as my main concern is with my kids wifi connecting mobile devices.
What interests me about all this is that, as people have pointed out, there are ways to set the dns gateway per device. To my mind that completely undermines any argument for not allowing it to be changed on the HH.
Why might BT want to disable dns setting in the Home Hub?
i) Because they can then offer valuable dns based services, such as 404 redirection?
   But users can override the dns setting on each device!
ii) Because it is one less thing that could be miss-set, so cutting down support calls?
   But users can override the dns setting on each device!
iii) Because Government might ask us to ban access to certain sites and controlling the dns lookup would help us do this?
    But users can override the dns setting on each device!
Am I missing something here? Is there actually a really good reason - because I would shut up if there was one!
Meanwhile, my kids remain unprotected for a 3rd day

How to change the default mail server??? Please help.

I need to change the default mail server to my yahoo account. When I had my PC this was easy but I cannot figgure it out on the MAC. I am in China and I need to inform my insurance company of some information or they are going to cancel a policy. When I go to their site for email contact what pops up is the apple email, which I do not have an account for and ofcourse does not work. Their email address does not show and I cannot find it anywhere so I need to change the default to my yahoo account. On my PC this was easy and when I went to a site that had a contact but no email address, my yahoo account would come up. I hope I am explaining this correctly. I really need to do this fast as the letter I got took some time to get here and I just returned from some field work so I have about 2 or 3 days to get the information to them. Thank you.

John,
This does not demonstrate anything for me, since it brings up a Compose window for Mail, with my preferred account as the From address. This happens whether I access with Safari, or with Firefox.
The point that I am trying to make, is that in OSX, there is no way to have web mail access become the default mail method -- it only works with a true mail client, for POP, IMAP or .mac access on your Desktop.
If you have the type of yahoo account that can be setup for POP access with Mail, then when you click, you can choose your yahoo address as the From address to send from.
Of course you can insert the address in a new message with your Yahoo web mail, but I have understood you to want to have the message start containing the info from one of the pages on the site?
See the discussion at the following link, for setting up a Yahoo account in Mail:
http://discussions.apple.com/thread.jspa?messageID=2760483&#2760483
Ernie

How to change default Server NFS version in Solaris 10 ?

How to change default Server NFS version in Solaris 10 ?
I need to change default version of NFS server version, currently i have NFS_SERVER_VERSMAX=2, for changing NFS version i changed this variable in /etc/default/nfs, but still its using version 2,
Please let me know where else i need to change./
Thanks a lot in advance!!!

Did you change the /etc/default/nfs on the server or on the client?
What is NFS_SERVER_VERSMIN set to? The NFS server is allowed to use any version in the span of NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX.
NFS_SERVER_VERSMAX=4
The default of NFS_SERVER_VERSMIN is 2.
And, as mentioned, you will have to restart your NFS server for changes to take effect.
.7/M.

VS 2013 - SQL Server Projects - Can I Change defaults for SQL Servers to use and the paths to DB-files?

Hi all,
when a create a SQL Server Project using "File > New ...", I find the following settings defaulted:
SQL Server is (local)\Version12.0 and
DefaultDataPath, DefaultFileprefix and the DefaultFilename(s) for MDFs and LDFs point to the Project directory.
Initial settings of file size and increments are also not settable but defaulted.
Because my projects have to verify performance by testing with large volume of data, we have to use a different SQL Server with files stored on that Server. The Project settings have a button to changes DB properties, but these are not part of that
dialog.
So I spent some fruitless hours in vain to find a way to change the project's connection to my development SQL Servers.
How to cope with that?
Thanks in advance.
Regards Uwe

Hi Caillen,
thanks for Your response. I have to apologize for being a little late with my answer. I'll try to clarify my case more precisely:
This is surely a topic related to VS2013 handling new "SQL Server Database Projects". When one clicks "OK" the following steps are executed by VS2013 (surely controlled by standard templates or the like):
VS2013 creates the new project in a selectable directory and uses the projectname as a subdirectory whre the directory elements (*.sqlproj, bin\, obj\) where later all the *.sql are placed, too. This is normal and expected.
VS2013 creates a new database with its DB-files
and attaches it to "(localdb)\ProjectsV12". The name of the database is the name of the project. The path to the DB-files (*.mdf and ldf) and their sizes are also defaulted to small values. The DB-server and the
path to the DB-files is taken from the registry (!) HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0\SSDT\LocalDbDatabaseFilePaths. I don't know when and by what tools these values are set.
The path to DB-Files is typically also the path to the projects. The (local)-server places all system database files in the User\<user-ID>\Appdata\.. tree. Which is OK for small databases. The templates extracts some data from the DB-file path and
places it in the deployment SQLs to populate the SQLCMD variables DefaultDataPath, DefaultFileprefix and the DefaultFilename(s) which are generated when pressing "Executed" or "Debug" the project.
My problem is that we have to test database performance with larger volumes of data (e.g. two million rows and more). These cannot be stored in the User-path but must be handled by some kind of professional DB-Manager on various storage devices. When everything
is tested, the publishing function of VS2013 will extract the structure and you are done incl. all the performance taming things.
The dialog from the project properties can change to a different Server, but that server does not know your project database. The server and the DB-Files should be specified by the developer before VS2013 creates the database.
So the right forum would be a forum, where people developing SQL Server solutions with VS2013 are reading the questions.
Thanks again for your patience.
Regards Uwe

Changing the default deployment server.

Hi.
Is it possible to change the default deployment server in studio Creator? I�m developing some portlets, and on my computer it takes 3 minutes to deploy a new portlet to my local host, but only a few second to deploy it to a remote server.

Hi,
I guess, right now only way is to deploy to remote server( sun appserver and sun webserver) or export the WAR and deploy to any other web/app server
MJ

How do I changing the default WIKI Server name on OS x Lion Server?

How do I changing the default WIKI Server name on OS x Lion Server? Enterprise solutions suggested I post this question here to get a direct answer. I have searched everywhere... This would be the META TAG On the top of browsers...

I went looking for this answer, to no avail.
Solution I used:
step 1 - Navigate to the folder /usr/share/collabd/coreclient/locales/en.lproj/ and open the only file there called default.strings.
step 2 - somewhere around lines 74 & 164 you will see the default title "OS X Lion Server". I'm sure only one of the is required to be changed to adjust the title on the window, but I changed both to my desired title. Save and close. If asked for authentication, enter you administrator details.
step 3 - restart the server (or wiki service may work too)
step 4 - done and your Wiki welcome page should show the new title
Finally I have a bookmark that means something by default.
Hope this helps

Thunderbird will not send email through default, outgoing server.

I have two outgoing email servers: Optomum (NY) and TWC (North Carolina). In North Carolina TWC worked perfect. Now I am in NY and changed the default setting for the outgoing server to Optomum. This is the error message I get, “Sending of message failed. The message could not be sent because the connection to SMTP server mail.twc.com timed out. Try again…” At first I thought that a change to the default outgoing server would not take effect until Thunderbird was shut down and restarted. That was not the case. Then I thought to reboot computer. Still NG. Although Optimum is set as default, Thunderbird still wants to send through TWC. Need fix.
jk

I think you mis understand the default. It is usaed when the one assigned to the account can not be determined.
Tools menu (alt+T) account settings > select the account name and change to the appropriate SMTP server in the drop down list.

How to change default compile directory tmp_ejb?

Dear all,
Someone knows how to change the default directory "tmp_ejb...." in WebLogic Server
7.0?
This is the default directory where WebLogic Server 7.0 generates and compiles
the EJB's declared in config.xml.
I try to specify the attribute TmpPath="ANOTHER_TMP_LOCATION_DIRECTORY_FOR_EJB"
in the EJBContainer node but still doesn't work.
The same thing happens when I test this attribute on EJBComponent declaration.
Someone knows if there is an enviroment variable that specify this tmp_ejb location
path?
It's false that the tmp_ejb is located where the config.xml file is placed.
I have 3 weblogic servers and they haven't the same behaviour.
Someone can help me??????
Thanks.

I ran into the same problem and was wondering if you got an aswer the question you posted in BEA's news group: "How to change default compile directory tmp_ejb?
Thanks

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

After changing 'MS SQL server' service's user name SDAC doesn't work properly

I've changed 'MS SQL Server' service user name
from .\admin (have had such already) to network_services
and now my oracle linked servers to Oracle instance stopped to work.
Namely, 'Cannot create an instance of OLE DB provider "OraOLEDB.Oracle" for linked server Ora_RO'.
In event log i see next:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2206CDB0-19C1-11D1-89E0-00C04FD7A829}
and APPID
{2206CDB0-19C1-11D1-89E0-00C04FD7A829}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
So, MSDAINITIALIZE Class fails to start. I cannot locate this service under dcomcnfg. Could you help me?

The error seems to be clear what is causing the issue, check this link to fix this issue
Here the scenario is with SharePoint instead oracle so you can make out:-
http://www.wictorwilen.se/Post/Fix-the-SharePoint-DCOM-10016-error-on-Windows-Server-2008-R2.aspx
http://social.technet.microsoft.com/Forums/en-US/696204d5-b07e-46db-a785-737ea57b8da2/distributed-com-error-message
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Change default BW Client

Hello All,
I want to change my existing default BW client XYZ in system ABC to another client which already exists viz., MNO.
The System in Netweaver 04.
SAP_BW Release is 350, Patch level is 0009
BI_CONT Release is 352, Patch lebel is 004
Database is Oracle 9 on Win Server 2003 server.
Please do suggest me the steps and precautions to be taken before proceeding.
Thank you All,
Bob

Hi Bob,
Default client as default login client or as RFC connection???
Change default login client at RZ10 parameter login/system_client
if you're talking about RFC connection just go to SM59 in the target system and change the client for the BW RFC connection...
You may want to give us more details.
Regards
Juan
Please reward with points if helpful

Change default Windows background during deployment

I have a Windows deployment server up and running and deploying custom Windows 7&8 images which all work fine. I want to be able to change the default Windows background to a custom image during deployment so when a new user is created and logs in locally,
my image is displayed rather than the default one. I know this can be done by changing an entry in the registry, but I would like some help in creating a script to do this during deployment and also where this script would have to be placed and how to run
this. I am a noob at scripting and any help would be appreciated! ;)
Thanks in advance

I am using the process documented at the link below in my builds today with a lot of success. In addition to setting the background for every user, it will also allow for setting the colors and accents. Pretty good stuff from the guys at CoreTech.
http://blog.coretech.dk/hra/change-default-windows-8-1-wallpaper-color-scheme-and-lock-screen-background/
.bill
Regards, Bill Moore @BMooreAtDell

Change default X server to tty1

Similar Messages

Maybe you are looking for