Change GL Account from Open Item Managed into non-Open Item Managed

In the former R3 environments, release 4.6 there was the program RFSEPA03 to turn off open item management.
However, in ECC 6.0 this program is blocked and there seems to be no possibility to change a GL account back to non-open item mgt.
Please comment,
Kind Regards WR

Yes .. I Agree with you ...
Actually I accidently, did not check the GL first, but run the ZRFSEPA02 first .... because of that, my GL is check as an open item and as a recon account too ...
any solutions ?

Similar Messages

  • Reset & reverse document with open item managed and none open item managed

    Dear forum,
    I would like to confirm the below.
    If i have a posted document where the double entry has open item managed account and none open item managed account and where the open item managed account is cleared, how can i reverse this document.
    The problem now is FBRA cannot reset and reverse (as the document partly has none open item managed account) and FB08 also cannot reverse (as part of the account is open item managed account and it is cleared).
    Besides manually reverse via FB01, any other method?
    Thanks
    Moderator: Please, avoid asking basic questions

    Which document are you trying to clear using FBRA?  You should reset the "clearing document" using FBRA; not the original document that has one open item and one non-open item.  Once you reset the clearing document using FBRA, you should then be able to reverse the original document (the one that has one open item and one non-open item) using FB08.

  • HT1918 Change iTunes account from Master Card to the Free account

    Change iTunes account from Master Card to the Free account

    You won't be able to redownload any of your UK purchases whilst you are in the US, you have to be in a country to use its store - and you can't merge purchases from two accounts or countries. No content should be removed from your device or computer's iTunes library if you change the country on your account, or create a new account and log into it.

  • Can I change my account from US store to AU store when I still have credits?

    Currently there are still $17.32 (US Dollars) in my account. However, I am living in Australia now, it is somewhat inconvenient when I need to purchase some local apps. Therefor, I want to change my account from US to AU.
    There are few concerns I have:
    1. How can I deal with the remain balance? Can it transfer to AU$?
    2. How about the previous purchased apps? Are they still upgradeable?
    Many thanks.

    1. Click here and ask the iTunes Store staff to either put the balance back onto the cards or zero it. It can't be transferred into Australian iTunes Store credit.
    2. Yes, they are.
    (111231)

  • I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

    I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    iOS- How to transfer or sync content to your computer
    iTunes Store- Transferring purchases from your iOS device or iPod to a computer
    If you have non-purchased content then you need to use third-party software to transfer it to your iTunes Library - Phone to Mac - Pod to Mac.

  • I want to change my account from US to UK

    I want to change my account from us to uk but the problem is I still have some money in the account around 0,9$

    You can try contacting iTunes support and ask them if they can remove the balance so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I want to change the account from the creative cloud i cant cuz he said verify your email address !

    i want to change the account from the creative cloud i cant cuz he said verify your email address !
    its a fake email i want to change it i have a another account but i cant log out with that account

    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
    or
    Chat Now button near the bottom for Activation and Deactivation may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

  • Change my account from family to individual?

    how do I change my account from family to individual?

    Hey there!
    It sounds like you would like to know how to leave a Family Sharing group with your Apple ID. This article should help you do that, named:
    Leave Family Sharing - Apple Support
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Change my account from country to other ..

    i want to Change my account from us to my country  ..
    in itune its force me to spend my money ..

    If you are no longer in the US then you can try contacting iTunes support via this page and ask them if they can remove the balance from your account :http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • HT2731 How can i change my account from US to Ireland setting. I can get apps as my account says US? Pls help rhanks.

    HOw can i change my account from US to Ireland setting as i cant install apps in Ireland. Pls help

    Change iTunes Store Country on an iDevice
    1. Tap Settings;
    2. Tap iTunes & App Stores;
    3. Tap View Apple ID;
    4. Enter your user name and password;
    5. Tap Country/Region;
    6. Tap Change Country/Region;
    7. Select the region where you will be located;
    8. Tap Done.
    Also, see How to Change Your iTunes Store Account Location | eHow.com.

  • Converting Line item dimension to non line item dimension

    I have some BI 7.0 issues.
    For some of the existing cubes I had certain dimension as line item dimension  - I wanted to add some characteristic to these dimensions. I am able to do this change and activate the cube.
    But we noticed that the data which is a part of the line item dimension is lost. If the data set is small then we could have done a reload but in my case the volumes are huge, so reloading data is not a possible solution. We actually did the same exercise in BW 3.5 and noticed that the data is intact. We have looked into OSS notes and not found anything so far.
    Kindly help me to find a way to convert Line item dimension to non line item dimension in BI 7.0 without loosing Data.

    Hi,
    the only way to do is to generate a new cube and transfer the data from the first cube via transformation rule. A conversion within the existing cube is not possible.
    Regards,
    C. Aslan.

  • What  is use of  Item Category N(non-stock item) in BOM creation

    Dear Experts,
                       What  is use of  Item Category N(non-stock item) in BOM creation ?
    regards
    rajakarthik

    Hi,
    This item category is used for components which are not kept in stock if they are used in a bill of material (BOM). Non-stock items can be entered in the BOM with or without a master record. To enter a non-stock item without a master record, you must simply enter a descriptive text.
    When you use this item category, the system automatically creates a purchase requisition for these components,
    Special functions
    The following functions are supported for non-stock items
    • You maintain purchasing data for non-stock items in the bill of material.
    • In the planning run, the system generates purchase requisitions
    instead of dependent requirements for components that are procured directly. When you configure your R/3 System for MRP, you can define whether direct procurement is triggered by the planning run or by production order management.
    • Product costing processes take valuation data from the BOM item.
    The system determines the release strategy on the basis of the price data you enter. The material group is required to produce a purchase requisition.
    Pavan

  • Item Category N (non-stock item) in BOM creation - Preq Generation

    Hi All
    I have a material component that is planned in APO and not in ECC6. We would like to keep the one BOM for the finished good. Problem is that when we perform the backflush in ECC6, the system wants to backflush the material and causes errors due to missing stock.
    So I assigned the material as a non stock item in the BOM but the system will auto generate  a purchase requisitions for Non stock bom components (item category N) when the process order is created. It is possible to turn off the auto creation of the purchase req for non stock bom components? 
    I have tried the following:
    - Explosion type in item data, created new key with 'Switch off planning' indicator set in system configuration
    - created new 'Z' item category with inventory management de-selected
    Both approaches causes system error: Puchase data of material in not maintained
    I also tried leaving as a stock item with the bulk material indicator selected in the item data. This does not work as the cif will then exclude the component when data is transferred to APO
    Funny enough, the system does not generate a purchase req for non stock bom items when using Repetitive Manufacturing. Any help will be greatly appreciated
    kind regards
    Grant brockelbank

    Hello Vivek
    Thank you for your response
    The item is a non stock item. I do not want this item to be backflushed at all. This can be achieved using the 'N' non stock item category but the problem is that the system will attempt to generate a purchase requisition when the process order is created.
    I do not want the system to generate a purchase req in ECC6 as this item is a planning material that is planned in APO (used for medium to long term planning in a simulation version). We are hoping to use the one Bom for ECC6 and APO planning. The generation of the purchase reqs is a bit of a waste as we will never convert them and there is potential to cause issues for purchasing.
    Any other thoughts?
    Thanks again for your help
    kind regards
    Grant

  • Converting a GL account from Open Item Mgnt to Non-Open Item Mgnt

    Hi All,
    I have a GL account which needs to be switched from being an open item managed account to a non-open item managed account.  The account has already been posted to.  I have therefore posted a document to bring the balance of the account in local currency to zero and have also cleared the account so there are no open items showing (via transaction FBL3N).
    However, when I try to untick the 'open item management' box in the master record (via transaction FS00), I get an error message saying that the balance is zero but open items still exist.  I'm abit confused as the balance of the account is zero and there are no open items that I can see, even though the system is telling me there are!
    Am I missing any steps?  Could someone take me through exactly what I need to do to be able to untick the box and set the GL account correctly.
    I've already searched on the forum and found advice about changing the settings via OBA5, but when i look at that transaction there are no messages with class FH in there.
    Any help would be appreciated.
    Many thanks
    James

    Hello,
    In your case, though balance is ZERO, they are not cleared against each other. It is the reason you are still facing the problem.
    If ther is no open item management check box, then copy program RFSEPA02 to ZRFSEPA02 and append the initialization control.
    If there is already open item management but you want to remove then copy RFSEPA03 to ZRFSEPA03 and append the initialization control.
    Do the following steps:
    1. Block the account for postings (all check boxes) in FS00
    2. Run the customized Z program (Give the company code and account number)
    3. Unblock the account for postings (remove all check boxes) in FS00
    Take help from your ABAPer to stopping the initilization error check.
    Hope this solves your issue.
    Regards,
    Ravi

Maybe you are looking for