Change host of our R3 system

Hi;
When connect from portal to R3 system, the portal open the browser (ITS) with the hostname of the R3 system, not, full name (DNS), and we have error.
How I can change the definition of name of the host to the full name ,for the portal open the connection without problem the ITS of R3?
Thanks a lot

Hi;
thanks for you fast reply.
Cau you send me more information?.
I have the BW and portal in the samme system and samme host. I need change the name of the host in BW-PORTAL for tu connect to R3 system. The definition of R3 host name is "short name" in BW-PORTAL and I need to change to full name.
Thanks

Similar Messages

How to change or rename the logical system name T90CLNT090 IN BI 7

HI Expert's,
i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
because of this i am not able to create the source system between r/3 also.
so how to change this source system name for T90CLNT090.
regards
harikrishna N

Hi,
Pls follow this OSS note : 325525.
Note 325525 - Copying and renaming systems in a BW environment
Summary
Symptom WARNING: THIS NOTE HAS BEEN REPLACED. FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
           Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
           Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
           Reactivate all partner agreements that carry the new logical system name after renaming.
Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
           Solution scenario 2):
If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                    Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                    Reactivate all partner agreements that carry the new logical system name after renaming.
Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
Scenario 3) You want to copy a single BW system of the group by database copy.
Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                     Solution scenario 3)b): See Note 184754.
Scenario 4) You want to copy a single source system of the group by database copy.
Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                     Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
           Solution scenario 4)b): See Note 184322.
Scenario 5) You want to import a client copy in a source system.
           Solution scenario 5): See Note 325470.
Thanks & Regards,
Suchitra.V

Changing SAP Router to different System

HI Experts,
                SAP Router is installed in our Develpoment system can it be possible for us to install this on the solution manager System. Is this advisable to change the SAP router to a different machine. If so How is that possible?
Regards,
Vamshi.

Hi,
Please use the following step.
Installation Steps
1.1     Downloading necessary software components from SAP Service Marketplace:
1.     SAProuter
Use the latest SAProuter version (37.x), which can be downloaded from
SAP Service Marketplace under the following link.
http://service.sap.com/swdc
     Download
     Support Packages and Patches
     Entry by Application Group
     Additional Components
     SAPROUTER
     SAPROUTER 6.40
SAPROUTER 6.40
From the available list of SAProuters, select the SAProuter for your OS platform.
2.     SNC Libraries (SAPcryptolib) download:
http://service.sap.com/swdc
     Download
     SAP Cryptographic Software
Select the SAPcrytoLib libraries compatible with your Operating System.
Note: Please also download the SAPCAR.exe file from the above location to extract the SAProuter archive files.
3.     Create a folder in /usr/sap with the name as: saprouter.
4.     Extract both the files i.e. SAProuter.SAR and Cryptolib.CAR files into saprouter folder using the command:
SAPCAR -xvf SAProuterxxx.SAR
SAPCAR -xvf CRYPTOLIBxxx.CAR
1.2     Creating the certificate request
1.     As user <snc>adm set the environment variables:
SECUDIR = /usr/sap/saprouter
SNC_LIB = /usr/sap/saprouter/libsapcrypto.so
2.     Go to the Trust Center Service - Download Area and get the "Distinguished Name" for your SAProuter from the list of SAProuters registered for your installation.
3.     Generate the certificate Request with the command:
./sapgenpse get_pse -v -r certreq -p local.pse "<Your Distinguished Name>"
P.S: We can also get the distinguished name from SAP itself when we register for the remote service connection.
4.     Display the output file "certreq" using the command:
cat certreq
and with copy & paste insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name.
1.3     Importing the certificate request
1.     With this in turn you can install the certificate in your saprouter by calling
./sapgenpse import_own_cert -c srcert -p local.pse
1.4     Setting secured login to SAProuter
1.     Now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user>, the credentials are created for the logged in user account)
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
2.     This will create a file called cred_v2 in the same directory.
3.     Check if the certificate has been imported correctly
./sapgenpse get_my_name -v -n Issuer
4.     If this is not the case, delete the files cred_v2, local.pse and start over at Item 3 of 4.2 . If the output still does not match please open a customer message in component XX-SER-NET-OSS stating the actions you have taken so far and the output of the commands 3 of 4.2, 4.3, and 4.4.
1.5     Additional actions necessary before you can start saprouter
1.     Logon to the system as <sid>adm, here sa1adm.
2.     The environment variables SECUDIR, SNC_LIB and USER needs to be set for the user account SAProuter is running under using the commands:
setenv SECUDIR <path_to_libsecude>
i.e. setenv SECUDIR /usr/sap/saprouter
setenv SNC_LIB <path_to_libsecude>/<name_of_sapcrypto_library>
i.e. setenv SNC_LIB /usr/sap/saprouter/libsapcrypto.so
setenv USER sa1adm
3.     Check if the environment of the user running saprouter contains the environment variable SECUDIR, SNC_LIB and USER using : printenv
4.     Start the saprouter with the following command line:
#./saprouter -r -S <port> -K "p:<Your Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
Eg. ./saprouter -r -S 3299 -K "p:CN=nradev, OU=0000759188, OU=SAProuter, O=SAP, C=DE"
./saprouter -r -V 2 -K "p:CN=nradev, OU=0000759188, OU=SAProuter, O=SAP, C=DE"
./saprouter -r -R /usr/sap/saprouter/saprouttab -G log.txt -V 2 -K "p:CN=nradev, OU=0000759188, OU=SAProuter, O=SAP, C=DE"
5.     The corresponding file ./saprouttab should contain at least the following entries
inbound connections MUST use SNC
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your_server1> <port_number>
repeat this for the servers and port_numbers you will need to allow,
please make sure that all explicit ports are inserted in front of a
generic entry '*' for port_number
outbound connections to <sapservX> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <sapservX> <sapservX_inbound_port>
permission entries to check if connection is allowed at all
P <IP address of a local host> <IP address of sapserv2>
all other connections will be denied
D * * *
6.     Example: For a SNC encrypted connection to the SAPRouter on sapserv2 (194.39.131.34), the saprouttab should contain the following entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> <R/3-Instance>
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P <IP-addess of a local PC> 194.39.131.34 3299
deny all other connections
D * * *
Thanks,
Harshal

XServe Mail Server not receiving emails from our phone system

Hi everyone,
Since late last year, staff haven't been receiving email notificiations to their work email (hosted by a 10.5.8 Xserve) of voice mail received by our 3COM NBX Phone System. However, if they provide any other email account, such as a Gmail account, they receive the email fine.
Our firewall providers have confirmed that there is nothing stopping the emails going in and out on their end. I've checked the server mail logs and can't find anything of value.
According to a forum thread, this is how our mail system sends an off-site notification via email:
1 - NCP performs an MX record lookup using DNS server IP information to return a valid TCP/IP address for each message being sent
2 - NCP acts as an MTA (Message Transfer Agent) - will directly contact each destination mail server for local delivery
3 - NCP establishes a TCP socket to the resolved TCP/IP address on SMTP port 25
4 - NCP must be able to open a TCP session to the resolved IP address of each destination email server
5 - Each destination server the NBX is sending email to may be configured for a rule base and based on certain criteria my reject an email or attachment that other email servers accept.
I'd appreciate any help you can provide.
Thankyou,
Rhys

I have no way of issuing that command from the "netSet".
Below is the link I found of the self service article on troubleshooting offsite notifications:
http://knowledge.3com.com/service/main.jsp;jsessionid=5CC7B2440667382AC7190A9665 9AC61D.selfservice1?t=solutionTab&ft=searchTab&ps=solutionPanels&locale=enUS&_dyncharset=UTF-8&curResURL=%2Fservice%2Fmain.jsp%3Bjsessionid%3D5CC7B2440667 382AC7190A96659AC61D.selfservice1%3FSearchButton%3DFind%26_dyncharset%3DUTF-8%26 locale%3DenUS%26t%3DsearchTab%26useFocusTopic%3Dtrue%26focusTopic%3D9029739%26searchstring% 3DNBX%252520-%252520Is%252520NAT%252520Supported%253f%26sfield%3D%26dosearch%3Dt rue%26pn%3D4&solutionId=1802&isSrch=Yes
I've tested the internal settings, the dig as we've established, and I've checked the server logs - they don't seem to show anything relating to the nbx.
The firewall has port 25 open to our mail server and phone system only.
-Rhys

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change host name or host ip in AIA after installation

Hi,
we have AIA11.1.1.5.0 and O2C PIP installed.
we need to change host name used in AIA to some different value.
Could you please suggest what all steps are required for this.
Thanks & Regards,
Bob

1) Make a full backup of your XI 3.1 system (both database and file repository)
2) Change the hostname
3) Create a new SIA with all defaults servers using the CCM. Make sure that you instruct the CMS to use the same database connection as before. I ould advise you to change the default CMS and SIA ports.
4) Run the "Update objects" command in the CCM on the new SIA
5) Stop the old SIA and change the ports for the new SIA and the CMS to the default values (if required)
6) Remove the old SIA in the CCM
7) Go into to the CMC and try to delete any remaining servers from the old SIA.
Please note that after completing the above workflow you have to reconfigure some of the servers' settings again in the CMC
Regards,
Stratos

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Is there a way to find all config changes between clients and sap system

We have our Dev system with clients
310 - Developer make changes and create transport
400 - Test client
410 - a copy of our Production system (over 1 year ago0
TST - this is our quality system with one client
101
Production system one client
101
I know if i do a database copy from Production to our TST system, both systems would be exact.
Abaper Director wants to know all the configuration changes that are different between Devopment client 310 - Test and production.
I told him that in development client 310 the abaper or functional users make most of the changes if they do not get transported they would be missing.
I cannot copy to client 310 otherwise we would loose all of our version management.
Is there another way that I can see the config changes between all these clients.
Thanks
Joe

You should be able to use tcode SCU0
Regards,
Brian

Changing HOST Name in Oracle 10G AS

Hi,
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM
Machine is UTI ...Every Thing is Working Fine ..... After the Successful Installation of 10G AS Suddenly i got requirement to the Change host (UTI to UTTI)
so i have changed the host Name to UTTI after that Oracle 10G AS is not Working , i know that every thing is registered with host name as UTI
is it any possible Solution to make it Working Fine
Any Advice on this .
Thanks for Your Valuable Information
SHAN

user609980 wrote:
I am using "Oracle 10g Application Server". I have installed oracle 10G AS in Windows 2003 Server(32-bit) ,2G RAM Good question. One that is appropriate for the App Server forums, not the Database forums.
And answered in the docs.
Which docs? Well, that depends on the VERSION of the app server. Not the BRAND as you specified. (Assuming 10g R2, 10.1.2.x, you would look under App Server 10g R2 docs at http://tahiti.oracle.com, click on the System Management tab, and look at Chapter 8 of the "Oracle Application Server >> Administrator's Guide"

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

Change in technical and business system.

hi,
in production we are replacing SRM system with NEW SRM system.the only difference is the host name.if create a new technical system with new host name and business system based on this techical system,will the scenario work perfectly.
all other details are same in both.
the business system name is same as previous and in scenario of integration directory.
will the change in HOST NAME effect the scenario.
plz let me know and the abap tables in which the details of this T SYS and B SYS are stored in .
thanks and regards
vijender

Hi,
The Following things needs to be take care
1) Make sure that your Logical System name is same as Old one in the Newly created TS
2) Make sure that Your BS name is same as Old Name
After this do SLD data Update through ID-Environment-SLD cache update
Now trigger the Scenario
REgards
Seshagiri

I have a Mac os x 10.6 Snow Leopard. When on Face Timeto my brother in Canada I can hear him but he can't hear me. We've both checked our Audio systems which seem to be in order. Please could someone help? Thanks.

I have a Mac OS X 10.6 Snow Leopard. When on Face Time to my brother in Canada I could hear him but he wasn't able to hear me. We've both checked our Audio systems which seem to be in order. Please could someone help? Thanks.

Hi Shirley,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Change ALV variant different between systems

Hello,
I have a program that creates an ALV grid. In our QAS system, I have access to select, change, save & manage layouts. The exact same program in PRD only allows change layout. Is there an authorization object that controls how ALV grids can be controlled?
Thanks in advance.
Maggie

I have two things in the program:
CALL METHOD grid1->set_table_for_first_display
         EXPORTING i_structure_name = 'ZVIOLATIONREPORT'
                    i_buffer_active = 'X'
                          is_layout = gs_layout
                         is_variant = gs_variant
                             i_save = 'A'
             IT_TOOLBAR_EXCLUDING = functions
         CHANGING it_outtab        = i_vbak_outtab
                    it_fieldcatalog = it_fieldcatalog.
AND
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        it_fieldcat = i_fieldcat
        is_variant = i_variant
        i_save      = 'U'
      TABLES
        t_outtab    = i_order.
Neither is a variable so why would the program react differently between the two systems?
Thanks.
Maggie

Change host of our R3 system

Similar Messages

Maybe you are looking for