Change in posting date in fpcpl

in FPCPL when we clarify any item then the posting date of the document posted after clarification is the same as the original posting of item in the clarification list but we have requirement to post the document using the current system date while clarifying in FPCPL
for example item posted on clarification list on 10th july and when i clarify this on 15th july still the posting date of item wil be 10th july only where as we want this to be 15th july
so could you please guide me how to acheive the same?

Hi Vinod,
There is a "Other Posting Date" button in the "Item Clarify:Details and selction Screen"  under the payment clarification worklist, just beside the  "Ptl Calrif." button.
On clicking the "Other Posting Date" button, you can change the posting date to any date you like, provided the posting period is open for the date that you are proposing.
However, if you requirement  is only to change the posting date within the current month, then it will not have issues with respect to the posting period.
Once done, you can post the amount  to the respective account from payment CWL and you will see the posting date of the payment document in the account is same as what you have proposed. 
Hope it helps...
Thanks,
Amlan

Similar Messages

  • How to change the posting date in UD stock posting for a HU managed item?

    Hi,
    We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
    I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
    Thanks & Regards,
    Madhavan Krishnamoorthy.

    I don't think you can.
    Craig

  • Unable to change stock posting date at usage decision while inspecting HUs

    If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
    So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
    Anyone?
    Seba
    Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AM

    I solved it in this topic: Changing posting date at usage decision for handle units. How?

  • Unable to create a billing document , have to change the posting date

    Dear All,
                      I have performed the following steps:
                     1. I have created Customer
                     2. Created a material.
                     3. Linked the customer to the material
                     4. Post initial stock for the material.
                     5. Create a Sales/Order.
                     6. Displayed the sales order and recorded the scheduled delivery date.
                     7. Created the delivery for the sales order.
                     8. Transfer the stock from the warehouse management
                     9. And update the order.
    While updating the order I selected post goods issue and it would not go ahead because the posting date is not there in the posting period. Where do I change the posting date. I could not find it anywhere. I did not enter the date anywhere.
    Thank you,
    Sandhya

    Hello Sandhya
    Here is how MMPV works.
    Lets say I am at the end of the May month 05.31.2009 so lets say period corrresponding to this is 05/2009.
    Now if you want to post data in June perios 06/2009 should be opened.
    Here is what I will do in MMPV
    Enter my company code
    Instead of using periods I will use date which will be 06/01/2009 (mm/dd/yy format in my example)
    Check radio button check and close period
    Click on remaining checkboxes.
    Execute
    The effect of this will be that the previous periods will be closed and June will be opened.
    In your case since no one has opened periods after 2006 so may be you will have to repeat this step for each month until you reach current period if that is the one in which you want to post goods issue.
    Thanks
    Vikas

  • Mass change of posting date/fiscal year in LIV parked invoices

    Hi,
    We have OSS note 99775 (program ZFSAP2_B) for mass changing posting date and fiscal year for FI parked documents but I can not use this to change posting date for LIV parked invoices.
    Did anyone have any idea how to mass change the posting date of LIV invoices? any NOTE or PROGRAM?
    I tried to create a BDC using FBV4, which in turn calls MIR4, but system is over writing  initial line item amount and qty from PO. 
    I can read initial invoice line item values and over write again but I dont think this is how I should do.
    Please advice.
    Thank you all and best Regards
    Vijay Goli

    Hi
    Thank you very much for your input.I modified the program ZFSAP2_B given by sap and it worked fine for LIV invoices also.
    When I used this program  in 2007 for FV60 documents the document key was changed without raising the event FIPP.CHANGED. But this year when we changed the posting date the system triggered the CHANGED event and as a result of this event the workflow came to the starting point. We did not make any chages to workflow template during 2007. Any idea what could have casued this event to trigger?
    Thanks
    Vijay

  • Reg Change of posting Date at the time of Incoming Excise Invoice

    Hi All ,
    Hope all r doing gr8 !!
    I have one question relevant to Posting Date of IEI.
    If i am doing IEI based on GRPO the system picks up the posting date from GRPO , so is there any way to change that Posting Date to current date without disturbing the Posting Period (Here Period is locked for that month- i.e.  previous month).
    Looking for your valuable inputs.
    Regards,
    Kashinath

    Hi!
    Its not possible. You have to Book IEI on GRPO Date only. You Make your Posting Period to Closing Period and Give Autho to Users who use those period.

  • How to change the posting date at the line item level in a sales order

    how to change the posting date at the line item level in a sales order

    Hi,
    I believe the POSTING DATE will appear on the accounting document
    In the Accounting document, the posting date will be based on the  Billing date.
    Please let me know if you need any more details
    santosh

  • In MIGO , How to restrict the user to change the posting date?

    Hi All,
    In MIGO , I want the user to restrict from change in posting date i.e. user should not be able to change the posting date. The system should take to-day date only as a posting date.
    Thanks in advance.
    GP

    Hi,
              check this MBCF0005.
    EXIT_SAPM07DR_001.
    BADI being <b>MB_MIGO_BADI.</b>
    <b>Reward points</b>
    Regads

  • BAPI to change the posting data of invoice document

    Hello All,
          I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
    Thanks,
    Siva.

    BAPI_INCOMINGINVOICE_CHANGE

  • Can I change the posting date in CO13 to cancel a confirmation?

    Hi all
    I'd like to know how can I change the posting date using CO13.
    So I have a confirmation in date 30/6 for exemple, but I'd like to cancel it in posting date 1/7, but the systems takes the date of the original confirmation. Can I change it any way?
    Thanks in advance
    Points will be given

    Dear Roger,
    this is only possible in case if the bookin periode is closed. In this case it's allowed to change the booking date in CO13 and the date field gets automatically inputable, normaly it's greyed out.
    As long as the booking periode is open, the system automatically use the date from confirmation.
    Hope this help.
    Regards,
    Sabine

  • Tax Code removed on changing the posting Date in Purchase Order

    Dear All,
    This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
    Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date]  [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
    The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
    In this situation what can be done as the same case will again happen for the next month.
    Pls. provide the solution / work around for this problem.
    Regards,
    Yogesh Jadav

    hi yogesh,
    Cancel/Close the created purchase order.
    First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
    (Administration->sytem intialization-> general settings--> posting period tab)
    Create a new purchase order.
    Send it for approval,authorizer can change date as required,
    once the posting date changes,tax code get refreshed,authorizer
    need to select tax code once again.
    <b>Tax code normally get refreshed when you change posting date it's normal
    system behaviour.</b>
    After authorizer does above changes,he can approve purchase order.
    Once purchase order is approved,orginator can add it as purchase order in draft stauts.
    <b>After approval we can not do any changes in purchase order.</b>
    Hope my solution will solve the problem.
    Thanks,
    With regards,
    A.Jeyakanthan

  • How to change a posting date of an invoice in background

    Hello,
    I want to change the posting and invoice dates ( to correct many invoices,)
    I use the MIR4 transaction, the batchinput works fine in foreground,
    but in background I have the error
    Control framework : erreur fatale, destination SAPGUI
    due to enjoy transaction.
    No OSS notes or BAPI's to solve it.
    I am on ECC5 (MySap ERP2004)
    any idea ?
    Best regards
    RF

    New transactions based on control framework are not suitable for batch input. Try to find a BAPI or function module to do the same.

  • Change in posting date, due date & Doc Date at row level of Journal Entry.

    Hi All,
    I am using SAP B1 2007B with patch level 09, when i run report yesterday for JE i found there were 230 records where there is a change in Docdate, duedate & posting date to 01/01/00 at row level of journal entry but at header level it's showing properly. what colud be the reason ? 
    and i would to know significance of  Valid from field at row level of journal entry.
    in some cases it is coming default as 01/01/00
    please give me solution ASAP
    Regards,
    Kashinath

    Dear Ms/Mr Sutar,
    I have found note n. 1277202. Can you check if the scenario you described is the one in the note.
    Please, let us know.
    Regards,
    Marcella Riv
    SAP Business One Forums Team

  • Change of posting date in manual bank reconciliation

    Dear all
    We have some postings for manual bank reconciliaitons which cannot be posted from FEBAN as the period is now closed. Can you please guide me on how to go about this. Can the posting date / period be changed? Do we need to delete and reenter them. Please any help.
    Many thanks
    PRG

    Hi,
    Try to post via FEBA_BANK_STATEMENT
    Here for the not posted lines, you change process in goregorund and can change the date.
    In case no line has been poste for this bank statement, then you can delete the same via program RFEBKA96 in SE38. Then you can reupload the same.
    Regards,
    Gaurav

  • How to change the posting date of confirmations?

    Hi,
    In my company CATA is scheduled as a background job and uses some ABAP logic to set the correct posting date for the confirmations that are transferred to the PS module. As a result of a wrong date entry in the table which is used in the ABAP logic, all the confirmations (8572) that should have had posting date in February got posting dates in March.
    As far as I can see some of the options are:
    - Use CN48N and cancel one and one confirmation
    - Manually add 8572 confirmations with the correct amount of time, employee number, periode, posting date etc.
    Due to the amount of confirmations this procedure will be very time consuming.
    My questions is what is the best procedure to correct the posting date for 8572 confirmations with wrong posting date?
    Regards,
    Petter Kvalvik

    hi
    write a LSMW or BDC to cancel the confirmation and correct it by another LSMW or BDC program for correct date.

Maybe you are looking for