Change in Status Profile for tcode cj01 or cj02

Hi guys,
I want substitution for Status Profile value depend on WBS level, screen field is JOSTD-STSMA. The substitution doesn't have this field list in the opsn transection. Is there any other way like user exit or badi.
Thanks in advance.
Regards,
Shankar Gomare

Hi Shankar,
I guess you can do this from SPRO.
project systems>>Structures>>Operative Structures>>Work breakdown Structures
Check if you can do this in WBS User status and Create project profile.
Regards,
Gautham Paspala

Similar Messages

  • Changing Status Profile for WBS Element

    Hi Freinds,
      How can we change the Status Profile for the WBS Elements.
    say for Eg : need to chage status Profile Z0000005 to Z0000008
    where they reflect in DB Table JSTO for OBJNR in filed STSMA
    Please suggest me the function modules or BAPIs
    Thanks in Advance,
    Ganesh

    hi,
    try the below given link
    [Changing Status Profile for WBS Element|Update WBS element;
    hope this helps
    Regards
    RItesh J

  • Change status profile for existing incidents

    Hi experts
    We were using status profile SLFN0001 with service desk and it was working fine, but we had to create a new status profile ZLFN0001 because of new requirements and everything works fine for the new incidents. The problem is that the old incidents still have the status profile SLFN0001, is there a way to change those "old" incidents and assign the status profile ZLFN0001 instead of SLFN0001?
    Any help would be appreciate it

    Hi Osbaldo,
    As far as I know, you will not be able to change the status profile with already implemented all incidents.
    Regards,
    Sneha

  • User exit in VA01 for changing the status profile

    Hi Experts,
    I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
    Thanks in Advance:-
    Santosh

    Hi, Santhosh,
    You can use function module "STATUS_PROFILE_CHANGE"
    see the code,
    CALL FUNCTION 'STATUS_PROFILE_CHANGE'
      EXPORTING
        OBJNR                          =  XVBAK-OBJNR
        STSMA                          =  G_STATUS
      NO_CHECK                       =
    EXCEPTIONS
       OBJECT_NOT_FOUND               = 1
       NO_STSMA_CHANGE_POSSIBLE       = 2
       STSMA_NOT_FOUND                = 3
       OTHERS                         = 4
    where G_STATUS is your new status profile. It will update in your screen also.
    Hope this will help u.

  • Screen "Define Status Profile for User Status" should not open in changemod

    Dear all ,
    After following the path CRM>SPRO>SAP IMG -->Customer Relationship Management -->Transactions -->Basic Settings --> Status Management -->Define Status Profile for User Status.
    the screen opens in change mode & allows user to carry out the changes, this is very crucial screen & hnece should not be in open mode ,kindly advice on closing the same.so that it opens only in display mode for production system.
    Regards

    Hi Milind,
                 To Block changes to any Object their is a Provision for the same in Client Deatils Screen
    Go to TCode:SCC4
    Check the Tab Cross-Client Object Changes
    Try setting the Option (3.No Changes To Cross-Client Customization Objs)
    Following Options Symbolises:
    Changes to the Repository and cross-client Customizing permitted
    There are no restrictions on the maintenance of cross-client objects for the client when this setting is used. Both cross-client Customizing objects and objects of the SAP Repository can be maintained.
    No change to cross-client Customizing objects
    Cross-client Customizing objects cannot be maintained in the client with this setting.
    No change to Repository objects
    With this setting, objects of the SAP Repository cannot be maintained in the client.
    No change to Repository and cross-client Customizing objects
    Combination of both restrictions: Neither cross-client Customizing objects nor objects of the SAP Repository can be maintained in the client.
    (Choose This One it Should Resolve your Problem)
    Hope it answered Your Queries..
    Thanks and Regards,
    RK.

  • To change user status profile on sales order at run time.

    Hi Experts,
    We have defined status profile for Sales returns ( Doc type RE) which blocks the  return order on creation. There are two statuses here which are to remove the delivery block and to remove the billing block by authorised users.
    The requirement is now to have a three level block ( three statuses ) on the same document. We can create a new status profile and assign it to a new return sales order tpye  but we want to avoid creating new document types. Since this document type is used across various companies in the group we can not assign a new profile on the existing RE document as well.
    My question to all experts is
    Is it possible to dynamically change the status profile assigned to the document type based on characterstics like sales org or company code etc? If any body has done this please let me know the user exit , function module, BADI etc where the necessary coding has been done.
    Helpful answers will be rewarded with points.
    I look forward to your co operation.
    Regards,
    Kartik Shah

    Hi Liam,
    In the Program MV45AFZZ in the FORM userexit_save_document
    you use the following fn module to change the user status
    'STATUS_CHANGE_EXTERN'
    Example
    IF t180-trtyp = 'H'.  "Only creation time
      READ TABLE xvbap WITH KEY matnr = c_matnr.
      IF sy-subrc = 0.  "If above material exist then change status
        LOOP AT xvbap WHERE cuobj NE space
                       AND  matnr =  c_matnr.
          l_objnr = xvbap-objnr.
          CALL FUNCTION 'STATUS_CHANGE_EXTERN'
            EXPORTING
              objnr               = l_objnr
              user_status         = 'E0013'  "Send ej IDOC
              set_chgkz           = 'X'
            EXCEPTIONS
              object_not_found    = 1
              status_inconsistent = 2
              status_not_allowed  = 3
              OTHERS              = 4.
        ENDLOOP.
      ENDIF.
      sy-subrc = 0.  "Restore the previous condition
    ENDIF.
    Reward if helpful *********

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • How to change a status profile from existing in CRM 7.0?

    Hi,
    This is the scenario for which I need to change the existing status profile :
    We are using categories such as Maintenance , Approvals etc.
    There is a huge list of options which comes when we choose the category. We have assigned a status profile to each of these categories.
    So for e,g when I choose Maintenance, it also displays other options not related to Maintenance.
    Q 1) how to I change the status profile on this??
    I tried using CRM_STATUS_PROFILE_CHANGE but it doesnot work
         CALL FUNCTION 'CRM_STATUS_PROFILE_CHANGE'
      EXPORTING
        OBJNR                          = iv_guid
        STSMA                          = 'ZV001'
      XNOAUTO                        =
      X_NOACTIVITY                   = ' '
    EXCEPTIONS
       OBJECT_NOT_FOUND               = 1
       NO_STSMA_CHANGE_POSSIBLE       = 2
       STSMA_NOT_FOUND                = 3
       ERROR_OCCURRED                 = 4
       OTHERS                         = 5
    Q 2) If the above is not the right way is there a possibilty to hide the statuses ??
    Thanks and Regards,
    Narayani

    Hi,
    I am not so clear about your requirement, would you please try to make it clearer.
    Which transactions are you assigning the status profile to?
    And what is the "categories" do you mean? As I could guess it is the item within the status profile, isn't it?
    For example you have a status profile defined as
    10 xx01
    20 xx02
    30 Maintenance
    40 xx03
    50 Approvals
    60 xx04
    Is it like the above? Or else, please clarify.
    Thanks,
    Hongyan

  • Change the status profile assigned to the line item from PROFA TO PROFB

    Hi Experts,
    The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
    Item Category A -> Status Profile PROFA
    Item Category B -> Status Profile PROFB
    For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B.  However the status profile still remains PROFA.
    We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
    any quick inputs from any one please......
    Thanks in advance
    hemanth

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Change in status profile of internal order

    I've changed the status profile assigned to an order type because of new requirements for disallowed transactions.  The new profile settings/ user status worked for new IO master data created.  However, for existing IO master data, the user status was not updated with the new status profile.  What's the transaction to reconstruct/correct the user status of old IO master data?

    Hi,
    Once you assign the sttus profile for an order type,this should work for all the orders assigned to that specific ord-type.
    create a new session and work.The orders will respond to the new status profile.
    Hope this helps.
    Regards,
    Ramesh

  • How to change the status profile of equipment?

    Hi Experts,
    Is it possible to change the user status profile for already created equipment? I tried to change the assignment of status profile to equipment category and found it works only for new equipments. It is not applicable to already created equipments. The status of the status profile is already used in equipments.
    Please suggest and do the neeful.
    Thanks and best regards,
    Praveen.

    No you can not change status profile assigned with already created equipment.
    Eg. You assigned status profile 00000003 to equipment category M of equipment. so whnever any new equipment created will get status profile 00000003 only.
    For your case, dont make any change status profile no .00000003--> make whatever changes you have to made about status naming,sequence keeping same status profile.
    After that goto equipment change master edit>change category>selet same category for assignment. so equipment will get same status profile with status changed.
    Hope this will help you.

  • Status Profile for Internal Order

    Hi,
    Please tell me during creation of new status profile for new internal order type under status I have mentioned LKD - Locked and PLIM - Write plan line item. What should be used its corresponding Business Transactions with No Influence, Allowed, Warning, Forbidden, No Action which i need your valuable suggestion for our new implementation project.
    Best Regards,
    Samrat

    Hi Anand,
    My query is while creating Status Profile in tcode OK02, there are various business transactions are available under status which one is No Influence or Allowed or Warning or Forbidd etc. I need to know the actual business transactions required for the status profile. Presently I have mentioned two business transactions which are Release and Write plan line item under status LKD(Locked). Release indicator is "Not Influence" and "Set". And Write Plan Line Items checked only "Allowed" as business transactions. But another user status "PLIM" I am not able to incorporte business transactons. While click on new entries A to W business transactions are appearing which are all "No Influence". But after saving the screen and back from the screen records(Business transactons) are not being saved properly.
    I want to know the actual reason... Kindly need your suggestion...
    Best Regards,
    Samrat Roy

  • Status profile for the selection screen ?

    Dear Shymal,
    The link of thread which you sent have this line status profile for the selection screen for QA33 and QA32 . I don't users ti get those lots which are having status LTCA.
    Now how can i do this? Can you explain me?
    Regards,
    Kaushal Rai

    Dear Kaushal,
    It is written in that reply status profile, is just a slip of mind/Fingers only. We can say a typographical error. I hearty apologies for the same.
    Now a accept my regret and pls find the rectification herewith.
    That is "Selection Profile", to create rather I can say configure it,
    - Run trx BS42, create new profile, Name it Logically.
    - Double click on the "_Selection Conditions_",system will lead you to the screen named Change View "Selection Conditions": Over View.
    - Here Enter the LTCA, in the Fourth Column "STATUS".
    - Click on the check box under Sixth column 'not'.
    The settings should be as.....
    1st Column,,,Link :- No Links (Blank0
    2nd Column,,,Usr:- Don't check this box.
    3rd Column,,,St.Prof.:- Blank
    4th Column,,,Status:- LTCA.
    5th Column,,,Status:- Lot canceled
    6th Column,,,not:- Check this box.
    7th Column,,,Status:- It will be 'Active' by default.
    Now SAVE.....
    Now in QA32, pick the section profile you just created.
    Let me know if it don't work.
    Regards,
    Shyamal

  • Error in activating status profile for SVT

    Hi,
    I've been trying to activate status profile EHS_SO for SVT in REACH compliance version 2.0 . But I am stuck.
    When I save a sales order, a message-'Error when activating status 0001 for status profile EHS_SO in order XXXXXX' has come up. My IMG settings are as follows:
    Sales documentr: No existing status profile used
    Status profile: EHS_SO added with status SD
    Environment parameter:SVT_SO_PROFILE: EHS_SO
                                          SVT_SO_STATUS: 0001 used
    Activate Status profile: STUCK (can't figure out the object type for VBP object type category)
    Does anyone know?

    Hello Bomi,
    Please see SAP note # 1111196. It talks about Status profile for sales order and status profile for production orders for online check for SVT.
    May be useful to you.
    Regards,
    Niraj

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

Maybe you are looking for