Change legend series text in graph

Gurus,
Is it possible to change the text of the legend series in DVT ? If so how ?
thnks
using Jdev 11.1.1.5

may be you can try this approach.. not sure if this helps
pie graph slice derivation returning two rows

Similar Messages

Customize the legend of a pie graph to show only one series

Is there a way to show only one series in the legend though the pie graph displays more than one series?
Any help is greatly appreciated
Thanks
KK

Here is an example that changes the scale of a graph. I think it is what you are looking for. Post back if it is not.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]
Attachments:
Update_graph_scale.vi ‏40 KB

Changing legend labels

Post Author: Nym
CA Forum: Publishing
Hi !
I get a set of data from a text file and I would like to generate a graph using these data. My set of data is made of lines of agregated counters, one for each month, and the first line contains the labels of the different counters. Those counters' labels are not user friendly and I would like to change them in the legend labels of the graph. How can I do that ?
Regards,
Nym

Post Author: jsanzone
CA Forum: Publishing
Nym,
The only way that I've been able to control the name of a label in regards to graphing is to use the Variable Editor and create a variable off of the column, for instance:
The name of the column from the database is call "Black_Catalog". so I create a variable called "The Black Catalog" and in the formula: =[Black_Catalog]
Then in the graph I replace the field that is called =[Black_Catalog] with my new field. When the legen displays it will show "The Black Catalog".

Help Needed : Changing the Color of Bar Graph Dynamically

Hi..
Is der any body to help me out...?
My Question is :- How to change the color of Bar graph Dynamically..
For example (Assume when one of the Bar Graph crosses certain limit of Y axis value mentioned, the graph must be changed into RED color)
Thanks in Advance
Edited by: user12873839 on Mar 30, 2010 10:03 PM

Manoj,
You have to create the entire chart manually. follow the below steps. You can refer to the anychart website for more help on different tags and features.
1. Enter the following code in the html header of the page
<script src="#WORKSPACE_IMAGES#AnyChart.js" type="text/javascript" > </script>2. Create an ON Demand Application process by going to the Home>Application Builder>Application #>Shared Components>Application Processes
3. Click On Create
4. Enter the name as DYNAMIC_BAR_GRAPH_CHART
5. Select the processing point as On Demand
6. Click on Nxt
7. Enter the following code in the processing text
DECLARE
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
OWA_UTIL.http_header_close;
HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
HTP.p ('<anychart>');
     HTP.p ('<settings>');
          HTP.p ('<animation enabled="True"/>');
     HTP.p ('</settings>');
HTP.p ('<charts>');
   HTP.p ('<chart plot_type="CategorizedVertical">');
     HTP.p ('<data_plot_settings default_series_type="Bar">');
          HTP.p ('<bar_series>');
                    HTP.p ('<tooltip_settings enabled="True">');
                    HTP.p ('<position valign="Top" halign="Right"/>');
                    HTP.p ('<format> Name: {%Name}');
                    HTP.p ( 'Value : ${%YValue}{numDecimals:0}');
                    HTP.p ('</format>');
                    HTP.p ('<font bold="false"/>');
                    HTP.p ('<background>');
                    HTP.p ('<corners type="Rounded" all="3"/>');
                    HTP.p ('<border type="Solid" color="DarkColor(%Color)" thickness="2"/>');
                    HTP.p ('</background>');
               HTP.p ('</tooltip_settings>');
          HTP.p ('</bar_series>');
     HTP.p ('</data_plot_settings>');
     HTP.p ('<data>');
          HTP.p ('<series name="series 1">');
           FOR cThis IN (select table2.name, table2.value
                              from table1,table2,table3
                              where table1.T1ID = table3.T3ID
                              and table2.T3ID = table3.T3ID
                              and table3.C_ID=1
                              and table3.A_ID=1
                    ORDER BY table2.name )
          LOOP
               IF cThis.value > 90 THEN
                    HTP.p ('<point name="' || cThis.name || '" y="'|| cThis.value || '" color="red"/>');
                ELSE
                    HTP.p ('<point name="' || cThis.name || '" y="'|| cThis.value || '" />');
               END IF;
          END LOOP;
          HTP.p ('</series>');
     HTP.p ('</data>');
     HTP.p ('<chart_settings>');
          HTP.p ('<title>');
               HTP.p ('<text>Chart Title</text>');
          HTP.p ('</title>');
          HTP.p ('<axes>');
               HTP.p ('<y_axis>');
                    HTP.p ('<title>');
                         HTP.p ('<text>Value</text> ');
                    HTP.p ('</title>');
                    HTP.p ('<labels>');
                         HTP.p ('<format>${%Value}{numDecimals:0}</format>');
                    HTP.p ('</labels>');
               HTP.p ('<axis_markers>');
               HTP.p ('</axis_markers>');
               HTP.p ('</y_axis>');
               HTP.p ('<x_axis position="Normal" align="inside">');
               HTP.p ('<labels display_mode="Rotated" rotation="90" align="inside" />');
               HTP.p ('<title>');
                    HTP.p ('<text>Name</text> ');
               HTP.p ('</title>');
               HTP.p ('</x_axis>');
          HTP.p (' </axes>');
     HTP.p ('</chart_settings>');
    HTP.p ('</chart>');
HTP.p ('</charts>');
HTP.p ('</anychart>');
htmldb_application.g_unrecoverable_error := true;
END;8. Click on Create Process
Now we will create a html region to display the graph.
9. Create a new region of type HTML on the same page and select the region template as no template.
10. Enter the following code in the region source
<div id="DynamicaBarGraph"></div>
<script type="text/javascript" language="javascript">
function DynamicaBarGraph()
var DynamicaBarGraph = new AnyChart('/i/flashchart/swf/AnyChart.swf');
//    DynamicaBarGraph.width = "400";
//    DynamicaBarGraph.height = "400";
DynamicaBarGraph.addEventListener('pointClick', onDynamicaBarGraphClick);
    var DynamicaBarGraphData = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=DYNAMIC_BAR_GRAPH_CHART',0);
    gReturn = DynamicaBarGraphData.get();
    DynamicaBarGraph.setData(gReturn);
    DynamicaBarGraph.write("DynamicaBarGraph");
function onDynamicaBarGraphClick(e)
// Read point name
     name=e.data.Name;
// Read point value
     value=e.data.YValue;
// You can add onclick even here using the values name and value
DynamicaBarGraph();
</script> Hope it helps. Thanks.
Regards,
Manish

Changing quiz button text

I am working on a series of tutorials and quizzes for our
client, I want to change the text on the "Next" button on the
quizzes. It appears easy enough, in the options, Next button text
field, I have entered what I want, but it still appears as "Next"
when I publish it. Am I an idiot?
Please help.

This may be a stupid question, but did you save the file
before you published? I have sometimes had instances of not saving
and publishing first and my changes are not reflected.
Also, if the buttons were already on the screen with the text
"Next" when you decided to change the button text, you'll need to
delete those buttons and then add them again. The text does not
update dynamically.
Worst comes to worst, you can manually change the button text
with a double-click or through properties...
Hope that helps.

DAX formula and Legend/Series variable on line chart

What I am trying to do is to find a DAX function that will not cumulate the 'startyear' variable (2006-2012) that is in the Legend/Series in a pivot table for a line chart I have (see below image of chart). The below functions just cause the startyear values
to cumulate all together (2006+2007+2008....) instead of treating the years as separate values:
=(CALCULATE(countrows(s1Perm1),FILTER(ALLSELECTED(s1Perm1),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
Does anyone know how to change the above DAX formula or have another one that will allow the values in the Legend/Series variable to cumulate individually?

Yes, it is a count, but they also must meet the criteria in the slicers chosen by the user.
Regardless, I tried your suggestion and unfortunately, it did not work--in that the year values in the Legend/series are still aggregating together, rather than individually--ie. the numerator below for 2007 and 2007 are combined:
StartYear
Values
2006
2007
ExitMonthCategory
Den
Num
CumPercent
Den
Num
CumPercent
0.5
243
30
12.3 %
168
30
17.9 %
1
243
37
15.2 %
168
37
22.0 %
2
243
53
21.8 %
168
53
31.5 %
3
243
63
25.9 %
168
63
37.5 %
4
243
75
30.9 %
168
75
44.6 %
5
243
92
37.9 %
168
92
54.8 %
6
243
104
42.8 %
168
104
61.9 %
12
243
175
72.0 %
168
175
104.2 %
18
243
218
89.7 %
168
218
129.8 %
24
243
262
107.8 %
168
262
156.0 %
30
243
289
118.9 %
168
289
172.0 %
36
243
302
124.3 %
168
302
179.8 %
42
243
306
125.9 %
48
243
309
127.2 %
168
309
183.9 %
54
243
318
130.9 %
168
318
189.3 %
60
243
320
131.7 %
66
243
321
132.1 %
72
168
324
192.9 %

Impossible to generate legends of text automatically.

I have a big probleme : it's impossible to generate legends
of text automatically with Captivate 1 and 2. The captures animated
do not function either.
Thank you for your help
EmG

Can you check a couple of things?
1. mentioned that the specific recipient wants plain text in Tools | Address book... 'prefers to receive mesages formatted as 'Plain Text' and click on OK to save changes.
Is there a conflict..Have you checked that there is only one entry for that person. They are not somewhere else in another address book like Collected Addresses etc.
re: 'Yet, the outgoing message is visualised as HTML both in my Thunderbird outbox and in the receiving inbox on a webmail system'
2. Edit | Preferences | Composition | Send Options
* Under 'Text Format' section. Have you selected to send emails as:
* ''''Send the message in both Plain text and HTML''''
* Then click on OK to save send options.
* then click on ok to save Options.
3. Edit | Account Settings | <account name > | Composition & addressing
If you uncheck 'compose messages in HTML' and then click on OK to save changes, this will only allow you to compose messages in Plain Text.
If you have this selected so that you can compose in html and also have set the option (see 2 above) to send the email as both HTML and Plain Text AND set the address book contact to prefer to receive Plain Text, then they should get Plain Text.
You can select to 'compose messages in HTML' in the Account Settings as stated above, but you can swap to Plain Text for a specific email by holding down 'Shift' key and clicking on 'Write' button.
Providing the settings (see 2 above) are set to actually ''send'' in both html and Plain text, you could send this to yourself and receive a plain text message no matter what the settings under 'View' > 'Message body As'.

How to change the default text title of Detached table/treetable

Hi,
Is anybody know How to change the default text title of Detached table/treetable.
I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
as per this post It will change the title throughout the application.
I wanted to change only for one particular table.
Thanks,
Charu
Edited by: Charu on Sep 13, 2012 4:14 AM

Hi,
please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
Frank

Find Change through external text file

Hello folks
I am bit pretty in InDesign scripting so could you please look into this.
How can i change any particular text field in Indesign CS3 document from text file.
I do have find change script but for each InDesign document specific text file is assigned.
So each time i have to modify find change GREP property that is also repetetive of work. Is there any way to get find change information should be extract from external text file.
Many Tanks in advance

In the FindChangeByList script, you could customize the function myFindFile(myFilePath) {...} as to search the FindChangeList text file in the document location rather than the script location. That's an example. The question is: given a document, where will you have the corresponding FindChangeList?
@+
Marc

Smartview 11.1.2.5- Cannot change value in Text-List Dropdowns- Excel Crashes

Using latest/greatest Smartview with 64-bit Office and Windows 7. I have a native essbase app utilizing text-lists. I am trying to update text-value through smartview. Smartview automatically produces a drop down to select a value from the linked text-list. However- as soon as a different value is entered or selcted in this cell with the drop-down list- Excel crashs. I have reproduced this consistently everytime. I have no way to change values for text-measure accounts linked to text-lists. I feel this is and incompatabiliyt issue with office 64-bit.

SmartView using the forms. It appears this issue has been logged as issue number 6566082 as seen here: http://docs.oracle.com/cd/E17236_01/epm.1112/readme/sv_1112200_readme.html
But I can't seem to find out where I can get information on the status of this issue and whether it's been patched in future versions.

Changing the Size of generated graph in excel report generation toolkit

Hi, i am trying to build a report generation vi for my Structural health monitoring system in which i need to export 3 graphs in to an excel report. The idea is to have the report on a single page, but when i paste them along with the ceiling and pillar deviation percentages, the report just exceeds the page limit. I wanted to know whether one can change the size of the graphs in excel? One can do it in word(tried that), but i dont want to use the bookmark option as it intend to put this up as a webservice in the next step. I am using LabVIEW 2009 Thanks.
LabVIEW 8.2,8.6,2009...still learning
Attachments:
Report Generation SHM.vi ‏30 KB

Hi,
I haven't tried this myself, but looking through the report generation toolkit the "Excel format image VI" (in the Excel specific tab of the Report Genertaion window) looks to be the one you are after. The help entry for the VI says to: "Use this VI to format any type of image in a worksheet, including front panel images, images from a file, and graphs"
Hopefully this will help.
-CC
"If anyone needs me, I'll be in the Angry Dome!"

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

How to change the default text "There are no items to show in this view" in the visual webpart

Hi,
I am using a visual webpart and in that if there are no items in the list it is showing the default text "There are no items to show in this view." I want to change this default text.
I checked the forums here there are multiple ways are shown but no one is working for me.
Kindly help me to change this text.
Thanks in advanced.

It seems you're retrieving items inside a specific you.. why not having a <div> inside you're visual web part and check to see if the count of items retrieved is > 0 then insert that in the div, otherwise, insert your custom message and not rendering
the web part itself. What you're describing is the default message from SharePoint which comes from default views, and this can be changed from xslt in SP 2010 or in JSLink in SP 2013, here's a link how to do so in JSLink :
http://www.idubbs.com/blog/2015/jslink-csr-to-override-there-are-no-items-to-show-in-this-view/ .
But as said, since you're doing a visual web part, keep your stuff in the visual web part and check for the count of items before adding the rendered data to your div.
Mohamed Derhalli
SharePoint Consultant
Blog: SharePoint Thoughts
Twitter:
LinkedIn:

How to change a labels text which created at runtime?

hi,
i am creating label controls in runtime dynamically and adding them to a group component. this group component is in another custom component and i have lots of custom comp. in my app.
my question is how can access (via id) and change a labels text whict created at runtime?
i can change like this but i am setting id's and want to reach via id.
var lbl:mx.controls.Label = mx.controls.Label(subMenu5.group_subMenu5.getElementAt(1));
lbl.text = "good job";
thank you, have a good day.

First off, if you are already using a Spark Group, I would suggest you use a Spark Label instead of an MX Label. If you want to reference the Labels from the group, loop through the group's elements and check the if the element id matches the Label you want to assign text to.
var lbl:Label;
var n:int = myGroup.numElements;
for (var i:int = 0; i < n; i++)
     lbl = myGroup.getElementAt(i) as Label;
     if (lbl && lbl.id == "myLabel")
          lbl.text = "newText";

Change legend series text in graph

Similar Messages

Maybe you are looking for