Change Locale in Hyperion Server, not client

Hi all,
On fresh installation, Interactive Reporting Web Client uses default values - for instance, 'USA' for locale and date format as 'mm/dd/yy'
These settings can be changed on the client post installation.
What i want to be able to do is - Change the default values on the server files itself, so that the change need not be made for every client.
On the Server, there is a file 'intelligence.ini' at - $MIDDLEWARE_HOME/EPMSystem/products/biplus/common/config/
The last few lines are as follows:
*[Regional Settings]^M*
Language=English^M
FormatLocale=USA^M
*^M*
DefTimeStFmt=mm/dd/yy HH:MM AM^M
DefTimeFmt=HH:MM AM^M
DefDateFmt=mm/dd/yy^M
DefRealFmt=#,##0.#####^M
DefIntFmt=###0^M
DefNullStr=^M
DefMonth=mmm^M
I have set the FormatLocale as UK and date format as dd/mm/yy. I then re-installed IR Web Client on a Client system and found that it still uses the default USA locale. How is this happening?
IS there any other way these default settings can be changed on the server itself?
Thanks in advance.

Please have a look at Workspace Interactive Reporting Preferences Defaulting to USA format (Doc ID 726788.1) in MOS.
You will have to modify the below files:
- server.xml
- intelligence.ini
- intelligence_en_US.ini
HTH-
Jasmine.

Similar Messages

Sharing /usr/local and NIS server and client

I have two sun v880 with solaris 9 one is nis server and other nis client . The nis master sharing /usr/local with nis client. I need that one sun will be backup from other, if one stop working other continuos. What is que best practice for to do this, stop de nis service and copy /usr/local of one to other? Change nis client to nis slave? I don't have experience with solaris.

Do you only have 2 machines total?
You discuss two separate services: NIS and filesharing.
For NIS, all that is required is that you set up a slave. The slave continues to serve data (but not update it) while the master is down.
Sharing /usr/local is different. If it's just these 2 machines, instead of NFS I might set up rsync to copy the data over periodically.
Darren

I would like to know why when i make a web page and test in my local browser it works fine then when i tranfer to my server i does not work fine example i used javascript to put a prompt bar on a page and it worked fine local but on server not working

how come when i make a web site and i test it in my local server it works fine when i tranfer to server certain things do not work example i used javascript to put in a prompt bar for a newsletter page at the server it did not work but at local it did also it works at MOZZILLA but not internet explorer i also have cs4 was wondering if there is a way to test a page in dreamweaver and then transfer THANK YOU X-FACTOR-MEDIA

In future, please try to make the subject line of your posts shorter. In this case the following would have been sufficient: "JavaScript works locally, but not on remote server".
Short, but meaningful subject lines make it easier for others to identify what your question is about, and often bring faster help.

Changing port for http server not working, please help

Hi Gurus
I installed standalone hhtp server from db companion cd on AIX 5.3 10gR2.
I tested the http server URL http://XXX.XXX.XXX.com:7777/epdev/helloworld
after creating a procedure in the db and it works
But I need http server to use port 80 and not default of 7777
I did 2 changes in httpd.conf - Port 80 and Listen 80 But after this I am not
able to start http server . Can somebody tell me what am I missing here ?
I even tried starting it as root and got error as well
$HTTP_HOME/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=cov6053:6200
0 of 1 processes started.
ias-instance id=IAS-X-cov6053.6299
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=720916)
failed to start a managed process after the maximum retry limit
Log:
/export/host/thishost/unix/cen/app/oracle/product/http10.2/opmn/logs/HTTP_Server~1
The log file has this entry no error:
07/11/15 10:45:26 Start process
/export/host/thishost/unix/cen/app/oracle/product/http10.2/Apache/Apache/bin/apachectl start: execing httpd
Thanks a lot for your help

I was able to reslove this. Followed this :
On UNIX, you will hare to run as root if you want to run on ports less than 1024.
In order to run Oracle HTTP Server as root, perform the following steps:
Shutdown Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] stopproc ias-component=HTTP_Server
Change to root user. Navigate to ORACLE_HOME/Apache/Apache/bin on UNIX or ORACLE_HOME\Apache\Apache\bin on Windows and execute the following command:
chown root .apachectl
chmod 6750 .apachectl
Exit root.
Restart Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] restartproc ias-component=HTTP_Server

Turn Windows Phone into a video streaming server (not client)?

I want to stream video from a Windows Phone 8/8.1 device but I'm not sure where to start. I have done extensive web searching for C# examples or libraries to do this but everything I have found so far covers using the phone as a
client, not as a source.
I'm guessing I need to turn the phone into an RTSP server? If not, what is the correct technique or starting point for doing this? Main concerns are that the streaming be smooth and with minimal lag, since the Windows Phone (camera) is mounted on a robot
for remote navigation. Too much lag or video performance problems and navigation will be impossible. Any libraries or samples that show how to do this are greatly appreciated.
-- roschler

Hi Roschler,
Per my understanding, it is not support in public API. If you need this feature, you can vote it on UserVoice.
https://wpdev.uservoice.com/forums/110705-dev-platform.
If you are OEM developer, you can use your own channel to check if there is such API.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BPC Report emails only work from server (not client) - BPC v5.1

Hi all.
Hope someone might have seen something like this before.
Basically, I setup our servers to send email from BPC about 3 weeks ago.
(NB - If it makes a difference, we use Lotus Notes via a Domino server)
The SMTP settings are all correct in BPC WebAdmin, the servers have been added to the allow list on the mail server and the port is open.
Anyway, when I try to send mail from a client (using the Offline Report Distribution Wizard), I get the following error:
"The transport failed to connect to the server".
At SAP's suggestion, I ran a test by installing Office and a BPC client directly onto the Web Server.
When I ran the wizard from the server, the email sent perfectly.
The problem I have now is that although I informed SAP of the test outcome, I haven't heard anything back in about 3 weeks, and I really need to get the reporting email system up and running properly.
Does anyone have any suggestions on what could be causing this?
It's as though the system is telling the client to send the email itself, via the forwarding server, but this would mean allowing every user PC to access the mail server.
Hope you can help, but thanks for looking either way.
Craig

Hi Ludovic
The problem turned out to be mail server white-lists, due to the way that BPC sends emil.
Although you setup the email account/profile on the server, it actually sends from the client PC of whichever user makes the email request.
Our system is only configured to block all email requests with individual exceptions (ie a White-List).
It needed the PC of every user who would need to send email from the BPC system to be added to the white-list.
This is why it worked from the server, as we had added the server address to the list as part of the testing.
Not reall y a BPC problem, more of an issue with functionality due to the method that it uses to send the messages.
Hope that helps
Craig

How to Create WebService (the Server, not Client) from existing WSDL

Does anyone have any suggestions on how to create a WebService from existing WSDL. I have been asked to implement a WebService (the Server) based on WSDL from a standards based consortium. I have created several WebServices in the past and the generated WSDL under my control. Does Axis WebServices generate WebService service stub Java code?

Hai
you can create stubs for AXis webservices also
for help use the following link
http://www.onjava.com/pub/a/onjava/2002/06/05/axis.html?page1

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client ? what do I open and how do i put it in the right spot?

The simplest method is to run a defaults command on the client Macs (easily pushed via Apple Remote Desktop):
defaults write com.apple.SoftwareUpdate CatalogURL 'HTTP_URL_FOR_CATALOG'
for a user. If you run it via sudo it will set it for whenever you use softwareupdate as root.
The HTTP_URL_FOR_CATALOG has been changed with Mac OS X 10.6. If you use MCX it will automatically pick the new catalog – however if doing it manually the following URLs need to be used for whichever client version is in question:
Mac OS X 10.4: http://mysus.example.com:8088/index.sucatalog
Mac OS X 10.5: http://mysus.example.com:8088/index-leopard.merged-1.sucatalog.sucatalog
Mac OS X 10.6: http://mysus.example.com:8088/index-leopard-snowleopard.merged-1.sucatalog
Mac OS X 10.7: http://mysus.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
Mac OS X 10.8: index-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog
To double check this applied you can run the following command:
/usr/libexec/PlistBuddy -c Print /Library/Preferences/com.apple.SoftwareUpdate.plist
and /usr/libexec/PlistBuddy -c Print ~/Library/Preferences/com.apple.SoftwareUpdate.plist
to see what settings are for the computer and user appropriately.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
MCX
Another alternative is to use Workgroup Manager to manage the preferences via MCX from your server. This can be done for users, or for computers if they are bound to your Open Directory.
If you are using 10.5 Server or newer: you can simply use the Software Update section under Preferences.
Manually:
Choose the accounts, computers, or groups to have the preference applied to.
Click on Preferences, and then the Details tab
Press the Add… button and navigate to /Library/Preferences/com.apple.SoftwareUpdate.plist
Press Edit…
Under Often, add a New Key and enter the name CatalogURL
Make sure the type is string and then enter your SUS URL (eg. http://mysus.example.com:8088/index.sucatalog or if using 10.6: http://mysus.examle.com:8088/ – see above from the defaults section)
Press Apply Now, then Done. Once users/computers have refreshed their MCX settings (usually the next login or restart) the new settings will take over.
If this is working correctly when running Software Update (GUI) you should see the server address appear in parenthesis in the title of the window.
In order to have a system-wide configuration one has to run the following:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index.sucatalog"
In order to correctly work both on Leopard and Snow Leopard the right command to issue is:
defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index-leopard-snowleopard.merged-1.sucatalog"
Happily used and tested on my network
The DNS trick that Chealion points out is fantastic. I use it at our office, and every computer on our LAN will automatically pull the updates from the local repository at high speed without any configuration.
Create the swscan.apple.com DNS zone on your internal DNS server, and have it resolve via an A record to your Mac
Tags: automaticupdates mac clients macosx setting as default software update
Category: Serverfault
Share
0
0
Google +
0
0
0
5
You might also like:
Can I Update My Jb 4s To 6.1.2 Without Restore? Tue. Jan 21st, 2014
Iphone 4 Not Charging After Update To IOS6
IPad 2 Not Updating To IOS 5.1
How To Resolve The â€âunable To Install Updateâ€ Error For OTA IOS Updates?
What Is â€âSoftware Updateâ€ Doing When It Says â€âChecking For New Softwareâ€?
Advertisement
Comment
- See more at: http://www.eonlinegratis.com/2013/how-do-i-change-the-software-update-server-add ress-on-a-client-mac-to-use-my-own-server/#sthash.YhHp5zWk.dpuf

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

CR 2008 SP3 FP 3.4 does not provide SQL Server Native Client 10.0

One of my clients is running Crystal Reports 2008 SP3 Fix Pack 3.4 on a Windows 2008 R2 server and is running MS SQL 2008 (not R2) on a separate Windows 2008 R2 server. This was installed to correct printer issues. As expected, they started getting errors on some that use dates in the record selection formula.
I informed them that we needed to change the data connection driver from "Microsoft OLE DB Provider for SQL Server' to "SQL Server Native Client 10.0". When they go in to create a new data connection the OLE DB (ADO) Provider list does not list "SQL Server Native Client 10.0" as an option.
As I understand it from another thread on this site, this OLE DB client version is required for CR 2008 to properly interface with SQL 2008 and that it should be available after installing FP 3.2 or 3.3. I made sure that they installed all fix packs in their released order.
Can anyone shed some light on this for me?

Hello,
Actually there is:
{tblCaseData.CloseCodeID} = 2
and {tblCaseData.CaseSplitTrusteeCode} 'A'
and {%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} )
and {%sql_CountACH} = 0
and {%sql_CountNameIDParties} = 0
and {%sql_CourtWageDir} = 0
{%sql_Adj341Date} >= {?pf_BeginDate} and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ) is the result of NOT statement.
Try something like this:
{tblCaseData.CloseCodeID} = 2
and {tblCaseData.CaseSplitTrusteeCode} 'A'
and ({%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ))
and {%sql_CountACH} = 0
and {%sql_CountNameIDParties} = 0
and {%sql_CourtWageDir} = 0
I added AND/OR/NOT etc. logic to:
and ({%sql_Adj341Date} >= {?pf_BeginDate}
and {%sql_Adj341Date} < DateAdd ( 'd', 1, {?pf_EndDate} ))
You'll have to figure out what the correct bracketing should be for your data and what you want to get out of it. Possibly moving the date part to the end of the selection formula will "fix" this.
Thank you
Don

I can not connect to my newly installed local host cf server 9:

I can not connect to my newly installed local host cf server 9:
Oops! Firefox could not connect to 127.0.0.1:8500
Suggestions:
Try reloading: 127.0.0.1:8500/CFIDE/administrator/monitor/index.cfm
Search on Google:
can you help? same message with all 127.0.0.1:8500
urls, data or server admin....
Forta I 8/Edition files work with CF SERVER 9?

I have the same problem, on my primary computer (Windows XP Pro , but the cause may be different from what 123polis123 had.
It seems that the installer installed the Enterprise Multiserver configuration instead of the built in server.
Note that I installed sucessfully on my laptop (Windows XP Home), using the same install parameters.
I chose the "Server configuration" which has a self contained server tunning a single instance with an embedded JEE server. After running though all the installation screens, before proceeding with the actual installation, the installer reported the following:
Installation Type:
Server configuration
Licensing:
Developer Edition
Installation Directories:
Product: C:\ColdFusion9
Web root: C:\ColdFusion9\wwwroot
Server Information:
Web Server: Built-in web server
Port: 8500
ODBC Services: installed
Search Services: installed
ColdFusion Solr Search Services: installed
Microsoft .Net version: v 2.0.50727
.NET Java Port: 6085
.NET Client Port: 6086
Documentation: installed
RDS: enabled
Disk Space Information (for Installation Target):
Required: 1,089,069,939
Available: 7,387,262,976
The installation proceeded without a hitch, except at the end when the browser is supposed to come up with the admin configuration page it can't find the server. Port 8500 is open. I fiddled around awhile to see what the problem was. I installed on the other computer which went fine - the only difference is that the .NET version is 1.1.4322. I then re-installed, without uninstalling, on the problem computer. When the installer got to the screen where I select the server configuration, Enterprise Multiserver configuration was selected and it was not possible to select onything else. I uninstalled and re-installed. Same thing happened.
The processes running included: k2admin.exe, k2index.exe, k2server.exe and CFDotNetsvc.exe. The processes on the sucessful install included cfp.exe and cfupdate.exe.
Note that I had installed Eclipse and the CFEclipse plugin before installing CF9.

Firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"

firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"

you have not understood my point
how does this code will run on servlet when I want to upload a file from client's
machine to server machine
what I am doing is I am giving an option to the user that he/she can browse the file and then select any file and finally it's action is post in the jsp form for which I have sent the code
All the computers are connected in LAN
So how to upload a file from client's machine to server's machine
Plz give me a solution

Point a client to get software updates from the local OS X Server

I have an OS X Server that's serving only clients as a File Share device that I would like to use for Software Updates. There are three Mac Clients and a bunch of iOS clients. How do I use Software updates from the Server? I read the instructions on configuration but have the following questions:
Where do I find the correct port and catalog file name?
The instruction specify a port of 8088 and a catalog of 'index.sucatalog" in the example. Is this always the case?
I can write to the .plist specified but cannot read from it (get an error). I can see that the file has been written and the data is correct. What's wrong?

Apple's Software Update Server only provides updates for Apple Mac software. It does not provide updates for Mac Applications via the AppStore nor does it provide any updates for iOS devices.
Apple's Caching Server works differently. When a Mac or iOS device on your network requests an update from either the Mac AppStore or the iOS AppStore this will then be 'cached' on the server so that next time a device requests the same update it is available locally.
The URL for a local Software Update Server would be of the form
http://server.domain.com:8088/index.sucatalog
This would be written on a client Mac as follows
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://server.domain.com:8088/index.sucatalog
It would be read on a client Mac as follows
defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Note: Older versions of OS X had a version of the defaults command which did not like you including the file extension of the plist file so in the past the following would fail.
defaults read /Library/Preferences/com.apple.SoftwareUpdate.plist CatalogURL

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

Change Locale in Hyperion Server, not client

Similar Messages

Maybe you are looking for