Maintaining QM view to 80,000 materials

Hi qm gurus,
I just want to ask on how shall i maintain QM view to all 80,000 materials. Is there any easy way of doing these? After which i could make use of QA08 to activate all inspection types of different materials. But my problem is if i havent maintained the qm view to all materials; I cant mass change(QA08)..LSMW makes an error to me as it says select at least one view..but QM box is not displayed. wat is the problem of this??can anybody help me on this one.
Thanks'
Matildo, Edsel
QM Consultant

Hi,
Please try using transaction MM50 to extend views for a material.
Choose the maintainence status "Q" For quality management, enter plant & mateirals in multiple selection field & execute.
Regards,
Senthilkumar SD

Similar Messages

Purpose of maintaining classification view in material master

Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...

Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang

Maintaining costing view in BOM material

Hi all
I am doing product costing in process industry.For material costing purpose i need to maintain costing view for assigning overhead group, variance key in MM master which comes under that BOM.
e.g. If BOM material is FP01 and it has 3 components like RM01, RM02, RM03.Now my question is ' Should i maintain costing view only for one BOM material FP01 or should i maintain for all 4 materials i.e 1 finish product FP01 and 3 raw materials.
Any help would be appreciable and points rewarded
Regards
nilesh

Hi,
Maintain accounting and Costing views for all the materials.
Award Points suitably
Best Regards
surya

Is it possible to maintain a view vai Batch Input

Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian Liu

Additional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?

How to VIEW two tracks's materials SIMULTANEOUSLY and SYNCHRONIZED in MONITORS?
"Program-monitor" shows the final edited material, and "Source-monitor" shows only one track at a time, and NOT SYNCHRONIZED with the sequence. "MultiCam-monitor" shows the tracks as I need, BUT editing is very stiff: I want to do edits+cross-fades by hand IN THE TIMELEINE rather than by clicking the monitors. (Some of the "MultiCam-monitor's" other problems: 1) the timeline's time-inspector doesn't move while clicking the monitors, 2) vice-versa: monitor-image doesn't roll when the space-key is pressed for playback the timeline, 3) monitor doesn't show the cross-fades.....) I understand the "Reference-monitor" doesn't help either at this.
I would SO much like to SEE all tracks' materials simultaneously in whatever monitor, to edit efficently in the timeline.
Software: Premiere CS3 version 3.2.0
Operating System: Mac OS X (v10.4)

You can only do this in the multicamera monitor. That's what it's there for. Proper procedure is to cut there, then go to the timeline and add transitions.
If you're multicamera monitor playback isn't working correctly (I admit having a hard time understanding your points here), then try solving those.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Change Maintain Organization Views configurations in IMG

Hi,
We want to use the same organization view for all GRC components. Therefore I want to change the settings in the IMG Node u2018Governance, Risk and Complianceu2019 u2013 u2018Shared Master Data Settingsu2019 u2013 u2018Maintain Organization Viewsu2019 u2013 u2018Maintain Organization Views configurationsu2019. Currently the tabe is filled as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
003 / GRC-RM / Risk Hierarchy / Risk Hierarchy / Default view
I have recently created these entries myself since the original table was empty (I copied these settings from another environment). This results in all my RM risks currently connected to organizations from the standard hierarchy. However I cannot change them, since the Risk Hierarchy does not contain anything.
I would like to allign all three components and configure the table as follows:
002 / GRC-AC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-PC / Standard Hierarchy / Standard Hierarchy / Default view
002 / GRC-RM / Standard Hierarchy / Standard Hierarchy / Default view
However when I try to delete the row with '003' and create the italic one, GRC won´t allow me to save it, since I cannot change the default view for application component Risk Management.
Does anyone have a suggestion how to solve this problem?
Thanks a lot,
Joris

Hi Roberto,
To solve the problem, please follow the following steps (in the exact order):
- Go to IMG node "Activate Applicactions in Client"
- Disable the applications where you want to change the organization view
- Go to IMG node "Maintain Organization Views"
- Adjust the view as required (it is now possible to change the default view for the disabled components)
- Go back to the IMG Node "Activate Applications in Client"
- Enable the applications again
- Check the workflow post installation again (there were some problems at my instance, although I´m not sure whether that has been caused by these steps).
Please let me know if this solves the problem.
Joris van de Veerdonk

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

Same problem here...

MM50 Extend Mtrl costing view, but after maintaining costing view in OMS2.

Hello Sap Gurus,
I have a Unique Issue, i have created few 1000s Materials with material type ZDEN, now initially while creating these materials the costing View was not selected in the Material Type,
but after creating this 1000s of material under ZDEN material type, now we require Costing View to be maintained for this material which are already created,
so as an option we went to the material type ZDEN in OMS2 and extended the costing Views for the material type,
now if i go to MM50 to extend material costing views I'm not able to extend the costing view for the materials, it gives me an error no materials selected,
but alternately if i try extending the costing views individually for each material by MM01 transaction it allows me to extend costing views to the material selected,
is there any bug or issue note to be applied or any solution for this mass extension of views in material master, any bapi to extend Materials of this scenario,
Awaiting your reply,
Thanks and regards
S Kumar

when you create a material master after initial customizing of OMS2 then SAP writes the possible views into table MOFF
If you then do customizing in OMS2 and add the costing view, this is not updated for all your exsting materials
Hence you dont get them via MM50 because it selects the materials based on entries in MOFF, but you can extend with MM01 as SAP checks the current customizing.
execute transaction OMSM which can rebuilt the table and see if you then get your materials in MM50

Best Practice Regarding Maintaining Business Views/List of Values

Hello all,
I'm still in the learning process of using BOXI to run our Crystal Reports. I was never familiar with the BO environment before but I have recently learned that every dynamic parameter we create for a report, the Business View/Data Connectors/LOV are created on the Enterprise Repository the moment the Crystal Report is uploaded.
All of our reports are authored from a SQL Command statement and often times, various reports will use the same field name from the database for different reports. For example, we have several reports that use the field name "LOCATION" that exists on a good number of tables on the database.
When looking at the Repository, I've noticed there are several variations of LOCATION, all which I'm assuming belongs to one specific report. Having said that, I see that it can start to become a nightmare in trying to figure out which variation of LOCATION belongs to what report. Sooner or later, the Repository will need to be maintained a bit cleaner, and with the rate we author reports, I forsee a huge amount of headache down the road.
With that being said, what's the best practice in a nutshell when trying to maintain these repository items? Is it done indirectly on the Crystal Report authoring side where you name your parameter field identifiable to a specific report? Or is it done directly on the Repository side?
Thank you.

Eric, you'll get a faster qualified response if you post to the Business Objects Enterprise Administration forum as that forum is monitored by qualified support for BOE

Use of Delimit button while Maintaining a View

Hi Experts,
I have created a table with ENDDA as key field.
I have created the corresponding maintenance view for table and generated it .
Now while maintaining the entries in the view, I see a button 'DELIMIT' in menu bar.
I have created two entries with overlapping endda and begda.
When i select an entry and click on the DELIMIT button, its proposing a start date which is sy-datum( Today's date )...
I dont understand the exact functionality of this button.
Can some one please explain me DELIMIT button functionality?

>But any better solution to this.. Any SAP standard practice for this, as this is a very common scenario?
That is why we have plugs. You can not rely on the browser navigation buttons. If so, what would happen when you Web Dynpro Component is runnning within the Portal or the NetWeaver Business Client. That is why your navigation should be self contained with the component.

How to maintain several views of the same data and update a tree

I have an object UiUser, which is displayed in my application in several different views. There are three different views which all have the User object i.e. search results, user tree and user table. Each of the views has the same menu items, so the user can be deleted from any of the views.
What I am trying to work out is how should I ensure the item is updated in all of the views?
I can fire a property change event with the UiUser and update two of the views i.e. search results and user table, but how do I update the tree?
I thought of overiding the equals/hashcode methods of the UserTreeNode to compare uiUser.getId () and I could then search the tree and find the tree node of the required UiUser. But I have reservations about this whole approach as it just seems wrong.
Any ideas of how to keep N views in sync, I really don't want all of the views to have tree nodes as this equally seems wrong. This should be a simple problem to solve and I'm sure lots of people have done it, I'm just not sure which is the best approach to take.
Thanks

Hi Jan,
This is so because each installer has a GUID that is used to check whether the application needs to be upgraded or not. (It's a Microsoft function).
What you can do is create a new installer with a different GUID (copy the installer in the projects), and check witha text editor whether this GUID has changed.
But any specific reason you need two seperate installs? You can run the application twice with a specific INI token:
allowmultipleinstances=True
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Table for seeing the Views maintained for a material in material master

i have maintained CLASSIFICATION view for certain materials, but when i go to table MARC and check the maintenance status, i cannot see the letter "C" which stands for classification.
I need to sort out the materials for which classifiction view has been maintained.
Is there any other way to do it?
Pls help
Thanks
Neeraj

Hi
U Can check the status of Veiws maintained in MSTA
The views are
A Work scheduling
B Accounting
C Classification
D MRP
E Purchasing
F Production resources/tools
G Costing
K Basic data
L Storage
P Forecasting
Q Quality management
S Warehouse management
V Sales
X Plant stocks
Z Storage location stocks
thanks

Maintaining minimum stock only for few store materials

Dear All,
How can i maintain minimum stock level for few materials.
Can we maintain while creating mat in mm01 @ purc view or i need to do some other settings ?
B/regds,
CB

Hi,
You have to configure the MRP and maintain all the MRP parameter in to Material master.
After that Run the MRP by transection code MD03 , system will create the PR as per the data maintained in to MRP view of Material master.
Regards,
Manish

For Externally Procured Materials (ex - ROH) - SG's are maintained or not?

Hello
Do I need to maintain SG's ( like SG10, 40, 70) for ROH as these are externally procured?
As I see since ROH are externally procured, no need to maintain the SG (10, 40, 70,etc) in MRP 3 view of the ROH* material master as SG's (10, 40, 70)* are meant for maintianing PIRS & PIRs means it is inhouse production
Iam not limiting myself to SG's (10,40, 70) for ROH, instead any SG need not be maintained for ROH (externally procured)
If I want to see that ROH materials get consumed by the FERT then maintain SG 40/70 for the FERT/HALB (inhouse production) that should consume the ROH (externally procured)
Questions:
Q.For externally procured materials do I need to maintain the SG?
Q. If no need to maintain SG's for externally procured materials then what fields do I need to maintain to see that externally procured material which are used in the finished product gets consumed by sales orders?
Please clarify
Thank You

Pradeep
Thank you for your reply & time
If the component is semifinished & is externally procured, then following settings needs to be maintained
Procurement Type : F
Special Procurement Key : 30 (subcontracting)
But Subcontracting(30) is used when we want semifinshed product to be manufactured outside the company from a raw material issued by the company
& control key we maintain is PP02
In above scenario, then we go for subcontracting or else we need not maintain the subcontracting
Please clarify
In your answer (" u have to set Individual/coll = 1 or blank at MRR of Down level material.")
what does MRR stand for
Due points have been assigned

Maintaining QM view to 80,000 materials

Similar Messages

Maybe you are looking for