Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

Similar Messages

How to install Oracle Change Management Pack for 11g database.

Hi,
I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
Oracle Configuration Management Pack
Oracle Data Masking Pack
Oracle Diagnostic Pack
Oracle Tuning Pack
using following URL
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
Regards
DBA.

As far as I could understand, this is a part of Oracle EM/Grid installation:
The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software.

Programmatically change management cert for multiple (600+) subscriptions

Our service has 600+ subscriptions, and they all share the same management cert.
Due to security reason, we would like to change management cert on the subscriptions periodically, but I have not yet found a way to do so programmatically.
I have found the "Add Service Certificate" cmdlet but it only allows you to upload the "Service certificate per service",
and I need to be able to change "Management cert" for all 600+ subscriptions.
Could you please tell me if there is a programmatic way to do so?

I'v just write a blog show how to use Managment class libraries.
You can refer to my
blog, or Download the
code sample I upload to MSDN and add the managment class libraries to your project.
Then Add Certificate like this:
ComputeManagementClient client = new ComputeManagementClient(cloudCredentials);
ServiceCertificateCreateParameters parm = new ServiceCertificateCreateParameters()
Data = certByte,//the certificate your want to add(convert to byte[] the certificate should be pfx )
CertificateFormat = CertificateFormat.Pfx,
Password="YouPassword"
var hostedServices = client.HostedServices.List();
foreach (var service in hostedServices)
client.ServiceCertificates.Create(service.ServiceName, parm);
Console.ReadLine();
Please mark post as answered if it helped!

Change Management configuration

Hi Guys,
We have solution manager 7.0 with latest support pack stack. We have a requirement of configuring service desk with change management. I have configured service desk and it is working.
I am not bale to understand how to configure Change management and how will it works. Can you guys send me the link for configuring change management and how we will test it.
Is service desk configuration is required for change management??
Thanks in advance.
Thanks,
Bhanu Pratap Singh

Hi,
ChaRM is basically based on Service Desk. But if you do not want to there is no need to use Service Desk features.
You may create Change Requests and Change Documents without Service Desk.
Usually you get an incident via Support Message. This Support Message contains all the required information. If the problem cannot be fixed without a change in the SAP system, then you will create a Change Request from Support Message. The request will also contain most of the information from support message. The Change Manager then approves or denies the Change Request. If he approves it then a Change Document (normal correction in most cases) will be created. This normal correction is tied to a project in solution manager which contains your system landscape and (basically) controls what will happen with the transports assigned to each normal correction.
It is possible to customize (approval) workflows by your needs.
ChaRM configuration can be done by following the IMG path for Change Management.
There are also some (more or less up-to-date) Web Blogs in this forum about that topic.
Hope this helps.

In-Band Management configuration for 2530 array from T5120 on Solaris 10

Hi All,
I am trying to configure in-band management for storagetek array 2530 from T5120 server on Solaris 10. I could able to connect the array from CAM software and it is showing as out-of-band. I can able to change the array name and IP address also. But when i try to configure In-Band Management i am having problems.
OS Installed on the server: Solaris 10 5/08
Hardware : T5120
Array : Storage Tek 2530
Below are the packages i installed:
SMagent-SOL-90[1].00.00.06.pkg
SMruntime-SOL-10[1].10.02.00.pkg
once after i installed the above packages i am getting below error
"SANtricity Storage Array Host Agent, Version 90.00.00.06
Built Wed May 23 09:02:26 CDT 2007
Copyright (C) 1999-2007 LSI Logic Corporation. All rights reserved.
Checking device /dev/rdsk/c1t0d0s2 : Skipping
The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
The Host Context Agent did NOT start because 0 controllers were found.
Oct 9 19:51:10 proto-hd1 SMagent: The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
Oct 9 19:51:10 proto-hd1 SMagent: The Host Context Agent did NOT start because 0 controllers were found."
As per sun documentation i ran the below commands, but still i am getting above error.
# setenv LD_LIBRARY_PATH /opt/SMgr/agent
# java -classpath /opt/SMgr/agent/SMagent.jar devmgr.versioned.agent.DeviceIdentifier | grep "Volume Access"
Any help would be really help ful.
Thanks,
Raja

Make sure the mapping to Access Group has not been deleted.
Use the command /opt/SUNWsefms/bin/lsscs list -a array mappingYou must see samething like
Volume:Access LUN: 31mapped.via mapped.via.default.groupmapped.target.type mapped.via.default.group Permission: Read Only
...If you don't see this recreate mapping
/opt/SUNWsefms/bin/lsscs map -a array -l 31 volume Accessand restart agent
/etc/init.d/SMagent start

In-Band Management configuration for f5100 array from T5440 on Solaris 10

Hi All,
I am trying to configure in-band management for storagetek array Sun Storage F5100 from T5440 server on Solaris 10.
OS Installed on the server: Solaris 10 10/09
Hardware : T5440
Array : Sun Storage F5100
Sun Storage F5100 have 20 FMODs which can see from format output. But In-Band management don't work, i want to manage it by CAM.
/dev/rdsk/c2t0d0s2
/dev/rdsk/c2t1d0s2
/dev/rdsk/c2t2d0s2
/dev/rdsk/c2t3d0s2
/dev/rdsk/c2t4d0s2
/dev/rdsk/c2t5d0s2
/dev/rdsk/c2t6d0s2
/dev/rdsk/c2t7d0s2
/dev/rdsk/c2t8d0s2
/dev/rdsk/c3t0d0s2
/dev/rdsk/c3t1d0s2
/dev/rdsk/c3t2d0s2
/dev/rdsk/c3t3d0s2
/dev/rdsk/c3t4d0s2
/dev/rdsk/c3t5d0s2
/dev/rdsk/c3t6d0s2
/dev/rdsk/c3t7d0s2
/dev/rdsk/c3t8d0s2
Below are the packages i installed:
host_sw_solaris_6.6.0.11
SMagent-SOL-90.01.02.05.pkg
SMruntime-SOL-90.60.02.01.pkg
once after i installed the above packages i am getting below error
SANtricity Storage Manager Agent, Version 90.01.02.05
Built Wed May 06 06:21:07 CDT 2009
Copyright 2009 Sun Microsystems Inc. All rights reserved. Use is subject to license agreement.
Checking device /dev/rdsk/c0t2d0s2 : Skipping
Checking device /dev/rdsk/c0t3d0s2 : Skipping
Checking device /dev/rdsk/c2t0d0s2 : Skipping
Checking device /dev/rdsk/c2t1d0s2 : Skipping
Checking device /dev/rdsk/c2t2d0s2 : Skipping
Checking device /dev/rdsk/c2t3d0s2 : Skipping
Checking device /dev/rdsk/c2t4d0s2 : Skipping
Checking device /dev/rdsk/c2t5d0s2 : Skipping
Checking device /dev/rdsk/c2t6d0s2 : Skipping
Checking device /dev/rdsk/c2t7d0s2 : Skipping
Checking device /dev/rdsk/c2t8d0s2 : Skipping
Checking device /dev/rdsk/c3t0d0s2 : Skipping
Checking device /dev/rdsk/c3t1d0s2 : Skipping
Checking device /dev/rdsk/c3t2d0s2 : Skipping
Checking device /dev/rdsk/c3t3d0s2 : Skipping
Checking device /dev/rdsk/c3t4d0s2 : Skipping
Checking device /dev/rdsk/c3t5d0s2 : Skipping
Checking device /dev/rdsk/c3t6d0s2 : Skipping
Checking device /dev/rdsk/c3t7d0s2 : Skipping
Checking device /dev/rdsk/c3t8d0s2 : Skipping
The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
Jul 23 13:56:47 sol10 SMagent: The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
As per sun documentation i ran the below commands, but still i am getting above error.
# setenv LD_LIBRARY_PATH /opt/SMgr/agent
# java -classpath /opt/SMgr/agent/SMagent.jar devmgr.versioned.agent.DeviceIdentifier | grep "Volume Access"
But any output with above commands.
Any help would be really help ful.
Thanks,
gebilong

Make sure the mapping to Access Group has not been deleted.
Use the command /opt/SUNWsefms/bin/lsscs list -a array mappingYou must see samething like
Volume:Access LUN: 31mapped.via mapped.via.default.groupmapped.target.type mapped.via.default.group Permission: Read Only
...If you don't see this recreate mapping
/opt/SUNWsefms/bin/lsscs map -a array -l 31 volume Accessand restart agent
/etc/init.d/SMagent start

Language change despite configurated for English

I've been using iTunes without problems for nearly two years. Several days ago, however, the language in several places, for example in iTunes Store, changed from English, which is what is configured in Preferences, to Italian. Now, for example, on the homepage, I read "Musica" instead of "Music." When do a search for a podcast and get the results, in the "Price" column it reads "gratis" instead of "free" and the price is in euros and not dollars. I imagine this is because I am currently in Italy.
By chance, I've just logged into my iTunes account and got a message saying it wasn't activated (or words to that effect) for purchases other than in the U.S.. I clicked on something -- I don't remember what exactly -- and now everything is back to the way it was: in English. But I still have no idea why it changed in the first place. I didn't buy anything. I didn't change the language preference. Whatever happened, it was only by chance that I've fixed it.
Any ideas on why this happened. Is it likely to happen again? If so, will logging into my account resolve it again?
Thank you.

Is your problem only in the store?
If you look at the bottom of the store home page you will find a My Store button where you can set your country.
A few people have reported their country changing although usually with an upgrade.
In iTunes itself you set the country in Edit>>Preferences>>General. The change only takes effect when you restart iTunes.

Inventory management configuration for Rollout project.

Hi all,
We have created new plant using Copy function (using reference Plant).
Kindly let me know
what are other configuration required for Inventory management in new plant?
Please provide if any check list available for Roll-out project.
Thanks
SAP-PQ

Hi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale

Change Management process for Report Painter tool...

Hi everyone,
I am curious to see what process is used out in the industry to allow report painter reports to be defined and executed in production. Do users define their reports in DEV and use the STMS or the export/import feature or do they create them directly in the PROD environment? I personnally think it should be created in DEV and promoted to the remaining servers within the landscape for proper change and release management.
Do any of your technical resource monitor and look at reports before they are moved to another environment or do you allow your systems analyst or even end users to create their own report without any monitoring by technical resources? How stable is report painter and is there any major performance issue while defining any type of reports?
Any comments are welcomed and appreciated.
Thanks in advance,
Luc

Hi Luc,
In vast majority of project I have been participated, the report painter was in responsibility of the consultants and not the users. Usually, these reports were created in test system and then exported, via standard export/import functionalities, to production.
Of course, one can create those reports directly in production (though, without creating a transaction code for them - this will involve CR), but I'd recommend to stick to 'first TEST, then PROD' model. This would put some order in the reports directories, as the creation of a new report will be controlled.
Since, these reports based on totals tables, no performance problems are anticipated.
Regards,
Eli

ALE/Change Pointer Configuration for ZSEGMENTS

Hello all,
I have been searching for a few days now trying to obtain my requirement with extending of an idoc. I am working with the following:
Message Type: HRMD_A
BASIC Type: HRMD_A06
Extension: ZHRMDA06
I extended the idoc because I wanted to include 2 extra infotypes which are not on that idoc. Infotypes 77 and 709.
Here is what I have completed so far.
WE30...Created ZSEGMENTS to include below.
WE31...Extended the HRMD_A idoc to include the ZSEGMENTS defined below.
WE82...Updated the output types and assignments to idoc.
BD61...Activate Change Pointers
BD50...Activated change pointer for HRMD_A.
I change the address field in infotype 0006.
Run the BD21...idoc is generated with the changes to address, everything looks good.
Do the same thing for the ethnic origin on infotype 77, no idoc is generated.
I turned on logging onto table PA0077.
I am evaluating the change logs via SCU3, and I am seeing my changes on the field.
What I have tried...
I have tried creating a object in t-code SCDO (ZTEST)
I have associated ZTEST with table/field PA0077-RACKY.
Tried running BD21...No iDoc generated.
I have been researching for a few days and it feels that this should be able to be done through configuration and not custom coding. Am I wrong to think that?
Has anyone ever did anything like this before which they can point to documentation or even the appropriate search criteria on the SCN forums.
Thanks in advance for your help!
Jason

Hi Jason,
I believe you have to enter the fields that trigger the changing pointer in tcode BD52. In my case these are the fields for BOM:
Regards,
Custodio

Solution manager configuration for EHP4 install (Product Version Problem)

Hi guys!
I'm new on SAP and SDN is a help all days and this time i really need some help from you guys!
Im installing EHP 4 and need the XML Stack file, so i go to the solution manager to generating them. But after configuring the logical components, make the associations, etc. on create maintenence transaction, the product version dropdownlist is empty...
It is configured but it dont appears... Anyone had this problem before and could give me some help!
I will appreciate that!
My regards,

Hi,
In SMSY, the system should have product version as SAP ERP 6.0.
Next the logical component created for ECC Server should also reflect this version.
The solution you create in DWSP should include this logical component via the Solution Landscape definition. Here again the logical component should show the product version.
If all above are in place, the MOPZ for the respective solution should have the product version list populated.
Regards,
Srikishan

Solution manager configuration for SRM

Hi all
we are goin to configure SAP SRM 5.0. we need to configure standard business scenarios in solution manager for the same.can somebody provide relevant links and documents regarding where to find these in solution manager and how to go about this?this would be really helpful.points would be awarded immediately.

Hi Harsa,
Here you can find the Webex recorded sessions
https://websmp207.sap-ag.de/~sapidb/011000358700000429402008E
Hareesha

Change Management Process for SAP Queries

Our company has recently implemented SAP. We are having some struggles with agreeing on a process for developing queries in SQ01. Our functional specialists currently have to create a query in DEV200 then download to DEV100 to create a transport.
Is this the general practice? It seems very strange and way too cumbersome considering SAP Query was designed for quick access to data. As for security the tables are already protected by the roles assigned to the users and the queries are assigned to User Groups within the query.
It also seems that HR uses the queries for all kinds of data searching so access to SQ01 to create a quick query in PRD seems appropriate.

Hi Karen,
I have seen some companies severly restrict query writing and usage because queries, if not written well, can seriously degrade system performance.
A potential rationale for your company's approach could be to test the query's efficacy and resulting system performance when a query is run. However, this kind of test won't be very accurate unless you do frequent refreshes of your production system.
I have been with some companies who do write queries in PRD, but the ability to write queries is limited to a very few number of people and they wind up becoming strictly query writers which somewhat defeats the purpose.
A lot of the answer to how your company should approach query writing is going to depend on your landscape, who has access to write queries, and if that access is to information that crosses all functions or is limited to a smaller set of data.
If your company has always had information dissemination controlled by IT, i.e. users have historically had to go to a central group to get a report, then there will be cultural changes needed as well as training if the user population should write queries directly in PRD.
Regards,
Julie

Change keyboard configuration for special keys

Hi guys,
I want to change the default behaviour for some special keys when running windows.
I want the Cmd (Mac) key to be the Alt (Win) key and the Fn (Mac) key to be the Ctrl (Win) key.
Is this possible?

Thanks for your answer Fortuny, but it seems the Ctrl and Alt keys can't be re-mapped using that application... I'll keep searching
Edit: You pointed me in the right direction I found a similar application to the MSKLC called SharpKeys, I was not able to edit the Fn key, but at least a could remap the left Cmd key to be the Alt key.
Message was edited by: Apolyon

Managed System configuration in Solman 7.1 sp11??

Hi All,
I have done new installation of solman 7.1 and upgraded to sp11.
I did system preparation and basis configuration in solman_setup.
I have one query how to add ERP production system to SLD and how to do managed system configuration for that.
I want to add ERP Production system and Managed configuration for that and MOPZ,EWA configuration ERP Production system.
Please help me in this...
Here i attached screen shot for your reference.
Presently in managed system Only Solman system is visible.
Thank in Advance
Chandra

Hi,
Please chekc th ebelow guide
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
https://websmp104.sap-ag.de/~iron/fm/011000358700000209862011E/012002523100005267752014WRK2?TMP=1407918324257#bkm_show1_…
go to Configuration of SAP Solution Manager
Normally y this demo and guide will be available http://service.sap.com/rkt-solman
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Normally after addition in SLD ,system will adding the system in LMDB ,then added in smsy automatically. check the Job LMDB*
Update the CR content in SLD , check th below note fpor the smae.
Note 669669 - Updating the SAP Component Repository in the SLD
LMDB FQA:
Landscape Management Database (LMDB) – FAQ
Product system Editor in LMDB:
New in SP05: Product System Editor in the Landscape Management Database of SAP Solution Manager 7.1
Maintenance of Product in the System Landscape - SAP Solution Manager Setup - SCN Wiki
Rg,
Karthik

Change Management Configuration for SolMan 4.0 SP13

Similar Messages

Maybe you are looking for