Change of Equipment History - PM

Hi,
In SAP ECC 6.0 release note, shows as an improvement :
16.4.2.2 Change of Equipment History (New)
As of SAP ECC 6.0 (SAP_APPL 600), you can make back-dated changes to the equipment history. In
the process, the following data is taken into consideration and corrected:
- Equipment master data and equipment history
- Definition of the measurement reading transfer and adjustment of the corresponding measurement
documents
- Notifications that affect installation, removal, and exchange.
Do someone know in which transaction i can see this ???
Thanks,
Dalmiro

hi
for changing the equipment history there are 3 phases
1Replace the actual history with the target history
2Create the relationships for the measurement reading transfer(automatically done by system)
3Adjust the notifications
for first phase you have to create a target history using IEQCM1 and replace the actual history with the target history
there are various prequistie for this kindly refer the following links
[Changing an Equipment History |http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/ca423b2ab76bade10000000a1553f6/content.htm]
[Replacing an Actual History with a Target History |http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/ce35762ff85043e10000000a1553f6/content.htm]
[Adjustment of Notifications|http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/ccc30344b16bb0e10000000a1553f6/content.htm]
regards
thyagarajan

Similar Messages

Get Equipment History

Hi,
I am looking for a BAPI or function module to get the equipment history, basically the same way as when we click extras-->display changes and it gives all the changes made with date, time and old and new values of the change made. This is urgent and any help would be greatly appreciated and rewarded.
Thanks,
David.

I guess there is no fm but you can get if you use query.
Check the below link :
http://www.sapfans.com/forums/viewtopic.php?t=291348&highlight=equipment+history
Thanks
Seshu

Changes on equipment are not saved at the backend (MAM30_031)

Hi,
if I change some equipment data e.g. street and city on the client, this changes are not done at the equipment in the backend. Status of MAM30_031 is I-Finished which holds the correct changed data inside. But if I now look into the equipment at the backend, there's still the old data. Changes done at the backend are synchronized fine to the client, but not the other way.
Any idea why this doesn't work?
Thank you and regards,
Florian

Hi Florian,
here is what I would do:
1. Check in "O-Sent" in a sequence which is a response for the change in equipment what is the status of your change. There should be something like, "All top updated successfully...", or "Conflict...", or "BAPI return...". That will give you and idea what happens with your change.
2. If you "Successful"... message or no message - that is garanteed BAPI problem. You should open OSS message to SAP (component XAP-MBA-MAM).
Which version of MAM3.0 SR3 you are running? There is Patch02 which I know for sure has some fixes for technical object change fucntionality. (If you are on the lower version: reintsallation will be required, there are SynBo changes either in Patch01, or Patch02, don't remember exactly which).
Cheers,
Larissa Limarova

Since upgrading to 8.0.1, I can't change my Privacy History setting.

Since upgrading to 8.0.1, my pinned application tabs disappear every time I restart firefox. One of the troubleshooting suggestions was to change Options.Privacy.History to "Use Custom Settings for History". I make this change and close the Options dialog. If I reopen the Options dialog, my changes are gone. Any ideas?

To the original question of how to sync. If you have tried the usual routes via selecting Playlists from your Device Music page. And/Or Drag and dropping a playlist onto your device and neither work, it may be that your songs are unchecked.
Right Click on a song in your playlist you are trying to sync. If the entryies at the bottom give you the option to Check selection. Then click this and repeat for all songs in that playlist. You can select all songs in a playlist by Cmd + A
If you see Uncheck Selection then this is not the cause. It must be something else.

Is there a way to restrict changing the browsing history in safari with ought restricting the entire application?

Is there a way to restrict changing the browsing history in safari with ought restricting the entire application?

For the iPod touch in your profile?
Private browsing help here > iOS: Safari web settings
For Safari for Mac OS X ...
From your Safari menu bar click Safari > Private Browsing
You can only block all history in Private Browsing, pages you visit, and autofill.

Authorization to change BOM with history requirements

Hi Techies,
I m facing an issue now with respect to authorisation of changing BOM with history requirements. Our quality system was a copy from a production server which was used for CRM before. Usually in SAP when we change a BOM with a change number we cant again change it back without a change number.
In our case it is not providing an error but it is providing a warning. Now my requirement is to change this warning message to error message. So that people wont change BOM without a change number.
I tried to enter the transaction SU24 and found the authorizaton C_STUE_NOH with proposal YS. Then i tried to change the filed value to ' ' (NO) and saved it.
But still i m not able to change the warning message to error message.
Is there any other setting i need to carry out for this.
Please help me with this issue.
Thanking you in advance.
Regards,
Kris.S

Dear Krishu,
Below has been mentioned in OSS note: 420878. Check once again you have save as NO. Then go to tcode SU03 Object Class PP/ C_STUE_ROH
Summary
Symptom
In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
Additional key words
CS02, change number, OS27, W045(29)
Cause and prerequisites
Authorization profile
Solution
Check the authorization profile of the respective user.
Example:
         C_STUE_NOH <OBJ>
            &_SAP_ALL    <AUT>
                NOHIS      <FLD>
would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
Regards / US

Z-Report for Equipment History

Hello Experts,
I have a requirement from my client, that they would like to have an Equipment History based on there legacy system, where they would like to have a report comprising of Both Notifications and orders based on Equipment.
the out put should be the list of notification and orders with there Category, duration, list of operations and components issued(in orders), and reported by fields.
Please help
and thanks in advance
Regards,
Yawar Khan

Hi,
The report details can be seen in standard SAP. If you see in the menu option after executing IW38 or IW39 etc you have option of selecting multiple level reports, and goods movement reports etc.
As you were asking relavent to equipment then you have to filter the output report and then just go to multi level reports.
The details you were asking will not be available in single screen except in multi level reports. Here also you have choice to create variant.
Regards,
NNR

Change the name "history", "back" and "forward" of the top-menu

hello,
how can I change the name "history", "back" and "forward" of the top-menu in another language??
Thank you for every response.
Regards,
Sergio

Sergio,
I suggest opening OSS message with SAP on the issue.
Translation for "history", "back" and "forward" of the top-menu to Romanian should be delivered with EP.
If it was not done and SAP delivered partially translated content, SAP tech support should provide you with
the solution. If you find it, please post to forum for the benefit of other people.
Regards,
Slava

Tracking Data Changes with Record History (WHO)

Hi all ,
I've a custom form & i need to Tracking Data Changes with Record History (WHO) will anyone show me example of how it's done because i tried to go through the application developer guide but unfortunatelly this part isnot tht clear with me
waiting your reply
thanks

Hi,
Good question, a colleague asked me the same yesterday - i will find out officially for you.
Regards,
H

Equipment history

hi friends,
is it possible to access equipment history book. may i know the transaction code for that.
thanks
sanjeev

what I have mentioned is to insert Serial data tab in Equipment Master.
To insert the Serial Data tab, you have to go to Menu bar,(ie02) select EDIT----
>VIEW SELECTION
This will open up a small window and there you will find a check box to select/deselect. There you have to select the Check Box against SER DATA.
Then only you will get Serial data tab.
As Mr.Thiyagarajan mentioned, you should create a Material Number and a Serial Number using MM01. Then only you will get the HISTORY Button in Serial Data tab.
Please check and revert back
Sam

Equipment History Table

Hi Experts,
I want to know the Table where the Equipment history details (Installation / Dismantling etc.) are stored.
Would appreciate if you can provide the Field where the Equipment Installation date is stored.
Regards,
Thushantha.

Hi,
Lets take an example of EQUI table...
Here if suppose, we have 2 key fields MANDT(100) and EQUI(000000000000011010),
then in the query to CDHDR table we have to concatenate the key field values
OBJECTCLAS --> Concatenate MANDT AND EQUI (100000000000000011010)
OBJECTID --> EQUI (for Equipments)
You can use the additional fields like user name, date and time you know them.....
Hope this helps.
Regards,
Kunjal

Equipment History report ( imorove performance)

Hi all,
My requirement is to pull the equipment history report based on the valid from date field and user status
I also have selection screen parameters as
Vaid from date field v_equi-datab.
functional location v_equi-tplnr
technician id v_equi-TIDNR
Partner ihpa-parnr.
my problem is fetching data from v_equi is taking long time as im not using any key field or hitting index on the tables.
Is there any better way to pull the history data based on valid from date.
Please let me know if you need more info

I have coded it that way just using datab in where condition.
i wanted to know if there is any other better way to pull the data.
Will it help creating index on datab field.
Thanks
Vijay

Combining Equipment history

I hope one of you experts can suggest a solution for us.
Our company operates with several mining sites that swap equipment back and forth from time to time. When we switched one plant over to SAP we inadvertently input a piece of equipment from another site into the system as new. Now we have two histories for these multi million dollar pieces of equipment.
Is there a way to combine the two separate histories for these? Are there other options you can suggest?
Thanks for your time.

Hello Joel,
I have some clarity issues in your post. The line 'When we switched one plant over to SAP' indicates that one mining site among your several such, has been recently implemented SAP. If it is true, then the line 'Combining two separate histories' indicates a requirement of importing the Equipment History from the Legacy system to SAP system. This is a natural requirement during SAP implementations. SAP has tools such as LSMW or ABAP to develop BDC program for such data migration. If this is the case exactly, then for future implementations (SAP in other mining sites) you should better opt for a single maintenance plant, having these sites as Functional locations. In such case this Equipment can be easily dismantled from one place and put in other without any history issues.
On the other side, if your case is like, already having SAP implemented in several mining sites (plants) and you have created New equipment for the same physical entity in other plants, then see this thread to know how to transfer Equipment between two maint plants:Move equipment from one plant to another. This will continue the same history of the equipments. If this case is true, you can take help of the tools mentioned above for combining the histories created separately for few days so far. In this process obviously you need to discard few new equipments created.
Hope this helps
KJogeswaraRao

Reg EQUIPMENT History

Hi PPL,
I have a problem where , in the Notification IW32 in the Objects Tab when i
enter tha value of the Serial No and Material with the Notification No in the first line
and save it , the Service Order for the Notification does not appear in the Equipment - SERDATA - History.
Whereas when i enter the Serial No and the Material No in the first line of the Objects Tab and i enter the same serial No and the Material No in the Second Line of the Object Tab along with the Notification No , the corresponding Service Order appears in the SERDATA History of the Equipment.
What could be the Problem and How to rectify the Problem ?
I hav posted this question a couple of times in the forum and am yet to receive an
Guidance on how to resolve the Issue .I wud be very grateful for your Advice.
Regards,
Kevin Nick.

Hi,
Check the following Equipment related Enhancements/exits.
IEQM0001 Additional checks when installing equipment at functional locations
IEQM0002 Additional checks when defining equipment hierarchies
IEQM0003 Additional checks before updating equipment
IEQM0004 Object permitted for contract partner (Order -> Maintenance contract)
IEQM0005 Object permitted for SD contract (Maintenance contract -> Maintenance contract)
IEQM0006 Object permitted for SD contract (maintenance of maintenance contract)
IEQM0007 Check/change to manufacturer field for equipment status
Regards,
Anji

How can I get safari to change the website history to follow an old domain name to a different sitedifferent

I have a domain name that I changed to point to a different website. But it is still pointing to the old site. When I put the domain name in my iPad, it goes to the new site. But the old site seems to be in the memory of Safari on my computer. Any ideas?

Delete the old bookmark and create a new one. If not bookmarked, just delete your History.

Change of Equipment History - PM

Similar Messages

Maybe you are looking for