Change of number over time

is there any standard FM to calculate change of number over time .
where Z is my number.i have to find change of Z over a time period.
i.e I have to find dZ.
Any idea.
Thanks in advance.
Message was edited by:
Maya Vinothini

Do u mean the differenciation operation??
if yes try to do this way.
do 10000 times.
calculate the change over the dependent variable in small intervals.
of independent variable.
dz = dz+ (d2-d1 ) " accumulate values
enddo.
dz = dz/10000. " divide by the number of times.

Similar Messages

Changing a Filter Over Time

I've had a lot of trouble with this. I'm trying to change a filter over time (i.e. make a voice get more reverberative as it continues). I've had a little luck with some filters--some of the options for the filter show up on the envelope line so I can set key frames, but more often than not, nothing shows up there at all, or what does show up there is not the option I want to change.
For example, say I want to change pitch over time. The only option that shows up that I can set key frames for is the delay rather than the pitch.
I know I'm missing something simple here.

So, I take it that you're in STP, working on a multi-track project.
In the lower left on the effects tab, go to the correct track/effect you want to change, and click the disclosure triangle to show all of the parameters. Check the box to the right of each parameter you want to change over time, and it will be added to the available envelopes.
Hope this helps!

BT changed my number 6 times in 6 days! Death in ...

Ok someone explain this to me - 6 number in 6 days. I migrated to BT from another provider and requested to keep the same number.
Here's how it went - the VERY, VERY short version.
Day 1 - The changeover day - no dial tone for the whole day - 1 hour phone call and advised to "wait until tomorrow"
Day 2 - Given a random phone number - told this was 'normal practice' - how else can BT change the number without giving me a temporary number...
Day 3 - another random number - "sir - I don't know what went wrong with that..."
Day 4 - yet another number - can't quite believe it - more phone calls trying to get hold of a manager - a manager will phone me tomorrow.
Day 5 - Still no phone call from a manager - yet another different phone number - yet another promise - "Sir you have my word as a gentleman - your line will definitely be fixed by tomorrow at 10.20 am"
Day 6 - yet another number - the manager (not a CS manager) I have managed to track down says there is not even a record of my original number! Even though the last thing I asked the advisor form the previous day was "Please repeat back to me the original number". He did so...
Day 7 - Seems to be a real CS manager this time - guess what - another number. I'm assured once again that my number will be reinstated tomorrow - she will see to it personally.
Day 8 - got the number back.
Now - this was a bad week for this to happen. My Uncle had just died and I had to deal with funeral arrangements. His wife had a fall and is now in hospital with a fractured pelvis. Friends, family, hospital, undertaker - all trying to get a hold of me. You get the picture.
In the meantime my ISP had cut me off as the line is dead and they can't get a hold of me. £140 for a reconnect - they are ENTANET - (Seriously Internet).
All because I went back to BT.
Anyone that's taken the time to read this - BEWARE OF BT!!!!!!
Official complaint going into OFCOM - requested copies of all data and transcripts of phone calls (maybe 5-6 hours in total). Someone has a lot of explaining to do - preferably in a court of law!

Hi Paolo9846732,
Thanks for posting. I'm really sorry for the problems you've had in getting your number back. It looks as though you've got it sorted but if you have any further problems please do get back to us. If you want to drop me an email with the details you'll find the contact details by clicking on my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How do I change the number of times my phone rings before going to voice mail?

I want to make calls go to voice mail after 3 or 4 rings. Right now it is taking about 5 to 6 rings. Can I make this change?
Thank you!
KimberlyO

I'm sorry to see your co-worker was not able to reach you kaokim. We know how important it is to be able to receive and make calls in a reliable manner. I apologize for the inconvenience this may have caused.
As advised earlier in the thread, there is a specific time it will ring, and it can't be changed. However, to make sure you're provisioned correctly, make sure call forwarding is disabled by calling *73.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Changing MIDI Velocity over time to affect samples in the ES2

Hello all!
I'm using ES2 horn samples in a track. The ES2 features crossfades between different velocity layers which is great! But I don't know how I would utilise this feature on a single sustained note.
I'm trying to create a Horn fade in on a long note across the course of a bar and it sounds a bit rubbish! I'm using automation currently and what I suspect is happening is that it is simply changing the volume of the ES2's initial sample and not changing the velocity. I want to work up from a quiet sample to a loud sample so that I get the harmonic changes that occur when a horn player does the same. Is it possible to assign velocity to a modulation control that will be variable on one note?

Ok - firstly, you have to realise that you are working within the limitations of samples.
It's no good that a real instrument can be wildly expressive during the course of a played note when played by a skilled player, but you only have a sample of a flat, static note available in your DAW.
However, what you can do in your example is set up a MIDI controller to crossfade between sample layers during the course of a note in the EXS24, using the modulation matrix. For example, you can set "Sample select" as a mod destination, with "Controller #1" as a source - now your mod wheel will select the sample layers.
You might need to go in an edit the instrument itself to get the setup you want, depending on how the source instrument is programmed.
From the EXS24 manual, for instance, it says this for sample select:
"Modulates the sample (zone) that is played.
By default, Sample Select is controlled by velocity—through the default Velocity to Sample Select modulation routing. This means that the received note velocity value determines which of the layered zones (in different velocity ranges) is heard as you play the keyboard softer or harder.
You aren’t limited to using velocity, however, to determine which sample is played. You could assign the modulation wheel source to the Sample Select destination, or use both velocity and the modulation wheel.
If you choose a continuous controller such as the modulation wheel, you can step through the velocity layers during playback. In this case, make use of the crossfade (Xfade) parameters to create smooth transitions between velocity split points.
When using multiple modulation sources, be aware that these can cause all velocity layers to run simultaneously—using up as many voices as there are layered zones. The CPU usage will increase accordingly."

Charting Over Time

I'd like to create a form that a person might submit several times over the course of a year. It doesn't appear there is an option in the summary report to create a chart over time (like a line chart tracking the values of an answer over several dates).
I realize I could export to Excel and create a chart, but my goal would be able to have a summary report for people who don't know how to create charts in Excel.
We use different forms for our Veterinary Practice. We'd like to create a form for clients who have pets in declining health or have a particular issue we are tracking. The client would go to the form, enter their last name and pets name (we can filter the reports easily that way), and then enter numeric rating values for things like "mobility" or "appetite." Over the course of days, weeks, or months, it would be great to see a chart that displays the change in values over time to notice downward or upward trends in health.
I know there are probably other ways to do this outside of FormsCentral, but I'm trying to keep things simple (especially for non-technical folks who may need to retrieve data).
Any other suggestions outside of FormsCentral would also be welcomed, but I'm wondering (from staff) if there are any plans to expand some of the summary reporting/charting capabilities?
Thanks,
Ryan

Currently the reporting ability you seek are not supported in Formscentral. As you have noted your best option is to do this work in something like Excel.
Andrew

Face recognition over time

How does Faces deal with change of appearance over time? Am I confusing it by asking it to recognize our children as they grew up over 30 years? And when my friend grew a beard?

Very good question!
I have about 12,000 family photos going back from 1850 to the present day. Some ancestors/descendants look like each other, most don't!
But this makes some of the suggestions from Faces quite amusing: is my granddaughter the same as her great great aunt?!
One of my grandsons is a total clone of his father, and pictures of them at the same age confuses Faces no end!
But the more photos you identify, the better Faces works, but you won't confuse it, Faces will often confuse you!

I just changed my phone number over an hour ago

Hello,
Looking for any help. I just changed my phone number over an hour ago. I called the *228 and that was successful, then I powered on and off my phone 5 times so far and still nothing. I can call and it goes to voicemail, but my phone doesn't ring. Any help would be greatly appreciated.

jaysmerritt wrote:
I just changed my phone number and now when i try to make a call, i get a message that says "We are unable to authenticate this device." Can anyone tell me what to do?
Call Verizon Customer Service from another phone that works and they will help you with that problem.
Should be simple to do. Or go into a Verizon Wireless Company Store and NOT a RE SELLER you can locate one via calling Verizon Wireless Direct and their tech support should also be able to set it up properly as you wait.
Hope that helped?

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
Most commenst I see is abotu incoling calls, not outging.
Thanks.

No. You can't do this with any phone.

SSRS line chart showing premium change pct over time

Hi,
I have an SSRS report sitting over a cube. I'm building a Line chart to show premium change over time by producer (there are currently 6 producers). I have the Producer Name, Quarter/Year, and Premium amt.
I want to have the premium line trend based on the percentage of change from Quarter to Quarter. Quarter will be the X-Axis and percentage will be the Y axis. The premium for the first quarter should start at 100%. Each premium line for
the producer should then change up or down based on the change in premium per quarter. The end result should look something like this: Can this be done using SSRS?

Hi,
I have an SSRS report sitting over a cube. I'm building a Line chart to show premium change over time by producer (there are currently 6 producers). I have the Producer Name, Quarter/Year, and Premium amt.
I want to have the premium line trend based on the percentage of change from Quarter to Quarter. Quarter will be the X-Axis and percentage will be the Y axis. The premium for the first quarter should start at 100%. Each premium line for
the producer should then change up or down based on the change in premium per quarter. The end result should look something like this: Can this be done using SSRS?

I have downloaded mozilla firefox a number of times. Over a few days it tells me that the firefox is no longer on my computer. I never delete it. Please help. I do use CCLEANER.

I have downloaded mozilla firefox a number of times. Over a few days it tells me that the firefox is no longer on my computer. I never delete it. Please help. I do use CCLEANER. edit

You are unfortunately out of luck with an Intel Mac and OS X 10.4.11<br />
Best would be to update to OS X 10.5 or later if you want to use Firefox 4 and later versions (current is 8.0).<br />
There is a Firefox 8 compatible third-party version TenFourFox from www.floodgap.com for a PowerPC Mac, but no alternative for an Intel Mac with Mac OS X 10.4.
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/8.0/system-requirements/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Facetime is using my husband's cell phone number instead of mine? How can I change the number in face time?

Facetime is using my husband's cell phone number instead of mine. How can I change the number to mine in face time?

You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
That way you can quickly log in to your own account - then back to his.
You should obviously have different passwords.

SCEP date range reports change over time

Not really sure how to title this, but here is the scenario. I have altered a canned report to run the first Monday of every month and dump a Word file w/links into a folder. The alteration of this report is simply changing the end date to be -30 from today.
So I am getting a 30 day report of all computers that were infected. The report runs and looks to be accurate based on alerting I have setup. The problem comes when I take this report and start to drill down into the data using the links in the report. Let's
say my report shows a virus name with an infection count of 3. I can click on 3 and see a list of PCs that were infected....well not so much. If between the time the PC was infected and the time I look at the report, any of the 3 PCs were cleaned of the infection,
then they will not show up in the drilldown. So if a single PC was cleaned...the count still shows 3, but clicking on 3 only shows 2 computers now. This pretty much goes for any data on the main page.
So essentially the report is pretty useless to go back in time and see detailed info on the incidents since the status of every bit of info in that report has changed over time. I am not a SQL person, but I did have one of SQL team look at the database and
she can't see anywhere that she can pull archived data from. Any idea what direction I can point her in to get the type of reports I am looking for?

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Why is there a limit on the number of times a "DVD player region" can be changed, and can it be adjusted for more region changes, or an indefinite number of region changes?

Why is there a limit on the number of times a "DVD player region" can be changed, and can this numbert be adjusted for more region changes, or an indefinite number of region changes?

Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

Change over time setup between operations

Hi,
1) In the Discrete MFG process, there 2 operations. In between there is a change over time or cleaning up time.
Where do we capture these change over or cleaning timings?
2) If i have 2 simultaneous operations, how do we handle them in routing?
Thanks,
Jey

Here are a few sites with various Motion tutorials:
http://www.motionsmarts.com/
http://applemotion.net/
http://www.kenstone.net/fcphomepage/fcp_homepageindex.html

Change of number over time

Similar Messages

Maybe you are looking for