Change physical tables?

I was importing 3 tables from Oracle 10g database and one table from access as dbf (all over ODBC based on windows XP)
This tables exist in physical part of Bussiness Inteligence 3 tables with primary keys in relations 1 to n, but tables from access dont have
pk, only one column some as one column from one tables from Oracle database, so I will try to make any references between
this two tables in Bussiness Model and mapping(both column are some datatypes ).
Can I modify any from phisical tables (access) if I make this relations in Bussines Model ?
regards,
Gordan

Your' s suggestion utterly anticipated ..

Similar Messages

  • Dynamic physical table name vs. Cache

    Hello, Experts!
    I'm facing quite an interesting problem. I have two physical tables with the same structure but with a different data. Requirement is to show same reports with one or another table. Idea is to have dynamically changed physical table name with session variable usage. Session variable can be change in UI so it was working until cache was turned on. When cache is turned on logical statements sent to OBI backend are the same even for different values of session variable that stores physical table name. Once cache is populated every users will get values from cache. This is possible source of discrepancy because some users might run reports with tableA values and some with tableB values.
    Are there any options to set OBI to use data related to proper physical table name (i.e. accordingly to session variable value)? Model clone is not an option because it will be way to hard and complex to maintain both, beside same reports need to work sometimes with one table name and sometimes with other...
    PS. Cache is set to be common for all users.
    Lucas

    thank you, I've found another way to make it running. In fact there are two ways of doing it: filter LTS and have all data filtered from single table with session variable or use fragmentation content also with session variable.
    Now tricky part is to set variable from UI, currently I'm using issue raw sql: call NQSSetSessionValue( 'String SV_SIGNOFF=aaa;' ) but I have to figure out how to change session non system variable value without need of administrator user rights.
    There is GoURL method, but it's not working...
    2. Add In ORACLE_HOME/bifoundation/web/display/authenticationschemas.xml
    <RequestVariable source="url" type="informational" nameInSource="lang"
    biVariableName="NQ_SESSION.LOCALE" />
    inside the top <AuthenticationSchemaGroup> </AuthenticationSchemaGroup> tag

  • Oracle Data Modeler commit change seg physical table

    Hello,
    Sometimes when I record a data model, Oracle Data Modeler (SVN) given as outgoing a chage of segment of physical table , if you committees are to change, duplication of files in the physical model is produced. Later when you open the physical model gives errors that have duplicate files
    How you can correct this error? Why the segment change occurs?
    Thanks

    Hello,
    Versión 4.0.0.833.
    No pattern is occasionally when shooting in the data model. How you can correct this error? Why the segment change occurs?
    Thanks

  • "Select" Physical table as LTS for a Fact table

    Hi,
    I am very new to OBIEE, still in the learning phase.
    Scenario 1:
    I have a "Select" Physical table which is joined (inner join) to a Fact table in the Physical layer. I have other dimensions joined to this fact table.
    In BMM, I created a logical table for the fact table with 2 Logical Table Sources (the fact table & the select physical table). No errors in the consistency check.
    When I create an analysis with columns from the fact table and the select table, I don't see any data for the select table column.
    Scenario 2:
    In this scenario, I created an inner join between "Select" physical table and a Dimension table instead of the Fact table.
    In BMM, I created a logical table for the dimension table with 2 Logical Table Sources (the dimension table & the select physical table). No errors in the consistency check.
    When I create an analysis with columns from the dimension table and the select table, I see data for all the columns.
    What am I missing here? Why is it not working in first scenario?
    Any help is greatly appreciated.
    Thanks,
    SP

    Hi,
    If I understand your description correctly, then your materialized view skips some dimensions (infrequent ones). However, when you reference these skipped dimensions in filters, the queries are hitting the materialized view and failing as these values do not exist. In this case, you could resolve it as follows
    1. Create dimensional hierarchies for all dimensions.
    2. In the fact table's logical sources set the content tabs properly. (Yes, I think this is it).
    When you skipped some dimensions, the grain of the new fact source (the materialized view in this case) is changed. For example:
    Say a fact is available with the keys for Product, Customer, Promotion dimensions. The grain for this is Product * Customer * Promotion
    Say another fact is available with the keys for Product, Customer. The grain for this is Product * Customer (In fact, I would say it is Product * Customer * Promotion Total).
    So in the second case, the grain of the table is changed. So setting appropriate content levels for these sources would automatically switch the sources.
    So, I request you to try these settings and let me know if it works.
    Thank you,
    Dhar

  • Logical table with data restrictions from the physical table

    Hello, I have a question about the relationships between the Logical Tables in Business Model and Mapping and The Physical table in the physical layer. The problem is the next one:
    I have a Physical Table named T1 that contains the attributes: Id, DateChangeState, State,…
    T1
    DateChangeState| ID |State     | Other columns….
    01/01/2011 | 1 | 03 |     …
    02/01/2011 | 1 |     11 |     …
    03/01/2011 | 1 |     02 |     …
    02/02/2011 | 2 |     01 |     …
    03/02/2011 | 2 |     02 |     …
    I need filter this table and extract only one row per ID. The row that I need is the row who contains the Max(DateChangeState) per ID. I don’t know how extract only the rows selected from the physical table to the Logical Table.
    I need that the logical table contains the next rows:
    T1_Logical
    DateChangeState |ID |     State     Other columns….
    03/01/2011 | 1 | 02 |     …
    03/02/2011 | 2 | 02 |     …
    How can I extract only the rows with the Max(DateChangeState) grouped by ID in the BMM?
    I thought put this condition in the column mapping (CASE WHEN DateChangeState=Max(DateChangeState)) but the Max(DateChangeState) was not grouped by ID.
    Any idea about how solve this problem?
    I can not use the group by in the answer and I can not change the physical layer.
    Thank you,
    Best Regards.

    Hi Rajeevagrl your solution is very good but I dont´t know why obiee is applying twice the max condition, The select is the next one:
    select distinct D1.c1 as c1,
    D1.c2 as c2,
    D1.c1 as c3
    from
    (select D1.c1 as c1,
    D1.c2 as c2
    from
    (select D1.c1 as c1,
    D1.c2 as c2,
    max(D1.c3) over () as c3
    from
    (select T379.ID as c1,
    T379.DATE as c2,
    max(T379.DATE) as c3
    from
    T1 T379
    group by T379.ID, T379.DATE
    ) D1
    ) D1
    where ( D1.c2 = D1.c3 )
    ) D1
    order by c2
    Edited by: 848497 on 14-abr-2011 3:58

  • Dimension on Aliased Physical Table

    Hi,
    Simplified example of my problem.
    I have two tables; -
    journals
    balances
    Both of these are the fact tables connected various dimension tables.
    One of these is code combinations, which has cost centres, expense types etc. This is used by both fact folders, by means of aliasing the physical table to pull it into the latterly created of the two business areas for balances.
    This works fine, until I try to create a dimension against the code combination folder.
    Then I get -
    ERRORS:
    BUSINESS MODEL Balances:
    [nQSError: 15001] Could not load navigation space for subject area Balances.
    [nQSError: 15019] Table Code Combinations is functionally dependent upon level Cost Centre, but a more detailed child level has associated columns from that same table or a more detailed table.
    n.b. I do not want to run reports against multiple FACTS but as soon as I create a dimension on the aliased physical table the dimension points at the original physical table as its source - which I cannot change - and not its aliased version which is my desired action.
    Anyone tell me where I am going wrong please??? (the dimension is large, I do not want to have to create multiple copies of the data in the underlying data warehouse)
    thanks,
    Robert.

    Hi angel,
    If i got your question right,
    > I create a dimension on the aliased physical table the dimension points at the original physical table as its source ,and not its aliased version which is my desired action.
    Definately it would point to the original table when you refer it as its source is that.
    An idea can you partition the code combination table into 2 that is cost centres as one single table and expense type as 1 single table .So that way u can create dimension on the one desired.
    Cheers,
    KK

  • Can we change physical SQL generated by BI Server?

    Hello gurus:
    I have a doubt. How can we change the physical SQL generated by OBIEE?
    is there any way we can modify the SQL Cost?
    Let me know.
    Thanks.
    Vinay R.

    So If I have a View and a physical table, so View will have lower cost compared to Table?
    Can you explain a bit more about this?There is absolutely no way we can estimate the cost of a view or a table we don't know. There are too many variables so your question is too wide and unprecise. Generally speaking views that select from only one table do not add any extra cost to the execution plan, Oracle will convert them to the underlaying table. Having said the usual reason to have a view is to join different tables and apply some data filtering conditions so it will depend a lot on what kind of query you are running.

  • Using case when statement in the select query to create physical table

    Hello,
    I have a requirement where in I have to execute a case when statement with a session variable while creating a physical table using a select query. let me explain with an example.
    I have a physical table based on a select table with one column.
    SELECT 'VALUEOF(NQ_SESSION.NAME_PARAMETER)' AS NAME_PARAMETER FROM DUAL. Let me call this table as the NAME_PARAMETER table.
    I also have a customer table.
    In my dashboard that has two pages, Page 1 contains a table with the customer table with column navigation to my second dashboard page.
    In my second dashboard page I created a dashboard report based on NAME_PARAMETER table and a prompt based on customer table that sets the NAME_ PARAMETER request variable.
    EXECUTION
    When i click on a particular customer, the prompt sets the variable NAME_PARAMETER and the NAME_PARAMETER table shows the appropriate customer.
    everything works as expected. YE!!
    Now i created another table called NAME_PARAMETER1 with a little modification to the earlier table. the query is as follows.
    SELECT CASE WHEN 'VALUEOF(NQ_SESSION.NAME_PARAMETER)'='Customer 1' THEN 'TEST_MART1' ELSE TEST_MART2' END AS NAME_PARAMETER
    FROM DUAL
    Now I pull in this table into the second dashboard page along with the NAME_PARAMETER table report.
    surprisingly, NAME_PARAMETER table report executes as is, but the other report based on the NAME_PARAMETER1 table fails with the following error.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1756 message: [Oracle][ODBC][Ora]ORA-01756: quoted string not properly terminated. [nQSError: 16014] SQL statement preparation failed. (HY000)
    SQL Issued: SET VARIABLE NAME_PARAMETER='Novartis';SELECT NAME_PARAMETER.NAME_PARAMETER saw_0 FROM POC_ONE_DOT_TWO ORDER BY saw_0
    If anyone has any explanation to this error and how we can achieve the same, please help.
    Thanks.

    Hello,
    Updates :) sorry.. the error was a stupid one.. I resolved and I got stuck at my next step.
    I am creating a physical table using a select query. But I am trying to obtain the name of the table dynamically.
    Here is what I am trying to do. the select query of the physical table is as follows.
    SELECT CUSTOMER_ID AS CUSTOMER_ID, CUSTOMER_NAME AS CUSTOMER_NAME FROM 'VALUEOF(NQ_SESSION.SCHEMA_NAME)'.CUSTOMER.
    The idea behind this is to obtain the data from the same table from different schemas dynamically based on what a session variable. Please let me know if there is a way to achieve this, if not please let me know if this can be achieved in any other method in OBIEE.
    Thanks.

  • Using multiple physical tables in a single logical dimension table

    I have two physical tables that are related on a 1 to 1 basis based on a natural key. One of these tables is already part of my RPD file (actually, it is the W_EMPLOYEE_D from the Oracle BI Applications). The second table contains additional employee attributes from a custom table added to the data warehouse. Unfortunately, I don't seem to be able to display ANY data from this newly added custom table! I'm running on OBIEE 11.1.1.6.
    Here's what I've tried to do. Lets call the original table E1 and the new one E2. E1 is part of the repository already, and has functioned perfectly for years.
    - In my physical model, I have imported E2 and defined the join between E1 and E2.
    - In my logical table for E1, I've mapped E2 to E1 (E2 appears as a source), set up an INNER JOIN in the joins section for E1 and added the attributes from E2 in the folder
    - In the SOURCES for this logical table, I've set the logical level of the content for E2 appropriately (detail level, same as E1)
    - In my presentation folder for E1, I've copied in the attributes from E2 that were included in my logical table
    Consistency check runs smoothly, no warnings or errors. Note: E2 contains hundreds of rows, all of which have matching records in E1.
    Now, when I create an analysis that includes only an attribute sourced from E2, I get a single row returned, with a NULL value. If I create an analysis that includes one attrribute from E1 and one from E2, I get all the valid E1 records with data showing, but with NULL for the E2 attributes. Remember, I have an inner join, which means that the query is "seeing" E2 data, it is just choosing not to show it to me! Additionally, I can grab the query from the NQQuery.log file - when I run this SQL in SQL*Developer, I get PERFECT results - both E1 and E2 attributes show up in the SQL - the query engine is generating valid SQL. The log file does not indicate there are any errors either; it does show the correct number of rows being added to cache. If I create a report that includes attributes from E1, E2 and associated fact metrics I get similar results. The reports seem to run fine, but all my E2 attributes are NULL in Answers. I've verified basics, like data types, etc. and when I "Query Related Objects" in the repository, everything looks consistent across all 3 layers and all objects. E2 is located in the same (Oracle) database and schema as E1, and there are no security constraints in effect.
    I've experimented with a lot of different things without success, but I expected that the above configuration should have worked. Note that I cannot set up E2 as a new separate dimension, as it does not contain the key value used to join to the facts, nor do the facts contain the natural key that is in both E1 and E2.
    Sorry for the long post - just trying to head off some of the questions you might have.
    Any ideas welcomed! Many thanks!
    Eric

    Hi Eric,
    I would like you to re-check on the content level settings here as they are the primary causes of this kind of behavior. You could notice that the same information might have written down in the logical plan of the query too.
    Also, as per your description
    "In the SOURCES for this logical table, I've set the logical level of the content for E2 appropriately (detail level, same as E1)"
    I would like to check on this point again, as if you had mapped E2 to E1 in the same logical source with an inner join, you would get to set the content level at E1 levels themselves but not E2 (Now, that E2 would become a part of the E1 hierarchy too). This might be the reason, the BI Server is choosing to elimiate(null) the values from E2 too (even you could see them in the sql client)
    Hope this helps.
    Thank you,
    Dhar

  • Need suggestion to get data from change log table of ODS.

    Hello,
    There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
    Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
    While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
    Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
    I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
    Please let me know if you have any suggestions.
    Regards,
    Sanjay Chaurasia.

    Hi,
    You can use the changelog table of the DSO.
    Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
    In the update rule Routine, give the tech name of Change log table instead of Active table name.
    Hope it helps.
    Krishna

  • OBIEE generated SQL differs if it's a Physical Table or Select Table...

    Hi!
    I have some tables defined in the Physical Layer, which some are Physical Tables and others are OBIEE "views" (tables created with a Select clause).
    My problem is that the difference in the generated SQL for the same table, differs (as expected) whether it is a Physical Table or a "Select Table". And this difference originates problems in the returned data. When it a Physical Table, the final report returns the correct data, but when it is a Select Table it returns incorrect/incomplete data. The report joins this table with another table from a different Database (it is a join between Sybase IQ and SQL Server).
    This is the generated SQL in the log:
    -- Physical Table generated SQL
    select T182880."sbl_cust_acct_row_id" as c1,
    T182880."sbl_cust_acct_ext_key" as c2,
    T182880."sbl_cust_source_sys" as c3
    from
    "SGC_X_KEY_ACCOUNT" T182880
    order by c2, c3
    -- "Select Table" generated SQL
    select
         sbl_cust_acct_ext_key,
         ltrim(rtrim(sbl_cust_source_sys)) as sbl_cust_source_sys,
         sbl_cust_acct_row_id,
         sbl_cust_acct_camp_contact_row_id,
         ods_date,
         ods_batch_no,
         ods_timestamp
    from dbo.SGC_X_KEY_ACCOUNT
    As you may notice, the main difference is the use of Aliases (which I think that it has no influence in the report result) and the use of "Order By" (which I start to think that it its the main cause to return the correct data).
    Don't forget that OBIEE server is joining the data from this table, with data from another table from a differente database. Therefore, the join is made in memory (OBIEE Engine). Maybe in the OBIEE Engine the Order by is essential to guarantee a correct join...but then again, I have some other tables in the Physical Layer that are defined as "Select" and the generated SQL uses the aliases and the Order by clause...
    In order to solve my problem, I had to transform the "Select Table" into a "Physical Table". The reason it was defined as a "Select Table" was because it had a restriction in the Where Clause (which I eliminated already, althouth the performance wil be worse).
    I'm confused. Help!
    Thanks.
    FPG

    Hi FPG,
    Not sure if this is a potential issue for you at all, but I know it caused me all kinds of headaches before I figured it out. Had to do with "Features" tab Values in the database object's settings in the Physical Layer:
    Different SQL generated for physical table query vs. view object query?
    Mine had to do with SQL from View objects not being submitted as I would expect, sounds like yours has more to do with "Order By"? I believe I remembered seeing some Order By and Group By settings in the "Features" list. You might make a copy of your RPD and experiement around with setting some of those if they aren't already selected and retesting your queries with the new DB settings.
    Jeremy

  • How to change the table's for an existing report

    Hello,
    How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
    I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
    Thanks,
    Abhishek

    In the Database Menu, there is an option Set Datasource Location.  This allows you to pick a table from the current tables used, and select a table to replace it with.  Press the Update button, and Crystal will swap one for the other.  If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
    May I suggest that your tables are set up improperly if you have to change report code to run it for different months?  The data should all be in one table with dates, and parameters to select the date range to report on.  (That was said in the spirit of helping...)
    HTH,
    Carl

  • How to find out the top ten Change log tables in BW

    I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
    Regards,
    Prashant M J

    Hi,
    Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
    If you wana see the requests in this change log use rstsodsrequest
    and if you wana see the size in terms of kb, mb DB02 or st04
    use the table name /bic* and click on tables and indexes option in history tab
    DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
    Thanks and regards
    Kiran

  • How to transfer data in change log table of dso to z-table using abap code

    Hi  can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

    PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
    report ZBW_DELTA_TO_GSTAR no standard page heading
                                     line-size 120
                                     line-count 75
                                     message-id ZBW_MSG_CLS.
    tables:   ZGIV_DLTA_EBV_BB,
              ZGIV_DLTA_EM2_BL,
              ZGIV_DLTA_EM2_BK.
    Selection Screen Definitions
    SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN: SKIP 1.
    PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                      EM2BL RADIOBUTTON GROUP ROLL,
                      EM2BK RADIOBUTTON GROUP ROLL.
    SELECTION-SCREEN: END OF BLOCK INNER.
    Data:  WS_UPDATE_FLAG  Type C,
           UCounter(9)      Type N,
           ICounter(9)      Type N.
    DATA:  T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
           s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
    DATA:  T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
           s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
    DATA:  T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
           s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
    Standard Internal Tables - Describe usage.
    data: begin of i_AEPSD_O0140 occurs 0.
            include structure /BIC/AEPSD_O0140.
    data: end of i_AEPSD_O0140.
    data: begin of i_AEPSD_O0240 occurs 0.
            include structure /BIC/AEPSD_O0240.
    data: end of i_AEPSD_O0240.
    data: begin of i_AEPSD_O0340 occurs 0.
            include structure /BIC/AEPSD_O0340.
    data: end of i_AEPSD_O0340.
    data: begin of i_GIV_DLTA_EBV_BB occurs 0.
            include structure ZGIV_DLTA_EBV_BB.
    data: end of i_GIV_DLTA_EBV_BB.
    data: begin of i_GIV_DLTA_EM2_BK occurs 0.
            include structure ZGIV_DLTA_EM2_BK.
    data: end of i_GIV_DLTA_EM2_BK.
    data: begin of i_GIV_DLTA_EM2_BL occurs 0.
            include structure ZGIV_DLTA_EM2_BL.
    data: end of i_GIV_DLTA_EM2_BL.
    Miscellaneous Program Variables and Constants.
    TOP-OF-PAGE
    top-of-page.
    START-OF-SELECTION
    start-of-selection.
      Clear: i_GIV_DLTA_EBV_BB,
             i_GIV_DLTA_EM2_BK,
             i_GIV_DLTA_EM2_BL,
             UCounter, ICounter.
      IF EBVBB = 'X'.
        PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
      ELSEIF EM2BK = 'X'.
        PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
      ELSE.
        PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
      ENDIF.
    FORM 100_EXTRACT_EBV_BB_DELTA_RECS
    FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
      Refresh:   i_AEPSD_O0140,
                 i_GIV_DLTA_EBV_BB.
      Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
      Select * From /BIC/AEPSD_O0140
        Into TABLE i_AEPSD_O0140.
      IF SY-Subrc = 0.
        LOOP AT i_AEPSD_O0140.
          MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
          MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
          INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
          IF SY-Subrc = 0.
            ICounter = ICounter + 1.
          ELSE.
            UPDATE ZGIV_DLTA_EBV_BB FROM  s_ZGIV_DLTA_EBV_BB.
            IF SY-Subrc = 0.
              UCounter = UCounter + 1.
            ELSE.
              Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
    FORM 100_EXTRACT_EM2_BK_DELTA_RECS
    FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
    Refresh:   i_AEPSD_O0240,
               i_GIV_DLTA_EM2_BK.
      Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
      Select * From /BIC/AEPSD_O0240
        Into TABLE i_AEPSD_O0240.
      IF SY-Subrc = 0.
        LOOP AT i_AEPSD_O0240.
          MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
          MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
            INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
          IF SY-Subrc = 0.
            ICounter = ICounter + 1.
          ELSE.
            UPDATE ZGIV_DLTA_EM2_BK FROM  s_ZGIV_DLTA_EM2_BK.
            IF SY-Subrc = 0.
              UCounter = UCounter + 1.
            ELSE.
              Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
    FORM 100_EXTRACT_EM2_BL_DELTA_RECS
    FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
    Refresh:   i_AEPSD_O0340,
               i_GIV_DLTA_EM2_BL.
      Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
      Select * From /BIC/AEPSD_O0340
        Into TABLE i_AEPSD_O0340.
      IF SY-Subrc = 0.
        LOOP AT i_AEPSD_O0340.
          MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
          MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
            INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
          IF SY-Subrc = 0.
            ICounter = ICounter + 1.
          ELSE.
            UPDATE ZGIV_DLTA_EM2_BL FROM  s_ZGIV_DLTA_EM2_BL.
            IF SY-Subrc = 0.
              UCounter = UCounter + 1.
            ELSE.
              Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
    END-OF-SELECTION
    end-of-selection.
      perform D1000_REPORT_DATA.
    D1000_REPORT_DATA
    form D1000_REPORT_DATA.
    *Display the title of the program
      write: /25 SY-TITLE.
      skip.
    Diaplay the details of the user and time
      write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
      38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
      skip 2.
      write: /  'Delta Records have been extracted  ',
             /   'Updates : ', UCounter,
             /   'Inserts : ', ICounter.
      skip.
      skip 3.
      write: /20 'End of the report'.
    endform.                                           "D1000_REPORT_DATA
    chgeck it out this also may hep you

  • OBIEE 10g repository - Business model - logical table to physical table, column mapping is empty

    Hi, I am really new to OBIEE 10g.
    I already set up a SQL Server 2005 database in Physical and import a view vw_Dim_retail_branch.
    The view has 3 columns: branch_id, branch_code, branch_desc.
    Now I want to set up the Business model to map this physical table (view).
    I created a new Business model
    Added new logical table Dim_retail_branch
    In the sources, added the vw_Dim_retail_branch as source table.
    But in the Logical table source window,  column mapping tab, it's blank. I thought it should be able to identify all the columns from vw_Dim_retail_branch, but not. The show mapped columns is ticked.
    What should I do here? Manually type each column?

    HI,
    Just you can drag and drop the columns from physical layer to BMM layer.
    Select the 3 columns and drag and drop it to the created logical column in BMM layer.
    for more reference : http:\\mkashu.blogspot.com
    Regards,
    VG

Maybe you are looking for