Change pointer activation.

Dear Professional,
I have one requrement like i want to push Material (matnr) change data to third party system. for every 1hr .
Kindly guide me i should go change pointer for Matnr , Qty and Meins. for that shall i read BDCP(Change Pointer table )
table or may be other way for that for changing material(Article) data frequenty.
Regard
DK Sahu.

hi,
for change pointer
1) in BD50 check the checkbox for MATMAS
2)got to BD61 and check the checkbox if not checked
3) if u want for particular fields then go to BD52 give message type MATMAS and check ur fields exits or not in that if does not exist then make a new entries of those fields.
Try this out...

Similar Messages

BDCP Change Pointer Activation Time

When a Change Pointer is written (BDCP) it appears that the Activation Time (ACTTIME) and the Creation Time (CRETIME) are the same. Is there any way to change the Activation Time when the Change Pointer is written?
We have the need to fire Idocs MATMAS, BOMMAT, DOCMAS, and CLFMAS to an external system. The objects in these IDocs are tied to ECM (Engineering Change Management). The ECMs have an effective date. The requirement is to fire the Idoc ONLY when the ECM effective date arrives. For example, a BOM change is made today but is not effective until next Friday - in this case the idoc should not fire until next Friday.
I have built a solution based on copying the respective Idoc FMs and modifying the change pointer process to look at the ECM and determine if the Effective date is <= today - if so, proceed - if not, skip. However it would seem that adjusting the Activation Time of the change pointer would be cleaner and not require changing a bunch of FMs.

Please,
Consider the question as closed.

Vendor Master IDOC (CREMAS) and change pointer activation..

Hi Guys..
I am using CREMAS idoc to transfer Vendor Master data to 3rd party system..
I configure the change pointer in SALE..
BDCP
BD61
BD50
BD52
But when I make changes in vendor master.. its not creating the idoc immediately.. I have to run RBDMIDOC manually.. to create the idoc..
How to make it create immediately.. ?
Also if I make a change in Email.. its not creating idoc at all.. !
Thanks for Ur time..

posting it in data transfer forum..

Sort of Change Pointer on CRM

Hi all,
I want to send difference value of master and transaction data like ALE Change pointer from CRM to Customer system.
Can you tell us available function ?
The IDoc sending mechanism of CRM is different from ALE of R/3. CRM creates Change document. I activated the Change pointer using BD61 and BD50 for message type of CRM(BP). But CRM doesn't create Change pointer record after creating Change document.
And CRM doesn't have any selective IDoc creating function like BD10. IDoc is created after BDoc process on CRM.
Is SMD(ALE Change pointer) not available on CRM ?
Thanks,
Keiko

Hi Keiko!
I don't have access to a CRM system, but you can test your customizing yourself:
Go to transaction SE37, test function CHANGE_POINTERS_CREATE_DIRECT. Here you fill in your message type and some (random) values for the pointer in table T_CP_DATA.
There are no syntax checks, just change pointer activation is checked in the function module. See, if an (artificial) CP is created.
If this is working, go on to function CHANGE_POINTERS_CREATE. Fill in existing change document data, run a test.
In case no change pointers are created, you can debug these rather small (compared to the 'real' transactions) functions to identify missing / wrong customizing.
If change pointers can be created, but your transaction still does not create change pointers, then your problem might be the CRM system.
Regards,
Christian

Idoc without activating change pointer

what is the alternative way of without activating the change pointer in bd61,bd50 and bd52 in idoc creation??
i mean there is a way of doing code instead of that. can anybody gv me that <b>sample code</b>...
thanx in advance...

Hi Biswajit,
Please check this link which will show you step by step on how to configure creation of IDoc (inbound and outbound).
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Hope this will help to start with.
Regards,
Ferry Lianto
Please reward points if helpful.

Widespread activating of change pointer

Hello,
i want to activate widespread activating of change pointer. can you please let me know how to do it?
Regds,
udupi
Moderator message : Not enough re-search before posting. Thread locked.
Edited by: Vinod Kumar on Aug 2, 2011 12:14 PM

Hi Kalyan,
For this, Periodic publication of planning results needs to be set in the customisation settings.
Please refer the below link
http://help.sap.com/saphelp_scm70/helpdata/EN/13/da77377fae0261e10000009b38f842/frameset.htm
Regards
R. Senthil Mareeswaran.

Change pointer for functional location- deletion flag & activation status

Hello,
Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
I found that those two are stored in:
table     field
TAPL     LOEKZ
TAPL     PARKZ
The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
Thanks in advance.

Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
rgds.

Issue with the change pointer for the reduced message type ZMATMAS

Hi All,
I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE) are not getting fill with the values. They are always filling with the values '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
1.     Create reduction maintenance ZMATMAS (Tcode BD53)
keep the default selected segments E1MARAM, E1MAKTM
2.     Add following data to maintain table view for the message type ZMATMAS (Tcode BD52)
Object      Table Name     Field Name
MATERIAL       MARA      KEY
MATERIAL     MARA     LAENG
MATERIAL     MARA     BREIT
MATERIAL     MARA     HOEHE
3.     Activate particular change pointer in BD50
Message Type       Active
ZMATMAS         yes
4.     Activate change pointers u2013 Generally (Tcode BD61).
5.     Assign Segment fields to change document fields (Tcode BD66 )
Segment Type     Field Name     Object     Table Name     Field Name
E1MARAM     BREIT     MATERIAL     MARA     BREIT
E1MARAM     HOEHE     MATERIAL     MARA     HOEHE
E1MARAM     LAENG     MATERIAL     MARA     LAENG
6. I have done the distribution model settings (BD64) and the idoc configurations
1.     Logical System
2.     RFC destination
3.     Create port
4.     Create partner profile
7. I changed the fields in material master data(Tcode MM02) and I executed the Tcode BD21.
Idoc is generated but the fields are not getting fill with the values
(Note: some fields are filled with values e. g material number, material description)
I checked the Idoc data segment E1MARAM (WE02)
Fld name   Fld cont.
LAENG       /
BREIT       /
HOEHE      /
Can you please let me know the issue
Prad

Issue is solved when I select the segments and the fields in the segments (Tcode :BD53)
Prad

ALE change pointer error - master data

Hi friends,
While loading master data (customer,material and order number) all delta,we faced the error "ALE change pointers are not set correctly".
In the discussions posted earlier,it was said that the change pointer in BD61 activation would solve the issue.
If i do that now,whether my other delta loads will be affected or it doesnt have any relation to my other transactional deltas.Pls clarify me.
Also explain me the reason fot this error.
Thanks & Regards
Ragu

thanks ajay for your input
regards
ragu

Can I Programmatically Change the Active Group on a Hypertrend in DSC?

I would like to know how to programmatically change the active group of a hypertrend in Labview DSC. I saw a link which said it can be done in Lookout. But in the DSC module, the active group is read only.
I know of a hard way to do it. I could save the hypertrend settings as xmlSettings to a temporary file. The active group is one of the settings. I could then change the active group in this text file to point to the new group and then reload the settings. But this is not a clean way of dong it.
Anyone know if there is a easy way?
Solved!
Go to Solution.

I found a way to do it but its not very clean. I dont know why there is not a function to change the current group.
Here is how I did it.

Change the active microphone in AS3

Is there a way to change the active microphone in AS3 without using the SecurityPanel.MICROPHONE? All of my attempts stop all microphone activity, even if triggered by a button click.
Using
var mic:Microphone = Microphone.getMicrophone();
works fine, them if at a later point I do
mic = Microphone.getMicrophone(newIndex);
and poll mic.activityLevel - the level is always -1.
If I switch back to the original mic, it works again, which ever was originally selected in the security panel works. This is with two working mics, and I have switched which is selected via the security panel to make sure it is not mic specific.
Is this a security risk and not allowed? Once you initialize one mic, is that what you are stuck with? I have switched cameras in air, but that was air.
- as a side note, the reason for needing this is we get feedback whenever a user is using the computer speakers and is on firefox. I have set loopback to false and I have brought the SoundMixer level down to 0, but as soon as the security panel microphone window pops up, the level comes up and loopback acts as if it was set to true. When the window closes, I get control again.

Figured it out. It looks as though the Microphone.activityLevel is -1 until you add a SampleDataEvent listener. You do not need to add this if you are streaming to the server. In my tests I was updating my reference to the mic for checking the activityLevel in an update loop. I did not update the SampleDataEvent lsitenre since I was not actaully recording, just checking the mic input level, and did not think it needed tobe in place.
It seams possible that the Microphone checks that it either has a SampleDataEvent listener, or is connected to a server before updating activityLevel, I just have never seen that kind of thing done.
I am not certain this is the case, but it is what it looks like. If anyone has more infomation, please share.

ALE/Change Pointer Configuration for ZSEGMENTS

Hello all,
I have been searching for a few days now trying to obtain my requirement with extending of an idoc. I am working with the following:
Message Type: HRMD_A
BASIC Type: HRMD_A06
Extension: ZHRMDA06
I extended the idoc because I wanted to include 2 extra infotypes which are not on that idoc. Infotypes 77 and 709.
Here is what I have completed so far.
WE30...Created ZSEGMENTS to include below.
WE31...Extended the HRMD_A idoc to include the ZSEGMENTS defined below.
WE82...Updated the output types and assignments to idoc.
BD61...Activate Change Pointers
BD50...Activated change pointer for HRMD_A.
I change the address field in infotype 0006.
Run the BD21...idoc is generated with the changes to address, everything looks good.
Do the same thing for the ethnic origin on infotype 77, no idoc is generated.
I turned on logging onto table PA0077.
I am evaluating the change logs via SCU3, and I am seeing my changes on the field.
What I have tried...
I have tried creating a object in t-code SCDO (ZTEST)
I have associated ZTEST with table/field PA0077-RACKY.
Tried running BD21...No iDoc generated.
I have been researching for a few days and it feels that this should be able to be done through configuration and not custom coding. Am I wrong to think that?
Has anyone ever did anything like this before which they can point to documentation or even the appropriate search criteria on the SCN forums.
Thanks in advance for your help!
Jason

Hi Jason,
I believe you have to enter the fields that trigger the changing pointer in tcode BD52. In my case these are the fields for BOM:
Regards,
Custodio

HRMD_ABA change pointer trigger not work for info type changes

Hi,
In change pointer for message type HRMD_ABA Certain changes to HR records like adding activity types to infotype 315, changing dates to infotype 0001, 0105 and 315 and adding/changing/deleting are not woking through change pointers.
We are are replicating those changes through RHALEINI program, so can anyone let me know how to customize in case of adding this info types to trigger automatically through change pointers.
Thanks,
Marai

Hi,
Then check for change document created or not, if created then use SWEC to link it

What is change pointer in ALE ?

Dear Guru,
1. What is change pointer in ALE and how to configure it ?
The process of configure please guide me !
Tanks and Regards,
Subash.

Hi,
Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
ALE provides powerful capabilities to capture changes occurring to master data and to distribute them via the IDOC interface. This feature can be used to keep two or more systems synchronized with respect to master data.
Steps to configure change Pointers:
1.Activate the change pointers globally(BD61)
2.Activate the change pointers for individual message types(BD50)
3.Schedule the program RBDMIDOC to run periodically on the sending system.
To Delete Change pointers use transaction BD22 and the standard program is RBDCPCLR
Remember You can see a check box in Further characteristics tab of the data element ( se11>enter data element>Further characteristics tab) for change document.
This check box is to bo checked to trigger change pointers.
please check out the following link for more information it might help you
http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm
http://help.sap.com/saphelp_470/helpdata/en/dc/eb683c00e8a646e10000000a11402f/frameset.htm
Regards,
Satish

ALE Change pointer setup for master

Hello everyone,
When I am extracting data from R/3 some of the changes are not getting extracted. I want to check if all the proper Message types are turned on or not. What is the best way to do that?
I am extracting 0cust_sales.
thanks

It is activated there, I checked. Thats like a master switch which controls change pointers for all message types.
But dont I also have to turn on change pointer for each message type ?
I am refering to customizing in R/3
SAP Netweaver-> SAP Web Application Server -> IDoc Interface / Application Link Enabling (ALE)->Modelling and Implementing Business Processes->Master Data Distribution->Replication of Modified Data->Activate Change Pointers for Message Types
Thanks

Change pointer activation.

Similar Messages

Maybe you are looking for