Sort of Change Pointer on CRM

Hi all,
I want to send difference value of master and transaction data like ALE Change pointer from CRM to Customer system.
Can you tell us available function ?
The IDoc sending mechanism of CRM is different from ALE of R/3. CRM creates Change document. I activated the Change pointer using BD61 and BD50 for message type of CRM(BP). But CRM doesn't create Change pointer record after creating Change document.
And CRM doesn't have any selective IDoc creating function like BD10. IDoc is created after BDoc process on CRM.
Is SMD(ALE Change pointer) not available on CRM ?
Thanks,
Keiko

Hi Keiko!
I don't have access to a CRM system, but you can test your customizing yourself:
Go to transaction SE37, test function CHANGE_POINTERS_CREATE_DIRECT. Here you fill in your message type and some (random) values for the pointer in table T_CP_DATA.
There are no syntax checks, just change pointer activation is checked in the function module. See, if an (artificial) CP is created.
If this is working, go on to function CHANGE_POINTERS_CREATE. Fill in existing change document data, run a test.
In case no change pointers are created, you can debug these rather small (compared to the 'real' transactions) functions to identify missing / wrong customizing.
If change pointers can be created, but your transaction still does not create change pointers, then your problem might be the CRM system.
Regards,
Christian

Similar Messages

  • CREMDM Change pointer query

    Hi Experts,
        I need to send a idoc for message type CREMDM. My requirement is whenever a OA vendor is changed i need to find the main vendor and trigger the idoc  for the main vendor. Whenever I make changes in the vendor they are getting stored in BDCP2 table with message type CREMAS. Since its getting stored with message type CREMAS the changes are not read for message type CREMDM.
        Is there any different change pointer approach need to be carrried for this message type CREMDM.
    Regards
    Sridevi S

    hi Sridevi,
    Try to make all sort of changes to fields were u want change pointers.
    Changes will be recorded in CDHDR  from there u will get changes that u have made and also object Class
    take that object class and look in tcode SCDO  double click on text of respective object class u will get the names of table that will be effected by tahe object class .
    If u find u r table there goto BD52 with that object class and make entry.
    try it out..
    revert for further queries..

  • Change pointer for HR master data is not getting generated in table BDCP

    Hi,
    I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
    Can anyone assist me on how should i debug it.
    Thanks
    Sunil Singh

    Hi Shital,
    Thanks for your Reply.
    I am not able to find that path in SPRO
    Basic Functions-> application Area
    And Also My change pointer configuration was working properly and it suddenly stopped working.
    I mean to say all the required settings was done previously.
    Anyways kindly let me know how should i proceed.
    Thanks
    Sunil Singh

  • To create the follow up transaction automatically on status change in sap crm?

    To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

    Hi vishal,
    As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
    this is requirement of client.
    now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

  • How do I make a JTable's header sorting actually change the actual table?

    How do I make a JTable's header sorting actually change the actual table?
    Currently, I'm using
    table.setAutoCreateRowSorter(true);to allow the user to sort the table.
    However, I want to be able to load something based on the selected row's index. The problem is that when the table is rearranged, the change appears to only be local, in other words, the actual table isn't changing.
    For instance:
    index 0 "A"
    index 1 "B"
    index 2 "C"
    Sorted in reverse gives me
    "C"
    "B"
    "A"
    But C is still index 2 (instead of 0).
    Thanks in advance.

    Cross posted and answered in the Swing forum.
    [http://forums.sun.com/thread.jspa?threadID=5353865]
    I see this is not your first incidence of cross posting. In future, please post a question once only.
    db

  • After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum.  The relevant forums are as follows:
    InDesign - InDesign
    Illustrator - Illustrator

  • Suppress Non Changed Fields in change pointer triggered IDOC

    I have a requirement to clone message type MATMAS as ZMATMAS. This ZMATMAS is the message type I used to create change pointer triggering outbound idoc for change/create of materials.
    When i change a material, all fields are sent instead of the fields only changed(of course key fields should be sent as well). Is there a way via configuration that I can suppress fields which are not changed? Or do i need to clone FM MASTERIDOC_CREATE_SMD_MATMAS and suppress the fields via program
    Thanks in Advance!

    i'll clarify the requirement again.
    Let say i changed a field BRGEW in the material master.
    Currently, all the segements which contains BRGEW is sent, but these segements contains other data which are not changed in the material master.
    How do i suppress it?
    Thanks,

  • How to restrict the change access in CRM for OLTP orders

    Hi Guru's,
    Please let me know  how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
    We have  the orders that are  created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM  system is allowing change mode for ECC orders and ending up with errors.
    Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
    Regards
    Suneel

    Hi.
    You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
    Regards.

  • EXCHANGE_RATE with change pointer

    Hello Experts,
    I saw that there is no  option to define the message type EXCHANGE_RATE for change pointer
    My question is: how can I get a partial idoc when there is a change in the exchange rate?
    Is it possible?
    Thank you,
    Boaz

    Hi Jignesh,
    "It is ideal that we dont change the Exchange Rate at the time of POsting Invoice to accounts."
    How you have addressed the issue. could you explain.
    Thanks & Regards
    Sri

  • Issue with the change pointer  for the reduced message type ZMATMAS

    Hi All,
    I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE)  are not getting fill with the values. They are always filling with the values  '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
    1.     Create reduction maintenance ZMATMAS  (Tcode BD53)
    keep the default selected segments E1MARAM, E1MAKTM
    2.     Add following data to maintain table view for the message type ZMATMAS  (Tcode BD52)
    Object      Table Name     Field Name
    MATERIAL       MARA      KEY
    MATERIAL     MARA     LAENG
    MATERIAL     MARA     BREIT
    MATERIAL     MARA     HOEHE
    3.     Activate particular change pointer in BD50
    Message Type       Active
    ZMATMAS         yes
    4.     Activate change pointers u2013 Generally (Tcode BD61).
    5.     Assign Segment fields to change document fields (Tcode BD66 )
    Segment Type     Field Name     Object     Table Name     Field Name
    E1MARAM     BREIT     MATERIAL     MARA     BREIT
    E1MARAM     HOEHE     MATERIAL     MARA     HOEHE
    E1MARAM     LAENG     MATERIAL     MARA     LAENG
    6. I have done the distribution model settings (BD64) and  the idoc configurations
    1.     Logical System
    2.     RFC destination
    3.     Create port
    4.     Create partner profile
    7. I changed the fields in material master data(Tcode MM02)  and I executed the Tcode BD21.
    Idoc is generated but the fields are not getting fill with the values
    (Note: some fields  are filled with values e. g material number, material description)
    I checked the Idoc data segment E1MARAM (WE02)
    Fld name   Fld cont.
    LAENG       /
    BREIT       /
    HOEHE      /
    Can you please let me know the issue
    Prad

    Issue is solved when I select the segments and the fields in the segments (Tcode :BD53)
    Prad

  • ALE change pointer error - master data

    Hi friends,
    While loading master data (customer,material and order number) all delta,we faced the error "ALE change pointers are not set correctly".
    In the discussions posted earlier,it was said that the change pointer in BD61 activation would solve the issue.
    If i do that now,whether my other delta loads will be affected or it doesnt have any relation to my other transactional deltas.Pls clarify me.
    Also explain me the reason fot this error.
    Thanks & Regards
    Ragu

    thanks ajay for your input
    regards
    ragu

  • How to find - Customer Master IDoc was created Manually or by Change pointe

    Hi all,
    I have an IDoc(Customer master) number (which I have taken from the payload in SXMB_MONI).  I would like to know whether this has been created by a user manually(BD14) or by a change pointer.
    Please help.
    Cheers
    danus

    Hi Vardharajan,
        Yes I agree with you. What I mean by IDoc created by change pointer is - 'IDoc generated because a change(pointer) is tracked by the system', in other words, due to some change made to the data.
    As you know, the other option of creating IDoc is by BDxx transaction. This option is usually used to push (unchanged) data.
    So in essence, what I am interested to know is , has the IDoc been generated because someone made a change using say, VD02 / XD02 or pushed the data manually.
    Please do ask, if anything is not clear.
    cheers
    danus

  • Change pointer perfomance issue(bd22)

    Hi,
    we are using message type HRMD_A to transfer the employee change data using the program RBDMIDOC. we are checking two table BDCP n BDCPS, but because of large number of data we r facing a perfomance issue here. I read in one forum about transaction BD22 which deletes the change pointer from these tables, but is it safe to use? and also what is the obsolete change pointer?
    Thanks in advance for ur inputs.

    Hey,
    It is advisable to reorganize change pointer tables at regular intervals for better performance of programs accessing the BDCP* tables.
    BD22 is a standard report delivered by SAP and it is absolutely safe to run this report. It also has o test run option. You could always run the report in test mode to analyze the data the report had selected for deletion.
    Obsolete change pointers are those which have been created up to the specified date and time. In BD22, if this checkbox is marked, obsolete change pointers will be reorganized regardless of whether they have yet been processed.                                                           
    Processed change pointers are those which have been processed in the specified period (date and time). If this checkbox is marked, the processed change pointers are reorganized.                          
    -Kiran
    *Please mark useful answers

  • Idoc trigerring with change pointer under conditions

    Hello dear experts
    Could you please tell me how can i trigger an outbound idoc using the change pointer ( RBDMIDOC program)?
    I have to generate the ARTMAS outbound idoc ONLY when the material status which is the table MARA is set to a certain value.
    I can manage to trigger the outbound idoc but i did not manage to restrict this triggering according to the value of the material status fields.
    Thanks for all your answers.
    Best Regards.
    Yannick

    I tested using filter on Dist Wh and change pointers - for us, Dist Wh filter for material set on plant.  When we made change to matierial, only if change to plant was made, so plant was included in idoc segment, did the filter work.  If change material description, plant not on idoc segment so was sent .  Looking for alternative...

  • Activate change pointer for a new screen field in MM42/41

    Hi,
      I created a new screen field for Article master(MM41/42/43) under basic data. If there are changes made to this new field how will the system create a corresponding IDOC? does this have something to do with the change pointer thing?
    Thanks,
    Jeff

    Hi Jeffrey,
    first of all got transaction SALE :
    ALE
    -> Modeeling and Implementing
    -> Master Data Distribution
    -> Replication
    -> Activate Change Pointer generally
    Check if Changepointers are generally on.
    Then goto BD50 and activate change pointers fpr message type.
    Finally goto BD52 and check if your field is "watched".
    After that you can generate idocs from BD21.
    Hope it helps.

Maybe you are looking for

  • Trying to do a clean install on iBook G4 - Freezing

    I received a G4 iBook and want to do a clean install to erase the previous owner's hard drive and add all my own applications. When I put the disk in it asks me to use a password, which I have and the computer restarts. But just as the grey apple ico

  • Can't access my dvr from safari

    Hi, I have a problem with safari.  I can't access my dvr from the browser. After I sign in to my dvr webpage this message comes instead of loading java: The requested URL was not found on this server I have this message when I try with Mozilla: Cache

  • SELECT-OPTIONS can u use it to read internal table ?????

    Hello All,    I am trying to read an internal table with the select-options statement. I am getting a syntax error so i am hoping i am just coding it incorrectly. Can someone tell me what is wrong here is the if statement : if p_begdte in t_rpt-datab

  • How to use range for a field that is not in select options

    Dear All, I have a requirement to show Long Text of a G/L account , where G/L account is between a given range. But this field is not in select options. I have to show Long Text of this Account, if the field is in a given range. I have tried to use R

  • Pantone color issues while PDFing

    The company I work for designs/publishes a magazine and have just been upgraded from CS2 to CS4. Since then, I've started having some problems when I PDF or print an ad. I'll receive an ad as a PDF and a component of their ad will be a Pantone color