Change Process are not getting triggered

Hi,
I have changed the first name of the user in OIM but the same is not getting sycned in DSEE.
When I have added the Change First Name Process task from Resource then it got successfully completed and the user's first name got changed in DSEE.
Automatically Change First Name process task is not getting triggered. It worked for me earlier but now it is not working.
Could you please let me know the reason for the same.
Thanks

verify below
1. task name under DSEE process def and process trigger lookup is exactly same(remove if any white space etc.)
2. make sure the task is marked as conditional
3. Allow Multiple should be checked
--nayan

Similar Messages

Change Pointers are not getting populated in BDCPV table.

Hi All,
         I am trying to create IDOC for Activity type master - KL02 through change pointers. For that I have done following things.
Message type - COAMAS
1. Created Custom message type - WE81 - ZIN_COAMAS_TCSMOBILE
2. WE82 - Config for Mess Type and Idoc type combination
3. SCDO - Checked object type LSTAR and have required tables in that object.
4. BD61 - Activated Change pointers - Generally.
5. BD50 - Checked Active for ZIN_COAMAS_TCSMOBILE
6. BD52 - Added fields for I want to create Change pointers
7. BD60 - Message type and ref Mesage Type and function module config.
8. BD64 - Created distribution model for my Message type
After doing all this settings the change pointers are not getting created in BDCP and BDCPV tables.
Note - The entries are going in CDHDR and CDPOS table for activity which i change through KL02 for class LSTAR
Can anybody figure out what need to be done in this case?
Regards,
Gautam Joshi.

Hi All,
          Solved the problem myself.
          In BD52 I have given
          LSTAR               CSLA         KOARS
          LSTAR               CSLA         LSTAR
          LSTAR               CSLT          KTEXT
          Here the data of activity are stored in TCLA and TCLT tables. So intially while doing config in BD52 I have given TCLA and TCLT table names.
          But I debugged the KL02 and found that change pointers are not created for TCLA and TCLT table. further looking into CDHDr and CDPOS table I found that for COAMAS message type in these two tables table name was CSLAB.
CDPOS entry
LSTAR
3166442
119512890
*CSLAB*
2003166442   2400123120000101
KTEXT
U
--> BUT CSLAB is structure.
After putting these entry in BD52 the problem solved.
LSTAR     CSLAB     KOKRS
LSTAR     CSLAB     KTEXT
LSTAR     CSLAB     LSTAR
Regards,
Gautam Joshi.

In a metachain local chain are not getting triggered

Hi Experts,
I have a transaction metachain which includes 12 local chains. My query is some of the local chains are not triggering. Can anybody please help me in resolving this issue. <<removed>>
Regards
Sampada
Edited by: kishan P on Jan 10, 2012 5:10 PM

Hi ,
I dont see any reason why Process chain is not getting triggered . Just check the Metachain in change mode and activate it again .
Also please check display variant in all of the Local Process chains .It should be using metachain .
2. Can you please check the status of the Previous local Process chains and check the status of the same in tables RSPCPROCESSLOG , RSPCPROCESSCHAIN .The status should be successfully finished .
Hope it helps .
Thanks
Kamal

Job are not getting Triggered

Hi All,
I Have encountered an Issue with JOB not getting Triggered in BI system .
For Datasource 2LIS_04_P_ARBPL , I have created Infopackage , when I am going to schedule tab and running an Infopackage. Job is not getting trigger . And it is going on Hold for a longer period.
Data is in the source system and I am unable to fetch data from source system .
One more thing there was some upgration activity happened in the source system one day before.
Could u please let us know , Is the reason behind could be upgration in source system ?
Please let me know what needs to be crosschecked and what could be the solution for this Issue.
Looking for response .....
Regards,
Mahesh

Hi ,
In the Source system Data is fetching I mean through RSA3.
Even I able to replicate the Datasource as well.
Also in T-code : SM59 , when I am checking Source system Connection check , it is not poping any error.
But When I am Checking through RSA1 - > Source System
Source system connection by clicking CHECK Option then it is poping an error "Check Failed for RFC Connection ; Check Destination ".
Also In Source system T-code :SM50 I can see three BGD WP which are in waiting status.
In T-code : BD87 I have checked I didnt find any IDOC's in Yellow colour .
How do we need to check whether ALEREMOTE is active or not?
Actually my Issue is Jobs are not getting trigger in BI . So what all things needs to be taken care apart from this.
So Is there any thing to be taken care from Basis team for Restarting of BI Jobs after any kind of Upgration activity in general?
Regards,
Mahesh

Scheduled process chain not getting triggered properly

Hi all,
Process CHAIN, variant ZPC_MASTER_COMMON is not scheduled waiting for event RSPROCESS 3Y7V2S5WLYJ5VGT8IMCSG068H, after this message the job gets cancelled for any process chain when i schedule it as a periodic job.

Hi,
Please check if in the job you have 3Y7V2S5WLYJ5VGT8IMCSG068H entered as the event name. If yes, please change and activate again.
-Vikram

XI Alerts are not getting triggered with conditions

I could make Alerts work with all the filters with wildcards(*)-default. But I am not able to make with "Conditions " with restriction like:
Sender Service: PurchaseOrder
Sender Interface : *
Sender Namespace: *
It works fine if I have * for Sender Service and etc.
I am using 2004s PI 7.0 sp 9.0.
Please let me know if anybody had this Problem.
Thanks in advance.
Laxman Molugu

Hi,
Please do not use PurchaseOrder it means * only ,,
Please explain bit clear..
Why bcoz, if you have multiple senders the you can achieve this in different way,
suppose if you wolud like to get the name from database using diff tech like DBLookup or some machanism.. then do further process..
Regards
Chilla..

Workflow not getting triggered from Action definition in CRMD_ORDER

Hello Experts,
I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
Regds
VLP

Please check in SWI2_FREQ whether the Workflow is really getting triggered.
Thanks
Arghadip

Alerts not getting triggered from Adapter Framework

Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
<b>However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)</b>
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
<i> No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )</i>
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya

Plugin events not getting triggered

Hello,
APEX version 4.1.0.00.32 and 4.2.3.00.08
Browser: latest version of Chrome browser
I'm trying to include plugin events for the Select2 APEX plugin but facing one rather annoying issue; the dynamic actions based on the plugin events are not getting triggered. These are the steps I have taken:
1. Registered several events with the plugin (e.g. slctchange, slctopen, slcthighlight, etc.). These events are based on the official Select2 documentation.
2. Modified the render function to include event handlers that trigger the appropriate Select2 event.
$("' || l_item_jq || '").on("change", function(e) {
apex.jQuery(this).trigger("slctchange", { val:e.val, added:e.added, removed:e.removed });
$("' || l_item_jq || '").on("select2-opening", function(e) {
apex.jQuery(this).trigger("slctopening");
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$("' || l_item_jq || '").on("select2-highlight", function(e) {
apex.jQuery(this).trigger("slcthighlight", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-selecting", function(e) {
apex.jQuery(this).trigger("slctselecting", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-clearing", function(e) {
apex.jQuery(this).trigger("slctclearing");
$("' || l_item_jq || '").on("select2-removed", function(e) {
apex.jQuery(this).trigger("slctremoved", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-focus", function(e) {
apex.jQuery(this).trigger("slctfocus");
$("' || l_item_jq || '").on("select2-blur", function(e) {
apex.jQuery(this).trigger("slctblur");
I can confirm that the slctchange event (the first event in the list) is working properly both in APEX 4.1 and 4.2. Please note that I had to use apex.jQuery instead of $ to get it to work in 4.1. Might be because I overloaded jQuery in 4.1. Anyway, all others events are not getting triggered for some reason. The event handlers are getting executed for the appropriate event; that's not the problem. I guess the source of the problem lies with the trigger function. It simply doesn't trigger any of my dynamic actions.
To make things even more complicated, it is possible to trigger the events manually in console. So if I execute this statement:
apex.jQuery("#P20_SINGLE_VALUE_NEW").trigger("slctopen");
Then I get back the result from the dynamic action.
I tried a lot of different ways to trigger the plugin event. For example:
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$(this).trigger("slctopen");
apex.jQuery(this).trigger("slctopen.BE_CTB_SELECT2");
$(this).trigger("slctopen.BE_CTB_SELECT2");
apex.jQuery("' || l_item_jq || '").trigger("slctopen");
$("' || l_item_jq || '").trigger("slctopen");
apex.jQuery("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
$("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
Nothing gets triggered...
Can anyone tell me what the problem is here? Thanks in advance.
Best regards,
Nick

Hello,
APEX version 4.1.0.00.32 and 4.2.3.00.08
Browser: latest version of Chrome browser
I'm trying to include plugin events for the Select2 APEX plugin but facing one rather annoying issue; the dynamic actions based on the plugin events are not getting triggered. These are the steps I have taken:
1. Registered several events with the plugin (e.g. slctchange, slctopen, slcthighlight, etc.). These events are based on the official Select2 documentation.
2. Modified the render function to include event handlers that trigger the appropriate Select2 event.
$("' || l_item_jq || '").on("change", function(e) {
apex.jQuery(this).trigger("slctchange", { val:e.val, added:e.added, removed:e.removed });
$("' || l_item_jq || '").on("select2-opening", function(e) {
apex.jQuery(this).trigger("slctopening");
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$("' || l_item_jq || '").on("select2-highlight", function(e) {
apex.jQuery(this).trigger("slcthighlight", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-selecting", function(e) {
apex.jQuery(this).trigger("slctselecting", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-clearing", function(e) {
apex.jQuery(this).trigger("slctclearing");
$("' || l_item_jq || '").on("select2-removed", function(e) {
apex.jQuery(this).trigger("slctremoved", { val:e.val, choice:e.choice });
$("' || l_item_jq || '").on("select2-focus", function(e) {
apex.jQuery(this).trigger("slctfocus");
$("' || l_item_jq || '").on("select2-blur", function(e) {
apex.jQuery(this).trigger("slctblur");
I can confirm that the slctchange event (the first event in the list) is working properly both in APEX 4.1 and 4.2. Please note that I had to use apex.jQuery instead of $ to get it to work in 4.1. Might be because I overloaded jQuery in 4.1. Anyway, all others events are not getting triggered for some reason. The event handlers are getting executed for the appropriate event; that's not the problem. I guess the source of the problem lies with the trigger function. It simply doesn't trigger any of my dynamic actions.
To make things even more complicated, it is possible to trigger the events manually in console. So if I execute this statement:
apex.jQuery("#P20_SINGLE_VALUE_NEW").trigger("slctopen");
Then I get back the result from the dynamic action.
I tried a lot of different ways to trigger the plugin event. For example:
$("' || l_item_jq || '").on("select2-open", function(e) {
apex.jQuery(this).trigger("slctopen");
$(this).trigger("slctopen");
apex.jQuery(this).trigger("slctopen.BE_CTB_SELECT2");
$(this).trigger("slctopen.BE_CTB_SELECT2");
apex.jQuery("' || l_item_jq || '").trigger("slctopen");
$("' || l_item_jq || '").trigger("slctopen");
apex.jQuery("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
$("' || l_item_jq || '").trigger("slctopen.BE_CTB_SELECT2");
Nothing gets triggered...
Can anyone tell me what the problem is here? Thanks in advance.
Best regards,
Nick

User-exit not getting triggered in VA32

Hello Experts,
Iu2019ve a requirement and Iu2019m working on Change Scheduling Agreement u2018t-code VA32u2019. According to requirement I need to capture all header data and data in Sales, Item Overview, Item Detail and Ordering party tabs. Iu2019ve set the break points in almost all the user-exits but only one FM (EXIT_SAPLV45L_002) of exit u2018V45L0001u2019 is getting trigger. Even though other exits/FM has all the tables as import/export parameters which I need but they are not getting triggered. Can anybody please tell me which user-exit / BADI I should use to capture the required data?
Thanks.

Hello Experts,
Thanks a lot Vijay for you reply. Iu2019ve seen user exits of MV45AFZZ include and looks like USEREXIT_SAVE_DOCUMENT_PREPARE is the correct user exit. But I havenu2019t use Includes before can you or anybody else please tell me how to write code in include. I know how to search an include in a program but not sure how to add code in the user exit.
Thanks

Changes are not getting reflected in Process Chain after changes.

Hello,
I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
I need some suggestion on this.
Regards,
Sanjay

Hi Sanjay.......
R u in Display mode..........click on Change mode...........
If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
U can try activating it manually or re-transport the active version..........
Regards,
Debjani......

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

BBP_PGRP_ASSIGN_BAdI:Purchase Grp & Purchase Org. are not getting changed

Hi Experts ,
Actual Process:
As per the normal process when Purchase requisiton is created in ECC then it will get reflected to SRM through BBP_EXTREQ_TRANSFER.So while SRM creating that it will assign some deflaut purchase group and organisation .
Requirement given by user:
But user requires the actual purchase org and purchase group to be determined from back end i.e.ECC and reflect the changes in SRM .So we have tried implementing the BADI ->Method:( BBP_PGRP_ASSIGN_BAdI->BBP_SC_PGRP_ASSIGN) using filter option EXTREQ_INB.
Now after implementation when we debug the badi the values are getting updated coorectly in the Change attriutes of Badi .
After the badi execution finished will Org values are not getting modified .So on further anlyses we found that in CT_ITEM(Shopping Cart Item details) the value EB_LOG_SYSTEM is showing as SRMCLIENT300(SRM System ID) but when we manually changed that to EBD220(ECC system ID) the data is getting updated correctly in SRM .
As per my understanding the back end system for SRM is ECC sytem id .But here it is capturing SRM system id.
So I want to know how the standard will capture the logical system as SRM ..instead EBD ..?
Regards
Phani.

Hi Sanjeev,
Backend purchase group is on under Act ECS.
Here the main issue is - Users placed under backend purchase group (org -model) However when we trying to create ECS PO in SRM , noticed that system is picking local purchase group . Hence not replicating to backend system.
I hope BADI should be enabled (BBPPGRPFIND) - could you please through some light on this ,how to proceed with this BADI?
Thanks in advance
Harish

Workflow not getting triggered on status change

Hiii Everyone
Workflow is not getting triggered whenever I change the status of the Order (Lead). When we create a lead a workflow is triggered.
1. If the status is Open a mail is sent.
2. Then the status is checked for in process. And whenever the status is changed to inprocess it is assigned to the agent by the rule attached to the workflow.
3. And again when the status is changed to sanctioned a mail is sent.
Now problem is if I create a lead and change its status to inprocess and then save , then the mail is sent and it is assigned to the agent properly. But when I change the status to sanctioned , then the mail is not sent for sanctioned(i.e. no worklfow step is shown in swel).
If I open the lead and save it then the mail is sent properly. But then after that when I change the status to inprocess, the workflow is not showing agent assignment (jn swel).
Summary: Whenever I cahnge the status after saving the order , the workflow is not showing any further step .
Please suggest the solution.
Regards
Shafali

Hi,
Your workflow has been triggered when the status is open and then when change the status to in process,it is not sending mail as there is no agent assignment.
That means, workflow triggered, but it is not going to the next step.
Is it a standard or custom one?
Can you post the workflow log screenshot over here?
Cheers,
Raja.D

When inserting 2 column details in a single table using Stored Procedure.Only 2 Column details getting inserted.1column details are not getting into the table.Please see the below script and help me to change.

Line 390 Under the (Insert into SALES_TRADEIN Table)
I need to insert (TradeIn_1_VIN) Values If there is no values in (TradeIn_1_VIN) then i have to insert (TradeIn_2_VIN) values to the (SALES_TRADEIN) Table.
After i run then below script only (TradeIn_2_VIN) values are get inserted in the table. (TradeIn_1_VIN) are not getting loaded in to the table.
I think there is the problem from Line No (404 to 414) Please help me change those particular lines to insert (TradeIn_1_VIN) Values also.If there is no details then (TradeIn_2_VIN) need to be inserted.
-- =============================================
-- Stored Procedure for Flatfile_Sales
-- =============================================
USE [IconicMarketing]
---==========Sales_Cursor
--USE [IconicMarketing]
--GO
DECLARE
@FileType
varchar(50),
@ACDealerID
varchar(50),
@ClientDealerID
varchar(50),
@DMSType
varchar(50),
@DealNumber
varchar(50),
@CustomerNumber
varchar(50),
@CustomerName
varchar(50),
@CustomerFirstName
varchar(50),
@CustomerLastName
varchar(50),
@CustomerAddress
varchar(50),
@CustomerCity
varchar(50),
@CustomerState
varchar(50),
@CustomerZip
varchar(50),
@CustomerCounty
varchar(50),
@CustomerHomePhone
varchar(50),
@CustomerWorkPhone
varchar(50),
@CustomerCellPhone
varchar(50),
@CustomerPagerPhone
varchar(50),
@CustomerEmail
varchar(50),
@CustomerBirthDate
varchar(50),
@MailBlock
varchar(50),
@CoBuyerName
varchar(50),
@CoBuyerFirstName
varchar(50),
@CoBuyerLastName
varchar(50),
@CoBuyerAddress
varchar(50),
@CoBuyerCity
varchar(50),
@CoBuyerState
varchar(50),
@CoBuyerZip
varchar(50),
@CoBuyerCounty
varchar(50),
@CoBuyerHomePhone
varchar(50),
@CoBuyerWorkPhone
varchar(50),
@CoBuyerBirthDate
varchar(50),
@Salesman_1_Number
varchar(50),
@Salesman_1_Name
varchar(50),
@Salesman_2_Number
varchar(50),
@Salesman_2_Name
varchar(50),
@ClosingManagerName
varchar(50),
@ClosingManagerNumber
varchar(50),
@F_AND_I_ManagerNumber
varchar(50),
@F_AND_I_ManagerName
varchar(50),
@SalesManagerNumber
varchar(50),
@SalesManagerName
varchar(50),
@EntryDate
varchar(50),
@DealBookDate
varchar(50),
@VehicleYear
varchar(50),
@VehicleMake
varchar(50),
@VehicleModel
varchar(50),
@VehicleStockNumber
varchar(50),
@VehicleVIN
varchar(50),
@VehicleExteriorColor
varchar(50),
@VehicleInteriorColor
varchar(50),
@VehicleMileage
varchar(50),
@VehicleType
varchar(50),
@InServiceDate
varchar(50),
@HoldBackAmount
varchar(50),
@DealType
varchar(50),
@SaleType
varchar(50),
@BankCode
varchar(50),
@BankName
varchar(50),
@SalesmanCommission
varchar(50),
@GrossProfitSale
varchar(50),
@FinanceReserve
varchar(50),
@CreditLifePremium
varchar(50),
@CreditLifeCommision
varchar(50),
@TotalInsuranceReserve
varchar(50),
@BalloonAmount
varchar(50),
@CashPrice
varchar(50),
@AmountFinanced
varchar(50),
@TotalOfPayments
varchar(50),
@MSRP varchar(50),
@DownPayment
varchar(50),
@SecurityDesposit
varchar(50),
@Rebate
varchar(50),
@Term varchar(50),
@RetailPayment
varchar(50),
@PaymentType
varchar(50),
@RetailFirstPayDate
varchar(50),
@LeaseFirstPayDate
varchar(50),
@DayToFirstPayment
varchar(50),
@LeaseAnnualMiles
varchar(50),
@MileageRate
varchar(50),
@APRRate
varchar(50),
@ResidualAmount
varchar(50),
@LicenseFee
varchar(50),
@RegistrationFee
varchar(50),
@TotalTax
varchar(50),
@ExtendedWarrantyName
varchar(50),
@ExtendedWarrantyTerm
varchar(50),
@ExtendedWarrantyLimitMiles
varchar(50),
@ExtendedWarrantyDollar
varchar(50),
@ExtendedWarrantyProfit
varchar(50),
@FrontGross
varchar(50),
@BackGross
varchar(50),
@TradeIn_1_VIN
varchar(50),
@TradeIn_2_VIN
varchar(50),
@TradeIn_1_Make
varchar(50),
@TradeIn_2_Make
varchar(50),
@TradeIn_1_Model
varchar(50),
@TradeIn_2_Model
varchar(50),
@TradeIn_1_ExteriorColor
varchar(50),
@TradeIn_2_ExteriorColor
varchar(50),
@TradeIn_1_Year
varchar(50),
@TradeIn_2_Year
varchar(50),
@TradeIn_1_Mileage
varchar(50),
@TradeIn_2_Mileage
varchar(50),
@TradeIn_1_Gross
varchar(50),
@TradeIn_2_Gross
varchar(50),
@TradeIn_1_Payoff
varchar(50),
@TradeIn_2_Payoff
varchar(50),
@TradeIn_1_ACV
varchar(50),
@TradeIn_2_ACV
varchar(50),
@Fee_1_Name
varchar(50),
@Fee_1_Fee
varchar(50),
@Fee_1_Commission
varchar(50),
@Fee_2_Name
varchar(50),
@Fee_2_Fee
varchar(50),
@Fee_2_Commission
varchar(50),
@Fee_3_Name
varchar(50),
@Fee_3_Fee
varchar(50),
@Fee_3_Commission
varchar(50),
@Fee_4_Name
varchar(50),
@Fee_4_Fee
varchar(50),
@Fee_4_Commission
varchar(50),
@Fee_5_Name
varchar(50),
@Fee_5_Fee
varchar(50),
@Fee_5_Commission
varchar(50),
@Fee_6_Name
varchar(50),
@Fee_6_Fee
varchar(50),
@Fee_6_Commission
varchar(50),
@Fee_7_Name
varchar(50),
@Fee_7_Fee
varchar(50),
@Fee_7_Commission
varchar(50),
@Fee_8_Name
varchar(50),
@Fee_8_Fee
varchar(50),
@Fee_8_Commission
varchar(50),
@Fee_9_Name
varchar(50),
@Fee_9_Fee
varchar(50),
@Fee_9_Commission
varchar(50),
@Fee_10_Name
varchar(50),
@Fee_10_Fee
varchar(50),
@Fee_10_Commission
varchar(50),
@ContractDate
varchar(50),
@InsuranceName
varchar(50),
@InsuranceAgentName
varchar(50),
@InsuranceAddress
varchar(50),
@InsuranceCity
varchar(50),
@InsuranceState
varchar(50),
@InsuranceZip
varchar(50),
@InsurancePhone
varchar(50),
@InsurancePolicyNumber
varchar(50),
@InsuranceEffectiveDate
varchar(50),
@InsuranceExpirationDate
varchar(50),
@InsuranceCompensationDeduction
varchar(50),
@TradeIn_1_InteriorColor
varchar(50),
@TradeIn_2_InteriorColor
varchar(50),
@PhoneBlock
varchar(50),
@LicensePlateNumber
varchar(50),
@Cost varchar(50),
@InvoiceAmount
varchar(50),
@FinanceCharge
varchar(50),
@TotalPickupPayment
varchar(50),
@TotalAccessories
varchar(50),
@TotalDriveOffAmount
varchar(50),
@EmailBlock
varchar(50),
@ModelDescriptionOfCarSold
varchar(50),
@VehicleClassification
varchar(50),
@ModelNumberOfCarSold
varchar(50),
@GAPPremium
varchar(50),
@LastInstallmentDate
varchar(50),
@CashDeposit
varchar(50),
@AHPremium
varchar(50),
@LeaseRate
varchar(50),
@DealerSelect
varchar(50),
@LeasePayment
varchar(50),
@LeaseNetCapCost
varchar(50),
@LeaseTotalCapReduction
varchar(50),
@DealStatus
varchar(50),
@CustomerSuffix
varchar(50),
@CustomerSalutation
varchar(50),
@CustomerAddress2
varchar(50),
@CustomerMiddleName
varchar(50),
@GlobalOptOut
varchar(50),
@LeaseTerm
varchar(50),
@ExtendedWarrantyFlag
varchar(50),
@Salesman_3_Number
varchar(50),
@Salesman_3_Name
varchar(50),
@Salesman_4_Number
varchar(50),
@Salesman_4_Name
varchar(50),
@Salesman_5_Number
varchar(50),
@Salesman_5_Name
varchar(50),
@Salesman_6_Number
varchar(50),
@Salesman_6_Name
varchar(50),
@APRRate2
varchar(50),
@APRRate3
varchar(50),
@APRRate4
varchar(50),
@Term2
varchar(50),
@SecurityDeposit2
varchar(50),
@DownPayment2
varchar(50),
@TotalOfPayments2
varchar(50),
@BasePayment
varchar(50),
@JournalSaleAmount
varchar(50),
@IndividualBusinessFlag
varchar(50),
@InventoryDate
varchar(50),
@StatusDate
varchar(50),
@ListPrice
varchar(50),
@NetTradeAmount
varchar(50),
@TrimLevel
varchar(50),
@SubTrimLevel
varchar(50),
@BodyDescription
varchar(50),
@BodyDoorCount
varchar(50),
@TransmissionDesc
varchar(50),
@EngineDesc
varchar(50),
@TypeCode
varchar(50),
@SLCT2
varchar(50),
@DealDateOffset
varchar(50),
@AccountingDate
varchar(50),
@CoBuyerCustNum
varchar(50),
@CoBuyerCell
varchar(50),
@CoBuyerEmail
varchar(50),
@CoBuyerSalutation
varchar(50),
@CoBuyerPhoneBlock
varchar(50),
@CoBuyerMailBlock
varchar(50),
@CoBuyerEmailBlock
varchar(50),
@RealBookDate
varchar(50),
@CoBuyerMiddleName
varchar(50),
@CoBuyerCountry
varchar(50),
@CoBuyerAddress2
varchar(50),
@CoBuyerOptOut
varchar(50),
@CoBuyerOccupation
varchar(50),
@CoBuyerEmployer
varchar(50),
@Country
varchar(50),
@Occupation
varchar(50),
@Employer
varchar(50),
@Salesman2Commission
varchar(50),
@BankAddress
varchar(50),
@BankCity
varchar(50),
@BankState
varchar(50),
@BankZip
varchar(50),
@LeaseEstimatedMiles
varchar(50),
@AFTReserve
varchar(50),
@CreditLifePrem
varchar(50),
@CreditLifeRes
varchar(50),
@AHRes
varchar(50),
@Language
varchar(50),
@BuyRate
varchar(50),
@DMVAmount
varchar(50),
@Weight
varchar(50),
@StateDMVTotFee
varchar(50),
@ROSNumber
varchar(50),
@Incentives
varchar(50),
@CASS_STD_LINE1
varchar(50),
@CASS_STD_LINE2
varchar(50),
@CASS_STD_CITY
varchar(50),
@CASS_STD_STATE
varchar(50),
@CASS_STD_ZIP
varchar(50),
@CASS_STD_ZIP4
varchar(50),
@CASS_STD_DPBC
varchar(50),
@CASS_STD_CHKDGT
varchar(50),
@CASS_STD_CART
varchar(50),
@CASS_STD_LOT
varchar(50),
@CASS_STD_LOTORD
varchar(50),
@CASS_STD_URB
varchar(50),
@CASS_STD_FIPS
varchar(50),
@CASS_STD_EWS
varchar(50),
@CASS_STD_LACS
varchar(50),
@CASS_STD_ZIPMOV
varchar(50),
@CASS_STD_Z4LOM
varchar(50),
@CASS_STD_NDIAPT
varchar(50),
@CASS_STD_NDIRR
varchar(50),
@CASS_STD_LACSRT
varchar(50),
@CASS_STD_ERROR_CD
varchar(50),
@NCOA_AC_ID
varchar(50),
@NCOA_COA_ADDSRC
varchar(50),
@NCOA_COA_MATCH
varchar(50),
@NCOA_COA_MOVTYP
varchar(50),
@NCOA_COA_DATE
varchar(50),
@NCOA_COA_DELCD
varchar(50),
@NCOA_COA_RTYPE
varchar(50),
@NCOA_COA_RTNCD
varchar(50),
@NCOA_COA_LINE1
varchar(50),
@NCOA_COA_LINE2
varchar(50),
@NCOA_COA_CITY
varchar(50),
@NCOA_COA_STATE
varchar(50),
@NCOA_COA_ZIP
varchar(50),
@NCOA_COA_ZIP4
varchar(50),
@NCOA_COA_DPBC
varchar(50),
@NCOA_COA_CHKDGT
varchar(50),
@NCOA_COA_CART
varchar(50),
@NCOA_COA_LOT
varchar(50),
@NCOA_COA_LOTORD
varchar(50),
@NCOA_COA_URB
varchar(50),
@NCOA_COA_Z4LOM
varchar(50),
@NCOA_COA_ACTION
varchar(50),
@NCOA_COA_QNAME
varchar(50),
@NCOA_DPV_AA
varchar(50),
@NCOA_DPV_A1
varchar(50),
@NCOA_DPV_BB
varchar(50),
@NCOA_DPV_CC
varchar(50),
@NCOA_DPV_M1
varchar(50),
@NCOA_DPV_M3
varchar(50),
@NCOA_DPV_N1
varchar(50),
@NCOA_DPV_P1
varchar(50),
@NCOA_DPV_P3
varchar(50),
@NCOA_DPV_RR
varchar(50),
@NCOA_DPV_R1
varchar(50),
@NCOA_DPV_STATUS
varchar(50),
@NCOA_DPV_F1
varchar(50),
@NCOA_DPV_G1
varchar(50),
@NCOA_DPV_U1
varchar(50),
@myerror
varchar(500),
@SalesID
int,
@errornumber int,
@errorseverity varchar(500),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000);
DECLARE Sales_Cursor CURSOR FOR
SELECT * from FLATFILE_SALES;
OPEN Sales_Cursor;
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @VehicleVIN ;
--===============================================================================
-- ****************** insert into Sales Table ***********
BEGIN TRY
INSERT INTO Sales
IconicDealerID,
DealNumber,
CustomerNumber,
DMSType,
ContractDate
VALUES (@ClientDealerID,@DealNumber,@CustomerNumber,@DMSType,@ContractDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER()
,@errorseverity = ERROR_SEVERITY()
,@errorstate = ERROR_STATE()
,@errorprocedure = ERROR_PROCEDURE()
,@errorline = ERROR_LINE()
,@errormessage = ERROR_MESSAGE();
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
@errornumber ,
@errorseverity ,
@errorstate,
@errorprocedure,
@errorline,
@errormessage);
END CATCH
PRINT @errornumber;
PRINT @errorseverity;
PRINT @errorprocedure;
PRINT @errorline;
PRINT @errormessage;
PRINT @errorstate;
set @myerror = @@ERROR;
-- This PRINT statement prints 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
PRINT N'Error = ' + @myerror;
set @SalesID = scope_identity();
PRINT @SalesID;
--================================================================================
--Insert into SALES_TRADEIN Table
BEGIN TRY
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is not null then @TradeIn_2_VIN end,
case when @TradeIn_1_Make is not null then @TradeIn_2_Make end,
case when @TradeIn_1_Model is not null then @TradeIn_2_Model end,
case when @TradeIn_1_ExteriorColor is not null then @TradeIn_2_ExteriorColor end,
case when @TradeIn_1_Year is not null then @TradeIn_2_Year end,
case when @TradeIn_1_Mileage is not null then @TradeIn_2_Mileage end,
case when @TradeIn_1_Gross is not null then @TradeIn_2_Gross end,
case when @TradeIn_1_Payoff is not null then @TradeIn_2_Payoff end,
case when @TradeIn_1_ACV is not null then @TradeIn_2_ACV end,
case when @TradeIn_1_InteriorColor is not null then @TradeIn_2_InteriorColor end
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER()
,@errorseverity = ERROR_SEVERITY()
,@errorstate = ERROR_STATE()
,@errorprocedure = ERROR_PROCEDURE()
,@errorline = ERROR_LINE()
,@errormessage = ERROR_MESSAGE();
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
END CATCH

This is what I've understood from your question. You want to replace @TradeIn_2_VIN value if @TradeIn_1_VIN
is NULL, else the value of @TradeIn_1_VIN.
If this is the requirement then, your CASE statement is missing ELSE part. You can re-write this as below
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN
ELSE @TradeIn_1_VIN end,
or simply you can replace the CASE statement with the below
COALESCE function,
COALESCE(@TradeIn_1_VIN, @TradeIn_2_VIN),
Krishnakumar S

Change Process are not getting triggered

Similar Messages

Maybe you are looking for