Change Sales Order category to custom category in CIF

Hi,
I am CIFing Sales Order from ECC to APO, as per my requirement I need to change the category of sales order for which their are no confirmation.
The Sales order get CIFed to APO in standard category BM and i want to change to custom category ZM
I am using a user exit EXIT_SAPLCSLS_002 to read the Sales Order in ECC and changing the Sales Order ATP category to ZM but I am getting an error that it does not match correctly.
but when I use a different standard category BL instead of ZM it works properly.
Has anyone used an user exit to change the Sales Order Category, can you please help?
Thanks & Regards,
Sanjog Mishrikotkar

Hi,
Please try the user exit EXIT_/SAPAPO/SAPLCIF_SLS_001 in APO. This will be called while transferring the Sales orders to APO and the category will be changed. Also maintain the category you are changing in APO.
Please look at the link for further details
http://help.sap.com/saphelp_scm50/helpdata/EN/8f/987337e68ae526e10000009b38f889/content.htm
Regards,
Sireesh

Similar Messages

Transaction VKM1 - Changes Sales Order Line Items Custom Fileds

Hi,
I have a challenge to indentify the impact of VKM1 on a Sales Order Line Item Customer Enhanced Fields. When credit hold for the customer is released in VKM1, I want to prevent some of the changes to the line items in the User Exit. The Problems I am not sure, How VKM1 is calling the Transaction VA02 or those Sales Order User Exits to modify certain customer enhanced fields. I tried Activation of Break Point in Update Task but did not stop at the Break points set up in the User Exit. How does Transaction VKM1 call the Sales Orders to execute changes? Is it through BAPI or Call Transaction VA02 or some thing else.
Can any One please help me? Appreciate Your Help in advance.
Thanks,
Kannan

VKM1 uses FM SD_ORDER_CREDIT_RELEASE to release orders on credit.

Sytem should not allow to save the sales order based on risk category

Hi,
My user want to control the creation of sales orders based on risk category in credit control area.
We created a new risk category - 30 Not authorized.
And we made necessary configs also , like assignment of risk category and company code in OVFL.
We assigned 30 risk category in FD32 for customers also.
But while creation of sales order system is allowing to save the order.
My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
How can we config. this
thanks
Sateesh

hi,
dont want to save the sales order if the credit limit exist ?
then maintain block in OVA8
choose
your credit control area risk categories credit group
1000 30 Not authorized 01
checks tab
choose static and maintain B
this will give you error message and it will not allow you to save the sales order
regards
senya
Edited by: senya_1111 on Oct 1, 2009 2:26 PM

Changing sales order for a Credit blocked customer

Hi Gurus
One of the requirement of my client is that they create sales order for a customer and deliver the goods. During sales order creation billing block is automatically applied. This block is removed by a batch job after the goods are delivered. Sometime credit department block the customer using FD32 (KNKK-CRBLB). Now when the batch job is run to remove the billing block the system will not allow it for that order as the system calls VA02 during that batch job run. When you process a sales order using VA02 for a customer which is blocked (KNKK-CRBLB) then system will through error message V1 (154) i.e Order receipt/delivery not possible, credit customer blocked.
So the batch job will not be able to remove the billing block from the order. NOw the requiremetn is that how can I achieve this so that the billing block are removed by that batch job as the customers has already been delivered the goods (Any user exit?).
Thanks
KTK

Dear KTK,
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Reward points if this helpful.
Regards,
Naveen.

End User Transaction for Mass Change Sales Orders

Hello,
Transaction MASS can be used to change sales orders using object type BUS2032, however, end users are not allowed access to MASS.
In most other cases, the object types can be accessed by individual transactions, for example, MEMASSPO for BUS2012 and XD99 for KNA1.
But I cannot seem to find a similar transaction for object type BUS2032, does anyone know whether one exists or how to create such a shortcut.
Thanks,
Jake.

Hi
See SAP Note 483303 - BUS2032: Only sales orders of category VBAK-VBTYP = 'C'
Regards
Eduardo

User Exit or BADI in APO to change sales order relevant data while CIF

Hi Everyone,
I require User exit or BADI at APO side to change customer field kunnr of sales order after it enters APO through CIF.
My requirement is to replace KUNNR field with KDGRP field of sales order.
The data will pass through CIF in APO.
Is there any user exit or BADI for the same?
Sample code will be of great help.
Regards,
Kashyap.

Hi ,
Resolved myself.
customer exit APOCF010
Regards,
Kashyap

Changing Sales Order PARTNER from 'MASS' transaction

Hi,
I have a requirement to change partner details (e.g. SHIP TO party from SH1 to SH2) for sales order. I need to use tcode 'MASS' (Mass maintainance) for BUS2032. But it does not have the option to change partner details.
Can anybody let me any approach to achieve this. If we can do it through a config or may be creating a custom business object etc...
I could found out the thread below talking about the same issue, but there is no solution to that. I want to build the solution around SAP standard and not interested for BDC/LSMW/CATT etc.
Mass changes Sales order partners
Thanks,
Madhu
Edited by: Madhu K on Nov 1, 2011 11:58 PM

Alan
I am ok to create a custom tcode for MASS. Do I need to copy the BUS2032 or the whole TCODE?
My major concern is, how to get the VBPA structure to the selection screen so that it ll show me the I/P fields to enter Old Ship to and New ship to..
Can You please give me some idea on this.
Thanks
Madhu

Change Sales Order, Delivery, Billings Reports

Hi Gurus,
Can any body please tell me is there any Report for change logs of Change Sales Order, Delivery,
Billings & Change report of Customer & Material,
Regards,
Sai

Hi,
There are no standard reports to display the changes made in the Sales orders and the details you had asked.
But for the latest changes you can check in the Table :Header details for change CDHDR and for Item details CDPOS
Or Based on your requirement you can go for a Customized Report
rgds
psk

How to change pricing Conditions in Sales order in change sales order bapi

Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLN

HI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
Import Paramters:
 SALESDOCUMENT - Sales Document Number
 ORDER_HEADER_INX - UPDATEFLAG as 'U'.
 LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
Tables:
 CONDITIONS_IN - ITM_NUMBER,
 COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is '01'
 COND_TYPE,
 COND_VALUE,
 CURRENCY.
 CONDITIONS_INX - ITM_NUMBER,
 COND_COUNT,
 COND_TYPE,
 UPDATEFLAG as 'U',
 CURRENCY.
 Hope i have clarified your query.
Kind Regards
Eswar

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

Getting error in while changing sales order which is created using BAPI

Hi All,
   I have created the sales order using BAPI ( BAPI_SALESORDER_CREATEFROMDAT1 ) and i am successfully creating sales order using this BAPI. But while i want to change sales order iam changing Shipping Conditions in Header Data of sales order .its giving an error .can any know any thing about this.
Error mesage :    No status object is available for SDI 300082407/10    (Order Number/Item Number)
In Header i am passing these values ...
     wa_order_header_in-doc_type = vbak-auart.
    wa_order_header_in-sales_org = vbak-vkorg.
    wa_order_header_in-distr_chan = vbak-vtweg.
    wa_order_header_in-division = vbak-spart.
Do i required to pass the below values ? in Header structure ( BAPISDHEAD1 ).
REFOBJECTTYPE
REFOBJECTKEY
REFDOCTYPE
Regards,
Sudhakar Reddy A

rectified

Duplication of Purchase Order while creating sales orders for a customer

when we try to create sales order for one customer it have to create by picking up the purchase order from the table linearly.
But the problem is that here when we are trying to create multiple sales orders the same purchase order is being picked.
for example..when we create sales order 1 the purchase order picked is PO1 and
for creation of sales order 2 the same purchase order PO1 is being picked up instead of PO2.
No idocs are being generated in this, even to check them..
How shall i resolve this...? Please help me out ASAP

Hi Kumar,
Thanks for the reply. But actually the problem is that this is related to some customized table in the project. When a EDI Batch job runs in the background then automatically the SO is created and the PO is being picked from the table(custom table) and then posted against the respective SO. we are not aware of that job which is triggering this to debug. Once if we can know that particular batch job or pgm or edi or idoc what ever it is then we can debug.
Do you have any idea how can we find that particular pgm/edi/idoc/job name which triggers this creation of SO?

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

Sales order posing without Customer

Hi All,
Sales oder data is sent by the third party system to production without customer ( sold-to-Party / Ship-to-Party ) data, it still creates the sales order in Production environment. The Basic type is ORDERS05 and the message type is ORDERS and the idoc is successfully posted in SAP with status 53.
But when the same data is sent to Quality, it does not allow to create the sales order with out Customer information. The idoc is created but with the status 51 ( Document not posted ) .Please let me know what would be the reason for this.
Please let me also know if i need to check the cofiguration settings in Quality.
Thanks and Regards,
Sireesha.

Hi,
Do you have any customer to your productive sales order or is saved without ?
If you do have please check also IMG configuration in
SPRO>Sales and Distribution>Electronic Data Interchange>EDI Messages>Configure EDI Partners into your receiving system
BR
Aris

New sales order and Change sales order in item level or delete at item leve

I got one requirement. Daily i have to display one report on new sales orders created on that day and any sales order item is modified or any item is deleted or any item is added.
                  How to get the sales order numbers and position numbers which will follow above creteria. I found one function module but it is not giving position numbers and new sales order details.
         Is there any BAPI for this requirement.

I am using "CHANGEDOCUMENT_READ" function module to get the new sales orders created and changed sales order items on a particular time. This function module is getting data from CDHDR and CDPOS tables. But only change sales orders is coming. New sales orders which is created on that time is not getting.
          One of my friend is telling like we have to activate one change pointer to retrive new sales orders also. Which is like there will be one check box.
Is any body having idea on this. Please reply me on briefly with the code to retrive new sales orders and changed sales orders

BAPI / FM to change Sales order item data

Hi,
I need a BAPI or FM to update the following fields of VBAP (Sales Document Item Data)
KZWI2 - Subtotal 2 from pricing procedure for condition
KZWI3 - Subtotal 3 from pricing procedure for condition
KZWI4 - Subtotal 4 from pricing procedure for condition
KZWI5 - Subtotal 5 from pricing procedure for condition
I found FM: ISM_SALES_ITEM_CHANGE for this, but when I use it, it gives me dump for some data object 'XJKNBK'.
Does any one have idea on how to use this FM or if any other FM is there please let me know?
Thanks & Regards,
Sunanda.

hi Sunanda..
I think you can try the Bapi 'BAPI_SALESORDER_CHANGE'. You can make use of its Tables Parameter CONDITIONS_IN and CONDITIONS_INX.
example:
How to change pricing Conditions in Sales order in change sales order bapi
thanks,
Padma

Change Sales Order category to custom category in CIF

Similar Messages

Maybe you are looking for