Sales order posing without Customer

Hi All,
Sales oder data is sent by the third party system to production without customer ( sold-to-Party / Ship-to-Party ) data, it still creates the sales order in Production environment. The Basic type is ORDERS05 and the message type is ORDERS and the idoc is successfully posted in SAP with status 53.
But when the same data is sent to Quality, it does not allow to create the sales order with out Customer information. The idoc is created but with the status 51 ( Document not posted ) .Please let me know what would be the reason for this.
Please let me also know if i need to check the cofiguration settings in Quality.
Thanks and Regards,
Sireesha.

Hi,
Do you have any customer to your productive sales order or is saved without ?
If you do have please check also IMG configuration in
SPRO>Sales and Distribution>Electronic Data Interchange>EDI Messages>Configure EDI Partners into your receiving system
BR
Aris

Similar Messages

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

Duplication of Purchase Order while creating sales orders for a customer

when we try to create sales order for one customer it have to create by picking up the purchase order from the table linearly.
But the problem is that here when we are trying to create multiple sales orders the same purchase order is being picked.
for example..when we create sales order 1 the purchase order picked is PO1 and
for creation of sales order 2 the same purchase order PO1 is being picked up instead of PO2.
No idocs are being generated in this, even to check them..
How shall i resolve this...? Please help me out ASAP

Hi Kumar,
Thanks for the reply. But actually the problem is that this is related to some customized table in the project. When a EDI Batch job runs in the background then automatically the SO is created and the PO is being picked from the table(custom table) and then posted against the respective SO. we are not aware of that job which is triggering this to debug. Once if we can know that particular batch job or pgm or edi or idoc what ever it is then we can debug.
Do you have any idea how can we find that particular pgm/edi/idoc/job name which triggers this creation of SO?

How we can give the confirmation of the sales order to the customer.?

how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SD

A confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps.

Sales order created without contract

Hi Sap Gurus,
We create sales order through contract, But 2 days back contract got deleted and the sales orders created without the contract doesnt have price on it. Now we have many sales order without contract and no price. Is there any way i can update the contract or price to the sales orders other than reversing it
Cheers
Edie

hi
go to t.code OVKJ or OVTP
And assign DUPP with ur Sales doc type and Billing type.
ur probs will be solved( don't forget to check OVKK)
thanks
mk

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Transaction VKM1 - Changes Sales Order Line Items Custom Fileds

Hi,
I have a challenge to indentify the impact of VKM1 on a Sales Order Line Item Customer Enhanced Fields. When credit hold for the customer is released in VKM1, I want to prevent some of the changes to the line items in the User Exit. The Problems I am not sure, How VKM1 is calling the Transaction VA02 or those Sales Order User Exits to modify certain customer enhanced fields. I tried Activation of Break Point in Update Task but did not stop at the Break points set up in the User Exit. How does Transaction VKM1 call the Sales Orders to execute changes? Is it through BAPI or Call Transaction VA02 or some thing else.
Can any One please help me? Appreciate Your Help in advance.
Thanks,
Kannan

VKM1 uses FM SD_ORDER_CREDIT_RELEASE to release orders on credit.

Sales order block in customer master

Hi Gurus,
There is one requiremnet from client.
_Create one additional Sales Order Block which is maintained in the customer master and prevents order creation for these customers._
Can any one tell me where is sales order block in customer master.
Regards,
Ajoy

Hi,
You can block the customer centrally or for the required sales areas using XD05. this is one option.
As i understand additional block at sales order for this customer means you can set the customer credit limit as say 1 $ assuming any of the material that is sold is above that, the system does the credit check and blocks the order. How do you want to deal with this block you can think in terms of credit management settings. This is config.
But if you want to set a block at the sales order dynamically for the required some customers, then you need to implement an user exit like, Userexit_save_document. the authorised users can go in VA02 and remove the block. But to identify in the user exit logic which customer you want to block you need to maintain some master at customer master level.
Anyways let me know if this idea helps you so that i can guide furhter.
regards
sadhu kishore

Invoice request based on multiple sales order for same customer

Hi Team,
I just wanted to know if we can create manual invoice request based on multiple sales order for same customer?
For project based invoice request i have create based on single invoice request.
Appreciate your input here.
Thanks,
Nitin

Dear Ratish,
Thanks for yr reply.
I already did that but it is not serving business purpose.
Comm payment - comes diff time than sales payment.
so ,I will post one entry customer will get hit with total amount Sales + commission
like below
Let say 10, 000 is the sales value and 500 is the commission
So , This entry will get posted
Customer Db- 10,500
Sales Cr- 10,000
Comm Income Cr- 500
But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
So, We wont be knowing for which case we have or havnet received the payment against commission.
As , Customer account is got hit with total amount( Sales+ Comm..value).
Pls advise how to solve this.
Regards,
Sukh

Link Between Sales Order Type and Customer/Material Exclusion

Hi,
Any one know the Link Between Sales Order Type and Customer/Material exclusion tables (Transaction: VB03 ) ?

Hello,
For Tcode VB03 you can check KOTG001 for Customer/Material.
Thanks &Regards,
Abhijit

To save the sales order number in custom table while creation of the order.

Hi Experts,
Does there exist any exit to save the sales order number in a custom table while the sales order is created in VA01. The requirement is to capture the sales order number in a Z table when a field (payment terms ) is changed during the sales order creation.
Regards,
Sunitha

Hi Sunita,
You can store your data in the User exit MV45AFZZ in the form 'userexit_save_document'.
You can navigate to MV45AFZZ from SE38 wherein an access key needs to be generated for that program, if you know to implement enhancement points then you can create an implicit enhancement point in this form without generating an access Key.
Regards,
Ravi Kiran

Sales order not recongnizing customer reco account

Hi Gurus,
User created Customer without reconciliation account somehow. On that account user created Sales order and in the incomplete log there is error that no GL account is mentioned for that customer.
We have not changed customer master and updated with reconciliation account. Even though there is reconciliation account in customer master, in sales order its still coming up with the error that no GL account is determined for the customer.
How do we update the sales order with customer GL account? We can not change sold-to-party in the sales order so don't know how system will update information in the background.
Many thanks

Hi,
The question is contradictory. Initially you mentioned that customer account doesn't have reconciliation account. Sales order is created and is in the log with error. Later you said the customer account is updated? can you please post it again?
Thanks
Giridhar

Change Sales Order category to custom category in CIF

Hi,
I am CIFing Sales Order from ECC to APO, as per my requirement I need to change the category of sales order for which their are no confirmation.
The Sales order get CIFed to APO in standard category BM and i want to change to custom category ZM
I am using a user exit EXIT_SAPLCSLS_002 to read the Sales Order in ECC and changing the Sales Order ATP category to ZM but I am getting an error that it does not match correctly.
but when I use a different standard category BL instead of ZM it works properly.
Has anyone used an user exit to change the Sales Order Category, can you please help?
Thanks & Regards,
Sanjog Mishrikotkar

Hi,
Please try the user exit EXIT_/SAPAPO/SAPLCIF_SLS_001 in APO. This will be called while transferring the Sales orders to APO and the category will be changed. Also maintain the category you are changing in APO.
Please look at the link for further details
http://help.sap.com/saphelp_scm50/helpdata/EN/8f/987337e68ae526e10000009b38f889/content.htm
Regards,
Sireesh

Getting sales orders for a customer

Hi Experts,
Which FM should be used to get all sales orders for a particular customer in ECC 6.0
Thanks and Regards
Shilpi

Hi,
Not sure abt FM.
Did u check VBAK table has a field KUNNR.
You can put query on VBAK with condition Kunnr = 'Customer NO'.
Please check if this serves ur purpose.
Thanks
Praveen

Link Sales Order Type to Customer

Hi gurus,
Do you know if there is anyway of linking a customer to a Sales Order Type?
So that if selling to that customer, everytime that Sales Order type is determined?
Please consider scenario where Sales Orde type is created through DP90 from service orders.
Thanks and best regards,
Víctor Liedo

hi victor,
in standard SAP there is no direct link as such for customer to sales order type.
what is the business logic for the same.
you are linking the sales areas for the document types - not to the customer level - that is one type of control which SAP is providing.
but here you need to enter the sales order type manually before entering the customer for the sales order. so MV45AFZZ : USER EXIT SAVEDOCUMENT_PREPARE.
you can write a piece of code for the same.
you need to hard code account group of the customers & sales document type, so that when ever before saving the sales order the system will check the sales order type used for that particular customer is correct or not and then saves the sales order or else it throws an error
hope this clears your issue
balajia

Sales order posing without Customer

Similar Messages

Maybe you are looking for