Sytem should not allow to save the sales order based on risk category

Hi,
My user want to control the creation of sales orders based on risk category in credit control area.
We created a new risk category - 30 Not authorized.
And we made necessary configs also , like assignment of risk category and company code in OVFL.
We assigned 30 risk category in FD32 for customers also.
But while creation of sales order system is allowing to save the order.
My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
How can we config. this
thanks
Sateesh

hi,
dont want to save the sales order if the credit limit exist ?
then maintain block in OVA8
choose
your credit control area risk categories credit group
1000 30 Not authorized 01
checks tab
choose static and maintain B
this will give you error message and it will not allow you to save the sales order
regards
senya
Edited by: senya_1111 on Oct 1, 2009 2:26 PM

Similar Messages

Conditions Tab should not be displayed in the sales order.

Dear Gurus,
My client wants to hide the conditions tab (header & item) in the sales order while in display mode.
Because his dealers should be in a position to see the pricing strucutre.
Pl guide me how to do this with transaction variant.
Thanks & Regards,
Sreehari

You can create a transaction variant for VA03 and hide the tabs using SHD0. You can also assign it to a separate transaction code if it meets your requirements.

Should not allow to save the delivery documents if material and qty is miss

In SD what is the logic or code in ABAP for this issue.
Points awarded for quick responce.

Hi,
A simple solution is to create transaction variant using transaction SHD0.
Enjoy SAP.

The shipment should not allow to save without partner forwarrding agent.

The CR (forwarding agent) partner is set as Mandatory in the configuration for partner procedure TR, but you can save a shipment without this partner function. We are only using Shipment type Z003 and the TR procedure is assigned, and the CR partner is set as mandatory but the system is not requiring it. Why isn't the Mandatory flag working in create mode? If there is a CR on a shipment already, it will not let you delete it, but it will let you create a shipment and save without the CR partner. See Shipmentxxx in DX1, it was created and saved without any partners on the partner tab.
The shipment should not allow to save without partner forwarrding agent.

Hi,
Check config for 'Set Up Partner Determination for Shipments'.
I believe the Partner function for Forwarding agent is FA and here you are talking about CR.
Also make sure you Partner determination procedure is reflecting in your Shipment type.
Regards,
Amit

After creation of PO system should not allow to change the price in PO

Hi There,
In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
So please advice.

Hi,
you could set in customizing for field selection keys the net price
to display for ME22N so that changes can not be made
(transaction OLME -> purchase order -> Define Screen Layout at Document Level).
Please check that you have set all the relevant field selection
groups to display: AKTV, ME22, ME22N... (read and apply note 30316)
Other workaround is try to do by yourself with the badi
ME_PROCESS_PO_CUST and send your own error message.
Regards,
Edit

System should not allow to do the changes in PO once the ID created.

Hi All,
Once the Inbound Delivery is Created based on the Purchse Order, System should not allow to do the changes in the Purchase Order like Deletion of Item, etc..
Any Configuration Changes is avaliable. ?
Regards,
Sudhakar

Dear,
Please check the staus in order
Current order status xxxx does not allow goods receipt (Message no. C6009)? is this the message?
This will not allow you to do GR for production order when you activate status profile "SAT1" in the production order. After that when you confirm order it will automatically assign next user status i.e. "SAT2" (if not assign it manually in CO02) it will allow you to do GR for that production order.
Regards,
R.Brahmankar

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

CO-PA document is not created while doing the sale order cycle

Dear Experts,
I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
and (VF04,VF02). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
Please suggest me where i miss the settings..
Regards,
Krishna.V

Dear Ajay,
Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
Hear we maintained all gl's chart of acc level and cost elements also.
Please suggest me...
Regards,
Krishna. v

Product hierarchy is not being maintained in the sales order material

Hi,
I have an issue where the product hier is not being maintained in the sales order for some of the materials although the material master has the prod hier maintained.. The main program is SAPMV45A and I have checked all the exits in MV45AFZZ. In none of these exits the PRODH field in XVBAP is being populated. I would like top know if anyone has faced a problem like this.
cheers
Aveek

Hi,
Thanks for your suggestion. The poduct hierarchy is maintained in the material master but not being picked up at the time of creating the sales order. I have found the solution and coding has to be done in the MV45AFZZ.
cheers
Aveek

To save the sales order number in custom table while creation of the order.

Hi Experts,
Does there exist any exit to save the sales order number in a custom table while the sales order is created in VA01. The requirement is to capture the sales order number in a Z table when a field (payment terms ) is changed during the sales order creation.
Regards,
Sunitha

Hi Sunita,
You can store your data in the User exit MV45AFZZ in the form 'userexit_save_document'.
You can navigate to MV45AFZZ from SE38 wherein an access key needs to be generated for that program, if you know to implement enhancement points then you can create an implicit enhancement point in this form without generating an access Key.
Regards,
Ravi Kiran

Exit for save the sales order

When a new sales order created at that time based on perticular order type (ZRE) i need to check the vale of
Screen field: KNVV-KZAZU (combine delivery) needs to deactivated.
Program Name: SAPMF02D
Please suggest the active user exit or routine that will trigger at the time save the sales order.
Thanks & regards,
Vinayak More.

If you want to deactivate the field then you need to check this form..
FORM USEREXIT_FIELD_MODIFICATION.
* CASE SCREEN-NAME.
* WHEN 'VBAK-VBELN'.
* SCREEN-ACTIVE = 0.
* ENDCASE.
ENDFORM.

Exit or routine or BADI for save the sales order

Exit or routine or BADI for save the sales order.
Please give your input Asap.
Thanks & regards,
Vinayak More.

Hi Vinayak,
please go through the steps and u will be able to find BADI of any transaction.
&*************Reward point if helpful**************&
BADI Info:
Method 1:
Go to Tranaction: SE24.
open class CL_EXITHANDLER
Open the method " GetInstance"
Put Break point in the statement
call method cl_exithandler=>get_class_name_by_interface
Now execute the Transaction which you need teh BDC it will automatically stops at the the method. In debugging mode double click on the variable: " exit_name" It will return the BADI Name.
Method 2:
find the Package name and go to the tranaction SE84.
Enter the package name
inside the left navaigaiton panel there is one option " Enhancements" click on this enhancement and then enter the package name and execute it. you will get hte number of enhancement.

Custom duty should be copied into the Sales order based on material

Hi,
Requirement is only Custom duty Tax condition types to copied into the sales order based on material (for e.g A) .Suppose customer X is buying material Y then different tax condition types is to be applied but if the same customer is buying material A then only Custom duty will be copied.
But we can set in the customer Master whether the maerial is taxable or not.So where to do the right tax classification settings so that sysyem will automatically fetch the right tax condition types if i enter one material which is applicable for Custom Duty only
We are using TAXINJ.
Regards
Jyoti

Dear Jyoti
As per your post, the material code is different for the same customer and hence you can differentiate the tax classification in material master. That is for material X, if you maintain Tax classification 1 in Sales Org1 view, maintain 2 for the material Y.
Now maintain different tax code for these tax classifications in VK11 / UTXJ.
thanks
G. Lakshmipathi

During PO creation system should not allow to save if it cross the PR value

Hi,
As I said in above subject line while creating the PO system should not allow to create more than the PR value and Quantity.
Always system should allow the person to create the Po with in PR value as well quantity in order to set up please let me know the configuration settings.
thanks in advance.

Hi,
Please search the forum first for your queries for existance and then post queries., coz, the same question has been answered so many times before.

Payment Guarantee Procedure not appearing automatically in the sales order

Hi All,
I have configured the risk management following all the steps as below but somehow the payment guarantee procedure does not auto appear in my sales order.
Step 1: Financial Document Type
Step 2: Field Controls in Fin Doc Type
Step 3: Financial Document Control
Step 4: Maintain Forms of Payment Guarantee
Step 5: Define & Assign Payment Guarantee Procedure
Step 6: Customer Payment Guarantee Procedure
Step 7: Assign Doc Procedures to Order Types
Step 8: Payment Guar.Procedure Determination
Kindly advise if I have missed out any steps

Hi,
please check
1 . Define Payment Guarantee Schema Determination
2 . Activation of credit for item category
With regards,
Mrinal

Sytem should not allow to save the sales order based on risk category

Similar Messages

Maybe you are looking for