Change the printer code for eprint services

I need to change printer code for eprint services

Is it not accepting the printer code that printed out on the information page? Is it giving an error message at the website when you enter  that code?  If that code is over 24 hours old the site will not accept that code.  You would just have to reprint the info page again from the web services icon on the display screen. For most printers, that icon is in the top left corner and looks like a piece of paper with a target behind it, generally speaking.  The code, 90% of the time, will not change and will be the same.  The page just has to be reprinted as the 24 hour time limit is a security measure.  If you need further assistance beyond this please let me know what printer model you have and the model of router you use in your wireless setup.  If you need assistance finding your product number so that the exact model of printer can be pinpointed, look at this link here. It shows how to locate that number for any HP product that you may own. 
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

  • I need to change my print code for eprint service

    HPPHOTOSMART 5510 E-ALL-IN-ONE

    I answered your other post and I and now that I see the type of printer that you have I can tell you that you would need to tap the button labeled "e Print"  and then on the screen there should appear a  blue button in the bottom  right corner that states "print info" reprint that page and use the code at the site to add the printer to your account that you created. 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Where do I enter the printer code for eprint?

    I keep getting this error when I try to sign up for eprint getting started..Ajax submit failed: error = 403, Forbidden. Where do I enter the printer code and am I using an exisitng email address and creating a new password?

    Hi,
    This is a known error, the work around is to use different browser such as Firefox or Chrome.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I print a configuration page to find the printer code for my laserjet printer to eprint?

    How do I print the configuration page to find the printer code for my laserjet p1102W?

    Guide here:
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Unable to locate the Printer Code for Desktjet 3070A, please help?

    Unable to locate the Printer Code for Desktjet 3070A, please help?

    You can follow this link for steps on getting started with ePrint on the Deskjet 3070A: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&cc=us&dlc=en&lc=en&product=5068754&too...=
    I am an HP employee

  • How can I change the area code for DVD's?

    I brought some DVD's from Germany and watched them on my Mac Pro. After the DVD was involved in the drive I have to change the area code for the drive. I don't know why but I did it. I could watch the film. Today I like to watch a DVD from US but after the DVD was involved I got a message "the area code does'nt match the DVD code" and I can not change the area code.
    What can I do to watch both arts of DVD's. Isn't that normal to have DVD's all over the world?

    Here is the bit that Bengt forgot to answer!
    DVD Player: About DVD-Video Regions
    Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
    http://support.apple.com/kb/HT2397
    Once you have changed the region settingon your Mac five times it is set in stone for ever.
    Try using VLC for playback instead:
    http://www.videolan.org/vlc/

  • How do I change the print orientation for PDFs with mixed orientation pages?

    I'm sure this is a fairly basic and easily solvable issue, but I've been searching for a solution and can't find one for the life of me.
    The issue: I'm printing a PDF that will be bound book-style, and the file contains pages with mixed orientations (both portrait and landscape). When I print the file, the landscape pages point the wrong way, to the left of the spine, when they should be pointing down to the right of the spine. I've adjusted the print settings for multiple test rounds, and nothing seems to work. Here's a visualization of the problem (apologies for the bad Paint art):
    What the book is doing now when it prints:
    What I need it to do:
    Here's the caveat: I cannot just rotate all the landscape pages counter-clockwise in Acrobat for ease of printing, because it would remove the ability to scroll through the file quickly in Reader or a Web browser, and the same file needs to be both easily readable digitally AND print correctly.
    Is this adjustment a print setting? Is this a tool I'm overlooking within Acrobat? Is this outside the scope of what is adjustable? All advice is welcome, and please feel free to ask any follow-up questions if I explained my problem unclearly.

    If you are trying booklet printing, try to rotate the pages as needed before you print to the booklet. If you are print booklets without using professional imposition software, then Quite Imposing or Quite Imposing Plus should be considered. I believe they offer a demo version.

  • Changing the print order for payroll checks and payroll deposit advices

    Hello,
    How do you change the print order of payroll checks and deposit advices?
    Thanks
    RW

    Hi there crazytalk,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How to change the country code for Wireless channel usage

    My MacBook country code is set by Japan.
    In this case, I can use only 5.15~5.25 channels from ch#36 to ch48 at 5GHz Band.
    I'd like use the other channels..by other country code.
    How can I change the Wireless card country code?

    The country code is automatically detected and set by your router. Wireless routers use the frequencies specified by the regulatory agencies in the countries in which they are sold.
    There is nothing to change in your MacBook.

  • Changing the printer cartridges for a HP laserjet 2840

    Having a problem with the wheel not going to the next cartridge...there is a message on the display saying "incorrect yellow" but the yellow cartridge has been taken out and it will not go to the next slot. I am out of warranty and need my printer can anyone help??

    I have a similar problem, maybe its the same for you, im my case the printer broke down because the cyan ink cartridge was not properly placed on the printer. An error of “Incorrect Yellow” was prompted on the printer screen because it was the yellow cartridge that ended up on top because the cyan ink got stuck at the bottom. What I did was I opened the printer and lifted the lock for the ink rotator. It’s located on the right side of the rotator if you were facing the printer. It’s a silverish metal in between the group of gears. I lifted it up using a screw driver. I was able to rotate back to the improperly placed ink cartridge and replace it back. properly. When latched properly the printer worked again. I’ve placed the top cover back and its ready for printing again. I got the instructions on how to open the top cover in the link below
    http://h30499.www3.hp.com/hpeb/attachments/hpeb/bsc-413/172137/1/329430.pdf

  • Function module to change the reason code for status in a Opportunuity/lead

    Hi,
    What is the function module to change the opportunity reason.   I was able to change the status using the crm_order_maintain but How can I change the reason for that opportunity.
    Thanks
    naveen

    You can use CRM_ORDER_MAINTAIN and populate the parameter IT_SERVICE_OS
    or use BAPI_OPPORTUNITY_CHANGEMULTI and populate the parameter SERVICE_OS.
    BR,
    Florin

  • My 5510 printer will not print to give me the printer code for e print!

    my printer will not let me print my code so i can set up e print. It keeps saying unable to connect to server? any ideas why?

    How do I find my printer code on my HP5510

  • No printer code for my D110a printer

    I am unable to find the printer code on my d110a printer. Wireless services are enabled on the printer. The code (email address) does not print out or show on the panel. Web services are enabled and I have no problems printing from my laptops?
    When I try to download apps. The printer indicates it cannot connect to the network??? I've tried reinstalling the printer with the same results?

    Mandybear: 
    You need to update the firmware on your printer. 
    Go to: 
    Setup>Preferences and select Product Updates...this will cause the unit to search for and download a firmware update. 
    Allow that update and you should have no problems enabling Web Services.  
    When you enable web services an info sheet will print out...go to the ePrintCenter web site, create an account, and add your printer to your account using the printer code on the left side of the info sheet.   Do that within 24 hours of the info sheet printing out.  If you do it later that 24 hours you'll need to reprint the info sheet to re-enable the printer code for adding it to your account.  
    Once you've added your printer you can configure ePrint, and add/remove/re-order, and configure print apps on your printer. 
    I am an HP employee.

  • How can I change an NC Code for a scrapped SFC

    Is it possible to change the NC COde for a scrapped sfc without changing anything else?

    Hans,
    The only place where you can edit NC data is Edit tab of NC Client if the tab is enabled. However, I doubt that it allows you to change NC Code ID but leave the rest of the collected NC data.
    Regards,
    Sergiy

  • Error when changing a Company Code for a given Cost Center

    Hello Friends ,
                             I'm trying to modify a company code value for a given cost center in KS02 and I get the below error. The error message receommends to change the analysis period ( not sure what it is..) but when I click edit > Analysis period from tool bar I  still get the below message , is there way to get over come this issue ?
    Thanks in advance ,
    Field change Company Code is not possible (transaction data already exists)
    Message no. KS134
    Diagnosis
    To ensure the consistency of existing data, you can only change object Company Code if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
    As transaction data already exists, it is not possible to change objects in this time period.
    Procedure
    If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".

    Thank you Vishal . I have 3 cost centers with 2 having validity period ( from 01/01/1950 to 12/31/9999) and third one had 2 records 12/30/2004 to 12/26/2009 and 12/27/2009 to 12/31/9999 ) for the third one it did allow to change the validty period and I could change the comapny code for my profit center . But for first 2 somehow it doesnt allow to change the validity periods. And when I run some reports against these 2 cost centers to see if there is any activity I dont see any data .
    Could you please give your ideas ?
    Thanks alot .

Maybe you are looking for