Change Trip throws WDDynamicRFCExecuteException with SERVICEKEY_INVALID

Hi All,
I've stumbled across a problem that I've been looking into for a while now and not been able to get to the bottom of. When a user navigates to the my trips and expenses on the ESS applications and either selects a trip and then clicks on change, or creates a new expense trip the application throws an exception of type WDDynamicRFCExecuteException - the cause apparently is that the service key is invalid (SERVICEKEY_INVALID). So far I have:
Checked all services and resources to make sure everything is there and not disabled
Compared with our UAT environment where everything works fine
Checked all the logs (not enough information to point you to the source of the problem)
Checked all connections and made sure all wd applications are up and running
Checked deployment folders for errors
In addition to the above, I have searched SDN, google and serviceplace but with no luck. There are a few threads in the forums and I've been through all of them but none of them really give a solution or cause of the problem. On one of the threads the creator re-installed the xss and ess components. I'd rather avoid that unless I know that this is the problem.
What's even more annoying is that this used to work a couple of months, obviously something has happened between then and now but according to our basis team there have been no updates - at least none that have not been tested or applied to UAT (where everything works), and noone has supposedly been in to the system and made changes...
Anyone stumbled on to this and might know what the problem is, or who can point me in the right direction?
Thanks for your time.
Cheers,
Dion

Hi OJ,
thanks for your reply. The problem is that this is the standard eExpenses wd applicationa and I'm not sure which function module it uses without importing into NWDI/NWDS and checking. But I will have to do that anyway to make some changes so I'll have a look. It's a very strange error and the message in the exception doesn't really point you in the right direction. Lazy programmers
cheers,
Dion

Similar Messages

How can I change the age associated with my daughter's account?

OK I am sure that this is a common issue. Back when my daughter was about 9 or 10 years old, we bought her an iPod Touch. She was too young to have an AppleID of her own, so I set one up for her using an extra gmail accoun that I had, and entered my birthdate/age. A few years later, she received an iPad, and most recently, an iPhone. All of these devices are tied to the same AppleID.
Well, now she will be 13 years old soon, and I would like to switch things to represent reality. She has her own email account, and I believe you can go to My Apple Id to change the Apple ID name and e-mail address. My question is, can we change the age associated with the account?
I hear you saying, "Just create a new AppleID for her." That may end up being the only solution, but I am trying to avoid having two AppleIDs for her to keep up with. She has already purchased a fair amount of content (music and apps) under the existing AppleID, and I am pretty sure from looking at the posts on this Community that you can not transfer content away from the AppleID under which it was downloaded/purchased. And so, if I create a new AppleID, she will have to re-purchase the content to get it all in one place. As she eventually grows up and becomes independent, I would like for he to not have to "start over" with her AppleID.
Any advice or direction to information would be appreciated.

I have a similar situation however a bit more complicated! It seems that when I was setting the birthdate I forgot to change the year so now my seven years old daughter shows up as a two months old! There is no way to change the birthdate because it shows up in light grey when I login into my daughters account and doesn't allow a change! The birthdate can be changed only when the child turns 13 however according to this she will have to be 20 before she can change it to show property 13 and here is where this is getting completely out of hand! Now to make things more complicated I have twin daughters and they came up with their unique but similar Apple ID, so changing one will require to change both Apple IDs! After being on the phone with Apple's customer support for about one hour I talked to a supervisor and the supervisor of the supervisor and their only solution is to create a new Apple ID! Of course in my case I will have to create two new Apple IDs, and I'm considering doing it. However when I started reading it becomes more complicated because I already made their Apple IDs part of my family group. It seems like you're not able to just let go of family member that is less than 13 years of age. You can only transfer it to another family, so Apple is making sure there are no kids left behind It seems like the only option will be to "abandon" the family and then create a new family with the new Apple IDs. If all this sounds bizarre to you it sounds bizarre to me too! If I can just put the kids in the car and drive them to the nearest one hour away Apple Store and have them show their credentials confirming their birthdate I would rather do that than having to spend more and more time with this issue, but that was not an option pointed out by customer support. So folks keep in mind that if you make a mistake your children's age is set in stone until he or she turns 20 if they happen to be seven at the time you made the mistake and no one can change this, even Apple! Now on the positive side I'm glad I didn't do the mistake when she was 13 or she will have to wait until she's 26 Most likely I'll be calling customer support tomorrow again and I will let you know how it went!

How to change Analyzer user password with Administration API?

Hi, I would like to change Analyzer user password with Administration API. Can someone post some sample commands to do the task? I would just like to write an application to change end user's Analyzer password. As I see I would need to do the following: 1. login with admin userid/password 2. execute some method to change password for required userid. I think the input parameter should be userid (of the user I would like to change password) and new password (the new password for the user). 3. logout Can someone post some sample code (commands to execute)? Thanks, grofaty My system: Analyzer Server 7.0.1. Essbase server 7.1 Windows XP SP2 

<blockquote>quote: <hr>Originally posted by: knightrich Hello Mr. Jordan. I would like to exchange some thoughts about "housekeeping" Analyzer reports in preparation for migration from Analyzer 7.0.0.0.01472 to 9.x: ... Did you solved such a problem or do you have an idea if it could be solved with the Admin API methods? ... Migration from 7.00 to 9.x: As we heard last week the "Migration Wizard for Reports" in 9.3 should be able to migrate reports. Do you have experience or more detailed information about that Wizard? Many thanks in advance knigthrich<hr></blockquote> knighrich, I'd like to be more help, but I have no experience with System 9. I did substantial cleanup when we migrated from Analyzer 6 to Analyzer 7.1, and even more cleanup when moving up to 7.2, but our installation is smaller in scale than yours and we didn't need to automate report cleanup. You might be able to get the ownership information you need through the back door, doing a direct query on the database, but simpler might be an export users, at least from 7.0. (This facility probably doesn't exist in system 9; it was dropped in 7.2 in favor of an undocumented API) The export file is an xml file that could easily be parsed to identify reports that have the administrator as user and then a second pass to delete those with otuer ownership as well. As previously suggested, you might be able to get this by a well crafted SQL query against the repository. Procedurally, we have both public reports that have the blessing of management and are widely available, owned by a "public owner", and private reports developed by indivdual users and shared or not. Our team maintains the public reports, but not the private reports. We may be asked to make a previously private report public and take over maintenance of it. I hope that you can find a solution that meets your needs. Certainly a call to customer support to identify a poorly documented feature would be in order.

How do I change phone numbers associated with an iPad?

How do I change phone number associated with my iPad?

Obviously you must have an iPhone in order to associate the phone number with the FaceTime and Messages apps on your iPad. You haven't clearly stated what you want to do other than associate a phone number, so I assume these are the two apps that you want to associate the phone number with.
If you are unable to add the phone number in the settings in either or both of these apps, you may have to sign out of both apps on the Phone and the iPad - and then sign in again on both devices in order to use the phone number for FaceTime and Messages on the iPad.
This kb article explains how to do this in more detail.
http://support.apple.com/kb/HT5538

I have a mac air and an iMac and both have Pages. I use Pages on my air and save all documents to iCloud. I can see them on my iMac but it won't open with Pages. It becomes visible if I change it to open with preview but I can't interact with it.

I have an mac air and an iMac 5k - pages runs on both. I use pages on my air and save all my documents to iCloud drive. I can see the documents on my iMac but some won't open in pages which is bizarre? They will open if I change it to open with preview but then all I can do is read it - I can't add to the document - All I want is to be able to see all my documents on all my devices and to be able to have them sync so I can add to the documents from any of my devices. I also have an iPhone 6 and an iPadair2 but I would be happy just to have the iMac and macair sync for starters. I have folders within folders in my documents,. The folders which contain pdf's and individual files open OK . The one I am having difficulty with is the file which I use for ongoing correspondence - in other words it is quite long - I keep adding to it ( by copying letters in and letters out so I can see a sequential history of what has been going on by scrolling down ) in date order so that it could be 1 - 100 pages long - but I don't think the size is a problem. I don't understand why some folders can open and others not . Has anyone any suggestions please. I have been trying to get this to work for months since iCloud drive came in. It has got much better but it is still not good enough - or maybe it's me?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Is there a way to change the icon associated with icloud account?

Is there a way to change the icon associated with my iCloud account? It's currently a rose and i do not like it.

Welcome to the Apple Support Communities
Are you referring to your iCloud account picture or your user picture?
It looks like you are referring to your user picture. To change it, open System Preferences > Users & Groups, press the picture box and choose the user picture you want from the ones that came by default. If you want to select a different picture stored on your Mac, drag that photo onto the picture box.
If you want to change your iCloud account picture, open http://www.icloud.com and log in with your Apple ID. Then, press your name at the top right of the site and press the user picture. If you put the cursor on the picture box, you will see a button at the top of the box to change your picture

How can I change the email associated with my forum account?

How can I change the email associated with my forum account? I didn't provide my work email to you, but you put it in my account. My forum postings have nothing to do with my personal PC at home. There isn't an option to update it.
This question was solved.
View Solution.

Hi:
Log in and click on your user name, then look at the upper the right side of the page.
Click on the triangle to the left of the "More Resources" section.
This will drop down, and give you options.
Select User Settings.
This will now open a page, and in the light blue type on top, follow it along to Contact Information, click on that, and change your e-mail address to what you want, and hit the blue submit button on the bottom right side of the page.
Paul

How/where do I change the AppleID associated with my computer?

How/where do I change the AppleID associated with my computer?

What do you mean by "change the Apple ID"? Are you trying to get a new ID from the one you currently have or just add a new ID to the computer?

How do i change the name associated with my icloud

how do i change the name associated with my icloud

If you are trying to change the iCloud ID to another ID, go to System Preferences>iCloud, sign out, then sign back in with the ID you want to use.
If you are trying to change the name of your existing iCloud ID and not trying to change to a different ID, you can change the name of the ID as explained here: http://support.apple.com/kb/HT5621. After doing so, you'll need to sign out of the exising ID, then sign back in using the changed ID.

Can I change the name associated with my Apple magic Mouse?

How do I change the name associated with or the name of my Apple Magic Mouse?

setting then mouse then set up blue tooth mouse then control click on the mouse name

How to change the name associated with iCloud email alias??

I had MobileMe on the iPhone with alias email addresses and I liked how it didn’t attach any “name” to an alias. For example, I had MainUserName, then for aliases I would have [email protected], [email protected], etc. When I sent an email from my iPhone using one of the aliases as the "from" no name would be associated with the alias email address. If it was the MainUserName then it would associate it, e.g. Main User <[email protected]> will show up on the "From" field when I sent an email. But with iCloud on the iPhone (and iPad), it’s Main User <[email protected]>, Main User <[email protected], etc., which I don’t want. If anything it should be Alias 1 <[email protected]> or Alias 2 <[email protected]>. Anyway, I don't want any name associated with the aliases, so when I send an email it will simply say [email protected] or just [email protected] with no name association.
It works differently if I access iCloud through a web browser. If I send an email via iCloud on the web, I can customize and have a different name with each alias, e.g., Tom <[email protected]> or Harry <[email protected]> And the customization carries over to the Mail app on my Mac. That would be ideal if the customization carried over to the iPhone and iPad, but I'd be happy if there was no name association with alias email addresses. Hopefully, there's a solution to the iPhone/iPad situation with iCloud as I don't want the name linked with the main iCloud email address linked with all the different email aliases I have.

Can I change the name associated with an ipod on my Mac?
Select the iPod in the iTunes source list, click on its name, and type a new name.
And can there be more than one iPod on one computer?
Yes.
(39352)

How to change the username associated with "Home"?

My wife got a new mac (from her job) and I've taken over her previous machine, a Macbook Pro (2008). I've upgraded the system several times already, and now using OS Lion. My problem is that I want — but haven't figured out how (or it it's possible) — to change the name of "Home" — from (a form of) her name to something else. I'm the only user with administrative privileges, and I thought that would (somehow) change the name associated with "Home" — but no, it has not.
Is this something that can ( or must) be done via Terminal?

dawglover wrote:
At present, I have (sole) administrative control of the computer. But I haven't been able to change the name associated with "Home" to something other than the name originally set by the computer's previous owner/administrator (my wife).
You can't, the original name is squirelled away all over the machine.
The only way to get it to be all yours, is to backup all data files off the machine, hold command option r down on a wired keyboard at boot time connected to a fast Internet connection and use Disk Utility to erase the ENTIRE drive, then reinstall OS X with your AppleID and password into the Macintosh HD partition.
When you reboot, you are greated to the intial install, where you can place your name all over the machine.
When you erase the drive this way all programs are gone, and only those associated with AppleID can be downloaded from AppStore as they are copy protected.

Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

Can i change my old iPad with the new one, i Will pay the difference... Do you have this kind of program?

If you are past the return date, you can sell the older iPad and put the money towards a new one.
Plus, old iPads make great gifts ! ! !

All changes in sales orders with in a week

Hi gurus,
I want to display a report to display all the changes in sales orders with in a week,
Can anybody help me .If anybody already developed this report can you send to me.
regards,
D..

Query table CDHDR and CDPOS with the following fields:
CDHDR-TCODE = VA01 or VA02
CDHDR-UDATE = <specified date range>
Now select from CDPOS where
CDPOS-OBJECTCLAS = CDHDR-OBJECTCLAS
CDPOS-OBJECTID = CDHDR-OBJECTID
CDPOS-CHANGENR = CDHDR-CHANGENR
The rest of the details for the change can be found from the other fields in CDPOS. like tablename, fieldname, old value, new value etc.
Hope this helps.
Sudha

Over some images my imac cursor has changed to a hand with a blue magnifying grid - how to I get back to normal?

Sometimes when moving over an image, mt cursor changes to a hand with a blue magnifying grid. How can I disable this?
Thanks!

Thanks sberman ... unfortunately that option is & has been unticked. It has happened to me two or three times but my memory ain't what it used to be so I can't recall the exact circumstances. It went away by itself this morning after an overnight shutdown so I don't think it can be a "preferences" item. Only thing I had to do this morning was to change trackpad batteries. Maybe low batt power was the cause? Interestingly before I posted the query here, I was searching all over the net for a similar problem and could not find even one related post or comment anywhere. And this post has 53 views with only your reply so maybe it is a spurious / unique problem? I'll leave the post for now as the problem seemed to have fixed itself and if it happens again, I will re-try everything first, including checking batteries. Somehow I thought mnaybe I had hit a keyboard shortcut in error but I can't find any reference at all to this kind of behaviour. Wierd!! But thanks very much for your reply!!

Change Trip throws WDDynamicRFCExecuteException with SERVICEKEY_INVALID

Similar Messages

Maybe you are looking for