Changes are not showring up in PO User-Exit (MM06E005)

Hello Experts.
Iu2019m working on PO u2018MM06E005u2019 User exit. Iu2019m trying to capture PO Header, PO Items, Vendor General Data & Vendor PO Data. Iu2019ve got all the data what I need but whenever I made changes I donu2019t know for what reason those changes in Vendor PO Data are not showing up in I_LFM1 table. Since I_LFM1 is internal table of Vendor PO Data I think it should show the changes which I made but it doesnu2019t and still shows the same old data. Same problem is happening in I_EKPO & E_EKKO. Also at the end of transaction that changes get saved. Does anybody can tell me what am I doing wrong or what causing this problem?
Thanks.

You may look at
- OSS [Note 407975 - MM06E005: Collective note: Examples for implementation|https://service.sap.com/sap/support/notes/407975]
- OSS [Note 496083 - FAQ: Customer enhancements (User Exits) in purchasing|https://service.sap.com/sap/support/notes/496083]
- [search sdn for MM06E005|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mm06e005&adv=false&sortby=cm_rnd_rankvalue#]
Regards

Similar Messages

With Adobe Muse when I make a change I have a second Admin user how do we make sure these changes are not overridden

With Adobe Muse when I make a change I have a second Admin user how do we make sure these changes are not overridden

If you're both using Muse then it's no different than if you were both using PS, AI, Word, etc. You need to use a mechanism to enable you to both have access to the latest version of the .muse file (i.e. Creative Cloud Files folder, Dropbox, file server location, etc.).
Changes made in the browser will sync back to the .muse file. Changes made in Muse are saved in the .muse file and if you're going to work on the site in Muse on two different machines then you need to have the up-to-date .muse file on the other machine.

Changes are not reflecting in the discoverer workbook

Hi ,
I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
Appreciate your help !!
Discoverer Version 4i
Thanks ,
Vijay

Hi West,
Thanks for the reply.
I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
Thanks,
Vijay

Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

SRM PO Changes are not transferred to Back end

Hi All,
I have a problem in PO changes.
We are using extended classic scenario. User create PO in the portal and the PO will be transferred to the back end R/3 via RFC. Earlier in 4.7 we the PO's are updated with the changes.
Recently we have upgraded to ECC 6.0. Now the changes are not transferable.
Could any one help me to fix this issue and please give the steps that i need to check for fixing it.
Regards
Pratap J

Hi Thaigo,
Thanks for your input. please go through the below.
These are the table entries in BBP_BACKEND_DEST
Client Logical system Destination                        System type RFC possible Local FI validation
500    EP1CLNT500     EP1CLNT500                         EBP_5.0                  X      0
500    RP1CLN500D     RP1CLNT500DIAG                     R/3_4.70    X                   0
500    RP1CLNT500     RP1CLNT500                         R/3_4.70    X                   0
In the table, it was still 4.70. So it needs to changed to ERP_4.0 ?
Regards
Pratap J

Problem in building and changes are not reflecting

Hi Team,
When I am building my DC, It is building without any errors,
But it is not showing anything like build failed yes or no.
I feel Its not building my DC,bcoz in tasks its not showing my DC name.
When I deploy, It is deploying without any errors, but my changes are not effecting.
What could be the problem ?
Thanks in advance.
Regards,
Naresh

Hi Ayyapparaj,
Thank you very much for your reply.
I have reverted the activity i have created for the DC, and deleted the activity.
I have deleted that DC from my NWDS also.
Now I have created the project again, with new activity.
And made the changes, build and deploy.
But still the changes are not effected.
When I build my DC, It is not showing any errors in tasks,
but My DC name is not there in tasks.
I feel my Dc is not building at all.
If some other user is created any activity on same DC but not checked in, then will create this kind of problem ??
I am not sure , where it is going wrong?
Its not showing like build failed---NO.
Its not showing any errors also.
Build is happening within 2 seconds.
Can you please sort it out..??
Thanks in advance.
Regards,
Naresh

Trigger changes are not committing to the database

I have 9iAS and 9i DB both on my laptop.
I am having a problem in which a trigger run off a WHEN_BUTTON_PRESSED function is not committing the changes to the database. In the trigger I have:
1 record insert into table A.
1 record update to table B.
1 record insert into table C.
1 delete from table D.
None of the data is related.
I have tried various combinations of the below to get the changes to commit:
POST;
COMMIT_FORM;
Exit_Form(NO_COMMIT, NO_ROLLBACK);
MESSAGE('Got past COMMIT');
COMMIT;
CLEAR_FORM(NO_COMMIT);
ENTER_QUERY;
I am getting varying amounts of "FRM: 40508 Oracle Error: Unable to INSERT record" statements. Even so, many times the form would act as if the changes had been properly applied. But when I did a separate DB verification, I would see that the changes are not being committed. Also, most of the time the changes would also be reflected in the calling form queries, but when I exit, all changes are rolled back no matter how many commit stmts are in the trigger.
I have finally gotten the form to do what I want to do (the 4 steps noted above), but I had to add a FORMS_DDL('COMMIT'); stmt and I am still getting a FRM 40508, but at least the changes are appearing in the db.
Any ideas on why so many troubles in getting the changes to commit??? I have spent a ton of hours trying "what ifs" to see what might work. Also, this trigger is the only real "code" in the forms.
Kim

Brett -
You're probably right about the intention, but this is a place where people can come and share styles, ideas, and coding tricks, I don't understand why someone would say that. Additionally, I had a professor who was a complete momo that said that all the time (consequently, his lax attitude towards teaching crippled the IS program where I graduated and most likely will cause it to no longer be available). It's a personal peeve of mine, just to let you know where I was coming from.
Secondly, the problem I'm having may have to do with what you said, however I can't be sure. To give a better description of my scenerio, I created a form that allows the user to load information about an employee by querying a SSN. Most of this information is for display only. Six fields are available to be updated and I wrote a DML UPDATE statement that I placed inside a WHEN-BUTTON-PRESSED trigger. However, these changes won't be written to the DB because Forms is attempting to write my entire datablock, instead of just following the specified DML statements. I'm at a loss as to why this would happen, but for simplicity's sake, I would listen to ideas of how to suppress this from happening so only my statements are used when updating the DB. If you can help, thank you, if not, then thank you for your time.
Steve

BADI Changes are not taking effect

Hi,
I have done few changes at BADI...but those changes are not taking effect...
I activated everything...wat might b the problem?
Regards,
venkat
Moderator message: too vague, help not possible, please describe problems in all technical detail if posting again.
Edited by: Thomas Zloch on Feb 23, 2011 3:02 PM

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

CVI 2013 UIR changes are not implement on subsequent build.

I have noticed that on a compiled project if you change the visibility of a UIR object, these changes are not reflected on the subsequent build. There are files that are set to recompile but in least some cases the change to the UIR is not reflected by a "build" (or Ctrl M).
Using the new "Rebuild" command from the pull down menu does reflects the expected behavior (the changes to the UIR are seen).
This may be considered normal operation and / or been previously reported, but it was new to me.

Hello blakney, CVI-User,
blakney, it sounds like the bug you've reported originated in the Patch f1. The bug id is 433769 and the fix is likely to be included in our next release.
Two workarounds for the issue are:
- Use Rebuild every time you make a UI change (if you're using the option).
- Disable Embed project .UIRs when in Debug configuration and only embed them when you create your release product. The option to embed is configuration-dependent, meaning you can set the debug and release behaviors separately.
Regarding your latter post, [I find that local path UIRs sometime get "lost" in Release64 builds. They link fine in Debug64 mode though.], could you please attach a sample project?
CVI-User, your case might fall under the same use-case (id, 433769). However, could you please attach a sample project, so we can double-check?
Thank you and best regards,
= Nelu F. || National Instruments.

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully received

Try using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie

I've been editing images with ease for a long time but now the changes are not being saved.

I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4075 I tried the steps mentioned above but the changes are not being saved.

I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand.

Changes are not reflected in Script output

Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.

Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

Changes are not showring up in PO User-Exit (MM06E005)

Similar Messages

Maybe you are looking for